IQ5 Hub with AT&T LTE Frequently Asked Questions
How Do I Enable Scenes Support on the IQ5 Hub Alarm System?
Enable Scenes Support on the IQ5 Hub in Installer Settings. It adds a Scenes icon to the panel so you can run your own Alarm.com scenes from the touchscreen.
How Do I Change the Door Lock Page on the IQ5 Hub System?
Turn the Door Lock Page on or off on the IQ5 Hub under Installer Settings. It is enabled by default and appears once a door lock is added to the panel here.
How Do I Enable the Home Control Page on the IQ5 Hub System?
Enable the Home Control Page on the IQ5 Hub under Installer Settings. It adds an automation control page on the panel once two types of smart devices are added.
How Do I Enable the Check-in and Check-out on the IQ5 Hub?
Enable Check-in/Check-out on the IQ5 Hub under Installer Settings. It lets a visiting nurse check in and out with a panel photo, through the Wellness Page.
How Do I Change the SIA Limits Setting on the IQ5 Hub Panel?
Change SIA Limits on the IQ5 Hub under Installer Settings. It is enabled by default and constrains the entry, exit, and dialer delay ranges for compliance.
How Do I Set Up the Solar Install Tracker on the IQ5 Hub?
Set up the Solar Install Tracker on the IQ5 Hub under Installer Settings. Solar integrators enter their ID, email, and project code to set up the Solar Page.
How Do I Enable the Noise Detector Popup on the IQ5 Hub?
Enable the Noise Detector Popup on the IQ5 Hub under Installer Settings. Turn it on so the panel shows an on-screen alert whenever a noise event is detected.
How Do I Set the Noise Detector Duration on the IQ5 Hub?
Set the Noise Detector Duration on the IQ5 Hub under Installer Settings. Choose how long the loud noise must last before an alert, with 20 minutes as default.
How Do I Set the Ambient Noise Threshold on the IQ5 Hub?
Set the Ambient Noise Threshold on the IQ5 Hub in Installer Settings. Choose 75 to 95 dB for when the panel alerts you on loud noise. It is 85 dB by default.
How Do I Enable Ambient Noise Detection on the IQ5 Hub?
Enable the Panel Ambient Noise Detector on the IQ5 Hub in Installer Settings. The panel mics alert on loud noise above a set dB threshold, great for rentals.
Enable Scenes Support on the IQ5 Hub in Installer Settings. It adds a Scenes icon to the panel so you can run your own Alarm.com scenes from the touchscreen.
Added:
How Do I Change the Door Lock Page on the IQ5 Hub System?
Turn the Door Lock Page on or off on the IQ5 Hub under Installer Settings. It is enabled by default and appears once a door lock is added to the panel here.
Added:
How Do I Enable the Home Control Page on the IQ5 Hub System?
Enable the Home Control Page on the IQ5 Hub under Installer Settings. It adds an automation control page on the panel once two types of smart devices are added.
Added:
How Do I Enable the Check-in and Check-out on the IQ5 Hub?
Enable Check-in/Check-out on the IQ5 Hub under Installer Settings. It lets a visiting nurse check in and out with a panel photo, through the Wellness Page.
Added:
How Do I Change the SIA Limits Setting on the IQ5 Hub Panel?
Change SIA Limits on the IQ5 Hub under Installer Settings. It is enabled by default and constrains the entry, exit, and dialer delay ranges for compliance.
Added:
How Do I Set Up the Solar Install Tracker on the IQ5 Hub?
Set up the Solar Install Tracker on the IQ5 Hub under Installer Settings. Solar integrators enter their ID, email, and project code to set up the Solar Page.
Added:
How Do I Enable the Noise Detector Popup on the IQ5 Hub?
Enable the Noise Detector Popup on the IQ5 Hub under Installer Settings. Turn it on so the panel shows an on-screen alert whenever a noise event is detected.
Added:
How Do I Set the Noise Detector Duration on the IQ5 Hub?
Set the Noise Detector Duration on the IQ5 Hub under Installer Settings. Choose how long the loud noise must last before an alert, with 20 minutes as default.
Added:
How Do I Set the Ambient Noise Threshold on the IQ5 Hub?
Set the Ambient Noise Threshold on the IQ5 Hub in Installer Settings. Choose 75 to 95 dB for when the panel alerts you on loud noise. It is 85 dB by default.
Added:
How Do I Enable Ambient Noise Detection on the IQ5 Hub?
Enable the Panel Ambient Noise Detector on the IQ5 Hub in Installer Settings. The panel mics alert on loud noise above a set dB threshold, great for rentals.
Added: