April 2024 Archives

What 2GIG brought to the table at ISC West this year is a lineup of new sensors for the Edge panel. These sensors use the 900 MHz frequency band for extended wireless range. They also offer encryption for secure transmission. 2GIG boasts they will have a 2km or 1.2 mile transmitting range!

The new 2GIG E+ extended range sensors are not yet available, and we don't have an ETA yet on when they will be released. In addition, 2GIG Edge panels require a firmware update to version 1.3 (3.1.3.xxx) in order to support the new lineup. When the firmware is released, we'll update our 2GIG Edge Firmware Update Page with the new information. Hopefully, the firmware will be available just before, or simultaneously with the sensors.

We don't have all the details on this new sensor lineup, but what we do know we'll share with you here:

2GIG DW10E-900 Door Window Sensor:

With a two-way transmitting range comparable to that of the DSC PowerG sensors, these E+ extended range transmitters are sure to be a hit. The DW10E-900 is the redesigned door/window sensor in the lineup. The exterior lines are rounded while the interior lines, where the magnet and sensor come together are squared. With a built-in spacer, the DW10E-900 is meant to fit in more diverse locations. Dimensions: 2.42" x 1.07" x 0.58" (6.14cm x 2.71cm x 1.47cm). Expected battery life: eight (8) years. Data Sheet.

2GIG PIR1E-900 Motion Sensor:

The 2GIG PIR1E-900 has a coverage area of 30' x 50' (9.14m x 15.24m). It has an attractive and low profile appearance and is pet-friendly for pets up to 85 lbs (38.55kg). The PIR1E-900 boasts a quad sensing element and has a 100° maximum horizontal sensing angle. Dimensions: 3.53″ x 2.35″ x 1.63″ (8.96cm x 5.96cm x 4.14cm). Expected battery life: three (3) years. Data Sheet.

2GIG GB1E-900 Glass Break Detector:

The 2GIG GB1E-900 glass break detector can pick up the sound of breaking glass within a 15' (4.57m) diameter. It offers intelligent detection of different glass types, including plate, tempered, laminated or coated. Like some other glass break sensors, it requires both the low frequency sound of someone striking glass, followed by the high frequency sound of glass shattering in order to activate, reducing false alarms. Dimensions: 4.57" x 1.57" (11.60cm x 3.98cm). Expected battery life: five (5) years. Data Sheet.

2GIG DW30E-900 Outdoor Door/Window Sensor:

The 2GIG DW30E-900 is an outdoor rated door/window transmitter. It would also make an excellent gate sensor. And with its extended range, it can protect openings that may have once been considered too far away for protection by the alarm system. It can handle extreme temperatures of -40°F - +140°F (-40°C - +60°C) and is IP56 rated, meaning it is protected against dust accumulation that would interfere with its operation, and powerful water jets. It supports an external Normally Open or Normally Closed contact and is made to easily mount to gates, garages, or poles. Dimensions: 4.6" x 2.1" x 1.5" (11.68cm x 5.33cm x 3.81cm). Expected battery life: five (5) years. Data Sheet.

2GIG SMKT-900 Smoke/Heat/Freeze Detector:

the 2GIG SMKT900 is a triple threat. It offers detection for smoke, both high heat and rate-of-rise protection, and as an added bonus, it can also be programmed to monitor for low temperature conditions. The fixed heat temperature threshold is 134°F +/-4°F (56°C +/-2.22°C). The rate-of-rise detector activates if the temperature is 104°F (40°C) and increases by 15° in one (1) minute. The low temperature threshold is 40°F (4.44°C) for a minute or more. It restores when the temperature is 45°F (7.22°C) for a minute or more. Dimensions: 4.7" x 2.3" (11.93cm x 5.84cm). Expected battery life: three (3) years. Data Sheet.

All of these new sensors work with the 2GIG Edge. 2GIG has admittedly had some issues with firmware and compatibility, but one thing I can say about the Edge is that it is rock solid from a hardware perspective. It is very solid and feels substantial in a way that some of the other all-in-one panels do not. We're excited to see how this sensor lineup affects folks choosing the 2GIG Edge. You can see a feature comparison between the 2GIG Edge and the Resideo PROA7PLUS here.

Starting on April 23, 2024 an improvement is being implemented to the arming process for the Qolsys IQ Panel 4 and IQ Pro. This change increases customer awareness of when their sensors are being bypassed during remote arming. Previously, it was often unclear when zones were being bypassed.

The behavior changes slightly, depending on which panel version the user has. For IQ Panel 4 systems below firmware 4.5.0, and for IQ Pro systems below firmware 4.3.0n, the "Force Bypass" checkbox will be hidden both on the customer app and website to signal when the Auto Bypass feature will be applied to any open sensors and trouble conditions.

