Qolsys IQ Panel 2 Plus 319.5 MHz AT&T-LTE 10-1 System Kit Posts

Posted By

If you read our blog regularly, you know that certain Qolsys IQ Panel 2 systems that use the AT&T LTE 4G network require an update to the communicator. Without this update, these cellular units will stop communicating after the 3G Sunset. On January 10, these updates will begin automatically.

Qolsys IQ Panel 2 panels that use an AT&T LTE Cellular Communicator will need a firmware update prior to the AT&T 3G sunset, which is scheduled to occur on 02/22/22. Without this update, these panels will lose their connection to the cellular network and could leave the alarm system with no communication path. The update can be performed over WIFI, or by using an SD Card.

For those panels that have a WIFI connection, Alarm.com will begin to automatically push the update on Monday, January 10, 2022. Once these updates begin, they will continue from 8 am - 8 pm seven (7) days per week until all are completed. Some panels will require both a panel firmware update and the cellular communicator update. The Alarm.com server will determine the panels that fall into this category and will perform the updates in the correct order automatically. Once the update has been applied, the panel will reboot as part of the update process. This is normal.

If a WIFI signal is available in the location where the panel is installed, but the panel is not currently connected to it, there are a few different ways to get the panel connected:

  1. Locally: The connection can be made at the panel using the touchscreen. Instructions for connecting to WIFI locally can be found here.
  2. By the dealer, remotely: Alarm.com dealers, like Alarm Grid, can use the Partner Portal to connect the panel to WIFI. This is found on the Partner Portal website under the Signaling/Broadband Settings.
  3. By the end-user, remotely: Starting on 12/13/21, Alarm.com has enabled a tool that allows an end-user to connect the panel to WIFI through the Customer Alarm.com App or Alarm.com Website.

If you would like to go ahead and perform the update on your own, and you need to connect the system to WIFI first, from the customer's Alarm.com app click on Menu > Manage Devices > Select the 3-dots icon next to the panel's name > Select Device Settings > Select Panel WIFI. From there you can either choose an existing camera to copy that device's WIFI settings or select the SSID and complete the authentication process by entering the proper password. Once the connection to WIFI is made, the communication path will be changed from Cell-only to Dual-Path.

Panels that are on version 2.3.0 or lower must be updated to a minimum of 2.3.1 or higher before applying the communicator firmware patch. Panel firmware updates on panels that have a WIFI connection can be performed locally from the panel with a Patch Tag or can be completed remotely by the alarm dealer via Alarm.com's Partner Portal. Once the panel's firmware is on a compatible version (see the link in the paragraph below) the cellular firmware can be installed using the patch tag: ATT3GSunset

For panels that have no WIFI connection available, the Qolsys IQ Panel 2 can be updated locally using a MicroSD Card. The upgrade files, as well as instructions on how to perform the local upgrade, are available on Alarm Grid's Qolsys IQ Panel 2 Plus Firmware Update page. Both the panel firmware files and the ATT3GSunset patch can be downloaded from there.

This issue only affects AT&T LTE Cellular units. Verizon cellular units are in no way affected. This update is required because early Qolsys AT&T units used a provisional VoLTE Firmware Version. This later changed when VoLTE was fully released and because the difference between the two firmware versions didn't affect a panel's ability to send signals via cellular, no action was required at that time. AT&T realized that the upcoming sunset would have a detrimental affect on these early communicators and alerted Qolsys and Alarm.com of the required update.

If you are unsure whether your panel requires the update or not, contact your alarm dealer. They can verify whether or not your panel requires the panel update as well as the cellular update. This version information is only available when checked through the Partner Portal Website, and is not available from the Alarm.com Customer App or Website. You can read the full Qolsys Technical Service Bulletin regarding this upgrade here.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Qolsys TSB #211022 indicates that the Qolsys IQ Panel 2 Plus, PowerG and 319.5 MHz version with any communicator has been discontinued. All kits containing these versions have also been discontinued. The IQ Panel 4 PowerG and 319.5 MHz panel is the appropriate replacement in this instance.

Currently Alarm Grid offers the Qolsys IQ Panel 4 Verizon LTE, Interlogix/GE Compatible 319.5 MHz Wireless Alarm Panel w/ PowerG, and the Qolsys IQ Panel 4 AT&T LTE, Interlogix/GE Compatible 319.5 MHz Wireless Alarm Panel w/ PowerG. Both versions will eventually be offered in Black or White color variations, but at this time only the White variation is available.

This announcement is only for the Interlogix/GE compatible panels that support legacy RF in the 319.5 MHz frequency. The other variations of the IQ Panel 2 Plus, those that support 345 MHz Honeywell and 2GIG legacy RF, and 433 MHz DSC legacy RF sensors are still available at this time. This is because production for the IQ Panel 4 versions of these panels has not yet begun.

Per Qolsys, the IQ Panel 4 PowerG and Honeywell/2GIG compatible panels that support 345 MHz legacy RF sensors are beginning production this week. As supply ramps up, the Qolsys IQ Panel 2 Plus that supports this legacy RF frequency will be phased out. We expect this to begin happening in the near future. Production of the IQ Panel 4 for the DSC compatible panels that support 433 MHz legacy RF sensors will begin production in early December, with a similar phase out of those IQ Panel 2 Plus models soon to follow.

As with the IQ Panel 2 Plus, each Qolsys IQ Panel 4 will support PowerG in addition to one (1) legacy RF frequency. In addition to choosing a panel based on the RF frequency to be used, the user will also want to choose the panel with the built-in cellular communicator that will have the best signal strength and quality in the location where the panel will be installed. This can match the carrier for the user's cell phone, but that is not a requirement. When deciding which cellular carrier to choose, base the decision solely on cellular coverage. Billing for the panel's cellular communicator will be included in the monthly monitoring service charges.

