Qolsys IQ Panel 2 Plus Firmware Version 2.5.2 Now Available

Posted By

We have learned that Qolsys IQ Panel 2 Firmware Version 2.5.2 is now available. Anyone with a Qolsys IQ Panel 2 or IQ Panel 2 Plus can download this update. This is a universal update that will improve system performance and connectivity with Alarm.com. Apply it as soon as possible.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

There isn't too much exciting to talk about with this update, but it is still very important. The only definitive noticeable change is that it fixes an error involving low-battery alerts while using a Qolsys IQ Hardwire 16 Wired to Wireless Converter. Other than that, the update mostly serves to improve the communication between the panel and Alarm.com.

You can read the entire Technical Service Bulletin TSB# 200413 here.

To apply this update, make sure that your panel is running at least Firmware Version 2.0.1, and have your system connected with a local WIFI network. The system should be connected with its transformer, and its backup battery should be charged. Please also note that if you are updating from Firmware Version 2.5.0 or 2.5.1, you must change the Log Level to "Verbose". This is done by clicking the small grey bar at the top of the system screen and choosing Settings > Advanced Settings > Installer Code (default 1111) > Installation > System Logs.

Once you are ready, from the primary panel, click the small grey bar at the top of the screen. Choose Settings > Advanced Settings > provide the Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.5.2 > OK > Upgrade using network. The upgrade process should then begin. It normally takes less than 30 minutes. Remember that you must enter the Patch Tag exactly, or else the process will fail.

If you have any questions about this update, please email support@alarmgrid.com. We offer free technical support for monitored customers. Our support hours run from 9am to 8pm ET M-F. We look forward to hearing from you!

Note: This new Qolsys update should not be confused with Total Connect 2.0 Update Version 2.5.2, which was released in October of 2018.

Tags: , , , , , , , , , , ,

Comments


Related Products

Qolsys IQ Panel 2 Plus Verizon LTE, DSC Compatible - 433MHz Wireless Alarm Panel w/ PowerG
Qolsys IQ Panel 2 Plus Verizon LTE, DSC Compatible
433MHz Wireless Alarm Panel w/ PowerG
Qolsys IQ Panel 2 Plus - AT&T LTE with PowerG, S-Line & Legacy Interlogix
Qolsys IQ Panel 2 Plus AT&T LTE, Interlogix/GE Compatible
319.5 MHz Wireless Alarm Panel w/ PowerG
Qolsys IQ Panel 2 Plus AT&T LTE, DSC Compatible - 433MHz Wireless Alarm Panel w/ PowerG
Qolsys IQ Panel 2 Plus AT&T LTE, DSC Compatible
433MHz Wireless Alarm Panel w/ PowerG