For IQ4 Panels on firmware 4.5.0 or higher, and IQ Pro panels on firmware 4.3.0n or higher, when the Auto Bypass feature is enabled, the Force Bypass checkbox will be hidden on the user app and website. This is to communicate to the user that Auto Bypass is enabled in the panel. Anything that would prevent arming is already going to be bypassed.

If Auto Bypass is disabled at the panel on these versions, the Force Bypass checkbox, which has now been renamed to "Bypass all open sensors/trouble conditions" will appear and will be checked by default. If the user deselects the checkbox and there are sensor open or trouble conditions that would prevent arming, the system will fail to arm.

Be sure your Alarm.com app is on version 5.3.1 or higher. This will allow you to take full advantage of this enhancement to the Alarm.com remote arming feature. To check whether or not your system has the auto-bypass feature enabled, you can tap the gray bar at the top of the main screen, then Settings > Advanced Settings > Enter Installer or Dealer Code (1111 or 2222 by default) > Installation > Security and Arming. You can search from the top of the screen, just type in "Auto" and you should be taken directly to this setting. The "Auto Bypass" feature is enabled, by default.

ISC West is the premiere trade show in our industry. It happens in Las Vegas each spring and all the manufacturers of security products show up. Of course, we're interested in Qolsys, Alarm.com, Resideo, AlarmNet, and 2GIG, but there are many more! They'll display all their best new gadgets.

This year Alarm.com showed up to ISC West loaded for bear! They rolled out several new offerings in the form of both products and services. Many, but not all of these devices were targeting commercial applications. We'll list the big new items below:

Alarm.com

Outdoor Floodlight Camera and VizBlinder:

The Outdoor Floodlight Camera is a new product. As the name implies, it mounts outside in darker areas where an intruder may attempt to enter or gain entry to an area where they shouldn't be.

The new Outdoor Floodlight Camera features 4MP video and Two-Way voice options. It has 3,000 Lumen floodlights, allowing you to customize your lighting options. It's suitable for homes and small- to medium-sized businesses. Additionally, because it uses video analytics, the floodlight can automatically respond to threats when unwanted visitors or vehicles are detected. It can activate red and blue warning lights and also play warning sounds from a powerful siren.

VizBlinder will incorporate new hardware as part of the new feature. It allows the central station operator to fill a room with a vision obscuring white haze. This is done after the operator has accessed the available Alarm.com cameras and determined that an intruder is present. If cameras that support Two-Way audio are in use the operator will be able to engage with the intruder prior to activating VizBlinder. If I were an intruder, and the room suddenly began filling with an unknown white fog, I would skedaddle!

Remote Video Monitoring Console:

The Remote Video Monitoring Console (RVM) is a system that allows central station operators to offer "round-the-clock concierge video monitoring and proactive defense services to customers with Alarm.com Video Analytics cameras." Operators will receive immediate alerts when a vehicle or person enters an area that is restricted. Through the RVM, the operator can review the situation and, if necessary, intervene through the RVM using hardware located on the protected site. This includes using the two-way voice feature of some cameras to talk to the unexpected visitor.

Because both the cameras and the RVM Console are provided by Alarm.com, this is truly a seamless end-to-end integration. The fact that Alarm.com makes the cameras, video analytics, and the central station hardware, there is no special interface equipment required. The Remote Video Monitoring Console is what allows the central station operator to deploy VizBlinder, which we outlined in the previous section.

Sunflower Labs Autonomous Security Drone:

Alarm.com has partnered with Sunflower Labs to offer an autonomous outdoor security drone. Sensor activity on the alarm system and Video Analytics trigger the drone to deploy and investigate suspicious events. It can cover 10 acres in 90 seconds, making it perfect for larger commercial and residential properties. The drone provides "eyes in the sky" for property owners and central station operators alike, and puts intruders on notice that they're being watched. Presumably, central station operators can also deploy the drone based on information they glean through the RVM Console.

Shooter Detection Systems

Adding to their commercial offerings, Alarm.com introduces the Shooter Detection Systems (SDS) Indoor Gunshot Sensor. In the event of an active shooter situation, this system allows for a faster and more accurate response while also providing valuable information to both police and medical first responders.

The SDS sensor uses dual-authentication technology identifying both the acoustic and the infrared signature of a gunshot. It has an accuracy rating of less than 1 false alert per 5 million hours of use. Gunshot detection signals are automatically forwarded to Alarm.com and the appropriate central station is alerted within seconds. With the information provided by the system, the operator can inform the authorities exactly where the incident was reported.

