New Alarm.com Smart Water Valve, Ethernet-to-WIFI Bridge, and SkyBell Digital Doorbell Adapter

Hi DIYers! We are very happy to announce that we have some exceptional new products from Alarm.com. There is a new Z-Wave Plus smart water valve, an upgraded ethernet-to-WIFI bridge for Alarm.com PoE Cameras, and a digital doorbell adapter for use with SkyBell Video Doorbell Cameras.

The first new product we will be discussing today is the Alarm.com ADC-SWV100 Smart Water Valve. This smart water valve uses Z-Wave Plus technology to communicate with your security system or Z-Wave hub. It allows you to remotely shut-off your main water line from virtually anywhere. This can be very convenient if a flood or leak occurs while you are away. The device is perfect for pairing with flood sensors that you have enrolled with your alarm panel. You can even set up smart scenes to have the device shut-off the water automatically whenever a flood sensor detects a leak.

Although the ADC-SWV100 was built with Alarm.com in mind, the versatile device can really be used with any Z-Wave controller that supports smart water valves. This includes Honeywell Alarm Systems that use the Total Connect 2.0 platform. One important thing to note is that if you use this device with Alarm.com, then you will need to have your monitoring company enable the Water Management Add-On Package for your account. If you have monitoring service with Alarm Grid, then we will do this for no additional monthly charge.

Next up we have the Alarm.com ADC-W110 Ethernet-to-WIFI Bridge. This accessory lets you take a hardwired ethernet device and have it communicate wirelessly across a local WIFI network. The device is great for use with compatible Alarm.com Cameras that use power over ethernet, also known as PoE. By using the ADC-W110, you can eliminate the need to run an ethernet cable from the IP router to the camera.

What's super convenient is that both power and IP data are supplied from the ADC-W110. You just need to connect the PoE camera with the ADC-W110 using an ethernet cable. The ADC-W110 will then take care of the rest! This device is actually a newer version of the older ADC-W100, which as of late October 2019 is still available. Keep in mind that you will still need to connect the ADC-W110 with a wall outlet for power.

Lastly, we have the Alarm.com ADC-VACC-DB-A SkyBell Digital Doorbell Adapter. This adapter makes any SkyBell Doorbell Camera with a digital doorbell chime. Normally the SkyBell devices only work with mechanical doorbell chimes. We actually created an FAQ that will help you get started using the SkyBell Digital Doorbell Adapter with your digital doorbell chime. You can check it out right here.

If you have any questions about these new products, or if you would like to learn more about our monitoring services or Alarm.com, please reach out to us! The best way to contact us is to email support@alarmgrid.com. We will review your email at our earliest convenience and reply back as soon as possible. Remember that our support hours for responding to emails are from 9am to 8pm ET M-F. We look forward to hearing from you!