Alarm Grid Video Recap: February 26th & 27thPosted By Michael Goris
It's time for another Alarm Grid video recap. We only have three (3) videos for the week. But the good news is that all of the videos this week feature Jorge. We hope that you find them helpful in learning how to use your security system. Let's take a look at the new videos from Alarm Grid!
Jorge explains how you can use an iPhone to control a Qolsys IQ Panel 2 Plus System. This is done using the iOS version of the Alarm.com Mobile App. You will need an alarm monitoring plan that includes access to Alarm.com. The panel will communicate with the Alarm.com Servers using an LTE cellular connection, and you can also set up an IP (internet protocol) communication path as well. By accessing the ADC App on your iPhone, you can arm/disarm, check system status, control automation devices, and more.
Jorge explains how there are two (2) hardwired zones built into the Qolsys IQ Panel 2 Plus System. These hardwired zones are for normally closed contact sensors. You can connect the sensors and then enroll them with the panel by putting the system into its auto-enrollment mode and faulting the sensors. If you want to use additional hardwired zones with an IQ Panel 2 Plus, then a wired to wireless converter is a good option. Just make sure the converter communicates at a frequency compatible with the version of the IQ Panel 2 Plus that you have (319.5 MHz, 345 MHz, or 433 MHz).
Jorge shows you how to upgrade a Honeywell LYNX Touch System to use an LTE cellular communicator. This is possible on an L5200, L5210, or L7000 LYNX Touch System. There are two (2) LTE communicators available for these systems. These are the Honeywell LTE-L57A (AT&T LTE) and the Honeywell LTE-L57V (Verizon LTE). You must make sure your LYNX Touch System is on a high enough firmware version to support one of these communicators. If you need to upgrade the firmware, you can do so using the Honeywell LYNXTOUCH-MSD Firmware Updater Tool.