Frequently Asked Questions

Will Interlogix/GE Sensors Work on an Interlogix Simon XT?
Interlogix/GE Sensors operate at a wireless frequency of 319.5 MHz. This is the same wireless frequency used by the Interlogix Simon XT System. This makes Interlogix/GE Sensors compatible with the Interlogix Simon XT System. Learn more about choosing sensors for an Interlogix Simon XT.
Added:

Can I Connect to the Interlogix Simon XT w/ an iPad?
An iPad can use the Alarm.com Mobile App to connect with an Interlogix Simon XT Alarm System. This app is available for free download from the App Store. The Simon XT must have an active cellular communicator in order to sync with Alarm.com. Learn more about the Alarm.com Mobile App.
Added:

Can I Use More than One Keypad with an Interlogix Simon XT?
The Simon XT System can support up to four different touchscreen keypads. These devices will provide additional points of access for the Simon XT System. Additionally, these keypads can be used to control any programmed Z-Wave devices. Learn more about the Simon XT and external keypads.
Added:

How Do I Add a Key Fob to an Interlogix Simon XT?
A key fob is enrolled with an Interlogix Simon XT through the System Programming Menu. With the system in its learn more, press and hold the top two buttons on the key fob. This will enroll it with the system. You must then adjust its settings. Learn more about using a key fob with a Simon XT.
Added:

How Do I Add a Wireless Zone to an Interlogix Simon XT?
Wireless zones for an Interlogix Simon XT are configured through the System Programming Menu. With the system in its learn mode, activate the sensor tamper to learn it in. Then configure the settings for that zone. Learn how to enroll a wireless sensor with an Interlogix Simon XT System.
Added:

How Do I Add Additional User Codes to an Interlogix Simon XT?
The Simon XT System will support up to eight different user codes. These codes are used for arming and disarming the panel, and they are set up through System Programming. You will need to know the Master Code for the system to create new user codes. Learn how to set up user codes on a Simon XT.
Added:

Will Total Connect Work w/ an Interlogix Simon XT?
Total Connect is an interactive service platform that is used exclusively with Honeywell Alarm Systems. Since the Interlogix Simon XT is not manufactured by Honeywell, it cannot use the Total Connect service. But the Simon XT can use Alarm.com instead. Learn more about the Simon XT and Alarm.com.
Added:

How Do I Control Lights w/ an Interlogix Simon XT?
The Simon XT can interface with Z-Wave lights after a Z-Wave controller has been added to the system. The controller comes integrated with the Alarm.com cellular module. In order to integrate with Z-Wave, the Simon XT needs an active cellular plan. Learn more about using Z-Wave with a Simon XT.
Added:

Is an Interlogix Simon XT Z-Wave Compatible?
An Interlogix Simon XT can only support Z-Wave devices if a Z-Wave controller is added to the system. This addition comes in the form of a cellular module with an integrated Z-Wave Controller. Once Z-Wave is added, it can be controlled in various ways. Learn how to use Z-Wave with a Simon XT System.
Added:

How Do I Connect an Android to an Interlogix Simon XT?
An Android device can use the Alarm.com Mobile App to connect with a Simon XT. The user will need to have an active Alarm.com account with a synced Simon XT System to do this. The panel must have cellular service to work with Alarm.com. Learn how to connect an Android device with a Simon XT.
Added: