Qolsys IQ Panel 2 Plus Posts

Posted By

Hi DIYers! We know that it can be difficult to decide between all the available security systems on our site. Today, we're going to make that decision a little easier by presenting our list for the Top 5 Security Systems of 2019. We really have some great alarm panels to present!

Alarm grid inside security stickers

A good security system is easy to use, supports many sensors, and offers some excellent features. In 2019, competition is stiff, as alarm systems are becoming more and more user-friendly, and they are stepping up their game in terms of capabilities. Any of the 5 systems on our list would make a very nice addition to your home or business. But make sure to stick around until the end so you can see our favorite system!

With that out of the way, here are our Top 5 Security Systems for 2019:

5. Interlogix Simon XTi-5i


Interlogix may be shutting down at the end of 2019, but at least they put out a decent panel to go out on! The Interlogix Simon XTi-5i is a solid budget alarm system that offers a pleasant 5-inch touchscreen display and a customizable UI. It supports up to 80 wireless zones and a variety of Alarm.com Communicators, including dual-path options. Adding an Alarm.com Communicator will also allow you to use Z-Wave devices with the system. There are even some new Interlogix Encrypted Sensors specifically designed for the Simon XTi-5i System!

4. 2GIG GC2e

2gig gc2e wireless encrypted alarm panel

The 2GIG GC2e is a budget-friendly system that is perfect for users who are familiar with the old 2GIG Go!Control Panel. As an upgrade from the 2GIG GC2, the new GC2e includes a larger 5" touchscreen, Z-Wave Plus functionality, and support for the 2GIG eSeries Encrypted Sensors. The GC2e supports up to 60 wireless zones and 64 user codes. Note that you will need to add a compatible cellular communicator to get the system monitored and connected with Alarm.com!

3. 2GIG GC3e

2gig gc3e wireless encrypted alarm panel

The 2GIG GC3e is the flagship system from 2GIG, and it includes everything you could want in an alarm system. It features encrypted sensor support, partitioning, integrated WIFI, built-in Z-Wave Plus, and a beautiful 7-inch touchscreen display. The GC3e is very robust with its support for 100 wireless zones and 100 user codes. Just remember that a cellular communicator is needed to activate the system for monitoring and connectivity with Alarm.com. Once you add a cellular communicator, the system will be dual-path ready!

2. Honeywell Lyric Controller

Honeywell lyric controller encrypted wireless security system

The Lyric has been out for a few years now, but it is still one of our favorite security systems. It is the only panel on this list that offers compatibility with Apple HomeKit, and the only one of these systems that can be monitored through WIFI only. The panel features built-in WIFI, but you can add an optional LTE cellular communicator to make it dual-path ready. The Lyric is also the only system on this list that uses the Total Connect 2.0 platform instead of Alarm.com. Another benefit is that the Lyric has its own lineup of encrypted SiX Series Sensors. And you will love its 7" touchscreen. Other features for the system include support for up to 128 wireless zones, classic Z-Wave, 48 total user slots, a built-in 2MP camera, 10 chime settings, and so much more!

1. Qolsys IQ Panel 2 Plus

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

The Qolsys IQ Panel 2 Plus is the best security system of 2019. There is so much to love about the IQ Panel 2 Plus. It has a sleek, crisp design with a 7" touchscreen display. It is dual-path ready right out of the box with a built-in LTE communicator (AT&T or Verizon) and integrated WIFI. It offers some outstanding features, including live-streaming for compatible Alarm.com Cameras, support for four (4) partitions, automatic Bluetooth disarming, a built-in glass break sensor, a 5MP camera, and so much more. There are three (3) versions of the IQ Panel 2 Plus, with each one supporting a different legacy sensor frequency (319.5 MHz, 345 MHz, or 433 MHz). But the icing on the cake is that you can use DSC PowerG Sensors with ANY version of the IQ Panel 2 Plus. These sensors offer a wireless range of up to 2,000 feet away from the IQ Panel 2 Plus in open air, and they utilize 128-bit AES encryption for maximum wireless security. This is truly the best system on the market right now!

