Alarm Grid has learned that a firmware update for the Honeywell 6290W Touchscreen Keypad is available. Honeywell 6290W Firmware Update 2.01.028.0002 corrects an issue where the keypad Disarm screen does not automatically appear when the Honeywell VISTA System goes into its Entry Delay.
Resideo never made a public announcement about Firmware Update 2.01.028.0002, so it's possible that it may have already been out for a little while. However, we only just heard about it the other day. Although the change it makes is relatively minor, having the Disarm screen automatically appear when the system is in its Entry Delay should make things more convenient for end users. That way, you won't have to manually pull up the Disarm screen when entering the premises and disarming your system. We recommend upgrading to the latest firmware as soon as possible if you haven't already.
Firmware updates for the Honeywell 6290W are provided automatically over-the-air (OTA) from the Resideo AlarmNet360 Servers. They are not pushed down manually, so there is no need to contact us to request the update. However, you must enable WIFI and enable Remote Upgrading for the keypad in order for the update to be automatically sent down. Once the 6290W has checked-in with the AlarmNet Server, the update will be put into a queue and pushed down as soon as possible. This usually occurs within 24 to 48 hours of the keypad checking-in. Alarm Grid recently uploaded a document that shows the process for enabling WIFI and Remote Upgrading, which you can view here.
As a quick reference, WIFI is enabled by pressing the Settings icon (the gear) on the main screen, followed by "System WIFI". From there, toggle the WIFI option, and select the desired WIFI network. Enter the network's password, and click on Connect. Once the process is complete, return to the home screen by clicking on the picture of the house. Next, enable Remote Updating by clicking the Settings icon again and choosing System Info. Click on the Enable Remote Upgrade option to turn on the feature. You can then return home.
Remember, the Settings icon for the keypad looks like .
If you are monitored by Alarm Grid and you need additional assistance enabling OTA updates, please email us at firstname.lastname@example.org. We check for new emails from 9am to 8pm ET M-F. We look forward to hearing from you!
Note: After the update is pushed down to the keypad, it will only be applied once the system is in a disarmed state with no faulted zones and no trouble conditions, including low battery or AC power loss. The update will also be delayed if the system is in programming mode or if there is a zone in alarm memory. The keypad will reboot as part of the update process.