Honeywell LYRICLTE-A Posts

Posted By

Today, in this final part of our 2020 holiday buying guides, we will be checking out various accessories for the Honeywell Lyric, the Qolsys IQ Panel 2 Plus, and the 2GIG GC3e. Specifically, we will be looking at compatible cellular communicators, security cameras, keypads, and desk mounts.


Adding various accessories to your system can improve your overall experience and make your system easier to use. Most accessories are optional, though there some that are required for setting up new monitoring service. We'll be sure to discuss these factors along the way. The other very important thing to keep in mind is that compatibility is usually based on system. Check and make sure that any accessory you want works with your system.


Cellular Communicators

We'll start by looking at cellular communicators for our top alarm panels. All of our top security system picks have built-in WIFI for communicating right out of the box. But only the Qolsys IQ Panel 2 Plus comes with a built-in cellular communication module. For the Lyric and the GC3e, you must add a cellular radio if you want one of these systems to use a cellular communication pathway. Keep in mind that this is optional for Total Connect 2.0 Systems like the Lyric, as TC2 allows system to be set up with IP-only service. But for Alarm.com Systems, having an active cellular communication set up is required. This means that you must buy a cellular communicator for a 2GIG GC3e to get it monitored. Keep in mind that using cellular communication on any system will require a monitoring plan that includes cellular service, such as an Alarm Grid Gold or Platinum Level Plan.

A good thing about the cellular communicators listed here is that they are all LTE communicators. The term LTE stands for "long-term evolution", and the associated networks and cell towers are expected to be kept running and in-service for a very long time. This will remain true even as 5G networks are rolled out, as LTE is positioned to serve as a valuable and reliable backup option to 5G. At this time (December 2020), 5G communicators for alarm systems do not yet exist. This makes LTE far and away the best option for cellular communication on alarm systems at this time.

You will notice that there are no cellular communicators listed here for the IQ Panel 2 Plus. This is because the IQ Panel 2 Plus comes with a cellular communicator that is pre-installed. It cannot be removed or replaced. This means that if the entire panel must be replaced in the event that its cellular radio fails. You will also see that carrier options for AT&T and Verizon are listed here. You should simply go with whichever carrier provides better service in the area where the system will be used. You can also check coverage maps if you are unsure. Remember, this choice will have no impact on your monthly monitoring costs, and it has nothing to do with the carrier for your personal phone. And just to restate it one last time, this is required for the GC3e, and optional for the Lyric.

Here are our top picks for cellular communicators.

Model Notes
2GIG LTEA-A-GC3
AT&T LTE Communicator for 2GIG GC3e. Requires system firmware version 3.2.3 or higher.
2GIG LTEV1-A-GC3
Verizon LTE Communicator for 2GIG GC3e. Requires system firmware 3.1.3 or higher.
Honeywell LYRICLTE-A
AT&T LTE Communicator for Honeywell Lyric. Requires system firmware version MR3 or higher.
Honeywell LYRICLTE-V
Verizon LTE Communicator for Honeywell Lyric. Requires system firmware version MR9 or higher.


Security Cameras

Next, we will be taking a look at various security cameras options for your system. Broadly speaking, these devices can be split into two (2) categories. There are security cameras for Alarm.com and security cameras for Total Connect 2.0. If you are building around a Qolsys IQ Panel 2 Plus or 2GIG GC3e, then you will want to get Alarm.com Security Cameras. But if you are building around the Honeywell Lyric, then you should get Total Connect 2.0 cameras. Remember that using any camera will require a monitoring plan that includes video surveillance, such as an Alarm Grid Platinum Level Plan. The only exception is for a SkyBell Video Doorbell, which we will be discussing later.

The cameras listed here are all IP cameras, meaning that they connect to the internet for remote access. You can use the Alarm.com Mobile App or the Total Connect 2.0 Mobile App to get a live look-in for your camera from pretty much anywhere in the world. Most cameras connect across wireless WIFI, but some use wired ethernet connectivity. For those using wired ethernet, you will often see them listed as Powered over Ethernet, or PoE. This means that the camera can get both power and network connectivity from the same connection. Cameras that use WIFI will typically just have a plug-in transformer for power.

Let's start by exploring the Alarm.com Cameras. These are what you want if you are building around an IQ Panel 2 Plus, a 2GIG GC3e, or any other Alarm.com Security System.

Model Notes
Alarm.com ADC-V522IR

Alarm.com Indoor 1080p camera. 113° Field of View. IR Night Vision range of 15 feet. Uses WIFI or ethernet connectivity, but does not support PoE.
Alarm.com ADC-V523
Alarm.com Indoor 1080p camera w/ High Dynamic Range. 117° Field of View. IR Night Vision Range of 15 feet. Uses WIFI or ethernet connectivity, but does not support PoE.
Alarm.com ADC-V622- WELL

Alarm.com Indoor Wellness Camera w/ 1080p recording. 180° Field of View. IR Night Vision Rang of 15 feet. Uses WIFI or ethernet connectivity. Supports PoE if ethernet is used. Doubles as Bluetooth speaker for two-way audio.
Alarm.com ADC-V723

Alarm.com Outdoor 1080p camera w/ High Dynamic Range. 117° Field of View. IR Night Vision Range of 40 feet. Uses WIFI connectivity. Does not support wired ethernet.
Alarm.com ADC-VC726
Alarm.com Commercial outdoor mini bullet 1080p camera. 86° Field of View. IR Night Vision Range of 95 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VC736
Alarm.com Commercial outdoor large bullet 1080p camera. 86° Field of View. IR Night Vision Range of 260 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VC826
Alarm.com Commercial outdoor dome 1080p camera. 108° Field of View. IR Night Vision Range of 95 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VC836
Alarm.com Commercial outdoor turret 1080p camera. 108° Field of View. IR Night Vision Range of 95 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VDB770
Alarm.com Video Doorbell 1080p Camera. 150° Vertical Field of View. 115° Horizontal Field of View. IR Night Vision Range of 15 feet. Uses WIFI connectivity. Does not support wired ethernet.
Alarm.com ADC-SVR122
Alarm.com Stream Video Recorder. Used to facilitate 24-hour continuous recording. Supports up to 2TB of storage w/ proper hard drives. Not an actual camera.
Alarm.com ADC-CSVR126
Alarm.com Commercial Stream Video Recorder. Used to facilitate 24-hour continuous recording. Supports up to 16TB of storage w/ proper hard drives. Not an actual camera.


Next, we will be looking at the Total Connect IP Cameras. There are only thee (3) models available, but they are the ones to use if you have a Honeywell Lyric set up with the Total Connect 2.0 platform.

Model
Notes
Honeywell IPCAM-WIC1

Total Connect 2.0 Indoor 720p Camera. 135° Field of View. IR Night Vision Range of 16.5 feet.
Honeywell IPCAM-WIC2
Total Connect 2.0 Indoor 1080p Camera. 110° Field of View. IR Night Vision Range of 33 Feet.
Honeywell IPCAM-WOC1
Total Connect 2.0 Outdoor 1080p Camera. 117° Field of View. IR Night Vision Range of 65 Feet. Does not record audio.

Lastly, we want to give special recognition to the SkyBell Doorbell Cameras. These camera replace your existing doorbell, and you can receive push notifications on your phone when someone rings your doorbell. They can also begin recording upon detecting movement, making them ideal for monitoring the front of your home. What's also unique about these cameras do not require true video monitoring service. Up to five (5) can be added on a TC2 account, while those with ADC can only use one (1), unless they upgrade to a true video monitoring plan. Make sure to use one designed for TC2 or ADC depending on the interactive platform you are using. Please note that only the TC2 version can be used with the native SkyBell App. You cannot use the SkyBell App with the ADC models.

Model
Notes
Honeywell SkyBell DBCAM-TRIM
SkyBell Slimline Video Doorbell Camera for use w/ Total Connect 2.0 and SkyBell App. Up to 1080p recording quality. Uses WIFI connectivity. Available in Satin Nickel or Oil Rubbed Bronze.
Alarm.com ADC-VDB101

SkyBell Round Video Doorbell Camera for use w/ Alarm.com. Up to 1080p recording quality. Uses WIFI connectivity. Available in Satin Nickel or Oil Rubbed Bronze.
Alarm.com ADC-VDB105
SkyBell Slimline Video Doorbell Camera for use w/ Alarm.com. Up to 720p recording quality. Uses WIFI connectivity. Available in Satin Nickel or Oil Rubbed Bronze.


Alarm Keypads


Our next topic concerns alarm keypads. These devices serve as a secondary on-site controller for your system. Some of these are very basic devices that are only useful for minimal system arming and disarming. Others offer complete touchscreen displays and allow you to perform a robust selection of security and automation commands. The important thing to pay attention to here is compatibility. Each keypad listed here will only work with the system that it is intended to be used with.

Some common locations for secondary alarm system keypads are by back doors or garage doors, as a user might want to arm and disarm from those locations as they are coming and going, without needing to go all the way to their primary alarm panel. They are also popular for use in master bedrooms, as having a keypad by your bedside can be a convenient way to call for help in the event that you hear someone breaking into your home.

Here are the available keypads for our top system picks.

Model
Notes
Honeywell LKP500
LCD Keypad for Honeywell Lyric. Used for basic arming and disarming. Provides two lines of character display, with 16 characters per line. 32 characters total. Supports chime. Honeywell LKP500-DK Desk Stand is also available.
2GIG PAD1-345
Push-button Keypad for 2GIG Systems, including the 2GIG GC3e. Used for basic arming and disarming. Can also be used to trigger a panic during an emergency. No display screen. No chime or voice.
2GIG SP1-GC3
Touchscreen Keypad for 2GIG GC3e. Supports full suite of security and arming functions. Pairs w/ GC3e across WIFI or using a local Access Point (AP). Offers chime and voice. Mimics screen of GC3e once paired.
Qolsys IQ Remote
Touchscreen Keypad for Qolsys IQ Panel 2 Plus. Supports full suite of security and automation functions. Pairs with IQ2+ across WIFI. Mimics screen of IQ2+ once paired.


Desk Mounts

Our final category is desk mounts for alarm panels. Using a desk mount allows you to position your panel upright on a sturdy desk or table, instead of wall-mounting or just lying it flat. These devices are often preferred by DIY users who don't want to drill holes in the wall. They are also great for renters who have restrictions on drilling holes.

Of our top security system picks, only the Qolsys IQ Panel 2 Plus comes with a desk mount included. However, the included desk mount is relatively small and flimsy. There is actually a more robust desk mount for the IQ Panel 2 Plus, which is included on this list. Using a proper desk mount makes it possible to perform a complete system installation with nothing more than a screwdriver in many cases.

Here are desk mounts for our top security system picks.

Model
Notes
Honeywell LCP500-DK
Desk mount for Honeywell Lyric. Allows for positioning at 30° or 60°.
2GIG CP-DESK
Desk mount for 2GIG GC3e. Also compatible with other 2GIG Wireless Alarm Panels.
Qolsys IQ Stand
Desk mount for Qolsys IQ Panel 2 Plus. Sturdier option than the standard table stand that comes included with the system.