If you have any questions about any of these systems, or if you want to learn more about the monitoring services offered from Alarm Grid, please reach out to us! The best way to contact us is to email support@alarmgrid.com or call us at (888) 818-7728. Remember that our support hours are from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! Last week, we sent a small team to Silicon Valley, California to check out the 2019 Qolsys Summit. Needless to say, we were absolutely blown away with what Qolsys will soon be offering. Today, we would like to focus on some of their new industry-changing products in the pipeline.


The biggest highlight of the Qolsys Summit was the opportunity to check out the newest upcoming panel from the company, the Qolsys IQ Hub. The IQ Hub represents the vision of Qolsys to bring home security closer and more accessible to the average consumer than ever before. This is truly the optimal system for any budget-conscious consumer who wants to bring state-of-the-art security and technology into their home. It is slated for a Q1 2020 release.

We do not have all the details on the Qolsys IQ Hub quite yet. But there is still a lot that we can talk about. The most obvious addition to the Qolsys IQ Hub is its prominent speaker on the front. Qolsys is expected to introduce some mind-blowing integrations for the system that will turn your alarm control panel into a compact entertainment center.

Remember that Alarm.com already offers an excellent Sonos integration. We are sure that the IQ Hub will take full advantage of this feature and truly put it to great use. Our team did get a chance to test the IQ Hub sound quality, and we can confirm it sounds just as good as any high-end portable speaker. This is highly impressive, and we expect many users to be thrilled that their alarm system can now essentially double as a party-starter.


The next aspect you will likely notice about the IQ Hub is its standout display screen. This is a 7" touchscreen display that appears to have even higher resolution than any existing security system on the market. We do not have the exact specifications on the screen just yet, but it certainly passes the eyeball test. And as you can see from the photo above, the slideshow feature returns. Get ready to show-off some of your best photos on the Qolsys IQ Hub!

As we mentioned earlier, Qolsys seems to be envisioning the IQ Hub as a way to make the home security market more accessible to the average consumer. The new system is not expected to replace the existing Qolsys IQ Panel 2 Plus, but it is anticipated to have a lower price point. We also expect many existing features to return to the IQ Hub, including built-in WIFI, Bluetooth connectivity, cellular LTE, and Z-Wave Plus functionality.

One thing that will not be returning to the IQ Hub is support for legacy sensors (e.g. 319.5 MHz, 345 MHz, and 433 MHz devices). The new system will be entirely PowerG, and you will need to use those sensors with the system. This is fine, as PowerG Sensors offer an impressive wireless range of up 2,000 feet when used with the IQ Hub in open air. They also utilize military grade 128-bit AES encryption in all their communication to ensure maximum wireless security.

Another interesting note about the panel is that it is not designed to be opened up. This is a significant change from most existing security systems, where you will occasionally need to open up the panel to make hardware changes. The battery on the IQ Hub is sled-replaceable, and it can easily be swapped out by the end user with little effort. All of the hardware is built right in, so you will never have to make any changes in that regard. Talk about DIY friendly!


Qolsys made other various enhancements to the IQ Hub System. They touted an improved integrated camera, and it can even double as a motion sensor by detecting changes in pixelation. We also expect this feature to be used in conjunction with Alarm.com so that you can take a peak-in at your home while you're on the go. You will also notice the LED light on the front of the panel. This light changes colors to let you know the current system status. How cool!

The system also features a built-in microphone that you can use to get alerts regarding loud sounds. You can even adjust the minimum sound level required to trigger alerts. This is perfect for parents who want to know if their baby is fussing or for owners of rental properties who may want to be alerted if their guests are throwing a loud party. It's just another way that Qolsys is working hard to keep you connected with your home.

We do expect that there will be some hardware limitations of the IQ Hub when compared with the IQ Panel 2 Plus, especially when you consider the anticipated lower price point. Qolsys most likely reduced costs by dropping legacy sensor support. It's also possible that the IQ Hub will support fewer zones than the IQ Panel 2 Plus (128 zones). But we cannot confirm the exact number of zone on the IQ Hub at this time. The IQ Hub is also slightly larger than the existing IQ2+ due to the added speaker.

As stated earlier, the Qolsys IQ Hub is scheduled for a Q1 2020 release. This groundbreaking new system is sure to make some big waves in the security industry, and we are confident that it will help many new users get their start with home security. We can't wait for its release, and we hope you're excited too!


