December 2024 Archives

As we close out 2024, our offices will be closed on Tuesday, December 31, 2024, and Wednesday, January 1, 2025. I'll be practicing writing and typing 2025 instead of 2024, how about you? Although tech support will be closed, our central station partners will be on the job, ready to respond.

The year 2024 was pretty low-key in our industry. There were a few notable things, and we'll recap those here:

January:

In January, Alarm.com announced that because of changes T-Mobile made within their network, customers who formerly received MMS notifications for video events with a thumbnail, would begin receiving SMS messages with a link instead. You can read the full post here.

February:

The big news in February was a nationwide AT&T carrier outage that affected cell phone users and alarm communicators alike. As a carrier outage, both AlarmNet and Alarm.com customers were affected. According to the FCC, AT&T implemented "a network change with an equipment configuration error" that caused the issue. You can read the original blog post here.

March:

Among other things, in March we told customers how they can request new products for Alarm Grid to offer. You can click this link to request a product. For a full rundown on the required information, check out the post.

2024 seemed to be the year of the squatter, and we discussed ways to use an alarm system, particularly one with video support, to thwart this unique threat. Check out that post.

April:

April is ISC West month. As you may know, ISC West is the largest US trade show for the security and survaillance industry. It takes place in spring each year in sunny Las Vegas. Each manufacturer comes to the show with their best new offerings. We recapped some of those offerings here.

May:

In May, I set out to educate myself, and hopefully you, about Matter, the official Internet of Things (IoT) protocol. A new version of Matter was released in May, that drew quite a bit of attention. You can read about that, and matter in general, here.

June:

In June, I attempted to educate our readers on the joys of using B-connectors, sometimes referred to as beanies or "Dolphins". Since Dolphin is a brand name, we choose to refer to them as beanies. You can read our post on using B-connectors here.

I also posted about the potential danger of the "Shutdown System" menu option in the Resideo PROA7PLUS series panels. In short, it's best not to select that option. You can read the full post here.

July:

In July, Alarm.com rolled out their "Alarm Triggered Warning Sounds" feature. This is a configuration option that causes compatible cameras to emit an audible warning sound when a burglary alarm occurs. You can read all about this feature in this post.

Another global IT outage affected customers in July. On July 19, the now infamous "Crowdstrike Outage" for Windows systems occurred. This affected not the communicators that send signals, but the servers that receive and process them. You can read about the outage and what caused it in this post.

July was a big month! Rogers announced their plans to sunset the 2G/3G networks in Canada. The sunset is coming March 31, 2025, so if you're a Canadian customer with a Rogers communicator, prepare yourself! You can read more here.

August:

In August, Alarm.com released the "Alarm Mode" feature. Meant to make responding to an alarm as quick and easy as possible, Alarm Mode groups all alarm activity together on a single card that shows up on the customer dashboard when logging into the Alarm.com app. Read the full post for details.

On August 13, Resideo/First Alert put a quality hold on all VX1 video doorbells due to a problem with battery charging. A firmware update resolved the issue and the doorbell is again available. You can read that post, with updates, here.

Alarm.com released an all-new floodlight/camera combination unit called the ADC-V729. This product fills a previously underserved niche in the market. It comes in an AC, a 24 VDC, and a PoE version. Read all about it here.

Resideo announced in August that they were transitioning all SkyBell Video Doorbell users to a new backend via a firmware update. This occurred because of changes with the underlying SkyBell platform. You can read about that update here.

September:

In September, we wrote about a mandatory firmware update for older Total Connect 2.0 cameras. Any affected camera that failed to receive this update would no longer work with Total Connect 2.0. Cameras had until October 31, 2024 to properly update cameras. Read the full post for details.

On a more personal note, Alarm Grid rolled out our new CRM (Customer Relationship Management) platform in September. It has definitely been an adjustment, and we had a bit of a backlog of support tickets at first, but we're hitting our stride with it now. You can read about that here.

On September 27, we began preparing for Hurricane Helene. Some of our employees are located in Florida, so hurricanes often affect us both personally and professionally. You can read that notice here. We also discussed the effects hurricanes have on alarm system efficacy here.