Reach out to us!

This concludes our final buying guide for the 2020 holiday season. Make sure to check out our earlier buying guides on alarm panels, security sensors, environmental sensors, smart home automation, and our special guide for the Honeywell Home PROA7PLUS Panel. If you have any questions regarding compatibility, or if you are interested in starting new alarm monitoring service and you need help planning your system, please email our team at support@alarmgrid.com. We will help you every step of the way, from ordering the right equipment, to activating your alarm monitoring service. Our team is available to help from 9am to 8pm ET M-F. As always, we look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Security, Sales, & Integration recently published an article outlining the 3G Sunset and the importance of upgrading to LTE. One question we are often asked is how long LTE networks will be kept in-service. Thanks to this informative article from SSI, we now have a pretty good estimate.


According to the information presented in the article, LTE networks are expected to have a lifespan that extends through at least the mid-2030s, if not longer. We have said many times before that LTE networks should be kept in service well into the very distant future, and now we have somewhat of a more precise timeline. It is also important to note that we understand this "mid-2030s" estimate to be on the conservative side. There is a good chance that the LTE networks might be supported even beyond that point in time. But given that we are in the year 2020, and have a "mid-2030s" estimate for the LTE lifespan, we can say that anyone who purchases an LTE communicator for their security system at this point in time should expect it to work for at least the next 15 years.

We need to stress here that this is nothing official. This is just information being published in an SSI article. This is not an official statement from a cellular service provider, and we advise taking it with a grain of salt. But given our understanding on the subject, this mid-2030s estimate strikes us as legitimate. The article also states that all 3G cellular networks will be shut down no later than December 31, 2022. This also lines up with what we have been hearing. At the time of this writing in late October 2020, we are slightly more than two (2) years away from the final end of 3G. We have said it many times before, and we will say it again. You need to upgrade to LTE as soon as possible to avoid a loss of monitoring service.

On that note, it's also fair for us to begin thinking about what lies beyond LTE. It's no secret that 5G networks are being rolled out across the country, and they will soon become the norm for cellular communication. At this time, we have not heard of any alarm manufacturer offering a 5G communicator, though we wouldn't be surprised for it to happen soon. But it's not a sure thing that a 5G communicator would be available before the end of 3G. That is why we are pushing so hard for users to make the upgrade to LTE. We don't want any of our monitored customers to be left behind in the transition. While the eventual promise of 5G might seem exciting and flashy, the important thing here is keeping your security system working and having your home or business stay protected. And from what we can tell, LTE will provide exactly that until at least the mid-2030s, possibly even beyond that.

If you are interested in getting starte with alarm monitoring service, or if you are needing to upgrade your existing system to LTE, please email us at support@alarmgrid.com. Our team is here to check email from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , , , , , ,

Comments


Posted By

Alarm Grid is back with another video recap! We've got some great new videos to help you get the very most out of your security system. As always, we hope that you find the new videos to be informative and helpful. Let's check out the newest tutorial videos from the Alarm Grid team!

Install Honeywell LTE-XA or LTE-XV On VISTA-15P, VISTA-20P, VISTA-21iP

I show you how to add a Honeywell LTE-XA or Honeywell LTE-XV to a Honeywell VISTA P-Series Alarm Panel. The LTE-XA and LTE-XV are cellular communicators used by VISTA Alarm Panels to communicate with the AlarmNet servers. Adding a communicator to a VISTA System is necessary for getting it monitored and set up with the Total Connect 2.0 platform for controlling the system remotely. The communicator will use a 4-wire connection that is made at the panel's ECP bus.


Troubleshooting No Signal issue on Resideo LTE-XA or LTE-XV

In a follow up to the previous video, I show you the general troubleshooting steps to perform when there is no signal on a Honeywell LTE-XA or LTE-XV. As these are cellular modules, an adequate cell signal is required for them to work properly. You might get a lack of cell signal due to the communicator being used too far from a cell tower, a SIM card that needs to be re-seated, or due to a SIM card that is not yet activated.


Checking the ECP and RIS Address On a Tuxedo

I show you how to check the ECP Address and the RIS Address on a Honeywell Home Tuxedo Keypad. Both the ECP Address and the RIS Address are found in the same menu. The Enhanced Console Protocol (ECP) Address tells the panel where to find the Tuxedo as a keypad controller. Setting the ECP is sometimes referred to as addressing the keypad. The Remote Interactive Service (RIS) Address tells Total Connect 2.0 and AlarmNet where to find the Tuxedo as an automation controller.


Enrolling the DSC PG9914 Motion Sensor to a Qolsys IQ Panel 2 Plus

I show you how to pair the DSC PG9914 Motion Sensor with a Qolsys IQ Panel 2 Plus Security System. The DSC PG9914 is a PowerG Sensor, and it can be used with any version of the Qolsys IQ Panel 2 Plus. The sensor offers a coverage area of up to 39 feet, pet immunity of up to 85 pounds, a wireless communication range of up to 2,000 feet away from the IQ Panel 2 Plus, and 128-bit AES encryption.


Upgrading a Honeywell Lyric to Use LTE

I show you how to upgrade the Honeywell Lyric Controller to support an LTE communicator. In order to do this, you will need a compatible LTE cellular communicator. The compatible modules include the Honeywell LYRICLTE-A AT&T LTE Communicator and the Honeywell LYRICLTE-V Verizon LTE Communicator. You will need to get a monitoring plan that includes cellular connectivity, such as an Alarm Grid Gold or Platinum Level Plan. This is necessary for activating the communicator for monitoring service.