Qolsys also unveiled another interesting product at the event, the Qolsys IQ Router. At first glance, you might be wondering what's the big deal. What's so exciting about an IP router? Well Qolsys packed in some game-changing features that are sure to make the IQ Router the perfect addition to your IQ Hub or IQ Panel 2 Plus System. It is sure to make your life more convenient in many ways. And we can also confirm, it is dual-band with support for 2.4 GHz and 5 GHz!

At the basic level, the IQ Router is exactly what it sounds like, an internet router. It replaces the existing router for your home's IP network. But what you get with the router is pretty ingenious. Any Qolsys IQ Panel 2 System or Qolsys IQ Hub connected with the IQ Router can be accessed remotely by your alarm monitoring company for programming purposes. This is similar to what the DSC Iotega offers. But with the Qolsys Systems, it is optional rather than mandatory.

Of course, if you don't want your monitoring company accessing your panel, then you can disable the feature. But it's pretty nice if you want assistance with programming new devices. One thing you will certainly love is its ability to auto-discover your IQ Hub System and automatically enroll it with your WIFI network. You can even configure your IP settings right from the IQ Hub. This truly makes the IQ Hub the central controller for your entire network!

Another innovation from the IQ Router is the ability to auto-enroll guest WIFI devices. In other words you can get any visitors on your WIFI network, without making them enter a long, tedious password. The way this works is that your guest will request to join the network from their IP device. You will then approve the request from either your IQ Hub or an app on your phone. And just like that, your guest will be connected with your WIFI network. Super convenient!


As you will notice, the Qolsys IQ Router only has one (1) LAN port for connecting a hardwired ethernet device. This isn't a big deal, as most users might not even need one. If you need additional ports, then you can easily connect a network switch to the router and use it however you would like.

But one very exciting feature of the IQ Router is its ability to support up to eight (8) WIFI extenders or access points. This makes it truly suitable for even large commercial locations! The router facilitates a total mesh network to help ensure that all of your IP devices stay connected across even an incredibly expansive area. Whether your needs are big or small, you are sure to get great use out of the new IQ Router! Qolsys states that it should be out by the end of this year.

We would like to end this post with some smaller product announcements we heard at the Qolsys Summit. A PowerG 360-Degree Ceiling-Mount PIR Motion Sensor called the PG9862 was unveiled. This sensor is perfect for use in closets or in commercial locations where corner-mounting is not feasible. The PG9862 is available from Alarm Grid now, and you can get it right here.

Lastly, we heard rumors about a much-anticipated PowerG Wired to Wireless Converter. This is huge news, as it will allow you to takeover an existing hardwired system and use a Qolsys IQ Panel 2 Plus or Qolsys IQ Hub in its place. And of course, all your hardwired sensors will enjoy the amazing range and security of the PowerG wireless protocol. We do not have any other details on the PowerG Converter at this time, but we will definitely keep our eyes peeled.

We hope that you are eagerly awaiting all of these new products just like we are! This was truly an awesome event that Qolsys put on, and we are thankful that we got to be a part of it. We are hopeful that Qolsys hosts a similar gathering next year in 2020! For now, check out these new and upcoming products, and email us at support@alarmgrid.com if you have any questions or thoughts. Remember that our support hours are from 9am to 8pm EST M-F. As usual, we look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , ,

Comments


Posted By

One of our favorite alarm system manufacturers Qolsys has announced that they will begin manufacturing the IQ Panel 2 Plus in the United States. Thanks to a newly formed partnership with Foxconn Industrial Internet (FII), the security system will now be assembled in Mt. Pleasant, Wisconsin.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

According to Qolsys, the panel will be assembled at the FII facility in the Wisconn Valley Science and Technology Park in Mt. Pleasant, WI. Qolsys has stated that the move will help the company maintain high-quality and consistent manufacturing. It will also improve their delivery speeds and help them expand their overall global presence. The company will still continue to operate its existing facility in Juarez, Mexico. This is just another location for Qolsys to produce industry-leading products.