October:

Alarm.com introduced some new Apple Widgets in response to Apple retiring the Alarm.com Today widget earlier in the year. There were two available widget options and you can read about those here.

Alarm Grid announced the new Alarm.com ADC-SVR210. Since this is not a rack mounted SVR (Stream Video Recorder) it's more of a residential than a commercial offering, though it can certainly also be used in a small business. An SVR works in conjunction with Alarm.com cameras to allow a user to record video 24/7. You can read about the launch here.

November:

In November, CMS, our central station partner for US-based customers, reported an uptick in their calls being blocked. If you have an alarm, and the monitoring station's call to you is blocked, you can't verify if the alarm is false or not. That will almost always result in a dispatch of authorities, unless you have some other specific instructions on file. Read about the issue in this post.

December:

December seems to be the month when everyone jumped on the two-factor authentication (2FA) bandwagon. Alarm.com jumped too, and now all Alarm.com customers are asked to set up 2FA. Interestingly, not only does Total Connect 2.0 not require 2FA, they don't even offer it. I've emailed them for information on why, and I'm waiting for a response. Here's our blog on Alarm.com requiring 2FA.

That's 2024 in a nutshell. It may not have been a monumental year, but it was also nothing to sneeze at. I hope you've enjoyed reading along with me throughout the year, and that you enjoyed this little trip down memory lane. As I always say, stick with me and I'll get you through this troubled world!

If you need to contact either central station while we're out, the information to do so is below. Alarm Grid fully-monitored customers in the United States should contact CMS, while Canadian-based customers should contact Rapid Response.

Alarm Grid Central Station Monitored Customers in the US Contact CMS

1. Call 888-818-7728, choose Option 9 to contact the monitoring station.
2. Provide your name and address.
3. Provide your False Alarm Password. This is the password you chose when you set up monitoring. This is the word that means "Everything is OK." If you provide the wrong word or phrase, or if you provide the Duress Password (the one that means "I'm pretending everything is ok, but I really want help!" then the operator will dispatch authorities.
4. Let the operator know the reason for your call. Provide any additional helpful information and answer any questions they may have.

Alarm Grid Canadian Central Station Monitored Customers Contact Rapid Response

1. Call (800) 932-3822 and follow any prompts provided. Depending on availability, you may reach a person immediately, or you may be provided with menu prompts.
2. Provide your name and address.
3. Provide your False Alarm Password. This is the password you set up during your activation appointment. It means "Everything is OK." If you provide the wrong information, or if you provide the Duress Password, the one that means "I'm saying everything is OK, but I really want you to send help." the operator will dispatch authorities.
4. Discuss the reason for your call with the operator.

If you're attempting to make changes to your call list, zone list, or other account related information, the monitoring station can't help you with those items. You'll need to contact us when we're back in the office. The best way to do that is to email us.

Our email address is support@alarmgrid.com. If you're emailing to make account changes, please provide your False Alarm Password, or the last four (4) digits of the credit or debit card we have on file. This will speed up our response and prevent unnecessary back-and-forth emails.

We're winding down 2024 this week. Our offices will be closed on December 24th and 25th so that our hard-working team can enjoy the holidays with family and friends. We have a number of young parents on our team, and this is a special time for them. We'll be back on Thursday, December 26.

As always, our central station partners will be monitoring the systems of our full-monitoring customers, ready to respond to any reported emergency. Whether you're an Alarm Grid customer inside the United States, monitored by Criticom (CMS) or a Canadian customer, monitored by Rapid Response, rest assured your monitoring needs are in good hands.

During the holiday, if you should need to contact the monitoring station to report a false alarm or to put your system on test, follow the instructions below, depending on your location:

Central Station Monitored Customers in the US (Contact CMS)

1. Call 888-818-7728, choose Option 9 to contact the monitoring station.
2. Provide your name and address.
3. Provide your False Alarm Password. This is the password you chose when you set up monitoring. This is the word that means "Everything is OK." If you provide the wrong word or phrase, or if you provide the Duress Password (the one that means "I'm pretending everything is ok, but I really want help!" then the operator will dispatch authorities.
4. Let the operator know the reason for your call. Provide any additional helpful information and answer any questions they may have.

