Announcing the DSC PG9936 PowerG Smoke & Heat DetectorPosted By Michael Goris
Hi DIYers! Today, we're taking a quick look at the new DSC PG9936 PowerG Smoke & Heat Detector. This device is great for anyone looking for a reliable fire-safety sensor for use with a PowerG-compatible System. The new sensor offers some impressive features, and it is super easy to use!
The DSC PG9936 replaces the older DSC PG9916. The new model features an updated designed and enhanced detection for improved functionality. However, most of the specs from the PG9916 return to the PG9936. If you have an existing PG9916, then it will continue to work just fine. But it's great to see a new smoke and heat detector available!
For smoke detection, the PG9936 uses photoelectric technology. This is arguably the most consistent and more reliable smoke detection method available, and it will help ensure that any fire is detected as quickly as possible. The sensor also features a built-in 135°F fixed temperature heat sensor for redundancy. This will give you peace of mind in knowing that any fire will be properly detected.
Any system that supports PowerG can use the DSC PG9936 Sensor. This includes any Qolsys IQ Panel 2 Plus and any DSC PowerSeries NEO with added PowerG Receiver. It can be easily auto-enrolled by putting the panel into its enrollment mode and then powering on the PG9936 by inserting its batteries. You are welcome to check out the PG9936 Install Guide for more information.
Also returning to the DSC PG9936 is one-go-all-go support. This means that if the sensor is activated, all other PowerG Smoke Detectors paired with the panel will also activate. This is very important for ensuring that everyone in the building is properly alerted to the fire. Remember that each PowerG Smoke Detector has an 85 dB sounder for alerting building occupants.
Each PG9936 uses three (3) AAA batteries for power (included), and has a three (3) battery life on average. The sensor features a tri-colored LED status light for assisting with enrollment and troubleshooting. It measures five (5) inches across and is 2.5 inches deep. There is a test button on the device for easy testing when needed. Remember to place your system on test mode first!
You can get the PG9936 from the Alarm Grid website right now! If you have any questions about the DSC PG9936 Smoke & Heat Detector or any of our other products, please email us at email@example.com. Our support team checks emails between 9am and 8pm ET M-F. We look forward to hearing from you!