Tags: , , , , , , , , , , ,

Comments


Posted By

Alarm Grid noticed a new addition to the AlarmNet360 platform for alarm dealers. There is now a banner counting down to the end of the respective AT&T 3G and Verizon CDMA network shut downs. It's another indication that the 3G Sunset is indeed a very pressing matter in the alarm industry.


If you are not familiar with the 3G/CDMA Sunset, it refers to quickly approaching dates at which the AT&T 3G Cellular Network and the Verizon CDMA Network will be permanently shut down and deactivated. Other cellular service providers also have their own dates for when they will decommission their older networks in favor of faster and more reliable LTE and 5G cellular networks. But for the alarm industry in the United States, the AT&T and Verizon shutdowns are particularly important, as many alarm systems rely on communication through these networks.

According to the banner shown on AlarmNet360, the AT&T 3G Sunset is set to occur after January 31, 2022. Likewise, the Verizon CDMA Sunset, according to the banner, will occur after December 31, 2022. We want to make it very clear that Alarm Grid is NOT stating that these are "official" dates for the respective network shutdowns. This is just what AlarmNet is displaying on their dealer portal. But it is our understanding that these dates are accurate and very important for end users to consider.

When a cellular network is shut down, any device communicating across that network will stop working. This includes many cellular alarm monitoring communicators that security systems depend upon for providing trustworthy and effective monitoring service. Inevitably, there will be many homes and businesses that fail to make the proper transition and get left behind during this period of adjustment. Our goal is to ensure that this happens to as few Alarm Grid customers as possible.

In preparation for the 3G/CDMA Sunset, AlarmNet has stopped allowing activations for these older cellular modules. Similar measures have also been taken by Alarm.com. But just because new activations are no longer permitted does not change the fact that there are many existing communicators out there.

Alarm Grid has promised to continue providing support for these modules as long as possible. We know that there are many people who aren't necessarily in a position to purchase a new communicator and/or an entirely new alarm panel right away. We're doing our best to accommodate everyone. But once an associated cellular network is shut down, there is nothing we can do. This is completely in the hands of the cellular service providers, and it is entirely out of our control. We fully understand the need to decommission older networks in favor of better technology, and we know that cellular service providers are making these decisions in the best interest of everyone involved. But we need to urge our customers. Do not get left behind.

The 3G/CDMA Sunset is not something to take lightly. There will be some homes and business that do not get the memo and/or decide to not take any action. They will be left vulnerable and unprotected. That is an unfortunate reality of the situation. But you do not need to let that happen to you or those around you. Most systems will allow you to replace an existing 3G or CDMA Communicator with a newer LTE communicator.

The term LTE stands for "Long-Term Evolution". Cellular service providers like AT&T and Verizon are planning to keep their LTE networks active and in-service for many, many years into the future, possibly even decades. The LTE networks will serve as a reliable backup for the new 5G networks, for which the infrastructure is still being rolled-out. Even as cellular technology continues to evolve and change, the LTE networks will remain as a stronghold, keeping millions of security systems monitored and protected. Cellular service providers will not let their LTE infrastructure go to waste. These networks will be there for your home or business when you need them the most.

If you haven't upgraded to LTE yet, please contact us. We will help you explore your options so that you can make an informed decision. Depending on your current equipment, you might only need to buy a new communicator. Others will need to replace entire alarm panels. Our technicians can provide more detail once we know exactly what you are working with. We understand that it might be difficult or impossible for you to purchase new alarm system equipment right now. That's fine. You still have time. But time is running out. You need to start preparing and thinking about these things now. That's why AlarmNet has slapped a giant banner marking the countdown dates. Take action now, if possible, so that you aren't racing to make an upgrade at the last minute.

For Alarm Grid customers it is important to note that, in most cases a communicator replacement will require that you work with one of our trained technicians. In some cases, this can be done without an appointment, but in many cases an appointment will be required. So please, also keep this in mind when you're planning to upgrade your equipment. If everyone who needs an upgrade waits until the last minute, the wait for an available appointment time may get longer than usual.

The best way to contact us regarding any questions or concerns you might have about the 3G/CDMA Sunset is to email support@alarmgrid.com. Please let us know about the security system equipment you currently have so that we can provide the most comprehensive and complete support possible. We may even ask for pictures of your panel and/or communicator so that we can help you to the best of our ability. Remember that our support hours for checking email run from 9am to 8pm ET M-F. We look forward to hearing from you and ensuring that your security system is kept monitored for many years to come!

Tags: , , , , , , , , , , , , , , , , ,

Comments


Posted By

We're here once again to remind you to upgrade the old 3G or CDMA cellular communicator for your alarm system to an LTE communicator! Once the associated cellular network is shut down, the old communicator will no longer work in any manner. This could leave your home or business vulnerable!

Honeywell lte l57v verizon lte cellular communicator for l5200 l

Security systems use internet and/or cellular communication to send out signals to central monitoring stations and/or interactive monitoring platforms like Total Connect 2.0 and Alarm.com. This is the very core principle of alarm monitoring. And if the associated communication network is shut down or fails, then alarm monitoring will become impossible.

Just like your phone, tablet, or computer, your alarm system cannot just magically send out signals. It needs equipment to accomplish this task. That equipment comes in the form of an alarm monitoring communicator. This is a piece of hardware either inside, or located nearby your alarm panel, much like what you would find inside of another electronic device that needs to communicate out and also receive incoming signals.

In the world of cellular communications, you have likely heard about the new 5G networks. These 5G networks represent the latest and greatest cellular technology available, and they are certainly going to change the game when it comes to mobile communication. But while service providers are working to develop new 5G infrastructure, they are also phasing out older technology. This includes the AT&T 3G Network and the Verizon CDMA Network.