The legacy RF frequency built-in to the IQ Panel 4 is intended to make it easy to replace an existing alarm panel from a different manufacturer. By choosing the IQ Panel 4 that supports the wireless frequency for sensors that are already installed in a location, a user can save a lot of money by not having to buy all new sensors. You get the benefit of an all new, feature-rich alarm panel without the expense, not to mention the time and trouble saved, of replacing existing sensors that still work.

Were you thinking of purchasing a Qolsys IQ Panel 2 Plus in the 319.5 MHz "flavor"? If you were, you can purchase the IQ Panel 4 instead. This panel currently has the exact same User Interface (UI) as the IQ Panel 2 Plus, so the user experience will not differ. We expect the IQ Panel 4 to get a facelift in the near future, with the end-user having the choice of whether they want to use the new interface, or stick with the legacy one. The new UI is supposed to be very similar to the Alarm.com layout. If you have any comments, please leave them below. As always, we look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Qolsys has released the long-awaited Firmware Version 2.6.0. This will be the base version for the Qolsys IQ Hub and will allow users to configure the new IQ WIFI Mesh Router from the touchscreen of the IQ Panel 2. These are only a couple of the new features. This is truly an exciting update!

We've been talking about the Qolsys IQ Hub, well, forever, it seems. But honestly, it's been "coming soon" for over a year now. We are so glad that the wait is almost over. The Qolsys IQ Hub will truly be a DIY dream. Qolsys has taken a "see no green" approach to this panel, meaning there is no reason to open the panel fully, so you should never see the green printed circuit board (PCB). It won't even have screw terminals! The battery will be easily end-user replaceable with a minimum of "deconstruction" to the alarm panel itself. Some of the best features of the IQ Panel 2/2+ will be available in this new panel, such as Bluetooth disarming, and Alarm.com Camera Streaming at the panel.

A couple of things have been removed though. It will not have a built-in camera, nor will it offer 2-way voice capability. The IQ Hub is meant to be a slightly less expensive alternative to the IQ Panel 2 or 2 Plus, and to the Qolsys IQ Panel 4 that we should be seeing later this year. Initially, the IQ Hub will support PowerG Wireless Sensors, but later, there will be 319.5 MHz, 345 MHz, and 433 MHz options available. Each IQ Hub is intended to support only one (1) RF frequency.

You might be saying, "I thought this was a blog about Firmware Version 2.6.0?" Well, it is. But the fact that we have Firmware Version 2.6.0 available now means that the full release of the Qolsys IQ Hub won't be far behind. The Qolsys IQ Hub is scheduled for a Q2 2021 release. Aside from all the new features and improvements for the IQ Panel 2 Plus itself, another exciting capability that is added in this firmware release is the ability to control and configure the new Qolsys IQ Router through the IQ Panel 2 or 2 Plus Touchscreen.

The Qolsys IQ Router is also slated for release in Q2 of 2021. This is a mesh router system that will support up to eight (8) nodes, and both 2.4 GHz and 5 GHz networks. What's great about this product is that it allows a user to create a WIFI subnet inside their regular network. Any devices that use WIFI can be attached to the network, not just security devices, and multiple nodes (up to 8) can be added to strengthen the mesh network. If you change internet providers or even just internet equipment, you simply unplug the IQ Router from the existing router, plug it into the new router, and all of the WIFI devices will remain connected to the WIFI sub-network without having to reconfigure any of them. These are two upcoming products associated with the release of Firmware Version 2.6.0 that we're really looking forward to.

Below you'll find some of the additional new features supported on Firmware Version 2.6.0:

New Features:

  • Support for DSC hardwire keypads (HS2LCD, HS2ICN) via the CORBUS on the PowerG Hardwire to Wireless Translator (PG9WLSHW8) with Firmware V 1.1. Also added new PGM system triggers for Police, Fire, Aux & CO emergency.
  • Support for DSC NEO Wire-Free Keypads HS2LCDWFx, HS2LCDWFxENG.
  • Support for new V4 PowerG Daughter Card.
  • Panel now supports remote Z-Wave Smart Start integration from Alarm.com.
  • This update includes the critical firmware2 fix that resolves an issue where certain panels would automatically reboot with previous firmware applied.

Fixes & Improvements

  • Added a setting to allow the panel to send 1 or 10 images taken by PowerG Image Sensor Cameras (PG9934P, PG9944, NEXT CAM, PG2, NEXT CAM K9-85 PG2, BW-IRC, BW-IPC, TOWER CAM PG2, BW-ODC) during an alarm event to Alarm.com. Previously, ten (10) images were stored locally at the panel, but only the first image was sent to Alarm.com.
  • Added a setting allowing alarm dealers to select a specific time for Communication Tests to be sent to the monitoring station. If no selection is made, the time will be randomized.
  • Added a setting for detection direction on PG9902 Outdoor Curtain PIR. Users can choose left to right, right to left, or both.
  • Added the ability to disable PowerG activation LED on devices that have one in order to conserve battery.
  • Added Partition support for EN Grade 2 Panels.
  • Improved 700-Series Z-Wave performance on UK & EU Panels.
  • Bluetooth Disarm now available for UK & EU Panels.
  • Added language support for Spanish (Spain), French (France), Finnish, and Polish.
  • Added support for European date format: DD.MM.YYYY.
  • Improved cellular strength matching between Panel and Alarm.com for Latin America.
  • Silent and Audible Panics now report separate CID codes to central station.
  • Duress Alarm and Silent Police Panic can now be dismissed from Alarm.com.
  • Improvements to PowerG Wireless keypad functionality (WS9LCDWFx).
  • Keyfob arming now follows the Auto-Bypass setting on the panel.
  • Duress codes from KP-140 & KP-141 now transmit to Alarm.com.
  • Corrected an issue where a PG9905 Temperature Sensor would send double alarms for the same event.
  • Fixed an issue related to virtual device integration on the panel, which includes Liftmaster Garage Door control from the panel UI, and Solar Integration from Alarm.com. See TSB 201026 for additional details.

Into each life, a little rain must fall. It's not all good news, although, this is more of an inconvenience than actual bad news. Because Firmware Version 2.6.0 also contains the important firmware2 fix, it must be downloaded and installed from the Qolsys Server. The server has some logic built-in that allows it to tell if the panel being updated requires the firmware2 fix, or not. For this reason, much like Firmware version 2.5.5, Qolsys is not making this firmware file available for download. This means that Alarm Grid can't host it on our site.

What this means for the end-user is that in order to get 2.6.0, your panel must have a WIFI connection. Once it does, you have two ways in which you can get the firmware. You can request it from your alarm dealer, and they can push the update to your panel from Alarm.com. This will be a free update. As long as your panel has WIFI 24/7, this is a simple and no-fuss way to get your panel updated. Just remember, if for some reason your panel loses WIFI, the update won't go through. Alarm.com will not allow the panel to be updated via a cellular-only connection. You can also follow the instructions below to request the update via Patch Tag.

If your panel happens to be in an area where there is no WIFI, maybe it's a hunting or fishing cabin, or a second home where WIFI is not readily available, then you may be able to use your cell phone as a mobile hotspot and fool the panel into thinking it's connected to WIFI. The amount of data in this file is about 250 MB according to Qolsys. Alternatively, you may be able to move the panel to a spot that has WIFI available just long enough to perform the upgrade. In a situation like this, you need to be in control of when the update begins, so in this case, you would want to use the "Patch Tag" method of updating. To do so, once your panel has a WIFI connection, do the following:

Follow these instructions after making sure your panel is on version 2.0.1 or higher. If the panel is on 2.5.0 or 2.5.1, the user must first update to 2.5.3 before running the update for 2.6.0:

  • Touch the small gray bar in the center at the top of the Home screen on the panel.
  • Touch “Settings”
  • Touch “Advanced Settings”
  • Enter a valid Installer or Dealer Code (defaults are 1111 and 2222 respectively)
  • Touch “Upgrade Software”.
  • Touch “Patch Tag” and enter: iqpanel2.6.0 then touch “OK”.
  • Important: If you need to install 2.5.3 prior to this update, the Patch Tag for that version is: iqpanel2.5.3. Run that update before running the Patch Tag for 2.6.0.
  • Touch “Upgrade Using Network”. If the panel is connected to WIFI, the system will begin downloading the update, it will be installed when the download completes. Once the update begins Do Not Touch The Screen! The update will take about five (5) minutes, and the panel will reboot as a part of the process. When the panel returns to the home screen and the Green LED at the right lights, the process has completed.

What do you think about the new Qolsys firmware, and the new products they have in the pipeline? Share your thoughts in the comments below. Is there a security topic you'd like to see us discuss? If so, leave a comment and we'll be happy to cover any security-related topics of interest. As always, we look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Most of these best security systems lists are frustrating to navigate. Many of them include companies and their respective rating. ADT, Brinks, Vivint, or others will make the cut. We’re sad to never be included in these lists. But that reflects the state of the industry. Many people don’t know that other alarm monitoring companies exist. Still others only include the new DIY systems that are on the market like Simplisafe, Ring, Nest, or Scout. Consumer Reports, for example, only reviews Nest, Ring, Abode, Frontpoint, Simplisafe, and Samsung’s Smarthings integrated GC3 that they produced for ADT. This list is, in no way, a complete list of products. Moreover, it completely ignores legacy and current systems. And, while we like “new,” being in the industry, we are proud to say that the so-called “professional” systems that are out there are better than these systems for a few simple reasons.

Our list includes exclusively professional equipment. It is the same equipment that ADT or other installation companies might sell you. We’ve tested a lot of these DIY systems. They work well to varying degrees. But we have found that nothing surpasses the quality or features of a professional system. What’s more, we provide the help that you need to turn these professionally installed systems into the DIY systems that you may be looking for.

Yup! You heard that right. You don’t need a professional to install a professional home security system.

They are simple enough to install and operate that you can do it yourself. Additionally, you can have them monitored by anyone. We think that this feature is the feature that sets them apart from any of the new “DIY” systems. Simplisafe systems must be monitored by Simplisafe. Ring systems must be monitored by Amazon. Nest systems must be monitored by Google’s chosen provider: Monitronics (now Brinks).

But a professional system can be monitored by any alarm company. We certainly do monitor them. But if you’re interested in having a local installer at your beck and call, you can have Larry the alarm installer from down the road monitor it as well.

In all, these systems are not easy to rank. Each one comes with its own set of features and benefits. So we have organized the following list based on your own possible set of needs.

So without further ado, here are the 3 best alarm systems of 2020.

Best Interactive Service of 2020

Alarm.com

Interactive services are the apps that allow you to control your alarm system from your phone or computer. There are dozens of such services. Some companies, such as the ones we mentioned above have their own proprietary service. But then, there are a few universal services. These are sold by Interlogix, DSC, Alarmnet (Honeywell), Securenet and others. Our favorite of these interactive services is alarm.com. It is a great service that works with Qolsys products, DSC products, Interlogix products, 2GIG products, and more. Unfortunately, it does not work with most Honeywell products.

It provides a wide array of controls, including the ability to use SIRI to command your system and schedule Z-Wave scenes. The drawback is that Alarm.com requires users to sign up for cellular monitoring. This is the best, most robust kind of monitoring. But some users don’t want that level of connectivity. Some end users are satisfied with just IP monitoring. In the 90s, particularly, phone line monitoring was the norm. Modern monitoring has found other, better, more secure options. No one can cut the line of a cellular device, for example. IP monitoring suffers from many of the same problems as phone line monitoring. But it also allows users to get many of the advantages of cellular monitoring, including homeowner’s insurance discounts. Even still, despite this drawback of alarm.com, it is our preferred interactive service.

