2GIG GC3 Frequently Asked Questions

How Do I Enroll a Z-WAVE Lock in a 2GIG GC3?
A Z-Wave lock can be added to the GC3 using the enroll function in the panel's Z-Wave programming menu. You will need your installer code to access this menu.
Added:

How Do I Connect My iPhone to a 2GIG GC3?
An iPhone can be connected to a 2GIG GC3 system through the Alarm.com platform. Your system will need to be activated with Alarm.com in order to do this.
Added:

How Does Dual Path Monitoring Work on a 2GIG GC3?
When Dual Path communication is enabled on the GC3, it sends all signals meant for the monitoring station via both paths simultaneously. Alarm.com acknowledges and forwards whichever signal is received first, and ignores the duplicate. This ensures that the fastest path available is always used.
Added:

How Do I Connect My 2GIG GC3 to My Garage Door?
A 2GIG GC3 can connect to a garage door by using the GD00Z-4 Z-Wave garage door kit. Your GC3 can control your garage door once the GD00Z-4 has been installed.
Added:

Can WIFI be Primary with Cellular as Backup on a 2GIG GC3?
When WIFI is available on the GC3, signals are sent via both WIFI and Cellular. Alarm.com acknowledges whichever is received first, forwards that signal to the monitoring station, and ignores subsequent signals. This way, signals always use the fastest path available for communication.
Added:

Where Should I Place My 2GIG Door and Window Sensor?
A 2GIG door and window sensor should be placed on a door or window frame about half an inch from its magnet. It must also be within range of the 2GIG panel.
Added:

Which Sensors are Compatible with 2GIG?
Many sensors are compatible with 2GIG security panels. In addition to the 2GIG brand of wireless sensors, Honeywell 5800 Series sensors can be used as well.
Added:

How Do I Add a Honeywell Siren to a 2GIG GC3?
The 2GIG GC3 panel can have a Honeywell hard-wired siren installed directly to its circuit board. A siren can also be connected through a hard-wired relay.
Added:

How do you add a 2GIG PIR1-345 to the 2GIG GC3?
The 2GIG PIR1-345 can be added to the 2GIG GC3 security panel through system programming. You will need the installer code to access system programming.
Added:

How do you add a 2GIG PAD1-345 to the 2GIG GC3?
The 2GIG PAD1-345 wireless keypad can be added to the 2GIG GC3 through the systems keypad programming. Learn how to add a 2GIG PAD1-345 to the GC3 system.
Added: