Alarm Grid Video Recap: October 7th - 11thPosted By Michael Goris
Hi DIYers! We're here to cover our video recap. Our video production team released four (4) new videos. Alarm Grid Team Members Jorge and Jarrett each had two (2) videos apiece. We are sure that these new videos will assist you with using your security system. Let's check them out!
Jarrett shows you how to find the Revision Number for a Honeywell L5210 System. This same process also applies to other Honeywell LYNX Touch Systems, including the Honeywell L7000. You might need to find the Revision Number for one of these systems to determine if a certain communicator will work with it or not. Newer version of the Honeywell L5100-WIFI Card, the Honeywell LTE-L57A (AT&T LTE) and theHoneywell LTE-L57V (Verizon LTE) all have minimum firmware revision requirements.
Jorge explains the process for adding a Qolsys IQ Panel 2 Plus to a local WIFI network. The IQ Panel 2 System has a built-in WIFI card for this purpose. The panel uses this WIFI card for communicating with Alarm.com. However, Alarm.com requires that the system's built-in cellular communicator is activated for monitoring service. As a result, Alarm Grid customers need a Gold or Platinum Level Plan if they want to use this panel for monitoring service. Since the IQ Panel 2 has both built-in WIFI and cellular, it is dual-path ready right out of the box.
Jorge discusses partitioning for the Qolsys IQ Panel 2 Plus. This system can support up to four (4) partitions. The partitioning feature must be enabled from Installer Settings before it can be used. Once partitioning is enabled, each system zone can be assigned to one of the four partitions. Each partition can be Armed and Disarmed individually and assigned a different set of user codes. This is perfect for restricting access to only a certain portion of the security system for each user code.
Jarrett smiles as he tells you the unfortunate news that the Honeywell Lyric Controller cannot support DSC Wireless Sensors. The DSC Wireless Sensors come in two (2) different varieties. There are the 433 MHz non-encrypted DSC Sensors and the 915 MHz DSC PowerG Sensors, which utilize 128-bit AES encryption. The Lyric System does not have a wireless receiver capable of supporting either of these sensor types. But there is still some good news, as the Lyric can support 345 MHz Sensors from Honeywell and 2GIG and Honeywell SiX Series Sensors.