We believe that this is an excellent move for Qolsys, as the company will benefit greatly from the manufacturing, production, and supply chain expertise of FII. It is also great news to hear of a security system manufacturer bringing more jobs to the USA. As you may know, Qolsys is based out of San Jose, CA, and they have regularly provided some great innovations for the security industry. Their IQ Panel 2 Plus System has received widespread praise for features like PowerG support, automatic Bluetooth disarming, live-streaming for ADC Cameras, partitioning and more.

Alarm Grid congratulates Qolsys on the recent move, and we look forward to their continued success. If you have any questions about the IQ Panel 2 Plus or any Qolsys product, you can reach out to us by emailing support@alarmgrid.com. Remember that our technical support hours are from 9am to 8pm EST. We look forward to hearing from you and helping you find the perfect security system for your needs.

Tags: , , , , , , ,

Comments


Posted By

Hi DIYers! We have been talking about the IQ Panel 2 Plus a lot lately. First we revealed the new Firmware Version 2.4.0 upgrade. Then we took an in-depth look at the new firmware. Today, we're going to examine the new Control4 Integration available for the IQ2 on Firmware 2.4.0 or higher.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

By using the Control4 Integration, you can control basic security functions for your Qolsys IQ Panel 2 Plus System from your Control4 Touchscreen. This includes arming and disarming from the C4 System. In other words, your Control4 System will become somewhat of a secondary keypad for your IQ Panel 2 Plus System. Meanwhile, you can still use your IQ2 as a primary Z-Wave Controller and have full functionality with Alarm.com. How cool!

The C4 Integration will work with any Qolsys IQ Panel 2 or IQ Panel 2 Plus that is running Firmware Version 2.4.0 or higher. To get started, you will want to download the Qolsys IQ Panel 2 Driver to your Control4 System running OS Version 2.6.0 or higher. The driver can be found within the C4 Driver Database. From there, make sure your IQ Panel 2 and your Control4 System are on the same WIFI network.

Next, turn your attention to your IQ Panel 2 System. From the main screen, click the small grey bar at the top. Choose Settings > Advanced Settings > enter Installer Code (default 1111) > Installation > Devices > WIFI Devices > 3rd Party Connections > enable Remote Device Access > OK. The panel will then reboot to apply the changes. Return back to the 3rd Party Connections Menu, and click on "Reveal Secure Token". Then apply the token at your C4 System to pair.

As this integration is still very new, it is somewhat limited at the moment. Right now, we can only confirm that the integration allows for system arming/disarming from the C4 Panel. It's possible that new features and functions may be released in due time. Still, this is quite a nice integration for anyone with an IQ Panel 2 and a C4 Home Automation setup.

If you have any questions about this integration, please reach out to us. We offer free online and phone support for Alarm Grid monitored customers. The best way to reach us is by emailing support@alarmgrid.com. We will check your email as soon as we can and reply back promptly. If you prefer to call us, you can reach us at (888) 818-7728 during our usual business hours of 9am to 8pm EST M-F. We look forward to helping you with the new Qolsys Control4 Integration!

Tags: , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We made a post last week that briefly discussed Firmware Version 2.4.0 for the Qolsys IQ Panel 2 and IQ Panel 2 Plus. We want to take a closer look at some of the great new features offered from this latest firmware update. Now is certainly a great time to get an IQ Panel 2 Plus!

Qolsys iq panel 2 verizon 7 security panel w slash z wave ready

Panel Scene Control

New with Firmware Version 2.4.0 is the ability to activate Alarm.com Smart Scenes directly from the IQ Panel 2. Previously, this could only be done from the Alarm.com website or mobile app. This is much more convenient than having to control each Z-Wave device and the system individually. You can also control scenes from the IQ Remote Keypad if you have one.

To get started, you will first need to have at least one smart scene created on your Alarm.com account. Remember, you can create smart scenes from the Alarm.com website or mobile app. When making the scene, make sure to include all of the relevant devices. This can include Z-Wave devices programmed with the system, as well as the system itself.

You must also enable the feature for the panel. This can be done at the panel itself. Start from the main screen of the panel, and click the small grey bar at the top. Choose Settings > Advanced Settings > enter Installer Code (default 1111) > Installation > Installer Settings > Check the box next to Scenes Support (you'll need to scroll down). Then return to the main screen by clicking the home button at the bottom.


