Honeywell LTE-XV Posts

Posted By

We're here once again to remind you to upgrade the old 3G or CDMA cellular communicator for your alarm system to an LTE communicator! Once the associated cellular network is shut down, the old communicator will no longer work in any manner. This could leave your home or business vulnerable!

Honeywell lte l57v verizon lte cellular communicator for l5200 l

Security systems use internet and/or cellular communication to send out signals to central monitoring stations and/or interactive monitoring platforms like Total Connect 2.0 and Alarm.com. This is the very core principle of alarm monitoring. And if the associated communication network is shut down or fails, then alarm monitoring will become impossible.

Just like your phone, tablet, or computer, your alarm system cannot just magically send out signals. It needs equipment to accomplish this task. That equipment comes in the form of an alarm monitoring communicator. This is a piece of hardware either inside, or located nearby your alarm panel, much like what you would find inside of another electronic device that needs to communicate out and also receive incoming signals.

In the world of cellular communications, you have likely heard about the new 5G networks. These 5G networks represent the latest and greatest cellular technology available, and they are certainly going to change the game when it comes to mobile communication. But while service providers are working to develop new 5G infrastructure, they are also phasing out older technology. This includes the AT&T 3G Network and the Verizon CDMA Network.

If you have a system with a cellular communicator that works across a 3G network, such as the aforementioned AT&T 3G and Verizon CDMA Networks, then time is running out for you to upgrade. While we cannot provide an exact date of shut down, we can confirm that it is due to occur sometime in 2022.

Now, you might be thinking, "Well gee, 2022 is a long way away. I'll just wait until then." And really, we can't force you to upgrade now. We have already promised to continue supporting older communicators for as long as possible. But if you have the means to buy a new cellular communicator and keep your existing system running, then we urge you, as professionals, to make the jump sooner rather than later.

Time is moving quickly, and we can all but guarantee you that some people will not get the memo, and they will get left behind. We understand. For many people, a security system is not something that is on their minds regularly. Historically, this has been a piece of hardware that you hide away somewhere, while only interacting with a wired keypad. But don't take this deadline lightly. Make the jump sooner rather than later, and save yourself the trouble.

We are also often asked by people upgrading from 3G or CDMA which type of communicator they should get. The answer to that is an LTE communicator. LTE is the direct successor to 3G and CDMA. If you have heard the term "4G LTE", that's where LTE comes from. There have been LTE communicators available for security systems for a few years now. They work great, and they can keep a system monitored well into the very distant future.

You might be wondering why we aren't recommending a 5G alarm monitoring communicator. The truth is that 5G technology is still so new that there aren't really any 5G communicators available quite yet. We are sure that we will have some 5G communicators available to sell and promote in the near future. But for right now, LTE is the best available. And since LTE already provides fast speeds, there really won't be much difference for a security system.

Another common concern we encounter is that end users are fearful that LTE will also one day become obsolete. Our response to this concern is that LTE will most likely remain active and in place for many, many years, even decades into the future. The term LTE itself even stands for "Long Term Evolution". Cellular service providers envision 5G as the primary network of the future, with LTE infrastructure being kept in service as a reliable backup.

It's important to understand that building a new nationwide cellular network is not cheap. Every cellular service provider is spending billions to build the necessary infrastructure. To them, this is not a joke or a game. The 5G networks are being built to last. They enable the remarkably fast speeds needed to support future technology. The idea here is that they are spending huge amounts of money now so that they do not need to build new networks later.

And while 5G cellular networks are the technology of the future, the current LTE networks are also not going anywhere anytime soon. Why? They are designed to serve as backup options once 5G is fully in place. This is much like the current 3G and CDMA networks. They are a backup to the current LTE networks. If you have ever noticed that your LTE phone is also capable of using 3G, that is why. It's in case LTE is ever unavailable for some reason.

The difference with 5G is that, once in place, it is going to be the premier option for a very, very long time. The very idea of a supposed "6G network" isn't really even fathomable at the moment. We're likely talking decades from now. What you can expect in the near future is that 5G will become the primary technology, while LTE will be kept in-service as a backup.

And again, we hear some more cries from people, "Well, I'll just wait for a 5G communicator to come out." The truth is that with alarm systems, the difference between LTE and 5G really won't matter all that much. Security systems do not transmit large amounts of data. Yes, 5G might make some automation commands a hair faster. But LTE can already handle this quite well. And it's very possible that 5G communicators might not be ready before the 3G sunset.

