The Honeywell LYNX Touch L5210 and L7000 Updater Tool is Here!

Posted By

Hi DIYers! We are happy to announce that the Honeywell LYNX Touch Updater Tool is now available for purchase on our website. This easy-to-use module allows users to conveniently update the firmware for any Honeywell L5210 or L7000 and get it running on the latest software version.


As you may recall, LTE Communicators for the L5210 and L7000 were released last year. There is the LTE-L57A for the AT&T LTE Network and the LTE-57V for the Verizon LTE Network. But these systems require a minimum firmware version to support these modules. The LTE-L57A requires firmware version 9.00.209 or higher, while the LTE-L57V requires firmware version 9.00.201 or higher. Any newly manufactured L5210 or L7000 will already be running a high enough firmware version. However, older L5210 and L7000 Systems may require a firmware update.

It used to be possible to push down an over-the-air (OTA) firmware update to an L5210 or L7000. However, this is no longer the case. All firmware updates for these two systems must be applied using the Honeywell LYNX Touch Updater Tool, officially known as the Honeywell LYNXTOUCH-MSD. This tool allows users to update the firmware for their L5210 or L7000 System at their own leisure. It will also come in handy if Resideo decides to release any future firmware updates for these systems at some point.

Alarm Grid has already released an FAQ to help you use this new device to upgrade your L5210 or L7000 System. We also invite you to check out the Installation Guide for the module for even more information. Remember, you will want to get your LYNX Touch System connected with an LTE network sooner rather than later. The 3G sunset is rapidly approaching, and LTE connectivity will allow you to greatly extend your system's lifespan!

If you are an Alarm Grid monitored customer with any questions about the Honeywell LYNXTOUCH-MSD Updater Tool, or if you would like to know why upgrading to LTE is important, we encourage you to reach out to us. You may email us at support@alarmgrid.com or call us at (888) 818-7728 during our normal business hours of 9am to 8pm EST M-F. We look forward to hearing from you and answering any questions you might have!

Update: As of October 2019, the LYNXTOUCH-MSD Updater Tool can also be used with an L5200 Panel. See this blog post for more information.

Tags: , , , , , , ,

Comments


Hi Brett, take a look here on how to update it: https://www.alarmgrid.com/faq/how-do-i-use-resideos-new-lynxtouch-msd-tool-to-update-my-lynxto
I think I do have the latest firmware V9.
If I had this device and if Resideo decides to release a firmware update how would I update the files on SD card?
Hi Brett, no, all firmware updates for these two systems must be applied using the Honeywell LYNX Touch Updater Tool, officially known as the Honeywell LYNXTOUCH-MSD.
Are Over-the-Air updates still possible?

Related Products

Taxons
Honeywell LYNXTOUCH-MSD
Firmware Update Tool for LYNX Touch L5200, L5210 & L7000
List Price:
Our Price: $12.99
Honeywell L7000 - Wireless Home Security System with 7 Inch Screen
Honeywell L7000
Wireless Home Security System w/ 7-inch Screen
List Price: $438.00
Our Price: $290.99
Honeywell L5210 - LYNX Touch Wireless Security System with 4-1/3 inch Screen
Honeywell L5210
LYNX Touch Wireless Security System with 4-1/3 inch Screen
List Price: $310.00
Our Price: $194.99