Small Business Security Systems Frequently Asked Questions

How Do I Toggle WIFI/IP and GSM as Primary on the Lyric Controller?
There is an option for setting the communication path in the Installer Tools Menu of the Resideo Lyric Controller. Learn how to set the Lyric Controller communication path.
Added:

Why Can't I Disable Auto-Stay Arming For My VISTA-128BPT?
Version 10.0 of the VISTA-128BPT had an error that made it impossible to disable Auto-Stay Arming for TC2. Learn how you can disable Auto-Stay Arming for your VISTA-128BPT.
Added:

How Do I Clear a Low Battery in My Honeywell Vista P Series Panel?
To clear a low battery message, you must first remedy the low battery condition. This may require a battery replacement. Learn to clear a low battery on the Vista P-Series Panels.
Added:

How Do Alarm Systems Work?
A sensor sends a signal to a panel whenever it is faulted. Depending on the zone settings, the panel will then send out a signal to a central station. Learn how alarm panels work.
Added:

How Do I Learn a 5808W3 Into a Qolsys IQ Panel 2 Plus?
A Honeywell 5808W3 Smoke and Heat Detector can be used with the legacy 345 MHz version of the Qolsys IQ Panel 2 Plus. Find out how to learn a 5808W3 into an IQ Panel 2.
Added:

How Do I Deactivate My Alarm System?
You must deactivate your system with your existing alarm company if you want to bring it to a new company. New equipment may be needed. Learn how to deactivate your alarm system.
Added:

How Do I Use Resideo's New LynxTouch-MSD tool to Update my LynxTouch Panel?
Power the panel down. With the current firmware on the SD card, load the card into the tool. Attach it to the panel's edge connector, and power up. Learn to update the LynxTouch.
Added:

How Do I Receive Sensor Notifications From My Lyric Alarm System in Apple HomeKit?
To receive notifications for a sensor in HomeKit, it must be enrolled with the Lyric. Only certain Response Types provide notifications. Learn how to use your Lyric with HomeKit.
Added:

How Do I Turn Off Arm-Confirm on a Honeywell Lyric Alarm System?
The Arm-Confirm option for the Lyric is found in the Sounder Menu. Turning this option off will stop a loud tone when Arming Away using a fob or keypad. Learn about Arm-Confirm.
Added:

What Does IP Fault Time Setting Do On a Honeywell Lyric Security System?
A good way to know if your Lyric Panel lost its WIFI connection is to use the IP Fault Time Setting. Learn about the IP Fault Time Setting and how it can inform you about IP loss.
Added: