Use a DSC PG9944 PowerG Image Sensor with a Qolsys IQ Panel 2 Plus System!Posted By Michael Goris
One excellent way to expand upon a new or existing Qolsys IQ Panel 2 Plus System is with an image sensor module like the DSC PG9944. This is an outdoor PowerG Image Sensor that can pair very nicely with the Alarm.com platform and all versions of the IQ Panel 2 Plus Security System.
If you aren't familiar with image sensors, they are basically motion detection sensors with built-in still motion cameras. When your system goes into alarm, it will take multiple photographs. These photographs are then forwarded to the panel, and then ultimately to an interactive monitoring platform like Alarm.com.
For the DSC PG9944, it starts with it its reliable motion detection. The device features eight (8) internal passive infrared (PIR) sensors, with each using an advanced quad-detection configuration. This helps to ensure that the PG9944 reliably responds to movement, while ignoring potential false alarms. Operating in this manner is crucial for an image sensor device that will typically be used in an outdoor environment.
Being able to use your image sensor in an outdoor setting opens up a world of possibilities for keeping your home safe. Many users will install the PG9944 in a backyard, inside a garage, or even in a barn or shed on the property. These are all locations where you might otherwise have difficulties using standard indoor models. You can expect the PG9944 to work reliably when exposed to rain, dust, heavy sunlight, and extreme temperatures. And the device's IR night vision helps to ensure clear and concise images even during the darkest of nights.
Many Alarm Grid customers will choose to use the DSC PG9944 with the Qolsys IQ Panel 2 Plus Systems. We believe that this is a great alternative to using standard Alarm.com Security Cameras. A great aspect about image sensors is that you do not need a video-monitoring plan to use them. In fact, you can start using image sensors on an Alarm Grid Gold Level Plan (Self or Full), which is the standard level plan to start using Alarm.com. More info can be found on our monitoring page.
When the associated system goes into alarm, the PG9944 responds by taking ten (10) consecutive photos. These ten photos are sent to the IQ Panel 2 Plus for local viewing. These images can be easily viewed from the main screen of the IQ2+ by scrolling left or right until you see the other panel photos. Please note that they may be strung-together to appear as a stop-motion video. But rest assured, they are individual photos, and not a video. You can also take manual photos anytime, even if your system is not experiencing an alarm event.
It is also important to note that the Qolsys IQ Panel 2 Plus will send the first of the ten captured images to the Alarm.com platform for remote viewing. Only the first image is sent, and it will be available within the "Panel Camera Images" section of Alarm.com. Please note that this will only occur if the panel is connected with Alarm.com for monitoring and the "Panel Camera Images" feature is enabled for the Alarm.com account. That setting must be enabled by your monitoring company.
Also note that you will need to have the Panel Camera Alarm Image Uploads feature enabled on your Alarm.com account. You must enable this setting from the customer end of the Alarm.com website. Simply log-in to your Alarm.com account using a web browser, choose the Automation section, and make sure the rule is enabled. You can see an example in the image below.
We recommend using the DSC PG9944 if you require an image sensor for outdoor use. However, if you only need a unit for indoor use, then you might also consider the DSC PG9934P. This is another PowerG Image Sensor module that will offer similar performance to the DSC PG9944. But unlike the PG9944, the PG9934P can only be used indoors. This is a great device to use if you want to be able to see what's going on at home, but you don't necessarily want to pay the extra monitoring costs to use Alarm.com Video Cameras.
Both the DSC PG9944 and the DSC PG9934P are available right now from the Alarm Grid website. We recommend them for anyone looking for new image sensor modules for a Qolsys IQ Panel 2 Plus System. If you have any questions about these sensors or any of these other products on our website, please email us at email@example.com. Remember that our support hours run from 9am to 8pm ET M-F. We look forward to hearing from you!