That said, its closest competition is Honeywell’s Total Connect. Total Connect only works with Honeywell. It does almost everything that Alarm.com does, with a few specific differences - no native SIRI control, for example. That said, Honeywell makes excellent equipment. The Lyric alarm, for example, works with HomeKit. This integration will allow individual control of the unit from SIRI. This is actually more robust than even alarm.com’s SIRI integration. And the only options that a HomeKit user has on the Alarm.com side is the DSC iotega, which is a system that works, but for many reasons, doesn’t make this list.

Ultimately, whether you use Alarm.com or Total Connect, it will depend on your system’s interactive service compatibility. If you are interested in system features, look at the systems below. If you are more concerned with the usability of the interactive service, you can certainly pick a system based on its qualities and compatibility with an interactive service.

Runner Up: Total Connect

Best Overall System of 2020

Qolsys IQ Panel 2+

This security system is an amazing piece of equipment. It is a great looking home automation controller as well as a security system. It’s Alarm.com compatibility is a great feature that makes the Qolsys IQ Panel 2+ a stratospherically better panel than almost anything on the market. The system is built on the Android operating system. Ultimately, the Qolsys is what you get when you beset a Silicon Valley company with the task of building a professional alarm system. It is feature filled, beautifully and competently built.

One of the frustrations with the Qolsys is its lack of modularity. It is an expensive system. Everything is built in to the panel. Whereas most security systems allow a user to install (and uninstall) a cellular communicator, the Qolsys builds the communicator right into the panel itself. This sounds like a great feature, and it is. But that’s until the system’s communicator becomes obsolete. It’s something that doesn’t happen very often, but every 10 or so years, the cellular companies deprecate one or more of their networks. At this very moment, Alarm Grid’s subscribers are preparing to replace thousands of communicators. As Verizon and AT&T deprecate their old CDMA and 3G networks, the systems that have included these communicators are coming due for an upgrade. The drawback of the Qolsys is that there is no upgrade per se. Rather, end users with an older Qolsys will have to replace the entire panel.

Despite this drawback, the Qolsys is a great unit. One of its best features is its ability to take over old systems. For those that are looking to replace an old system, the Qolsys is a great choice. The new Qolsys IQ Panel 2 Plus’s come in different varieties, each with a daughter card that allows them to grab the signals from other company’s wireless sensors.

Just awesome!

In our opinion the best feature of the new Qolsys IQ Panel 2 Plus, however, is not its amazing home automation features or its ability to take over other systems. It’s not even its slick Android interface. All those features can and are replicated by its competitors. Rather, our favorite feature of the Qolsys is its sensor’s ranges. The Qolsys is a panel whose PowerG sensors, which are encrypted, are capable of being monitored over HUGE ranges. We have seen the Qolsys detect sensors that are nearly a half mile away. This makes the PowerG line of sensors that are compatible with the Qolsys an amazing feature that no other all-in-one system has. These sensors basically remove the need for expensive repeaters. They are modern sensors that no other company has.

Eat your heart out Google, Amazon, and all ya’ll Silicon Valley companies trying to build better systems. None of these systems even touch the quality of the Qolsys in our opinion.

Runner-up: 2GIG GC3e

Best HomeKit Compatible System of 2020

Honeywell Lyric

The Lyric is in competition with DSC’s Iotega, which works as a HomeKit controller. If you’re looking for HomeKit control, and your home is filled with DSC sensors, the Iotega might be a better choice for you. But if you’re starting from scratch, nothing is better than the Lyric controller. This system is compatible with a wide range of sensors, including America’s most sold sensor, the 5816. It looks great on a wall. It’s fairly priced, and it does everything you’d want from a good looking system, including a photo album feature.

We sold more Lyric’s in 2019 than any other system on the market. This is largely due to Honeywell’s trusted name. The quality exemplified by the brand is epitomized in this sleek wall unit. Its versatility is buttressed by the hundreds of compatible sensors that Honeywell has released over the years.

We like Honeywell’s no-nonsense approach to monitoring. They put security over all. They were the first mainstream system on the market with both a panel and encrypted sensors. And the sensors work immensely well. We love Honeywell. We love the Lyric. At the moment, we believe that the Qolsys has surpassed the features of Honeywell’s alarm system. But the Lyric has one feature that Qolsys simply does not: the ability to be monitored by WiFi only. In fact, nearly all of Honeywell’s all-in-one systems can be monitored by WiFi only. For an end user, this means that they can be professionally monitored at a price that is significantly cheaper than that of a cellular system. For the budget conscience consumer, this presents an amazing opportunity to save money while getting all the benefits of a monitored system, including insurance discounts. We are a big fan of cellular monitoring. But the option is there for those who simply don’t think it’s as important as we do or for those who don’t want to pay the cost of cellular monitoring.

Runner Up: DSC iotega

Best Budget Alarm System

Honeywell L3000


We spent a lot of time debating whether the L3000 would be the best system for someone on a budget. We actually prefer the GC2e as a system. It’s a great looking system, it’s inexpensive, and it uses Alarm.com. But here’s the problem: it requires that anyone using it purchase a cellular communicator. Additionally, because its most minimal monitoring will include Alarm.com. This puts anyone purchasing it into a different category of spending. That said, if it’s not outside of your budget, the GC2e is a great system. It is our runner-up, because it is a good budget system, but it’s not great.

The low price of the L3000 is no indication of its quality. It is because it is a legacy system. It is often used by alarm companies that are putting systems into big apartment buildings. The system is amazing. It’s effective, will last for a very long time. Unfortunately, it’s ugly and can be a bear to program. Luckily for owners, programming is not something you do more than one time. And if you’re with Alarm Grid, there is a strong chance that we can program it for you.

Unlike the GC2e, the L3000 allows users to do IP-only monitoring. It also allows old-school phone line monitoring. That means, for the budget-conscious consumer, the L3000 is both cheaper to purchase than the GC2e, and will save an end user between $10 and $20 per month. In all, the L3000 will save anyone who installs it between $120 and $240 per year, while also being incredibly affordable at the outset. Huzzah! Oh, and for those concerned about sensors, the L3000 works great with any of the Honeywell’s 5800 sensors. You will have a ton of sensors to pick from, which also makes the system the most versatile budget system on the market.