Long story short, you should upgrade to LTE as soon as you can if you intend on using cellular communication with your security system. Remember that cellular service is much more reliable than WIFI connectivity. Even in the year 2020, internet outages are relatively common. They likely always will be. That is why users are willing to pay a premium for cellular monitoring service. Cellular all but ensures your system will always stay connected.

While your 3G or CDMA communicator might be working great right now (as it always has been), you will wake up one day (in 2022) only to find a scary "Comm Fail" message with no quick solution. And if you are cell-only, your panel will be offline, and your home or business will be vulnerable. Don't let that happen. Just make the jump to LTE as soon as you can.

Alarm Grid offers LTE cellular communicators for many types of alarm systems. We can help you get exactly what you need so your transition is as seamless as possible. As of this writing, there won't be any increase in your monthly bill. You will pay exactly the same monthly fee for cellular monitoring service using a new LTE communicator as what you pay with a 3G or CDMA communicator now. You only need to buy the new LTE module. That's it.

And if you're worried about needing to install your new LTE communicator, fear not! These devices are super easy to install. And if you're monitored by Alarm Grid, we will be more than happy to help you through the installation process. That's our job. Every day, we encounter new and inexperienced users and help them monitor their homes and businesses. And that includes keeping existing systems running. We love what we do, and we're happy to help.

Maybe you aren't sure which LTE communicator you need for your system? Hey, we totally understand! It's not like you're completely obsessed with this stuff (like we are). Just shoot us an email with a picture of your panel, and we can help you explore your options. If you can get us a picture of the panel's inside with its current communicator, then that's even better!

Like always, the best email to reach us is support@alarmgrid.com. We'd love to hear from you, whether you're an existing Alarm Grid customer, or if you're looking for the very best in DIY security. Maybe you would prefer to talk on the phone? That's cool too. Our number is (888) 818-7728, and we happily answer phones from 9am to 8pm ET Monday thru Friday.

Our goal is to make the 3G and CDMA sunset as easy and as seamless for our customers (and future customers) as possible. The time to take action is now. We can help you get what you need so that you and the people around you stay safe and protected. The 3G sunset is serious, and we don't want you to get left behind. Please, upgrade now. We are grateful to have you as a member of the Alarm Grid family, and we look forward to hearing from you.

Tags: , , , , , , , , , , , , , , , ,

Comments


Posted By

Resideo has discovered that certain Honeywell LTE-XV and Honeywell LTE-L3V Communicators have a firmware issue that makes them unable to appear in AlarmNet360. The affected communicators can still process signals and report to the central station. But these affected units must be replaced.

Honeywell lte xv alarmnet verizon lte cellular communicator

The Honeywell LTE-XV is a Verizon LTE Communicator for Honeywell VISTA Systems, while the Honeywell LTE-L3V is a Verizon LTE Communicator for Honeywell L3000 Systems. Only certain LTE-XV and LTE-L3V units are affected. The affected units will have a date code ranging from C305 to C365 or from D001 to D023. Modules outside of those listed dates are unaffected.

If you need to locate the date code for your LTE-XV or LTE-L3V, then it is very easy to find. You can locate the code on the inside of the module itself on the lower-left corner of the MAC sticker. Remember, date codes from C305 to C365 and from D001 to D023 may be affected. These date codes are associated with manufacture dates from November 2019 through January 2020.

Additionally, not all units within the aforementioned date codes are affected. If the communicator has a blue dot on the module or on the product packaging, then it is not affected. The images below show units with blue dots on the packaging, meaning they are not affected by the issue.


Keep in mind that these blue dots will also appear on the communicators themselves. Any communicator with a blue dot is unaffected and does not need to be replaced. Remember, this issue only affects LTE-XV and LTE-L3V units. Other AlarmNet Communicators are not affected.

If you have a Honeywell LTE-XV or Honeywell LTE-L3V without a blue dot on the packaging or on the module itself, check for the listed date code to see if your module is affected. More information on this issue can be found in this document provided from Resideo.

If you believe that you have an affected communicator, or if you need help locating the date code for the module, please contact us at support@alarmgrid.com. We operate support hours from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , ,

Comments


Posted By

Resideo will be pushing down an over-the-air (OTA) firmware update for all AlarmNet LTE Communicators later this month. This update will go through automatically, and it should not affect your monitoring service in any fashion. The update will be applied sometime later this month.

Honeywell lte xv alarmnet verizon lte cellular communicator

This update only affects the communicator, not the panel itself. The updates will be applied automatically in batches until it has been applied to every Resideo LTE Communicator. First the Verizon LTE Radios will be updated, followed by the AT&T LTE Radios. Resideo will start each update cycle with batches of units that were registered first. The company will follow a sequential order, finishing with batches of units that were registered last. Any new unit that is activated will be placed at the end of the cycle.