Canadian Central Station Monitored Customers (Contact Rapid Response)

1. Call (800) 932-3822 and follow any prompts provided. Depending on availability, you may reach a person immediately, or you may be provided with menu prompts.
2. Provide your name and address.
3. Provide your False Alarm Password. This is the password you set up during your activation appointment. It means "Everything is OK." If you provide the wrong information, or if you provide the Duress Password, the one that means "I'm saying everything is OK, but I really want you to send help." the operator will dispatch authorities.
4. Discuss the reason for your call with the operator.

If you're attempting to make changes to your call list, zone list, or other account related information, the monitoring station can't help you with those items. You'll need to contact us when we're back in the office. The best way to do that is to email us.

Our email address is support@alarmgrid.com. If you're emailing to make account changes, please provide your False Alarm Password, or if you prefer, you can provide the last four (4) digits of the debit or credit card we have on file for billing. This is our way of verifying that the request is from you. Failure to provide this information in your initial email will delay the completion of your request while we ask for the information and wait to receive it.

This year has flown by. It's hard to believe we're here, about to say hello to 2025! From all of us at Alarm Grid, we hope you have a very happy holiday. Whether you celebrate Christmas, Hanukkah, Kwanzaa, or any other holiday, we hope that you find yourself, safe, warm, and surrounded by those you love this season.

Beginning on October 8, 2024, Two-Factor Authentication (2FA) is mandatory for all new Alarm.com accounts. Existing accounts are being moved to the new standard, with 100% of accounts using 2FA by December 19, 2024. If you're an existing Alarm.com customer, you may have already been updated.

Two-Factor Authentication, also known as Multi-Factor Authentication (MFA) works like this. You log into an app or a website with your customary username and password. You're then prompted for further authentication via a text message, email, or third-party authenticator app. During the initial 2FA setup, you can choose one or more of these authentication methods.

Via the path of your choice, you'll receive a code. You'll input the code at the prompt, and then you're logged into the app or website. For Alarm.com users, you will be prompted to make the browser or device a "Trusted Device". If you say yes to this prompt, then you may not be prompted for 2FA the next time you log in using that browser or device.

To quote The Dude, there are, "a lotta ins, a lotta outs, a lotta what-have-yous" here. For instance, if you trust your browser but clear your cache later, you'll need to go through 2FA again next time. If you choose "Skip" at the prompt about trusting the browser, then you will have to go through additional authentication every time you log in until you choose to trust the browser.

This may seem like a real hassle, but let me share a story about someone who skipped enabling 2FA because they thought it was too much trouble. A friend of mine did not secure their account with a large retailer. When offered the option to set up 2FA, they always skipped it.

Their account was hacked and the hacker set up 2FA. They entered a phone number to receive verification codes. My friend was eventually able to change the password for the account with the retailer's help. But because 2FA had been set up with a phone number inaccessible to them, my friend was unable to regain full access. The fraud department for the retailer was unable or unwilling to do anything, so my friend lost years of purchase history. Had they set up 2FA to begin with, this could not have happened.

Fortunately, the scenario I described above can't happen to Alarm.com customers. If you're an Alarm Grid customer and you need help with 2FA for one of your logins, contact us. We'll verify that it's you with either your password or the last four (4) digits of the card we have on fie for billing, then we'll help you reset your 2FA credentials.

After we Reset 2FA for the login through the Alarm.com Partner Portal, the user will be prompted to set up 2FA again the next time they log in. This might be necessary because the user's phone number changed, or the phone carrier changed, or because the user no longer has access to the email used to set up 2FA to begin with. If you're not an Alarm Grid customer, contact your alarm dealer for assistance with Two-Factor Authentication.

Alarm Grid technical support is available Monday-Friday from 9:00 am to 8:00 pm EST at 888-818-7728 Option 2. If it's outside business hours you can send us an email at support@alarmgrid.com. For 2FA assistance, let us know and provide either your false alarm password, or the last four (4) digits of the credit or debit card we have on file for billing. Then, let us know which login you need help with, if your account has more than one. This will expedite our response.