Honeywell Lyric Gateway Frequently Asked Questions

How Do I Program a SiXPIR to the Lyric Gateway?
In order to enroll a SiXPIR with a Lyric Gateway system, you must contact your alarm monitoring company and have them put the Lyric Gateway into learn mode.
Added:

How Do I Program a SiXFOB to a Lyric Gateway?
The only way to learn-in a SiXFOB with a Lyric Gateway is to have your monitoring company remotely put the Gateway into learn mode and then enroll the device.
Added:

How Do I Program a 5800RP to a Lyric Controller or a Lynx Touch?
A 5800RP is programmed to a Honeywell security system by assigning it to a zone. This will provide the panel with notices regarding the status of the 5800RP.
Added:

How do I program a SiXSmoke to a Lyric Gateway?
Since the Lyric Gateway doesn't provide access to user programming, you must contact your alarm monitoring company to program a SiXSmoke sensor to the device.
Added:

How Do I Connect My iPhone to a Lyric Gateway?
Users can connect their iPhone to a Lyric Gateway after configuring the Total Connect 2.0 or MyHome Gateway apps. Learn how to connect an iPhone to a Gateway.
Added:

Why Is My Lyric Gateway Always in Not-Ready to Arm Mode?
The Honeywell Lyric Gateway is in "not ready to arm" mode if a zone is faulted, or if a zone has a tamper switch activated. Learn how to resolve these issues.
Added:

Lyric Gateway vs 2GIG GC3
The Gateway and the 2GIG are different all-in-one systems. The Gateway lacks integrated digital display, and must be monitored by a Honeywell dealer. Read on.
Added:

How Do I Set Up Night Stay Zones on a Lyric Gateway?
An alarm company who is monitoring the Lyric Gateway can configure motion zones to have the Night Stay attribute. Learn how to setup Night Stay Zones.
Added:

How Do I Register the Sim Card in a Lyric Gateway Cellular Communicator?
The sim card in a Lyric Gateway Cellular Communicator can only be registered by a Honeywell dealer. Learn how to register the cellular communicator's sim.
Added:

If I'm Locked Out How Do I Get Back Into Programming on a Lyric Gateway?
There is no local user access to programming on the Lyric Gateway, instead, all programming is done remotely. Learn how to access programming on Gateway.
Added: