August 2023 Archives

It is likely that a number of Alarm Grid customers will be affected by Hurricane Idalia, particularly in Florida, Georgia, and South Carolina, based on current modeling. Our monitoring partner, CMS, let us know what steps they were taking to prepare for the storm. We'll lay them out below.

At approximately 5:00 am Wednesday, August 30 Hurricane Idalia became a Category 4 hurricane. According to the Saffir-Simpson Hurricane Wind Scale, a Category 4 rating means winds of 130 - 158 MPH (209 - 251 km/hr). At these speeds, catastrophic damage will likely occur in some areas. Well-built frame structures will likely sustain damage, in some cases extensive damage, to roofs and exterior walls. Trees may snap, or be uprooted, and power poles may also snap. Power outages can be widespread and prolonged.

In response to the expected surge in activity surrounding Hurricane Idalia, CMS has implemented the following measures:

Increased Staffing:

At the Longwood, FL and Manasquan, NJ locations, CMS has increased staffing for the duration of this weather event. In spite of this fact, there is still the possibility that callers to the monitoring station may experience longer than normal hold times.

Partitioning by Location:

Per CMS, "In order to more effectively manage alarm traffic, the CMS Operations team will be transitioning all accounts located in the affected areas to a storm partition. Please understand first responders will no longer respond to dispatches from CMS once sustained winds reach 45 mph." This is a policy of the responding agencies and is outside of CMS or Alarm Grid's control.

Redundancy:

Redundancy is baked into CMS' infrastructure. This is not a special storm-related preparation, but a 24/7/365 way of life. CMS operates three (3) separate monitoring centers in Florida, New Jersey, and California. All are UL-Listed and FM (Factory Mutual) approved. These monitoring centers are connected to one another with the latest in communication technology. This allows CMS to load-balance any increase in activity. It also removes the possibility of a single point of failure taking down operations.

If any of the three (3) centers experience a disaster, each center is backed up by two (2) generators as well as uninterruptable power supplies. Any of the three centers can reroute alarm traffic to the other two centers if the need arises.

Experience:

With over 35 years in business, being founded and headquartered in Florida, and with one of their monitoring centers being located in Florida, CMS operators have seen a lot! They've experienced hurricanes, both personally and in their profession. They are dedicated to keeping their dealers, their customers, and their employees safe.

Our US monitoring station partner, Criticom Monitoring Services (CMS) announced its partnership with Intrado to take advantage of their Text-To-911 (NG911) feature. This allows CMS to send alarm notifications to the authorities via text, rather than requiring a voice call from an operator.

Intrado is a telecommunications company that specializes in public safety communication. They work with PSAPs (Public Safety Answering Points) to improve the delivery of calls for service. A PSAP is where 911 calls are usually routed. It can be a separate entity, or located within a particular jurisdiction's telecommunications center. Many years ago when I was a dispatcher, 911 calls in the Louisville area were received by the PSAP office and then routed to the various police, fire, or EMS dispatch centers. If the PSAP was overrun, their calls rolled over to our call center.

Traditionally, when an alarm signal is received by the monitoring station, the signal goes to a special receiver. From there, an automation software package turns that signal into plain text that the operator then uses to process the signal. This may include calling the end-user to verify if authorities are needed before dispatch, or dispatching immediately.

Up until now, when the central station operator needed to dispatch, they manually called the authorities and relayed the appropriate information. This process only takes a few minutes, usually, but when you're waiting for the authorities in an emergency situation, minutes can feel like hours.

With this new integration, information on alarms that require dispatch is sent to participating PSAPs via text. And this is not a dump-and-run situation like the old voice dialers of yore. The text conversation is two-way. The PSAP can request additional information, and the central station operator can continue to provide information until the PSAP closes the chat. This allows the information on this particular incident to get into the hands of those who are in the best position to help much more quickly and accurately than ever before.

Even with all the improvements in alarm technology in recent decades, there are still times, such as during heavy storms, when a lot of alarms go off at roughly the same time. This can overwhelm both the monitoring station and the authorities who respond to alarms. I can foresee this technology making a huge impact on the efficiency with which alarm signals are handled moving forward, and I hope that every PSAP will adopt this new technology.

CMS began implementing this partnership with Intrado in December of 2022 with three (3) agencies in Florida. As of August 2023, they have over 130 agencies on board, and as more PSAPs sign up with Intrado, they will be folded into the integration with CMS. The current list of participating agencies can be found here.

This is just another way that the alarm industry is working to improve its service to both the alarm user and the community at large. What do you think about this new partnership? Leave a comment below and let us know your thoughts. We look forward to hearing from you!

Exciting news! Alarm.com has unveiled a new customer app with a fresh look. Faster response times and fewer clicks mean instant access to the data you need. Video and Activity are now conveniently available right from the Dashboard, ensuring quick access to your most vital information.

In addition to the changes and time savings you can see, response times have been improved at the server level as well. Now, instead of clicking the hamburger menu (≡) and then selecting an option, the most commonly used selections, like Video, Activity, and Home, are pinned right at the bottom of the screen.

When you first log in to the app after the update, you'll see a What's New screen that summarizes all the updates.

The Dashboard can be customized so that when you log in, you see exactly what you want, and nothing that you don't. In the example below, Images and Highlights have been removed from the Dashboard. Click and drag the enabled cards to rearrange the order in which they are displayed. To edit the dashboard, click the Home icon, and scroll to the bottom of the screen, then tap Edit Dashboard.

Tapping the Video icon brings you to the video screen where you can see a live view of any camera in your account. You can also see Saved clips, and if you have any cameras enrolled in Onboard Recording you can click the 24/7 option to review selected feeds.

Clicking the gear icon allows you to edit various video settings.

The Activity screen shows you a list of events in chronological order with the newest events at the top. Each day has a Highlights section that provides a brief animated recap of the day's events. Video events provide a thumbnail for quick access to review those items. Use the extensive filter options to find specific items quickly.

Clicking the More option provides you with the options you used to see when clicking the hamburger menu in the upper left.

This upgrade appears to be a significant step forward for Alarm.com. By streamlining the user experience and placing the most pertinent information front and center within the app, overall usability and efficiency are enhanced. As users, we can all appreciate any change that simplifies navigation and reduces the number of clicks needed to access desired features! I am personally excited about this update and how it will make managing our alarms and security systems even more convenient. What are your thoughts on the latest Alarm.com UX update? Feel free to share your opinions and experiences in the comments below. We look forward to hearing from you!