You will now be able to run Alarm.com Smart Scenes from the panel itself. From the main screen, click the Scene Control button in the bottom-left corner:


Then choose the scene you want to run. We made a scene called "Test Scene", which locks a Z-Wave Lock, sets our Z-Wave Thermostat to 70 degrees Fahrenheit, and sets the system to Arm Stay. We can confirm that the new panel scene feature works perfectly!


IQ Remote Camera Streaming

One new feature we are sure that many users are sure to be excited about is the ability to live-stream Alarm.com Cameras from the IQ Remote Touchscreen Keypad. We have previously discussed the ability to live-stream compatible ADC Cameras from the panel itself. But now you can do it from the IQ Remote. This is great for anyone with a surveillance camera setup who uses the IQ Remote as a secondary keypad for the system.

The same restrictions for streaming from an IQ Panel 2 apply when streaming from an IQ Remote. This means that only Alarm.com Cameras that support the panel streaming feature can be streamed from the IQ Remote. Additionally, it is only possible to stream video from the IQ Remote. You cannot stream audio like you can on the IQ Panel 2. For more information on setting up the camera streaming feature, please review this helpful FAQ. You must have the main panel streaming feature enabled to be able to stream from the IQ Remote.

You also have to enable panel streaming for the IQ Remote. You can do this from the main panel. Start from the main screen of the system. Click the small grey bar at the top. Choose Settings > Advanced Settings > enter Installer Code (default 1111) > Installation > Installer Settings > Check the box next to Stream Live Video Cameras to IQ Remote. Then return to the home screen by pressing the picture of the house at the bottom.


You will then be able to access the same menu option from the IQ Remote that you use on the main panel to stream video. Just swipe left or right on the IQ Remote home screen until you reach the option to choose a camera. You will have to excuse our desk clutter, but the image looks just as good on the IQ Remote as it does on the IQ Panel 2. Quite awesome!


Wellness & Check In/Out Screens

This feature is pretty unique. You can have the main screen of the IQ Panel 2 serve as an Auxiliary Panic button for triggering a medical alarm. This also allows you to set up a Check In/Out function for the system. This is great for anyone with a business who may want to monitor when employees come and go. The panel will take a picture whenever a user checks in or out. You can also get text and/or email alerts regarding this activity from Alarm.com. It really goes to show that Qolsys is working hard to make the IQ Panel 2 Plus the premier security system for small businesses!

There are a few things to keep in mind when using this feature. First is that Check-In & Check-Out can only be enabled if the Wellness Page is enabled. Second, enabling Check-In & Check-Out feature will also enable Settings Photos from the panel camera. This is so that a picture can be taken when a user checks in or out. Finally, you cannot enable the Wellness Page if Partitions are enabled for the system.

Again, the feature must be enabled from the Installer Settings Menu. From the main screen of the system, press the small grey bar at the top. Choose Settings > Advanced Settings > enter Installer Code (default 1111) > Installation > Installer Settings > Check the box by Wellness Page > Check the box by Check-In / Check-Out. You can then return to the home screen by clicking the picture of the house at the bottom.


When you return to the main screen, you will notice that you are at the Wellness Menu. This is where you can trigger an Auxiliary Medical Panic on the system. To get to the usual Arming/Disarming screen, just swipe left once.


Any Questions?

If you have any questions about Firmware Version 2.4.0 for the IQ Panel 2 Plus, please do not hesitate to reach out to us! Remember that we offer free online and phone support for our monitored customers. The best way to reach us is to email support@alarmgrid.com. We will check your email as soon as possible and reply back at our earliest convenience. You may also call us at (888) 818-7728 during our normal business hours of 9am to 8pm EST. We look forward to hearing from you and telling you all about the IQ Panel 2 Plus System!

Tags: , , , , , , , ,

Comments


Posted By

Hi DIYers! We are excited to learn that Firmware Version 2.4.0 is now available for the Qolsys IQ Panel 2 and IQ Panel 2 Plus. The update can easily be applied at the panel or pushed from Alarm.com. Many new features and automation capabilities come included with the firmware update.