It is possible that your system may reboot as part of this update process. However, it should resume normal operation after the update is complete. Additionally, you may notice the following contact ID codes in your Event Log on Total Connect 2.0:

Contact ID
Meaning
E365 Update Started
R365 Update Finished
E366 Update Failed

Resideo says that this update will allow their LTE communicators to interact more effectively with the cellular network. Users should expect this update to go through sometime later this month. We do not have an exact date as to when the update process will begin. If you have any questions about this update, please contact us at support@alarmgrid.com for more information.

Tags: , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! Unfortunately, we have to keep this news brief, as we are currently preparing for ISC West 2019 in Las Vegas, NV. But a new dual-path communicator from Resideo for their VISTA Systems is now available. Presenting, the all-new Honeywell LTE-IV Verizon LTE Dual-Path Communicator!

The Honeywell LTE-IV uses a hardwired ethernet cable to connect a VISTA Panel to an IP network. If the internet goes down, it will have the ultra-fast and reliable Verizon LTE Cellular Network as a backup. Either way, the system will remain connected with the AlarmNet 360 Servers and the Total Connect 2.0 Service.

This release is huge, as this is currently the only dual-path communicator for a VISTA System that can connect with an LTE Network. Before this, the VISTA Panels had to rely on the Honeywell LTE-XV and Honeywell LTE-XA modules, which had no IP capabilities. Now with the Honeywell LTE-IV, VISTA owners have a dual-path LTE option that will keep their system connected for many years to come!

Note that the Honeywell LTE-IV connects with the Verizon LTE Network. We expect a similar AT&T communicator to be released at some point. You can purchase the Honeywell LTE-IV from the Alarm Grid website. If you have any question, please email support@alarmgrid.com or call (888) 818-7728 from 9am to 8pm EST M-F.

Alarm Grid will post more information about the Honeywell LTE-IV as it becomes available.

Tags: , , , , , , , , ,

Comments


Posted By

As the sunset for 3G cellular networks is quickly approaching, Alarm Grid has some important news regarding support for Verizon's 3G CDMA network. This news affects both the Alarm.com service and Honeywell's AlarmNet server.

As of today, June 1st, 2018, Verizon will no longer activate Alarm.com CDMA cellular communicator SIM cards as they prepare for their CDMA network sunset. If the Verizon SIM card is already activated, which is done during manufacturing, Alarm.com will still allow the account activation to go through.

However, if a communicator is manufactured and never activated with Alarm.com, or if it's activated with Alarm.com but then cancelled, the Verizon SIM will eventually become deactivated. Therefore, it's possible that a CDMA module you already have won't be able to be used if it's not currently active with Alarm.com.

If you have an existing Alarm.com CDMA communicator with a different monitoring company, it can still be "recycled" and brought over to a new alarm company, as long as the communicator is re-activated with the new monitoring company soon after it's cancelled by the existing monitoring company.

Any existing Alarm.com CDMA communicator that is already active with Alarm.com will continue to work for the time being, but will be sunsetting soon.

If you need to purchase a new cellular communicator for an Alarm.com panel, we recommend one of the following Verizon LTE options:

For 2GIG GC3:

For more information on GC3 Firmware Updates, please click here. Also see this guide to upgrade the GC3 communicator.

For 2GIG GC2:

For more information on GC2 Firmware Updates, please click here. Also see this guide to upgrade the GC2 communicator. You can also review the FAQs 2GIG GC2 Firmware Update Instructions Using UPCBL2 and How to Upgrade GC2 Firmware Using a Cable for more information.


2gig ltev a gc3 alarm dot com verizon lte communicator for 2gig

Starting June 30th, 2018, Honeywell AlarmNet CDMA cellular communicators that were manufactured before March 1st, 2018 can no longer be activated. If you have an AlarmNet CDMA communicator that was manufactured before this date, you must activate it by June 30th.

At that time, it will also be impossible to bring a Honeywell CDMA radio from one monitoring company to another. AlarmNet CDMA communicators that were manufactured after March 1st, 2018 can be activated until December 22nd, 2018. Any AlarmNet CDMA communicator that has already been activated will continue to work until the CDMA network is shutdown.