We love the L3000 as a budget system.

Runner-Up: 2GIG GC2e

Best Wired Alarm System of 2020

Honeywell VISTA 20P

This is an oldie but a goodie. The VISTA 20P has been produced by Honeywell for many many years now. It's an excellent system with great, modern features. Honeywell produces update chips that they release every once in a while. These updates allow the system to take advantage of modern features like those available in the VAM or Tuxedo Touch. Home Automation? You can do it using the VISTA 20P. Manage both wired and wireless sensors? You can do that very easily with the VISTA 20P by adding a wireless receiver or a keypad with a wireless receiver built in. In all, this system has all the same great features of its all-in-one wireless contemporaries. 2 drawbacks to speak of, though: 1) it's big and bulky; 2) programming these systems sucks.

Runner-up: Honeywell VISTA 21iP

What Else is Coming in 2020?

Every year, professional systems get better and better. The systems that are coming soon are no different. In the coming months, we are expecting the release of Qolsys’s new Hub as well as Honeywell’s ProSeries panel. 2GIG hasn’t announced anything yet. But they just released the encrypted versions of their panels.

Unfortunately, 2019 saw the close of Interlogix’s security systems production division. While interlogix was not known for the incredible innovation of their systems, they made great budget models that gave users a simple, cheap entry point into security systems. They will be missed. But the three main producers--2GIG, Qolsys, and Resideo (formerly Honeywell)--are continuing to pioneer new and innovative features.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

It's less than two weeks until Christmas, and time is running out to get presents! If you're looking for a new alarm system, then you might strongly consider the Qolsys IQ Panel 2 Plus. This guide will help whether you are looking at a new IQ Panel 2 Plus or adding upon an existing system.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

The Qolsys IQ Panel 2 Plus is undoubtedly one of the top security systems available as of now. In fact, we recently rated it as our top security system of 2019. The IQ Panel 2 Plus is the masterpiece creation of Qolsys, a company that will celebrate their 10th year anniversary in 2020. Despite being relatively new to the game, the company still managed to put out a beautiful, state-of-the-art alarm panel that is perfect for everyone from DIYers to large businesses.

The laundry list of features offered from the Qolsys IQ Panel 2 Plus is mind-boggling. This sleek and modern security panel offers 128 wireless zones, integrated WIFI, a built-in LTE cellular communicator (AT&T or Verizon), an integrated Z-Wave Plus controller, automatic Bluetooth disarming, a built-in 5 MP camera for automatic disarm photos when enabled, partitioning support for up to four (4) partitions, live-streaming for compatible Alarm.com Cameras, an integrated glass break sensor, touchscreen controls, one-touch panic buttons, and so much more.

Building a Qolsys IQ Panel 2 Plus from Scratch

Qolsys iq panel 2 verizon 3 1 kit wireless alarm system 3 door sIf you are considering a new Qolsys IQ Panel 2 Plus System, then the one big thing you will want to keep in mind is that there are three (3) different versions of the system. This refers to which legacy daughtercard is installed inside the panel. The legacy daughtercard determines which wireless frequency is supported by the system for using wireless sensors. Each of these three legacy frequencies supports a large wireless sensor lineup. If you are just starting out, then you can consider them equal on all counts. We recommend going with the 319.5 MHz version for the sole reason that it is the least expensive. The only real reason to choose the 345 MHz version or the 433 MHz version is if you have existing wireless sensors that you are hoping to use with the IQ2.

One other important thing to note is that you are not restricted to only using the legacy frequency of wireless sensors with your system. Every version of the Qolsys IQ Panel 2 Plus can also support wireless PowerG Sensors. This is true whether you are using the 319.5 MHz version, the 345 MHz version, or the 433 MHz version. PowerG Sensors are known for their incredible wireless range and extremely secure communication. The sensors can communicate from up to 2,000 feet away from the IQ Panel 2 Plus when used with a direct line of sight. Every signal is sent using military grade 128-bit AES encryption for maximum security. We believe that the PowerG Sensors are the best security sensors for the Qolsys IQ Panel 2 Plus, even with the legacy frequency support.

Once you have determined whether you want the 319.5 MHz version, the 345 MHz version, or the 433 MHz version, you must also determine which cellular service provider you will use with the system. Every version of the Qolsys IQ Panel 2 Plus includes a built-in cellular communicator. You can choose between AT&T LTE and Verizon LTE service. We recommend going with whichever service works best in your area. Please note that any monitoring expenses will be the same whether you use the AT&T version or the Verizon version. This is because cellular service expenses are covered by your alarm monitoring company as part of your alarm monitoring plan. Because of requirements mandated by Alarm.com you must activate the cellular communicator inside your Qolsys IQ Panel 2 Plus System for monitoring service. This means that you will need an alarm monitoring plan that includes cellular service, such as an Alarm Grid Gold Plan. You can learn all about the monitoring plans offered from Alarm Grid on our alarm monitoring page.

When buying a new Qolsys IQ Panel 2 Plus System, it is recommended that you get one of the pre-configured system kits from Alarm Grid. These kits include everything you need to get started with a new Qolsys IQ Panel 2 Plus. Assuming you go with the 319.5 MHz version (the least expensive), you can choose from a total of eight (8) kits. You will need to decide whether you want a system with AT&T LTE or Verizon LTE, and you will need to decide whether you want the kit to include encrypted PowerG Sensors or non-encrypted 319.5 MHz sensors. You must also choose whether you want a 3-1 kit or a 10-1 kit. A 3-1 kit will have three (3) door/window contacts and one (1) motion sensor, while a 10-1 kit will have ten (10) door/window contacts and one (1) motion sensor.

These eight (8) kits are listed below:

Additionally, you are welcome to check out our entire list of Qolsys Security System Kits if you are looking for a kit with a 345 MHz or 433 MHz IQ Panel 2 Plus System.

