IQ5 Hub with AT&T LTE Frequently Asked Questions
How Do I Check the Battery Status on the IQ5 Hub System?
Check the battery status on the IQ5 Hub from the Settings Tray or the About page. See the status of Disconnected, Charging, or Full and the level percentage.
How Do I Add a 2GIG Audio Detector to the IQ5 Hub System?
Learn how to add the 2GIG-FF100-345 audio detector to the IQ5 Hub. Requires a 345 MHz daughter card. Enroll via Auto Learn and select Smoke Detector type.
How Do I Connect an IQ Keypad PG to the IQ5 Hub System?
Learn how to connect the IQ Keypad PG to the IQ5 Hub. The PowerG keypad enrolls via Auto Learn and adds a remote arming and disarming point to your system.
How Do I Add an IQ Smoke and Heat Detector to the IQ5 Hub?
Learn how to add the QS5130-840 IQ Smoke and Heat detector to the IQ5 Hub. Enroll via Auto Learn — no daughter card needed, S-Line is built into the panel.
How Do I View Panel Camera Photos on the IQ5 Hub System?
See panel camera photos on the IQ5 Hub on the Panel Camera Page. The panel captures a disarm photo at each disarm, plus an alarm photo during an alarm event.
How Do I Add a New Key Fob to the IQ5 Hub Alarm System?
Add a key fob to the IQ5 Hub under Installation, Devices, Security Sensors. Choose Auto Learn Sensor, press a key fob button, set the type to Keyfob, and save
How Do I Run a Sensor Test on the IQ5 Hub Alarm System?
Run a sensor test on the IQ5 Hub from System Tests in Advanced Settings. Trip each sensor to see its dBm signal strength, packet count, and a live signal graph.
How Do I Safely Power Down the IQ5 Hub Security System?
Power down the IQ5 Hub safely from Advanced Settings, Power Down. Wait for the panel LEDs to turn off, then disconnect the power to avoid any data corruption.
How Do I Add a Temporary Guest User Code on the IQ5 Hub?
Add a temporary guest code on the IQ5 Hub from User Management in Advanced Settings. Add a user, set the User Type to Guest, enter a name and code, and save.
How Do I Change the Installer Code on the IQ5 Hub System?
Learn how to change the Installer Code on the IQ5 Hub. Go to Advanced Settings, touch User Management, and use the pencil icon next to Installer to edit.
Check the battery status on the IQ5 Hub from the Settings Tray or the About page. See the status of Disconnected, Charging, or Full and the level percentage.
Added:
How Do I Add a 2GIG Audio Detector to the IQ5 Hub System?
Learn how to add the 2GIG-FF100-345 audio detector to the IQ5 Hub. Requires a 345 MHz daughter card. Enroll via Auto Learn and select Smoke Detector type.
Added:
How Do I Connect an IQ Keypad PG to the IQ5 Hub System?
Learn how to connect the IQ Keypad PG to the IQ5 Hub. The PowerG keypad enrolls via Auto Learn and adds a remote arming and disarming point to your system.
Added:
How Do I Add an IQ Smoke and Heat Detector to the IQ5 Hub?
Learn how to add the QS5130-840 IQ Smoke and Heat detector to the IQ5 Hub. Enroll via Auto Learn — no daughter card needed, S-Line is built into the panel.
Added:
How Do I View Panel Camera Photos on the IQ5 Hub System?
See panel camera photos on the IQ5 Hub on the Panel Camera Page. The panel captures a disarm photo at each disarm, plus an alarm photo during an alarm event.
Added:
How Do I Add a New Key Fob to the IQ5 Hub Alarm System?
Add a key fob to the IQ5 Hub under Installation, Devices, Security Sensors. Choose Auto Learn Sensor, press a key fob button, set the type to Keyfob, and save
Added:
How Do I Run a Sensor Test on the IQ5 Hub Alarm System?
Run a sensor test on the IQ5 Hub from System Tests in Advanced Settings. Trip each sensor to see its dBm signal strength, packet count, and a live signal graph.
Added:
How Do I Safely Power Down the IQ5 Hub Security System?
Power down the IQ5 Hub safely from Advanced Settings, Power Down. Wait for the panel LEDs to turn off, then disconnect the power to avoid any data corruption.
Added:
How Do I Add a Temporary Guest User Code on the IQ5 Hub?
Add a temporary guest code on the IQ5 Hub from User Management in Advanced Settings. Add a user, set the User Type to Guest, enter a name and code, and save.
Added:
How Do I Change the Installer Code on the IQ5 Hub System?
Learn how to change the Installer Code on the IQ5 Hub. Go to Advanced Settings, touch User Management, and use the pencil icon next to Installer to edit.
Added: