Alarm Grid Video Recap: February 15th

Welcome to the second Alarm Grid video recap of 2021. It has been awhile since our first recap of the year, but we really hope to make this a regular thing like it was before. Technical difficulties have slowed us down, but we're going to be back in the swing of things very soon!

Only two (2) new Alarm Grid videos were uploaded in the past week, both of them on Monday, February 15th. They cover the Alarm.com ADC-T2000 Thermostat and the DSC PG9905 Temperature Sensor, respectively. Both videos featured myself as the actor. We hope to have our other video stars back as soon as possible, but it looks like you may have to settle with just me for the foreseeable future. Expect more videos coming really soon. Anyway, onto the newest Alarm Grid videos!

Setting an ADC-T2000 Back to Factory Default

I show you how to restore an Alarm.com ADC-T2000 Z-Wave Plus Thermostat to its factory default settings. All settings and configurations for the thermostat will be set to the same values as when the device was brand-new and fresh out of the package. You normally only factory default the ADC-T2000 Thermostat if you are selling it or giving it away to someone else. You may also perform a factory reset as a last-resort troubleshooting step if nothing else seems to fix an issue.

Programming DSC PG9905 to Qolsys IQ Panel 2 Plus

I show you how to program the DSC PG9905 Temperature Sensor to a Qolsys IQ Panel 2 Plus Alarm System. If your IQ Panel 2 Plus System is monitored with access to Alarm.com, then you can receive alerts for when your PG9905 Sensor is activated. However, if you set up the zone so that reports are sent out for Alarm.com alerts, then you will only be able to configure the PG9905 zone for either high temperature or low temperature alerts. The only way you can have a single PG9905 alert the system for both high and low temperatures is if you set the zone so that it does not report out to Alarm.com. Any temperature thresholds can be adjusted on the system as desired.