If you have a system with a cellular communicator that works across a 3G network, such as the aforementioned AT&T 3G and Verizon CDMA Networks, then time is running out for you to upgrade. While we cannot provide an exact date of shut down, we can confirm that it is due to occur sometime in 2022.

Now, you might be thinking, "Well gee, 2022 is a long way away. I'll just wait until then." And really, we can't force you to upgrade now. We have already promised to continue supporting older communicators for as long as possible. But if you have the means to buy a new cellular communicator and keep your existing system running, then we urge you, as professionals, to make the jump sooner rather than later.

Time is moving quickly, and we can all but guarantee you that some people will not get the memo, and they will get left behind. We understand. For many people, a security system is not something that is on their minds regularly. Historically, this has been a piece of hardware that you hide away somewhere, while only interacting with a wired keypad. But don't take this deadline lightly. Make the jump sooner rather than later, and save yourself the trouble.

We are also often asked by people upgrading from 3G or CDMA which type of communicator they should get. The answer to that is an LTE communicator. LTE is the direct successor to 3G and CDMA. If you have heard the term "4G LTE", that's where LTE comes from. There have been LTE communicators available for security systems for a few years now. They work great, and they can keep a system monitored well into the very distant future.

You might be wondering why we aren't recommending a 5G alarm monitoring communicator. The truth is that 5G technology is still so new that there aren't really any 5G communicators available quite yet. We are sure that we will have some 5G communicators available to sell and promote in the near future. But for right now, LTE is the best available. And since LTE already provides fast speeds, there really won't be much difference for a security system.

Another common concern we encounter is that end users are fearful that LTE will also one day become obsolete. Our response to this concern is that LTE will most likely remain active and in place for many, many years, even decades into the future. The term LTE itself even stands for "Long Term Evolution". Cellular service providers envision 5G as the primary network of the future, with LTE infrastructure being kept in service as a reliable backup.

It's important to understand that building a new nationwide cellular network is not cheap. Every cellular service provider is spending billions to build the necessary infrastructure. To them, this is not a joke or a game. The 5G networks are being built to last. They enable the remarkably fast speeds needed to support future technology. The idea here is that they are spending huge amounts of money now so that they do not need to build new networks later.

And while 5G cellular networks are the technology of the future, the current LTE networks are also not going anywhere anytime soon. Why? They are designed to serve as backup options once 5G is fully in place. This is much like the current 3G and CDMA networks. They are a backup to the current LTE networks. If you have ever noticed that your LTE phone is also capable of using 3G, that is why. It's in case LTE is ever unavailable for some reason.

The difference with 5G is that, once in place, it is going to be the premier option for a very, very long time. The very idea of a supposed "6G network" isn't really even fathomable at the moment. We're likely talking decades from now. What you can expect in the near future is that 5G will become the primary technology, while LTE will be kept in-service as a backup.

And again, we hear some more cries from people, "Well, I'll just wait for a 5G communicator to come out." The truth is that with alarm systems, the difference between LTE and 5G really won't matter all that much. Security systems do not transmit large amounts of data. Yes, 5G might make some automation commands a hair faster. But LTE can already handle this quite well. And it's very possible that 5G communicators might not be ready before the 3G sunset.

Long story short, you should upgrade to LTE as soon as you can if you intend on using cellular communication with your security system. Remember that cellular service is much more reliable than WIFI connectivity. Even in the year 2020, internet outages are relatively common. They likely always will be. That is why users are willing to pay a premium for cellular monitoring service. Cellular all but ensures your system will always stay connected.

While your 3G or CDMA communicator might be working great right now (as it always has been), you will wake up one day (in 2022) only to find a scary "Comm Fail" message with no quick solution. And if you are cell-only, your panel will be offline, and your home or business will be vulnerable. Don't let that happen. Just make the jump to LTE as soon as you can.

Alarm Grid offers LTE cellular communicators for many types of alarm systems. We can help you get exactly what you need so your transition is as seamless as possible. As of this writing, there won't be any increase in your monthly bill. You will pay exactly the same monthly fee for cellular monitoring service using a new LTE communicator as what you pay with a 3G or CDMA communicator now. You only need to buy the new LTE module. That's it.

And if you're worried about needing to install your new LTE communicator, fear not! These devices are super easy to install. And if you're monitored by Alarm Grid, we will be more than happy to help you through the installation process. That's our job. Every day, we encounter new and inexperienced users and help them monitor their homes and businesses. And that includes keeping existing systems running. We love what we do, and we're happy to help.

Maybe you aren't sure which LTE communicator you need for your system? Hey, we totally understand! It's not like you're completely obsessed with this stuff (like we are). Just shoot us an email with a picture of your panel, and we can help you explore your options. If you can get us a picture of the panel's inside with its current communicator, then that's even better!

Like always, the best email to reach us is support@alarmgrid.com. We'd love to hear from you, whether you're an existing Alarm Grid customer, or if you're looking for the very best in DIY security. Maybe you would prefer to talk on the phone? That's cool too. Our number is (888) 818-7728, and we happily answer phones from 9am to 8pm ET Monday thru Friday.

Our goal is to make the 3G and CDMA sunset as easy and as seamless for our customers (and future customers) as possible. The time to take action is now. We can help you get what you need so that you and the people around you stay safe and protected. The 3G sunset is serious, and we don't want you to get left behind. Please, upgrade now. We are grateful to have you as a member of the Alarm Grid family, and we look forward to hearing from you.

