Alarm Grid ADC Customers Now Have More Garage Door OptionsPosted By Julia Ross
Now, in addition to Z-Wave and Liftmaster/Chamberlain MyQ garage door integration, Alarm Grid's Alarm.com customers can use Genie Aladdin Connect retrofit kits, and OHD Anywhere Overhead Door kits to integrate control of garage doors through Alarm.com. This is a server-level integration.
The Genie Aladdin Connect and OHD Anywhere Overhead Door kits are retrofit kits that make older garage doors "Smart". They provide a connection to WIFI, that older garage doors would otherwise not have, which enables them to work with their own remote control app and/or with the Alarm.com app. The benefit of integrating with Alarm.com is that it allows a single app to control multiple types of devices. Also, when the garage door is integrated through Alarm.com, it can then be included in automation scenes based on system events, or schedules.
Each retrofit kit can support up to three (3) separate garage door motors. The Genie Aladdin Connect Retrofit Kit Installation Instructions are available here. the OHD Anywhere Quick Install Guide is located here. There is also a Compatibility Guide, showing which older garage door motors are compatible with the OHD Anywhere retrofit kit. For the most part, any older garage door opener made after January 1, 1993, or with safety beams built-in, should be compatible with either of these kits. Conversely, most newer Chamberlain and Liftmaster MyQ garage door motors are incompatible.
For users with pre-existing installations of either the Genie Aladdin Retrofit Kit, or the OHD Anywhere Retrofit Kit, we have an integration guide (both linked above) showing how to add that integration to your alarm.com account. In order to have the option to add a garage door, you will need to have the Garage Door and Gate Control service package add-on enabled by your alarm dealer. For Alarm Grid customers, this will require the Gold Plan (Self or Full) or higher. At the time of activation, let your activator know that you need this service to be enabled.
If you don't yet have one of these kits installed, but you'd like to add one, there is no need to set the device up through the manufacturer's app. The entire setup, including adding the retrofit kit to WIFI, can be accomplished through Alarm.com by your security dealer. They will need you to provide the proper module serial number to them so that they can complete the server-to-server integration. Once it is complete, you'll be able to access the garage door through the Alarm.com app with no need to download any other app first.
What do you think of this integration? Alarm.com is really committed to third-party integration, and they are doing a bang-up job of making these types of services available to their customers. Do you have an older garage door motor that could be upgraded in this way? Let us know what you think in the comments below, we always look forward to hearing from you!