Frequently Asked Questions

Why Do I Get Only One Arming Notification, but Two Disarm Notifications from ADC?
If you use an SEM Communicator to connect your system with Alarm.com, you will get two disarm notifications from ADC. Learn about the Alarm.com SEM Communicators.
Added:

Why Do I Have a Trouble Condition on One of My 5800C2W Zones?
The Honeywell 5800C2W shows trouble conditions for low battery, supervision loss, AC loss and cover tamper. It supervises on the lowest calibrated zone. Learn about the 5800C2W.
Added:

How Do I Walk Test a SiXPIR?
The easiest way to walk test a SiXPIR is to activate Walk Test Mode from the Lyric Panel. You can also activate it using the flashlight method. Learn how to Walk Test a SiXPIR.
Added:

Is the Qolsys IQ Siren Compatible with a 2GIG GC3 Alarm System?
The Qolsys IQ Siren learns-in with a 2GIG GC3 Alarm System as a standard Z-Wave device. It will automatically activate when the panel goes into alarm. Learn about the IQ Siren.
Added:

How Many Scenes Are Supported with the Honeywell VAM and Tuxedo Touch WIFI?
The VAM supports 20 Total Connect 2.0 scenes and 10 local scenes. The Tuxedo Touch WIFI supports 20 Total Connect 2.0 scenes and 30 local scenes. Learn about smart home scenes.
Added:

How Do I Disable Auto-Stay Arming on a Honeywell LYNX Touch System?
Auto-Stay Arming will have a LYNX Touch revert to Arm Stay mode if no entry/exit zone is faulted during the exit delay period while Arming Away. Learn how to disable this feature.
Added:

How Do I Disable Auto-Stay Arming on a Honeywell VISTA System?
Auto-Stay Arming is programming option *84 on a Honeywell VISTA System. Find out how to disable this option so Arm Away mode activates without faulting an entry/exit zone.
Added:

How Do I Disable Auto-Stay Arming on the 2GIG GC3?
The Auto Stay option within Panel Programming is Q14. You can enable or disable this option by accessing the menu. Learn to disable Auto-Stay Arming for the 2GIG GC3.
Added:

How Do I Disable Auto-Stay Arming on the 2GIG GC2?
The Auto-Stay Arming option for the 2GIG GC2 is Question 26 within the System Configuration Menu. Find out how to disable Auto-Stay Arming on the 2GIG GC2 System.
Added:

How Do I Disable Auto-Stay Arming on the Qolsys IQ Panel 2?
Auto-Stay Arming reverts the system to Arm Stay mode if no entry/exit zone is faulted during the exit delay period when Arming Away. Learn how to disable this feature on the IQ2.
Added: