Alarm Grid Video Recap: January 24Posted By Michael Goris
We're back with another weekly video recap! This time, we have four (4) new videos to show-off. All of them were uploaded right at the end of the week. Good for our video team for rallying! There are three (3) videos with Joe, and one (1) with Jarrett. Let's take a look at the videos!
Joe bows before providing a helpful overview of Alarm.com Video Analytics. This is a feature offered with most of the newer Alarm.com Security Cameras, and it is something you will definitely want to take advantage of if you use Alarm.com for video monitoring. By using Video Analytics, you can have Alarm.com alert you for suspicious activity, while ignoring routine events that don't warrant your attention. Please note that you will need to have the feature enabled by your monitoring company that provides you with Alarm.com service.
Joe explains how you cannot use a Honeywell 4219 Zone Expander with a Honeywell VISTA-50P Security System. The Honeywell VISTA-50P is a polling loop system that can support addressable V-Plex Polling Loop Sensors when a compatible polling loop zone expander is added to the system. Only compatible polling loop expanders can be added to the VISTA-50P. You cannot add a regular hardwired zone expander like the Honeywell 4219. The Honeywell 4219 is for VISTA Low P-Series Panels only. Compatible polling loop zone expanders for the VISTA-50P include the Honeywell 4208SN and the Honeywell 4208U.
Joe shows you how to use a glass break simulator to test your glass break sensors. A glass break sensor will activate upon hearing the low-pitched "thud" of an object striking against glass, along with the high-pitched "shattering" of glass breaking. By using a glass break simulator, you can properly test your glass break sensors, without having to actually break any glass. This is the best way to test your glass break sensors. The glass break simulator Joe uses in this video is the Honeywell FG701.
Scrublord Jarrett takes time out of his busy schedule to show you how to disable the siren for your Qolsys IQ Panel 2 Plus System so that it no longer activates. This will affect the system's internal sounder, as well as any external sirens you have added to the system. By disabling the siren, your Qolsys IQ Panel 2 Plus System will not make any sounds during alarm events. In order to disable the siren, you will need to know either the Installer Code or the Dealer Code for the system. These codes are 1111 and 2222 by default, respectively.