Alarm Grid Video Recap: September 28th - October 2ndPosted By Michael Goris
Alarm Grid is back with another video recap! We've got some great new videos to help you get the very most out of your security system. As always, we hope that you find the new videos to be informative and helpful. Let's check out the newest tutorial videos from the Alarm Grid team!
I show you how to add a Honeywell LTE-XA or Honeywell LTE-XV to a Honeywell VISTA P-Series Alarm Panel. The LTE-XA and LTE-XV are cellular communicators used by VISTA Alarm Panels to communicate with the AlarmNet servers. Adding a communicator to a VISTA System is necessary for getting it monitored and set up with the Total Connect 2.0 platform for controlling the system remotely. The communicator will use a 4-wire connection that is made at the panel's ECP bus.
In a follow up to the previous video, I show you the general troubleshooting steps to perform when there is no signal on a Honeywell LTE-XA or LTE-XV. As these are cellular modules, an adequate cell signal is required for them to work properly. You might get a lack of cell signal due to the communicator being used too far from a cell tower, a SIM card that needs to be re-seated, or due to a SIM card that is not yet activated.
I show you how to check the ECP Address and the RIS Address on a Honeywell Home Tuxedo Keypad. Both the ECP Address and the RIS Address are found in the same menu. The Enhanced Console Protocol (ECP) Address tells the panel where to find the Tuxedo as a keypad controller. Setting the ECP is sometimes referred to as addressing the keypad. The Remote Interactive Service (RIS) Address tells Total Connect 2.0 and AlarmNet where to find the Tuxedo as an automation controller.
I show you how to pair the DSC PG9914 Motion Sensor with a Qolsys IQ Panel 2 Plus Security System. The DSC PG9914 is a PowerG Sensor, and it can be used with any version of the Qolsys IQ Panel 2 Plus. The sensor offers a coverage area of up to 39 feet, pet immunity of up to 85 pounds, a wireless communication range of up to 2,000 feet away from the IQ Panel 2 Plus, and 128-bit AES encryption.
I show you how to upgrade the Honeywell Lyric Controller to support an LTE communicator. In order to do this, you will need a compatible LTE cellular communicator. The compatible modules include the Honeywell LYRICLTE-A AT&T LTE Communicator and the Honeywell LYRICLTE-V Verizon LTE Communicator. You will need to get a monitoring plan that includes cellular connectivity, such as an Alarm Grid Gold or Platinum Level Plan. This is necessary for activating the communicator for monitoring service.