Resideo

First Alert® VX5 Indoor Camera

Adding to their recently released First Alert® VX1 video doorbell and First Alert® VX3 outdoor camera Resideo introduces the new First Alert® VX5 Indoor Camera at ISC West. Like most of these products, the VX5 is not yet available, so information about it is scarce, but we know it will offer these features:

Advanced Event Detection
• Privacy Mode
• Integration with ProSeries Security Panel
• Compact, Versatile Design
• 2MP resolution and day and night vision with WDR
• Two-way audio
• Easy to Use App – TC 2.0 - for full control of the connected home or office

2GIG

E+ Extended Range Sensors

2GIG brings their new E+ Extended Range 900 MHz sensors to ISC West. This is an exciting addition to their portfolio. This product line will capitalize on the extended range capabilities of the 900 MHz wireless frequency. The E+ lineup will offer up to 1.2 Mile (2km) transmitting range. These sensors are bi-directional and fully encrypted with extended battery life as compared to regular 2GIG 345 MHz sensors. As with most products rolled out at ISC West, these are not yet available, but a data sheet for each is linked below. We will link to the products once they become available for sale.

Available sensors, so far:

• 2GIG GB1E-900 - Glassbreak Detector
• 2GIG DW10E-900 - Door/Window Sensor
• 2GIG PIR1E-900 - PIR Motion Detector
• 2GIG DW30E-900 - Outdoor Door/Window Sensor
• 2GIG SMKT-900 - Smoke Detector

Qolsys

We saved Qolsys for last because they didn't really roll anything out especially for ISC West. Qolsys finished 2023 strong with the release of their PowerG Everywhere 900 MHz automation devices and the Qolsys IQ4 NS no screen security panel.

PowerG Everywhere combines the excellent transmitting range we've come to expect from PowerG with the battery-savings and simplicity of use we get from Z-Wave. The resulting product is a battery sipping tour de force. So far, they offer the following PowerG Automation products which are compatible with the IQ Panel 4, IQ4 Hub, and IQ4 NS running firmware 4.4.0+ and the IQ Pro with firmware 4.3.0n+:

• IQ Lock-PG
• IQ Dimmer-PG
• IQ Switch-PG
• IQ Socket-PG
• IQ Smart Plug-PG
• IQ Outdoor Plug-PG

The IQ4 NS is a budget-friendly panel based on the IQ Panel 4. It's nearly identical to the IQ4 Hub, in fact, with one exception. It does not include a touchscreen interface. Instead, programming is performed using the IQ Installer App, available as a free download from the iOS and Google app stores. You can read all about the IQ4 NS and PowerG Everywhere in our blog posts here and here respectively.

Update 04/08/24 5:08 pm: According to a contact at Resideo, the available stock of IPCAM-WOC2 cameras without this issue is being held back to use as replacements for any affected units that have already been sold. Stock is limited, and once it is depleted, the camera will likely be discontinued permanently.

As an alternative, Resideo recommends the First Alert CAMWE-WO, also known as the VX3 HD Camera. This is an outdoor, 1080p camera with Wide Dynamic Range (WDR). With its intelligent event detection, the CAMWE-WO can distinguish between vehicles, animals, and people.

Original Post: If you have purchased a new Resideo IPCAM-WOC2 recently, but have not yet tried to register it, there is a good chance it will not register. A manufacturing issue has been identified, and a fix is in the works. However, you will need to warranty replace the existing camera if affected

Resideo released this notice today regarding the issue. The notice is a bit confusing. It states that because of this issue they have decided to stop selling the IPCAM-WOC2, but it also states that a resolution has been identified and that new product is available in their warehouse and that affected units can be returned for exchange or refund.

What we know currently:

• Installed, registered, and working units are not affected. There is no reason to believe they will have future issues related to this announcement.
• Units that have been purchased but not registered may have the issue. If you attempt to register an IPCAM-WOC2 and it fails, return it to the vendor you purchased it from for an exchange or refund.
• Currently, you can't purchase a new IPCAM-WOC2. Presumably, current stock of working units is being used for warranty replacement.

We've reached out to Resideo to try and get clarification on a few of our questions. When we hear back, we'll update this blog post. In the meantime, if you have purchased an IPCAM-WOC2 and you haven't tried to register it yet, it is recommended that you do so now. If you encounter an issue, contact the distributor or dealer you purchased the unit from and proceed from there.

If you are an Alarm Grid monitored customer, or you purchased an IPCAM-WOC2 from Alarm Grid recently, you can contact us regarding a warranty replacement. Send an email to support@alarmgrid.com. If the email you use to contact support is different from the email you used when ordering your product, please provide us with the ordering email. That is the easiest way for us to look up and confirm your recent order.

Resideo has confirmed that some Gmail users are not receiving Total Connect 2.0 email notifications. Their engineering group are aware of the issue and are working on a resolution. It is expected to be resolved soon. Text, push notification, and most other email domains are not affected.

We haven't been made aware of the actual issue with Gmail email addresses, but it probably has something to do with Gmail's efforts to block unwanted emails such as spam or phishing attempts. Unfortunately, when you take measures to block the unwanted, you sometimes also block the wanted.

This is an evolving issue, and Resideo have promised to update us when it is resolved. If so, we'll post that information here. Check back often!