Tags: , , , , , , , , , , , , , , , ,

Comments


Posted By

Alarm Grid would like to remind all of its monitored customers who receive cellular alarm monitoring service to upgrade to an LTE communicator as soon as possible. Older 3G cellular communicators will no longer function once their associated cellular networks are shut down in 2022.

Honeywell lyric lte a at and t lte cellular communicator for the

Without going too in-depth, an alarm panel uses a cellular communicator to send the necessary signals for alarm monitoring service to take place. When doing this, the communicator will send and receive signals across the same cellular networks that are used by mobile phones and other devices that utilize cellular communication technology.

Cellular communication is widely recognized as being the optimal communication path for security systems due to its exceptional reliability and generally fast speeds. Additionally, the Alarm.com platform requires that all systems using their service have a cellular communicator that is registered and activated. This differs from Total Connect 2.0, where a user can forgo a cellular communicator and strictly use an IP communicator with their system.

If you read this blog regularly, then you will likely have heard us discussing the 3G Sunset. This refers to the ongoing process of shutting down 3G cellular networks in favor of newer and more powerful LTE networks and 5G networks. Both Alarm.com and Total Connect 2.0 have stopped allowing 3G activations. A user who has a security system with a 3G communicator that is already activate can continue to use their communicator until the associated network is shut down. Once that happens, the communicator will no longer work for monitoring service.

Alarm.com and Total Connect 2.0 do not control the cellular networks, and it is not their decision when these networks are shut down. That decision falls on the cellular service providers. AT&T has stated that their 3G network is due to shut down by the end of February 2022. The Verizon CDMA Network (their 3G equivalent) is expected to be shut down in 2022 as well.

Alarm Grid urges everyone using a 3G communicator for monitoring service to upgrade to an LTE communicator as soon as they can. While 2022 might seem like a long time away, time is ticking by. Do not leave your home or business unmonitored and vulnerable. Upgrade to LTE now, and save yourself the hassle later on.

One concern that we have heard from some users is that LTE networks will also become outdated someday, and they will eventually be shut down as well. But AT&T and Verizon have both gone on record to say that their LTE networks will be supported and maintained well into the very distant future. This might seem surprising, especially considering that 5G is regularly mentioned in their advertisements. The reality though is that cellular service providers still intend on maintaining their LTE infrastructure for use as a backup to their 5G networks. Remember, even new and upcoming smartphones that utilize 5G technology are still designed to connect with LTE networks whenever 5G service is unavailable for whatever reason.

For more proof that LTE is here to stay, you do not need to look any further than the name itself. The term "LTE" is actually short for "Long-Term Evolution". Cellular service providers built their LTE networks with the intention that they would remain active and in service for many decades. They are not going anywhere any time soon, even as the excitement and anticipation of 5G continues to grow. And if that weren't enough, using 5G communication with a security system will not really be all that different than LTE. Alarm systems do not need to send large amounts of data, and LTE is more than capable of providing fast and reliable data transmissions as needed.

Alarm Grid has released many panel-specific guides to upgrading to LTE that we have linked below. You may notice that one noticeable absence from the list is the Qolsys IQ Panel 2 and IQ Panel 2 Plus. These systems already come with built-in LTE communicators, so no upgrade is necessary. Please check out our LTE upgrade guides linked below:

Remember that if you have any questions about the 3G sunset or upgrading to LTE, you can email us at support@alarmgrid.com. We will be happy to discuss your options for keeping your existing system monitored. Our team checks email from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , ,

Comments


Posted By

Resideo is currently in the process of pushing automatic OTA firmware updates to all active AT&T LTE Communicators. The updating process is ongoing, and we are not sure how long it will last. You should not notice any changes to your monitoring service or your Total Connect 2.0 account.

Honeywell lyric lte a at and t lte cellular communicator for the

If you recall a few months ago, we announced that Resideo was pushing down automatic over-the-air (OTA) firmware updates to LTE communicators. Resideo started with the Verizon LTE Communicators, and now they are updating the AT&T LTE Communicators. This is a very similar update with no major differences.

Just like before, Resideo is expected to perform this update cycle in batches. Units that were registered first will have the update performed first. This will continue in sequential order until all active Resideo AT&T LTE Communicators have been updated. Any new AT&T LTE Communicator activated during this time will be placed at the end of the queue. If an update fails, that communicator will be pushed to the next batch to try again.

Remember, the communicator must be active and connected with the AlarmNet360 Servers in order for the update to go through. Any communicator that is not active will not be able to receive the update. This includes any communicator installed inside a panel that is currently powered off. Try and keep your panel powered on at all times to ensure that the update can go through successfully.

The following Resideo Communicators are affected by this update:

It is possible that your panel may reboot as part of the updating process. However, you should not notice any other changes. Additionally, the following Contact ID messages may be generated during the process:

Contact ID
Description
E365 Cell Software Update Start
R365 Cell Software Update Finish
E966 Cell Software Update Failed
E903 Code Update Start
R903 Code Update Finished
E904 Code Update Failed
E339 Power On Reset

If you have any questions regarding this update, please do not hesitate to email us at support@alarmgrid.com. Remember that our support hours are from 9am to 8pm ET M-F. We look forward to hearing from you and answering your questions!

Tags: , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We have a simple tip today that will be helpful for anyone looking to buy a new home security system. That tip is that the cellular communicator used with your panel is different than the one used with your phone. This is very important to keep in mind when buying a system.

Honeywell lyricpk lte a wireless security system w slash at and

As you probably know, cellular communication is not the only communication path available for security systems. There are also internet (IP) communicators and even traditional telephone dialers. But cellular communication is by far the most reliable. Unlike other communication paths, cellular service almost never goes down or becomes unavailable. Modern cellular communication has also improved tremendously through the years, and it is now nearly as fast as IP communication. For that reason, we recommend that everyone uses cellular communication with their alarm systems.

