Interlogix Simon XTi-5i is Now Available!Posted By Michael Goris
Hi DIYers! We are pleased to announce that the Interlogix Simon XTi-5i is now available for purchase from the Alarm Grid website. This is a capable wireless panel, all available at an affordable price. It is perfect for homes and small businesses looking for an effective security solution.
Although the Simon XTi-5i is considered a "budget" alarm system, it still offers the same great performance you would expect out of any modern alarm system. The system is essentially an upgrade over the current Simon XTi-5, but it has been revamped to enhance the end user experience. The 5" full-color touchscreen has been improved from the older models, and it feels more satisfying to control. We tested the touchscreen at ISC West 2019, and we gotta say, it's a major improvement.
New to the Simon XTi-5i is the ability to adjust the user interface (UI). You can have the color schemes for the system menus match those from Alarm.com. You will get the same great orange and white color scheme for the Simon XTi-5i as what you have on Alarm.com. This should help you feel more comfortable, whether you are controlling your system from the panel or from the Alarm.com Mobile App on Android and iOS devices. By using the mobile app, you can access your system from almost anywhere!
In order to access Alarm.com, you will need an Alarm.com Communicator. Both LTE cellular and dual-path options are available. Getting your Simon XTi-5i connected with Alarm.com will provide you with the most reliable alarm monitoring service possible. You will also be able to access Alarm.com through the mobile app to control your system in a variety of ways. This includes arming and disarming, checking system status, controlling Z-Wave devices, viewing Alarm.com Cameras, and more. Please note that you will need a Self Gold Plan or higher from Alarm Grid to access Alarm.com, and a Self Platinum level plan or higher is required for remote viewing of Alarm.com cameras. More information can be found on our alarm monitoring page.
The Simon XTi-5i will actually support the same communicators as all of the previous Simon Panels. We recommend using one of the following communicators:
- Alarm.com XT-511-US-AT (AT&T LTE)
- Alarm.com XT-511-US-VZ (Verizon LTE)
- Alarm.com XT-511-CA-TL (Telus LTE - Canada Only)
- Alarm.com XT-511-US-DP-AT (AT&T LTE & IP)
- Alarm.com XT-511-US-DP-VZ (Verizon LTE & IP)
- Interlogix 600-1048-XT-LTE-AT (AT&T LTE) (Must be FW 191C or higher)
- Interlogix 600-1048-XT-LTE-VZ (Verizon LTE) (Must be FW 191C or higher)
- Interlogix 600-1048-XT-LTE-TL (Telus LTE - Canada Only) (Must be FW 191C or higher)
Each of these communicators also doubles as a perfectly functional Z-Wave controller. This will allow you to start building a complete smart home network of Z-Wave devices. You can create scenes to have your Z-Wave devices activate automatically with certain system events or on a set schedule. This can definitely help you save money on energy costs and make your life more convenient. There are all sorts of Z-Wave devices you can add, including lights, locks, thermostats, water valves, and more!
In addition to a better touchscreen and revamped menus, the Interlogix Simon XTi-5i also packs some more power under the cover. The zone count has doubled up to 80 wireless zones. This is perfect for virtually any home or any small to medium sized business. You can even use two (2) hardwired Normally Closed (NC) contacts with the system and connect them to the main board. Just be aware that these hardwired contact sensors will still cut into the maximum 80 zone limit.
As far as sensor support goes, the Simon XTi-5i facilitates the same great 319.5 MHz sensors that its predecessors supported. This includes the wireless sensors from Interlogix and Qolsys. You can also use the Qolsys S-Line Sensors with the system, though they will not utilize encryption with the Simon XTi-5i. If you want encrypted sensors for the system, you will have to wait for the exclusive lineup of Interlogix Encrypted Sensors, which should be made available soon. It is unknown which form of encryption these sensors will utilize, but it is expected that they will work exclusively with the Interlogix Simon XTi-5i System.
You can now purchase the Interlogix Simon XTi-5i from Alarm Grid! If you have any questions about this exciting new system, please reach out to us! The best way to contact us is to email firstname.lastname@example.org. We will check your email at our earliest convenience and respond back as soon as possible. If you prefer to call us, you can reach us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. We look forward to hearing from you and telling you all about this great new panel!