Sensors for New and Existing IQ Panel 2 Plus Systems

Dsc pg9312 wireless powerg outdoor door slash window contact

When shopping for sensors for an IQ Panel 2 Plus, you must consider two factors. The first is which version of the system is it (319.5 MHz, 345 MHz, and 433 MHz). The second is whether or not the system is an actual IQ Panel 2 Plus, or if it is an original IQ Panel 2 System. By answering that first question, you can determine which type of legacy sensor frequency you can use with the system. Of course, this is a non-issue if you are using exclusively PowerG Sensors.

Having to consider whether or not an IQ Panel 2 Plus System is actually an IQ Panel 2 Plus might seem silly at first. But the thing is that the IQ Panel 2 Plus looks exactly the same as an original IQ Panel 2 System. If you are buying sensors for someone else, then you might not know whether or not the system is a Plus model or an original Non-Plus model. This is important to determine, as only the IQ Panel 2 Plus can support PowerG Sensors. There is no way to use PowerG Sensors with an original IQ Panel 2 System. If you are wanting to surprise a friend or family member with some new sensors, then it may be important to ask whether the system they are using is a Qolsys IQ Panel 2 Plus or an original Qolsys IQ Panel 2. If the system is an original Non-Plus IQ Panel 2, then the only sensors it can support are the 319.5 MHz sensors from Qolsys and Interlogix. This includes the Qolsys S-Line Sensors, which use rolling code encryption.

Qolsys iq panel 2 verizon 7 security panel w slash z wave ready For the purpose of this blog post, we will assume that the system is a Qolsys IQ Panel 2 Plus, and that you are looking for PowerG Sensors. Remember, PowerG Sensors will offer the best range and the strongest wireless security. If you are considering other wireless sensors for a Qolsys IQ Panel 2 or IQ Panel 2 Plus, then we recommend emailing support@alarmgrid.com for further help. We have 319.5 MHz, 345 MHz, and 433 MHz sensors on our website, and we are happy to help you find them. As a reference, 319.5 MHz generally refers to legacy Qolsys and Interlogix Sensors, 345 MHz generally refers to legacy Honeywell and 2GIG Sensors, and 433 MHz generally refers to legacy DSC Sensors.

The PowerG Sensor lineup is quite robust, and there are plenty of sensor types to choose from. We will not cover every PowerG Sensor here. But we will cover some of the basic ones, as well as some of the more interesting ones that can really open up new possibilities for using your Qolsys IQ Panel 2 Plus System. Keep in mind this list is not exhaustive, and there are plenty of other PowerG Sensors out there beyond what we have listed here.

Accessories for Your Qolsys IQ Panel 2 Plus

Now that we have covered sensors you might use with your Qolsys IQ Panel 2 Plus System, you might also want to look into some accessories. Alarm.com Security Cameras are an excellent option if you are willing to get an alarm monitoring plan that includes video surveillance, such as an Alarm Grid Platinum Level Plan. The Qolsys is unique in that it can actually live-stream certain Alarm.com Security Cameras right from the panel itself. You will also be able to view the live feed for these camera from pretty much anywhere using the Alarm.com Mobile App on an Android or iOS device. There are a bunch of Alarm.com Cameras to choose from, but right now we really like the Alarm.com ADC-V523 for indoor use, and the Alarm.com ADC-V723 for outdoor use.

You will also likely want to take advantage of the system's built-in Z-Wave Plus controller. This will allow you to use a variety of Z-Wave Plus devices, including smart lights, door locks, and thermostats. You can also use classic Z-Wave devices with the system, but you should use Z-Wave Plus devices to maximize the range and battery life. And keep in mind that you can create special smart scenes using Alarm.com to have your Z-Wave devices activate automatically based on a schedule or with certain system events. There are so many Z-Wave devices to choose from, but here are some of our favorites for use with an IQ Panel 2 Plus:

We are also sure that many IQ Panel 2 Plus users will want to set their system up for garage door control. Luckily, there is a great Z-Wave device for the job. The Linear GD00Z speaks Z-Wave, and it can easily enroll with your Qolsys IQ Panel 2 Plus System. The module also comes with its own tilt sensor for identifying when the garage door is opened or closed. And as a Z-Wave device, you will be able to include it into your smart scenes as well!

Linear gd00z 4 z wave garage door openerThere are other miscellaneous accessories you might also want to use with the Qolsys IQ Panel 2 Plus. If you want an external keypad, then the Qolsys IQ Remote is far and away the best option. This is a powerful touchscreen keypad that can do pretty much everything that the panel itself is capable of accomplishing. This is fantastic if you want to have an additional designated location for controlling your system in your home or business. The remote conveniently pairs across WIFI or an Access Point (AP), making it super easy to complete the integration. It even features a built-in camera for disarm photos, just like the main panel!

We also want to mention that while the IQ Panel 2 does come included with a desk stand for resting the system on a desk or table, you also have the option of getting the sturdier Qolsys IQ Stand, which will certainly keep your system upright. This is perfect if you have no intention of mounting your panel to the wall.

Qolsys iq remote ag iq panel 2 remote touchscreen keypadThat concludes our Qolsys IQ Panel 2 Plus buying guide! If you have any questions about the system or our monitoring service, please reach out to us. We listed our email earlier in this post, but if you need it again, it's support@alarmgrid.com. You are also welcome to call us at (888) 818-7728 during our normal business hours. We are here from 9am to 8pm ET M-F. Our team is looking forward to working with you and helping you find the perfect security system for your needs.

Tags: , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We would like to inform you that Software Update 2.3.3 is now available for the Qolsys IQ Panel 2 Plus and original IQ Panel 2. This update does not add any new features, but it does include some useful system improvements and general fixes. The update can be easily applied.