You may be surprised to learn that many people think they have to get a cellular communicator for their alarm system that uses the same service provider as their cell phone. That is false. You can certainly use a different service provider with your security system than what you use with your phone. There is nothing wrong with using the same service provider, but this is by no means required.

Your phone and your alarm system are completely separate devices. They are not related in any way. They have separate billing cycles, and the service for one will not affect the other. Of course, you may receive text alerts regarding system activity. And if you have a system like the Qolsys IQ Panel 2 Plus, you may use Bluetooth disarming with your phone. But the fact remains that your system and your smartphone are totally separate.

Qolsys iq panel 2 plus at and t lte with powerg s line and legac

The reason we bring this up is because we have customers all the time who think that they must have the same service provider for their phone as they do their alarm system. They don't. This is a complete fallacy. Your service provider for your phone should have very little impact on which service provider you choose for your system. For example, if you have an AT&T Phone, then there's nothing wrong with choosing a Verizon Communicator for your system, or vice-versa.

Now, there's nothing wrong with considering how the service for your smartphone fares in your home when you are choosing service for your alarm system. For instance, if you think, "Gee, I have an AT&T Phone, and my service works excellent while I am at home!", then by all means, go with an AT&T Communicator for your system. It's just important to understand that this isn't mandatory.

You should also understand that a cell phone and an alarm panel using cellular communication operate in a very similar manner. Both will send out signals across a cellular network. Both have a SIM Card. The only difference is that one communicator is inside a phone, while the other is inside an alarm panel. If you have a phone with a service provider that provides strong service in your home, then it's fair to expect that the same cellular network can also provide strong service for your alarm system.

But if you find that your phone does not receive strong cellular signal strength while you are at home, then please, choose a different service provider for your alarm system! With your phone, you might sacrifice signal strength at home because the network provides better signal strength while you are at work or while you are in town. But your alarm system isn't going anywhere. You should choose your alarm system's cellular service provider based solely on how it performs at the location where it is used.

You should also realize that the costs for cellular alarm monitoring will remain the same, regardless of which service provider you choose. This is different for your phone, where you may shop around for different rates. For an alarm system it's a little bit different. You do not pay the cellular service provider directly. Instead, you pay your alarm monitoring company all the fees for your monitoring service. Your monitoring company will then handle any of the fees for cellular service. No matter which cellular provider you go with, your monthly cost will remain the same. It is the same cost for AT&T, Verizon, or any other cellular service provider you might use.

Cost and the service provider for your phone should not be factors when choosing a cellular service provider for your alarm system. The only factor you should consider is how well that service provider fares in the location of the system. You should check coverage maps and select the service provider that works best in that area. Whether that service provider is the same as the one you use for your phone should not make any difference.

2gig ltev1 a gc2 alarm dot com verizon lte cellular communicator

Remember, to use any cellular communicator, you will need a monitoring plan that includes cellular service. We recommend choosing one of our Gold or Platinum Level Plans so that you can take full advantage of the great features that Alarm.com and Total Connect 2.0 have to offer. More information about these plans is available on our alarm monitoring page. If you don't need the convenience of interactive monitoring and smart home automation, we also offer a Cellular-Only Plan that is less expensive and doesn't include access to Alarm.com or Total Connect 2. This plan is perfect for users who want reliable central station monitoring service, and nothing more.

If you have any questions about cellular communicators or alarm monitoring in general, we encourage you to reach out to us. Our planning department is here to help any potential customer make the best decisions for their needs. The best way to reach us is to email support@alarmgrid.com. We will check your email at our earliest convenience and respond back as soon as possible. You may also call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. We look forward to hearing from you and helping you with all your home security needs.

Tags: , , , , , , ,

Comments


Posted By

After much anticipation, Resideo has finally released the Honeywell LYRICLTE-V Verizon LTE Communicator for their flagship Lyric Security System. This now gives Lyric users a choice between two fantastic cellular coverage options in the AT&T LTE Network and the Verizon LTE Network.

Honeywell lyric controller encrypted wireless security system

For anyone who doesn't know, an alarm monitoring communicator is a very important accessory for an alarm system. This is the device that allows the panel to send and receive the signals that are necessary for alarm monitoring and remote smart home control. The Resideo Lyric Controller comes with a built-in WIFI card for this purpose. But you can also add a cellular communicator to serve as a backup communication path in case the internet ever goes down or becomes unavailable.

Previously, Lyric System users were restricted to the Honeywell LYRICLTE-A AT&T LTE Communicator for cellular backup. This presented a problem for Lyric System users in areas not covered by the AT&T LTE Network. These users were forced to forgo the ever-important cellular backup for their systems. The Honeywell LYRICLTE-V Verizon LTE Communicator finally provides a much-needed answer for these users.

It is also important to pay special mention to the Verizon LTE Network itself. LTE stands for "Long-Term Evolution". Cellular service providers like Verizon have been working hard to establish robust and powerful infrastructure for their LTE Networks over the past several years. These networks are not going away any time soon. The LTE networks represent both the present and the future for cellular communication.

By choosing an LTE communicator like the LYRICLTE-V, you are ensuring that your Lyric System can remain monitored for many years to come. Even as Resideo prepares to release the upcoming Resideo PROA7PLUS Wireless Security System, your Lyric Alarm System will still be supported. It will continue to work great for alarm monitoring and for smart home automation. The importance of the Honeywell LYRICLTE-V is that it is providing a long-term solution for your panel. This is more than just a communicator. This is a long-term investment to keep your Lyric Controller monitored well into the very distant future.