Qolsys iq panel 2 verizon 7 security panel w slash z wave ready

The following updates to the system are applied with Firmware Version 2.4.0:

Improved User Interface (UI)
- Ability to Hide Security, Lock, and Thermostat Pages
- Dynamic Screen Lock Page - Enable Independently from Partitions
- All-New Automation & Wellness Pages

Improved Partitions 2.0
- Global Arming
- Bluetooth Disarming by Partition

LiftMaster MyQ Garage Control
- New Panel UI for LiftMaster Garage Door Devices Paired w/ Alarm.com

ADC Scene Control
- Control Alarm.com Scenes Directly from Panel

IQ Remote Enhancements
- Alarm.com Videos thru Built-In Camera
- Live-Stream ADC Cameras and Video Doorbell thru IQ Remote (No Audio)
- Connectivity Improvements

Home Automation
- Support for Z-Wave Version 6.81.03 - Including S2 Security & SmartStart
- Note: Only for Panels Manufactured w/ 2.4.0 & Above; Not for Panels Receiving Update OTA
- Support for LQI 2 (link quality indicators)
- Emergency Heat Mode for Z-Wave Thermostats now supported

PowerG
- PowerG Modem Firmware Update 80.25
- Fixes Compatibility with the DSC PG9312 Outdoor Contact

Panel Motion
- Sensitivity Settings - High, Medium, Low
- Mask-Off Up to Four (4) Distinct Areas

Other
- QR Code Scanning for S-Line Sensor Enrollment (319.5 MHz Panel Only)
- Language Improvements

While we will certainly be showing off these features in greater detail sometime in the near future, for now we just want to show you how to download the new firmware. You can have the update pushed down automatically from the Alarm.com servers free of charge. Alarm Grid customers can do this by emailing us at support@alarmgrid.com. You will need to have the panel monitored with Alarm Grid and connected to WIFI for us to do this.

But the easiest way to update is to apply the update yourself at the panel. Again, make sure your system is monitored and connected to WIFI before you begin. It will also need to be plugged-in and not have a low-battery condition. Start from the main screen of the system. Click on the small grey bar at the top. Choose Settings > Advanced Settings > Installer Code (default 1111) > Upgrade Software > Patch Tag > type in iqpanel2.4.0 > OK > Upgrade Using Network. If done correctly, the new firmware update should be downloaded. Once it has been completely downloaded, press "OK" to begin the update process. The panel will reboot as part of the update. The entire process will take around five (5) minutes and is complete after the reboot.

If you have any questions about this update, please email us at support@alarmgrid.com. This looks to be a very exciting update for the IQ Panel 2 plus, and we can't wait for you to check it out. We will be showing off some of these features in greater detail in the coming days. Keep checking our blog for more information!

Tags: , , , , , , , , ,

Comments


Posted By

Hi DIYers! We are happy to announce that there are new firmware updates available for the Qolsys IQ Panel 2 Plus and the 2GIG GC3e & GC3 Systems. Qolsys users can apply the firmware update locally at the panel. 2GIG users can apply from USB or have it pushed from Alarm.com for a small fee.

Qolsys iq panel 2 at and t wireless security system with at and

2gig gc3 diy wireless security system w slash 7 screen

Qolsys IQ Panel 2 Plus Version 2.3.4

Starting with the Qolsys IQ Panel 2 Plus, Firmware Update 2.3.4 is now available. This is a relatively minor upgrade to the system that improves recognition of the PowerG daughterboard for supporting wireless PowerG Sensors. Although you can technically apply this update to an original Qolsys IQ Panel 2 System, it won't make a difference, because that system does not have a PowerG daughtercard. Since you can apply this update locally at the panel, there is no fee required to receive this update. Remember, your system must be actively monitored and connected with Alarm.com for the update to go through.

In order to apply this update, you must have your Qolsys IQ Panel 2 Plus connected to WIFI. The panel should be plugged into AC power, and it should not have a low-battery condition. To begin, start from the main screen of the system. Press the small grey bar at the top of the screen. Choose Settings > Advanced Settings> Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.3.4 > OK > Upgrade Using Network. The system should begin downloading the update. Once the download is complete, the update will be applied. This process should take about five (5) minutes. The panel will reboot at this time. The process is complete after the reboot finishes.


