2GIG TILT1e-345 Posts

Posted By

2GIG GC2e and 2GIG GC3e users have some new options available, as two (2) new products have been added to the growing 2GIG eSeries Lineup. These are the 2GIG TAKE1e-345 Wired to Wireless Converter and the 2GIG TILT1e-345 Tilt Sensor. Both products are available now from Alarm Grid.

2gig tilt1 345 wireless garage tilt sensor

If you are not yet familiar with the 2GIG eSeries Sensors, they offer a more secure wireless connection than the non-encrypted 2GIG 345 MHz Sensors. By utilizing wireless encryption, the 2GIG eSeries devices are nearly impossible for potential intruders to disrupt or takeover wirelessly. This can provide added peace of mind for end users. Just keep in mind that the 2GIG eSeries Sensors will only work with the 2GIG GC2e and 2GIG GC3e. They are not backwards compatible with the older 2GIG Panels, like the 2GIG GC2 and 2GIG GC3.

The 2GIG TAKE1e-345 Encrypted Wireless Takeover Module is a wired to wireless converter that is primarily used when upgrading to a GC2e or GC3e from an older wired alarm panel. When setting up the 2GIG TAKE1e-345, it is recommended that you keep the existing panel in place. This is because the TAKE1e-345 will draw power from the exiting panel, as the unit does not come with its own power supply. Once the device is set up properly, your existing wired sensors will be able to communicate with your GC2e or GC3e across an encrypted wireless protocol.

The 2GIG TILT1e-345 Encrypted Tilt Sensor is a tilt sensor designed primarily to monitor garage doors. The device works by sending an alert signal to the panel whenever the unit is tilted more than 45 degrees. Normally, the TILT1e-345 is mounted vertically on top of a garage door. When the garage door is opened, the sensor will shift to a horizontal position. This will trigger the sensor and tell it to alert the panel. Other potential uses for the 2GIG TILT1e-345 include use on mailboxes, pet doors, and hinged crawl space doors. Really, any structure that opens vertically can make use of the sensor.

Both of these great sensors are now available from Alarm Grid. If you have any questions about the 2GIG TAKE1e-345 or the 2GIG TILT1e-345, or if you want to learn more about how you can monitor your 2GIG GC2e or 2GIG GC3e, then please contact our team by emailing support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , ,

Comments