Qolsys iq panel 2 at and t wireless security system with at and

Software Update 2.3.3 really only applies useful improvements for the IQ Panel 2 Plus. However, original IQ Panel 2 owners can still perform the update to get their systems on the latest version. This update is very important for helping our technicians provide the best possible support for IQ Panel 2 Plus owners.

The following general improvements are included in Software Update 2.3.3:

  • Can now obtain the Long Sensor ID for the PowerG board and report it to Alarm.com
  • Can now obtain the Device Firmware Version for any auto-learned PowerG Sensor enrolled after updating to 2.3.3 and report it to Alarm.com.
  • Can now send Alarm.com the Radio Firmware Version and Modem Firmware Version for the PowerG board.

To perform the update, your system must be running at least 2.0.1, be connected to a local WIFI network, have its power transformer plugged-in, and have a charged battery. Once you have met the requirements, start from the main system screen. Press the small grey bar at the top. Choose Settings > Advanced Settings > enter the Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.3.3 > OK > Upgrade Using Network > OK.

It will take about five (5) minutes for the update to download. The panel should reboot to the home screen when complete. If you have any questions about this update, do not hesitate to email us at support@alarmgrid.com, or call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F.

Tags: , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We are excited to announce that the Qolsys IQ Panel 2 Plus with support for legacy 319.5 MHz sensors and PowerG sensors is now available for just $399.99. This is significantly reduced from the previous price-tag of more than $500. Now is a great time to buy an IQ Panel 2 Plus!

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

The IQ Panel 2 Plus is one of the most advanced wireless all-in-one security systems on the market today. The system supports up to 128 wireless zones, and it serves as a fully functional Z-Wave Plus controller. It also offers advanced features like Bluetooth disarming, live streaming with Alarm.com Cameras, facial recognition, partitioning and more. This version of the IQ Panel 2 Plus supports both PowerG sensors and legacy 319.5 MHz sensors from Qolsys and Interlogix/GE. It is available in both Verizon LTE and AT&T LTE options. Both 319.5 MHz versions have been reduced in price to $399.99 effective as of now.

Please note that this price reduction only affects the 319.5 MHz versions of the IQ Panel 2 Plus. The 345 MHz versions (legacy Honeywell and legacy 2GIG) and the 433 MHz versions (legacy DSC) have retained their original pricing. These versions are also available in AT&T LTE and Verizon LTE variants. You can find those panels with the following links:

We would also like to announce that the original IQ Panel 2 has been discontinued. It is no longer available for purchase, effective immediately. As a result, all of the Alarm Grid System Kits that included the original IQ Panel 2 have been updated to offer the IQ Panel 2 Plus 319.5 MHz System instead. At this time, we are only offering kits with the 319.5 MHz version of the IQ Panel 2 Plus. If you want the 345 MHz or 433 MHz version of the IQ Panel 2 Plus, you will need to purchase the system individually.

Each IQ Panel 2 Plus System Kit includes a brand-new IQ Panel 2 Plus 319.5 MHz System, Versa-GE Door and Window Contacts (3 or 10 depending on the kit), a single Qolsys IQ Motion-S Sensor, a power cable, a plug-in transformer, and a built-in LTE communicator (AT&T or Verizon). You can find these kits in the links below:

If you have any questions about the IQ Panel 2 Plus, please reach out to us. The best way to reach us is to email support@alarmgrid.com, and we will respond back as soon as possible. You may also call us at (888) 818-7728 during our normal business hours of 9am to 8pm EST M-F. We look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We have received news that Qolsys has made the latest firmware version for the IQ Panel 2 available through downloader rather than having to apply a patch tag. The company has also refined the facial recognition feature on the IQ Panel 2 to work more effectively than before.

Qolsys iq panel 2 at and t wireless security system with at and

As you may remember, we talked about the facial recognition feature last month. We found that it worked fairly well at the time, but we're happy to hear that Qolsys has been continuing to improve the feature. Users should now find that the panel camera now recognizes suspicious faces more accurately. Once a user has properly calibrated the feature, they can receive alerts regarding any suspicious activity via text and/or email. We recommend reading our previous blog for more information about the feature and how to get started.

If you haven't already updated your IQ Panel 2 System, now is a great time to do so. Start from the main screen of the panel. Then press the small grey bar at the top. Choose Settings, followed by Advanced Settings. Then provide the system's Installer Code, which is 1111 by default. Select Upgrade Software, and then Upgrade Using Network. Then complete the on-screen instructions to perform the upgrade. Please note, your IQ Panel 2 System must be connected with a local WIFI network for the upgrade to go through successfully.

Remember, you need at least 10 saved faces before the facial recognition feature goes into effect. And the more faces you have, the more accurate the software will be. We recommend the strategy of repeatedly arming and disarming to continuously take photos until you have enough images. The images you take might not appear on Alarm.com right away. You may need to logout and then log back in before the images will appear. But if you're like us, you will soon have a surplus of images!

Then we had a different person disarm using that same code. Sure enough, we received a notification in our email!. The IQ Panel 2 was able to distinguish between the approved saved images and the different individual.


Remember, you must enable the feature in two different areas on Alarm.com. You must provide contact information in the Users tab and configure the feature:


And you must set the same recipient in Unexpected Activity within the Notifications tab:


We hope that you will enjoy using this new feature on your IQ Panel 2. Remember, you need a monitoring plan if you want to use this feature and Alarm.com. You can sign-up for monitoring by clicking the orange Alarm Monitoring button in the upper-left corner of this page. Please email support@alarmgrid.com if you have any questions.

Note: Due to privacy concerns, this feature is currently available for users in the 50 US States. We are hopeful that this feature will be made available to users in Puerto Rico and Canada in the future.

Tags: , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We have learned that Alarm.com has rolled out the facial recognition feature for the Qolsys IQ Panel 2. This feature notifies a user if an unrecognized face disarms the system using a valid code. The user can receive these unexpected activity alerts via text and/or email.