If you need to purchase a new cellular communicator for a Honeywell Alarm System, we suggest buying an LTE module. Alarm Grid recommends the following options based on system type:

Honeywell Lyric Controller: LYRICLTE-V supports Verizon LTE

Honeywell L5210 and L7000 (Firmware 9+): LTE-L57V supports Verizon LTE

Honeywell VISTA Systems: LTE-XV supports Verizon LTE or LTE-IV supports Verizon LTE & IP

Honeywell lyric lte a at and t lte cellular communicator for the

Additionally, if you have a CDMA communicator that has not been activated, you will no longer be able to return it to Alarm Grid for a refund. We will not be taking any CDMA returns as of today. Our company stopped selling CDMA communicators roughly three months ago, and we have been preparing for the 3G sunset for quite some time.

Cellular service providers have already discontinued support for their 2G networks, and they are currently preparing to do the same for their 3G networks. This includes the Verizon 3G CDMA network. Instead, cellular service providers are shifting their focus to their newer and more advanced 4G and LTE networks. If you need to upgrade an alarm system to cellular, you should purchase an LTE module if possible.

Remember, existing CDMA communicators that have already been activated can still be used for the time being. These modules will continue to work until the CDMA network is discontinued. At that point, any CDMA cellular module will need to be replaced and upgraded to a newer communicator.

If you have any questions about this news, please send an email to support@alarmgrid.com. You may also call us at 888-818-7728 from 9am to 8pm EST M-F.

Edit (6/8/18): This blog post previously stated that as of June 1st, no Alarm.com CDMA module that wasn't currently active with Alarm.com service could be activated on a new Alarm.com account, which has changed since it was written. It has been edited to reflect the correct information.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

With the recent release of the LTE-L57V for the L5210 and L7000 Systems, there is now a viable LTE cellular communication module available for all of the most popular Honeywell Alarm Control Panels. Whether you own a Lyric, LYNX Touch or VISTA panel, there is an LTE communicator for you!

The current LTE options are as follows:

Please note that for the Honeywell VISTA 21iP, there is currently no "snap-on" LTE module like that of the AT&T 3G/4G based VISTA-GSM4G. In order to use the Honeywell LTE-XV communicator with the VISTA 21iP, the "internal communications" jumper on the board must be set to the bottom two pins. Make sure to power the system completely down before making this adjustment. The communicator must then be installed as an external radio-like wiring on a VISTA-20P. By adjusting the jumper in this way, the integrated ethernet port for the VISTA 21iP will be disabled. However, this is not a huge concern. LTE cellular connectivity is extremely reliable, and it provides communication speeds that are comparable to that of IP. So even though IP connectivity will no longer be accessible, it is a worthwhile sacrifice to obtain LTE service over older cellular technologies like 3G and CDMA. Remember, LTE service is widely recognized as being the single best communication path available for modern alarm systems.

By releasing these new communicators, Honeywell has made it very clear that LTE cellular communication is the way of the future. This news is also important for users of the Verizon CDMA Network. AlarmNet (Honeywell's cloud server) has stated that new CDMA activations will no longer be permitted after June 1, 2018. This includes cancelling an existing CDMA account and then trying to reactivate it later. Anyone hoping to use CDMA with their Honeywell System must get the communicator active before it's too late. Verizon has promised that CDMA support for existing equipment will remain active until their CDMA network is shutdown. After that, the communicator will need to be upgraded.

All of the current LTE communicators for Honeywell Systems are available for purchase on the Alarm Grid website. We'll be sure to keep you updated with any news regarding additional Honeywell LTE communicators that are released in the future. We do not have any exact timelines for the release of a Verizon LTE module for the Lyric, nor AT&T LTE for the Lynx Touch and VISTA panels. If you have any other questions, feel free to reach out to our support team at support@alarmgrid.com.

Tags: , , , , , , , , , , ,

Comments


Posted By

This is an important message for anyone with a Honeywell VISTA System that uses an LTE-XV Verizon Cellular Communicator. Honeywell will be sending out an automatic firmware update to these communicators. This firmware update will install version 4.0.30 on the communicator. With this automatic update, users can expect a performance upgrade and an enhancement of the module's auto-detect recovery mode.


During this update process, the following messages will generate::

Action

Code
Start FW E903
Power on Reset E339
Complete FW R903

These messages are completely normal, and they are nothing to worry about. The update will take place automatically sometime in the next few days. The update will not affect the usability of your security system. You will also not need to make any changes to your panel's settings. However, we recommend keeping your system powered on and connected to the cellular network during this time. This will allow the firmware update to go through as normal.

If you have any questions about this update and what it means for your panel, please contact support@alarmgrid.com.

Tags: , , , , ,

Comments