2GIG GC3e & GC3 Firmware Version 3.2.3

The 2GIG GC3e System just became available very recently. This Firmware Update Version 3.2.3 is a great way to get your new GC3e System up and running. Additionally, existing users of the original 2GIG GC3 System can also apply this same update. The update provides support for the new AT&T LTE Communicator (coming soon!) and allows for 6-digit user codes with both the panel and compatible Z-Wave locks. It also provides various fixes and helps the system run smoother overall. It is recommended that every GC3e and GC3 user receives this update so that they can continue to get the most out of their system.

The easiest way to receive Firmware Version 3.2.3 is to simply have it pushed down from Alarm.com. To do this, the system must have an Alarm.com Cellular Communicator installed and activated. You must contact your alarm company and ask them to push the update. There will be a small fee for this service. If you don't have Alarm.com, you can get more information on our monitoring page. The latest update can also be applied directly at the panel. To do this, you must download the update file onto a USB flash drive and insert the drive into the panel. You will then be able to apply the update locally at no cost. More information on this process can be found in this helpful FAQ. Although that FAQ is specific to the original 2GIG GC3 System, the 2GIG GC3e will follow the same process. Remember, there is no cost required to update via USB.


Alarm grid inside security stickers

If you have questions about either of these firmware updates, or if you would like to learn more about our monitoring services, please reach out to us! The best way to contact us is always to email support@alarmgrid.com. We will check your email at our earliest convenience and reply back as soon as possible. You may also call us at (888) 818-7728 during our normal business hours of 9am to 8pm EST M-F. We look forward to hearing from you and answering your questions!

Tags: , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We have learned that there is a radio firmware update for the PowerG Daughtercard used with the Qolsys IQ Panel 2 Plus Systems. The new radio firmware is v80.25, and it provides various fixes for sensor compatibilities. The update can be applied by entering a patch tag.

Qolsys iq panel 2 at and t wireless security system with at and

The new radio firmware for the Qolsys IQ Panel 2 Plus PowerG Daughtercard provides some general fixes for using the system with PowerG Sensors. According to Qolsys, radio firmware version 80.25 fixes a transmission delay that occurs when PowerG Sensors are enrolled on IQ Panel 2 Plus Zones 1, 2, and 3. It also corrects the PowerG compatibility issues that many users experienced when trying to use the PowerG PG9914 Wireless Motion Sensor and the PowerG PG9933 Wireless Carbon Monoxide Sensor on radio firmware version 80.17.

There are two ways for Alarm Grid monitored customers to apply this firmware update. The first is to contact us to have the firmware update pushed down automatically from Alarm.com. This will require a small added fee, which will be applied to the customer's next bill. If you want to update the radio firmware for free, you can perform it manually by completing the following steps:

  1. Click the small grey bat at the top of the main screen.
  2. Press Settings.
  3. Press Advanced Settings.
  4. Enter Installer Code (default 1111).
  5. Press Upgrade Software.
  6. Press Patch Tag.
  7. Enter v3cardfix1 and press OK.
  8. Press Upgrade Using Network.

Please note that the panel must be connected to WIFI for the update to go through. It may take several minutes for the panel to reboot and the update to be applied. After the process is complete. the panel will begin the re-sync process with all of the PowerG Sensors. You may notice reports of PowerG Sensors opening and closing during this time. This is normal. It may take up to 20 minutes for the re-sync process to complete. Your PowerG Zones should be operating like normal after this process.

Please note that only IQ Panel 2 Plus Systems with a PowerG radio firmware of 80.XX are affected by this upgrade. If you have a PowerG radio firmware of 4.XX, you will notice that the radio firmware does not change to 80.25. The update will still go through, but no noticeable changes will be made. Again, this is normal. If you want to check your firmware, complete the following steps:

  1. Click the small grey bat at the top of the main screen.
  2. Press Settings.
  3. Press Advanced Settings.
  4. Enter Installer Code (default 1111).
  5. Press About.
  6. Press PowerG.
  7. Locate the Radio Firmware Version.

Below is an example of a Qolsys IQ Panel 2 Plus with radio firmware version 4.06:


If you have any questions about this radio firmware update, please email us at support@alarmgrid.com, or call us at (888) 818-7728. Keep in mind that our office hours are 9am to 8pm EST M-F. We look forward to hearing from you.

Tags: , , , , , , , , ,

Comments


Posted By

Hi DIYers! We would like to recognize our friends at Qolsys for their success at ESX 2019 in Indianapolis, IN. The IQ Panel 2 Plus System won "Best in Show" in the TechVision Challenge. The system also won an Innovation Award in the Intrusion Systems category. Congratulations Qolsys!

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

The ESX Innovation Awards are designed to recognize innovation and excellence in the security industry. The awards are held annually at the Electronic Security Expo (ESX) in Indianapolis, IN. Judges select 25 winners of "Innovation Awards" in various categories. Of these 25 winners, a select few are invited in the prestigious "TechVision Challenge". A representative presents the product to a panel of judges and explains how it pushes the industry forward. The judges select a single "Best in Show" winner based on the presentations.

The IQ Panel 2 Plus System started the event by winning an Innovation Award in the category of Intrusion Systems. From there, the system was invited to participate in the TechVision Challenge. Thanks to their excellent presentation and the phenomenal features of the IQ Panel 2 Plus, Qolsys managed to take home the top prize of "Best in Show". This is the 2nd time Qolsys won these awards. The original IQ Panel 2 System also won "Best in Show" in the TechVision Challenge in 2016. This continued success demonstrates the abilities of Qolsys and the fantastic security systems they put out.

It's easy to see what separates the IQ Panel 2 Plus from the rest of the pack. The system supports 128 wireless zones and includes a built-in LTE cellular communicator (AT&T or Verizon) for connecting with Alarm.com. An integrated WIFI card allows for dual-path connectivity right out of the box. There is also a Z-Wave Plus (500 Series) controller for establishing a convenient and effective smart home network.

Other features include automatic Bluetooth disarming, the ability to livestream compatible Alarm.com Cameras, partitioning and facial recognition. End users also appreciate its sleek, modern design and its beautiful 7-inch display screen that makes it a joy to use everyday. Each IQ Panel 2 Plus supports PowerG Sensors and one legacy frequency. The 319.5 MHz version comes standard, but users can alternatively choose 345 MHz or 433 MHz.

The IQ Panel 2 Plus is available for purchase right now from the Alarm Grid website. It is great for pairing with Alarm Grid's monitoring service. You will need a Gold Plan or higher to activate the cellular communicator and get the system connected with Alarm.com. If you have any questions about the IQ Panel 2 Plus or about our monitoring service, please reach out to us at support@alarmgrid.com. We look forward to hearing from you!

Tags: , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We would like to inform you that Software Update 2.3.3 is now available for the Qolsys IQ Panel 2 Plus and original IQ Panel 2. This update does not add any new features, but it does include some useful system improvements and general fixes. The update can be easily applied.

Qolsys iq panel 2 at and t wireless security system with at and

Software Update 2.3.3 really only applies useful improvements for the IQ Panel 2 Plus. However, original IQ Panel 2 owners can still perform the update to get their systems on the latest version. This update is very important for helping our technicians provide the best possible support for IQ Panel 2 Plus owners.

The following general improvements are included in Software Update 2.3.3:

  • Can now obtain the Long Sensor ID for the PowerG board and report it to Alarm.com
  • Can now obtain the Device Firmware Version for any auto-learned PowerG Sensor enrolled after updating to 2.3.3 and report it to Alarm.com.
  • Can now send Alarm.com the Radio Firmware Version and Modem Firmware Version for the PowerG board.

To perform the update, your system must be running at least 2.0.1, be connected to a local WIFI network, have its power transformer plugged-in, and have a charged battery. Once you have met the requirements, start from the main system screen. Press the small grey bar at the top. Choose Settings > Advanced Settings > enter the Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.3.3 > OK > Upgrade Using Network > OK.

It will take about five (5) minutes for the update to download. The panel should reboot to the home screen when complete. If you have any questions about this update, do not hesitate to email us at support@alarmgrid.com, or call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F.

Tags: , , , , , , , , , , , , , , , ,

Comments