Qolsys iq panel 2 at and t wireless security system with at and

This is the first time we have seen a home security system using facial recognition technology. Although the feature is still in its early stages, we believe it will be very useful in helping end users remain safe and secure. Facial recognition will work with both the standard IQ Panel 2 and the IQ Panel 2 Plus, as long as the system is connected with a local WIFI network and running at least Firmware Version 2.3.0 or higher. More about this Firmware Update is available here.

In order to use this feature, you must enable the Capture Panel Camera Disarm Images from within the IQ Panel 2 settings. To do this start from the main screen of the system, and press the small grey bar at the top. Choose Settings > Advanced Settings > Installer Code (default 1111) > Installation > Camera Settings. Then make sure the Disarm Photos option is enabled. Press the picture of the house at the bottom of the screen to return to the home screen when finished.


The setting will also need to be enabled and configured through Alarm.com. If you don't already have a monitoring plan with access to Alarm.com, you can check out our alarm monitoring page for more information. If necessary, check with your alarm monitoring company to make sure that the Unexpected Activity Alerts feature and the Images - Plus feature are both enabled. At this time, only customers in the United States can use this feature.

Each user should have their own access code for the system. This is necessary for the facial recognition feature to work properly. If you need to create a new user, you can login to Alarm.com through the website. Click the Users tab on the left, and then choose Add New User. Then follow the steps to add a new user to the system. This will involve choosing a system code and providing any notification information.

From there, you will proceed to turn on the facial recognition feature. Login to the Alarm.com website, and choose the Settings tab on the left. Then choose Facial Recognition. You must then approve the necessary agreements before continuing. This will tell the panel to start collecting data for facial recognition. However, you won't be able to use the feature right away. You need to collect some images first!

Most users should just go about their business collecting images as they use the panel. Or you can be like us and repeatedly arm and disarm the panel to quickly collect images. Make sure you are using the code associated with the user you want to enable the facial recognition feature for. Just be aware that it may take a few moments for the images to show up on alarm.com.

Once you have collected some images, choose the Settings option on the Alarm.com website, and choose the Facial Recognition option. Press the blue Get Started button underneath Configuration. Then choose the user you want to configure facial recognition for. Choose the calibration option. Alarm.com will show you if there are any images to review. Go through and choose the checkmark for any image that is yours. If you see any image without your face, press the X button. You will need a minimum of 10 images to enable the feature.

Once you have 10 images, you can enable Unexpected Activity for facial recognition. From Alarm.com, choose the Notifications tab. Then find the Unexpected Activity option, and make sure it is turned on. Then press the pencil on the right to edit the settings. You will see the option for Facial Recognition. Make sure it is enabled for the user with at least 10 approved images. Then you can choose where the notifications will be sent at the bottom of the screen. Both emails and phones for text messages can be configured. Press Save when finished.

You will then receive alerts for any unexpected activity!


If you have any questions about this feature, please reach out to us! You can email us at support@alarmgrid.com or call us at (888) 818-7728 during our normal business hours of 9am to 8pm EST M-F. We look forward to helping you get the very most out of your IQ Panel 2 System.

Note: Due to privacy concerns, this feature is currently available for users in the 50 US States. We are hopeful that this feature will be made available to users in Puerto Rico and Canada in the future.

Tags: , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We have very exciting news for Qolsys IQ Panel 2 users today. Software update 2.3.0 is now available! This biggest highlight of this update is the ability to control up to four distinct partitions with the system. Other great features are also provided to enhance the system.

Qolsys iq panel 2 at and t wireless security system with at and With the all-new partition support, the IQ Panel 2 is now the second wireless alarm panel we carry to support the feature, after the 2GIG GC3. This feature allows a user to essentially section off their alarm system so that they can restrict access to certain areas. Each partition can be assigned a certain set of user codes in order to determine who can access each part of the security system.


After receiving the update, a screen lock feature will also be added to limit access to the panel. Please note that you must enable partitions from within Installer Settings before the feature can be used. This will also apply the screen lock. After you have done this, the main screen will reflect that partitioning has been enabled, and there will be a Partitions option within the Advanced Settings menu.



Also note that this update is available for both the original IQ Panel 2 System, as well as the Qolsys IQ Panel 2 Plus. Other features that also come with the update include:

  • Support for new PowerG devices for IQ Panel 2 Plus System, including the PG9936 Smoke Detector, PG9933 CO Detector, PG9307 Recessed Contact, PG9309 Vanishing Door and Window Contact, PG9309 Door and Window Contact with Auxiliary Input, PG9312 Outdoor Door and Window Contact, and PG9862 360-degree Ceiling Mount PIR Motion Sensor.
  • Ability to create 6-digit user codes.
  • Improvements to panel camera, including "peek-in now" and "peek-in next motion" from Alarm.com, as well as disarm photos after remote disarm through Bluetooth, key fob or ADC.
  • Local automation features for panels not yet set up with ADC, including automatic locking of all locks at night, setting all thermostats to automatic mode, and controlling lights to activate Light 1 at night and turning off all lights in the morning.
  • Maximum number of thermostats increased from 6 to 10.
  • Maximum number of door locks increased from 6 to 20.
  • User code names now sync automatically between the panel and ADC.
  • New Sensor Type of "Temperature - Group 51" for the PG9905 PowerG Temperature Sensor.
  • Fixed various bugs.

To perform the update, press the small grey bar at the top of the main screen. Choose Settings > Advanced Settings > Installer Code (default 1111) > Upgrade Software > Patch Tag. Then enter in "iqpanel2.3.0". Press OK. Then choose "Upgrade Using Network". If the panel is connected via WIFI, you will be able to begin the installation process.

If you have any questions about this update, please reach out to us! You may email us at support@alarmgrid.com. You may also call us at (888) 818-7728 during our normal business hours, which are 9am to 8pm EST M-F. Please note that our office will be closing at 6pm on December 31st, and we will be closed all day on January 1st.

Tags: , , , , , , , , , , , , , , , ,

Comments