Apartment Security Systems Frequently Asked Questions

How Do I Use Resideo's New LynxTouch-MSD tool to Update my LynxTouch Panel?
Power the panel down. With the current firmware on the SD card, load the card into the tool. Attach it to the panel's edge connector, and power up. Learn to update the LynxTouch.
Added:

How Do I Turn Off Arm-Confirm on a Honeywell Lyric Alarm System?
The Arm-Confirm option for the Lyric is found in the Sounder Menu. Turning this option off will stop a loud tone when Arming Away using a fob or keypad. Learn about Arm-Confirm.
Added:

What Does IP Fault Time Setting Do On a Honeywell Lyric Security System?
A good way to know if your Lyric Panel lost its WIFI connection is to use the IP Fault Time Setting. Learn about the IP Fault Time Setting and how it can inform you about IP loss.
Added:

What Is in Installer Programming on the Honeywell Lyric Alarm System?
The Lyric Alarm System has an Installer Programming Menu that is used for making major changes to the system's settings. Learn about the Lyric Installer Programming Menu.
Added:

Can I Update the Firmware On a Qolsys IQ Panel 2 Alarm System?
It is very easy to apply new firmware updates to a Qolsys IQ Panel 2. This is used for unlocking new features and functions. Learn how to firmware update the IQ Panel 2.
Added:

How Do I Silence the Exit Delay on a Honeywell Lyric Alarm System?
The Lyric has a silent exit option when Arming Away. Choosing this option will silence the system during the Exit Delay countdown. Learn about the Honeywell Lyric Controller.
Added:

How Do I Factory Reset My Honeywell L7000?
The L7000 has menu option in Installer Tools called "Default Config", which restores factory default settings. The whole panel will need to be reprogrammed. Learn about the L7000.
Added:

How Do I Successfully Update The 2GIG Easy Updater Tool?
First you must update the updater tool, then plug it into the 2GIG Go!Control panel to be updated and allow the update to run. Learn to update the 2GIG Go!Control panel.
Added:

Can I Change the Master Code Using the Installer Code on a Honeywell Lyric?
The Lyric System allows users to use the Installer Code to reset the Master Code to its default of 1234. They can then use that code to change the MC. Learn about the Lyric Panel.
Added:

How Do I Add a Qolsys IQ Remote To The IQ Panel 2 In Access Point Mode?
Turn on AP Mode in the Qolsys IQ Panel 2. Set the SSID and Password, and join the IQ Remote to this network. Finally, pair the IQ Remote with the Panel and verify operating range.
Added: