Qolsys IQ Panel 2 Plus Software Update 2.3.3Posted By Michael Goris
Hi DIYers! We would like to inform you that Software Update 2.3.3 is now available for the Qolsys IQ Panel 2 Plus and original IQ Panel 2. This update does not add any new features, but it does include some useful system improvements and general fixes. The update can be easily applied.
Software Update 2.3.3 really only applies useful improvements for the IQ Panel 2 Plus. However, original IQ Panel 2 owners can still perform the update to get their systems on the latest version. This update is very important for helping our technicians provide the best possible support for IQ Panel 2 Plus owners.
The following general improvements are included in Software Update 2.3.3:
- Can now obtain the Long Sensor ID for the PowerG board and report it to Alarm.com
- Can now obtain the Device Firmware Version for any auto-learned PowerG Sensor enrolled after updating to 2.3.3 and report it to Alarm.com.
- Can now send Alarm.com the Radio Firmware Version and Modem Firmware Version for the PowerG board.
To perform the update, your system must be running at least 2.0.1, be connected to a local WIFI network, have its power transformer plugged-in, and have a charged battery. Once you have met the requirements, start from the main system screen. Press the small grey bar at the top. Choose Settings > Advanced Settings > enter the Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.3.3 > OK > Upgrade Using Network > OK.
It will take about five (5) minutes for the update to download. The panel should reboot to the home screen when complete. If you have any questions about this update, do not hesitate to email us at firstname.lastname@example.org, or call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F.