The LYRICLTE-V module is super easy to install. The process can be completed by any end user. First put the system into its cellular installation mode. You can do this by starting from the main screen and choosing Security > Tools > enter Master Code (default 1234, but usually changed) > Advanced > Install Cellular Module > Yes. Then just follow the onscreen instructions by pushing up on the right-side cover for the panel to reveal the cellular communicator slot. Insert the LYRICLTE-V, and reapply the side cover. Indicate on the Lyric Screen that you have installed the communicator, and the system will complete the process. You will then be able to activate the communicator for monitoring service. Be sure you have a monitoring plan that includes cellular communication before adding the module.

Honeywell lyric lte a at and t lte cellular communicator for the

With its new cell card, your Lyric System will now be capable of utilizing dual-path communication. This means that it will be able to send and receive signals across IP and cellular. IP communication normally serves as the primary communication path, as it is usually faster than cellular. But having that cellular backup is crucial for ensuring that your system always stays monitored and connected. As long as one path is available, your Lyric System will be able to perform all of the functions necessary for alarm monitoring. This includes staying connected with the AlarmNet Servers and Total Connect 2.0.

In order to support the LYRICLTE-V Verizon LTE Communicator, your Lyric System must be running Firmware Update MR9 or higher. As of summer 2019, this is the latest firmware release for the Lyric System. To upgrade the firmware, your Lyric System will need to be connected with the AlarmNet Servers. Since you won't be able to use the cellular communicator until you have MR9, you will need to use a WIFI connection to complete the upgrade.

Keep in mind that if you don't have WIFI access in your primary location, you can bring your Lyric Panel to a different location with WIFI access just for the sake of the upgrade. Then install and activate the LYRICLTE-V, and use a cellular-only path in your primary location. We know that many users don't have WIFI access in their homes. This work-around is perfect for these users, as they can get their systems on the necessary firmware and then use the communication path that works best for their situation. For more information on the MR9 Firmware Update, we strongly recommend reviewing this very recent blog post from Alarm Grid.

Finally, you will need an alarm monitoring plan that includes cellular communication if you want to take advantage of all the benefits that this communicator has to offer. Alarm Grid customers will want to choose a Gold Level monitoring plan or higher to unlock the full potential of the module. This will allow you to activate the communicator with Alarm Grid and provide you with access to the Total Connect 2.0 platform for remote security and smart home functionality. More information is available on our alarm monitoring page.

If you are not interested in Total Connect 2.0, we also offer a Cellular-Only Plan that will provide standard central station monitoring service and connectivity through cellular or cellular and IP. While we strongly recommend taking advantage of all the great features and remote access capabilities of Total Connect 2.0, we understand that some users may just want to keep things simple with non-interactive monitoring service. This Cellular-Only Plan is certainly an option if you want to activate a LYRICLTE-V module for no-frills alarm monitoring.

We are proud to say that the Honeywell LYRICLTE-V Verizon LTE Communicator is now available for purchase on our site. This is the communicator recommended for any Lyric user who finds that Verizon service works best in their area. If you have better coverage from AT&T, the Honeywell LYRICLTE-A AT&T LTE Communicator is still available. Remember, this has nothing to do with your standard cellular service provider. Your alarm system is completely separate from your smartphone. You can have an AT&T Phone and a Verizon Communicator for your alarm system. You should just pick whichever service works best in your area.

If you have any questions about the Lyric Alarm System, the new LYRICLTE-V Verizon LTE Cellular Communicator, or about alarm monitoring in general, please reach out to us. The best way to contact us is to email support@alarmgrid.com. We check our email super regularly, and we make sure to reply to any inquiry as soon as possible. You also have the option of calling us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. We look forward to hearing from you and answering all your important questions.

Tags: , , , , , , , , , , , ,

Comments


Posted By

Resideo has announced that the Lyric Gateway System has been discontinued, effective immediately. You can no longer purchase the Gateway from the Alarm Grid website. Fortunately, the vastly superior Lyric Controller is still available for purchase if you decide to go with a Resideo System.

Honeywell lyric gateway encrypted wireless security system

The Lyric Gateway was a unique system. It offered no option for end user programming. Instead, all programming had to be done remotely by an alarm monitoring company. This did not fit the DIY model of Alarm Grid. As a DIY monitoring company, we try to empower our customers by encouraging them to complete their own programming and learn how their systems work. Because of this, the Lyric Gateway was never a good product for us. We carried it to offer as many options for our customers as possible.

There are a few Alarm Grid customers with active Lyric Gateway Security Systems. We want them to rest assured that we will continue to support their panels for as long as we can. The Gateway System even has an AT&T LTE Communicator available, the Honeywell LYRICLTE-A. Installing and activating this communicator will ensure that a Gateway System can remain monitored for many years to come. Please note that the upcoming Verizon LTE Communicator for the Lyric will not work with the Gateway.

If you are looking for a new Resideo Security System, the Lyric Controller is still the recommended option. This panel is actively being supported with new add-on releases and new firmware updates. This is evidenced by the upcoming Verizon LTE Communicator and the MR9 Firmware Update to support this new module. Even with the new Resideo ProSeries System eventually coming to the market, we expect Resideo to maintain active support for the Lyric and their existing LYNX Touch Systems for a long time. For more information on the MR9 Firmware update, please click here.

If you have any questions about the discontinuation of the Lyric Gateway, please reach out to us at support@alarmgrid.com. We look forward to hearing from you.

Tags: , , , , ,

Comments