Qolsys IQ Panel 2 Verizon LTE Posts

When it comes to home security, houses aren't the only residences that require adequate protection. Apartments are also vulnerable to being taken advantage of by intruders and burglars. Thankfully, with advances in alarm systems, it has never been easier to achieve a DIY security setup.

Because of their smaller size and limited entrances and exits, most apartments don't need as many security sensors as a fully outfitted home. Just a few door and window contacts and a motion sensor can often do the trick. But that said, there's no reason that an apartment resident can't also take full advantage of the exciting home automation capabilities that a modern alarm system has to offer. This handy guide will cover everything needed to obtain a complete security system for an apartment.

Choosing a Panel

Like any security setup, it all starts with the control panel. This device serves as the central hub for the rest of the alarm system. Any sensors that are used with the system will report to the panel to let the system know when an event occurs. The panel is also the device that will send outgoing alerts to a central monitoring station or to the end user. Finally, most system arming and disarming is done right at the panel itself. Since the user will typically interact with their panel on a daily basis, it's very important to select one that is reliable and easy to use. Luckily for users, there are many tremendous options to choose from.

For an apartment, we strongly recommend choosing a wireless security system. These panels are remarkably easy to set up, and they are excellent choices for DIY users. A wireless panel is an all-in-one device that includes its own touchscreen display and wireless receiver for interacting with wireless sensors. Most newer wireless systems also come with a built-in communicator and an integrated Z-Wave controller. A user can also obtain a desk mount for their wireless system. This will eliminate the need to mount the panel to the wall, which is often forbidden by apartment policies. In fact, with a wireless system and wireless alarm sensors, it is possible to achieve a total setup without drilling any holes whatsoever. And if the user decides to move out of their apartment, they can easily take their wireless system with them to their new residence.

Alarm Grid offers some outstanding wireless panels that are great for apartments. One fantastic option in particular is the Qolsys IQ Panel 2. This system features a fresh, sleek design that is sure to fit in very well with any modern apartment. The system is simple to operate, and the menu options come across as very straightforward. The device also comes included with its own desk mount for easy setup. The Qolsys IQ Panel 2 will function with all Qolsys-branded wireless sensors, including the fully encrypted S-Line of sensors. Additionally, the IQ Panel 2 is one of few panels to come with a cellular communicator that is already built-in to the system. It is also WIFI ready right out of the box.

Another panel option is the Honeywell Lyric Controller. The Lyric is the flagship alarm system from Honeywell, a company that has served as a leader in the security industry for decades. It comes WIFI ready, and it can interface with an impressive lineup of different security sensors. This includes the encrypted SiX Series Sensors, which are designed exclusively for the Honeywell Lyric System. The menus are easy to navigate, and getting started with the system is a breeze. With just a WIFI connection and an appropriate monitoring plan, a user can sync their Lyric with Total Connect. This service allows users to arm and disarm their system remotely and check the current status of their security sensors at any time. A special desk mount for the Lyric is available for purchase separately. This will allow the user to avoid mounting the panel to the wall.

We also encourage users to check out our alarm system kits that include everything a new user needs to get started with a security system for their apartment. By going with a kit, a user can save a decent amount of money versus purchasing each component of the security system individually.

All About Sensors

The only types of alarm sensors that are used in most apartments are door and window contacts and motion detectors. Although other alarm sensors can definitely be used as well, they are usually unnecessary for an apartment. Just like with security panels, we advise users to install wireless sensors in an apartment. Wireless sensors are easy to program with an alarm system, and most are mounted using double-sided foam tape. This will prevent the user from having to drill any holes in their walls. Most wireless sensors will function for three to five years before requiring a simple battery replacement. If you are purchasing alarm sensors individually and not with a kit, make sure that the sensors you choose will interface with your alarm system.

A door and window contact is used to let the system know whenever a door or window is opened. These are very simple devices that are easy to understand. Basically, a door and window contact consist of a sensor and a magnet. The sensor is applied on the frame of the door or window, and the magnet is applied on the door or window itself, within a half-inch of the sensor. Double-sided foam tape can secure both of these components. When the door or window is opened, the magnet will separate from the sensor. This will cause a reed switch inside the sensor to activate. When this happens, the sensor will send an signal to the alarm system to let it know about the event. The alarm system will then respond accordingly, based on the programmed Response Type for that zone. For apartments, we recommend using surface-mount contacts over recessed contacts. This is because recessed contacts require holes that are drilled into the door or window frame. If you are purchasing door and window contacts individually and not part of a kit, make sure that they are compatible with your alarm system. Putting a contact on the front door is an absolute must. Many users also place them on windows and interior doors.

Motion detectors are also commonly used in apartments. Simply put, these devices recognize when motion is present, and they let the system know about the activity. A motion detector will certainly come in handy if an intruder is ever able to get inside the apartment without setting off a door or window contact. Most motion detectors operate using passive infrared (PIR) technology. This detection method involves looking out for the infrared energy given off by a potential intruder. When a PIR motion detector is activated, it will take a quick reading of the current infrared energy in the area. If a person or large object suddenly comes into the picture, it will cause a change in infrared energy. This will cause the motion sensor to activate, and the device will then send a signal to the alarm system to perform the programmed response. For most apartments, one motion detecting sensor is usually adequate. We recommend installing an apartment motion sensor in the main room for optimal sensor coverage.

Other alarm sensors are typically not as important for apartments. Glass break sensors can be used to monitor glass windows, but this is usually covered using window contacts and a motion sensor. However, some apartment residents may use a glass break sensor to monitor a glass casing or artwork. Most apartments already come included with a smoke detector. This means that purchasing a separate smoke detector for the alarm system is unnecessary. But a user may want to integrate the conventional smoke detector with their alarm system. For that, we recommend using a smoke detector takeover module, such as an Encore FireFighter FF345. This device will actively listen for the sound of an activated smoke detector. If it detects this type of sound, it will send a signal to the system and trigger an alarm event. If you do use a takeover module, make sure that the model you select is compatible with your alarm system. Finally, most apartment systems will not require any flood sensors since any failed HVAC unit or serious water leak is typically the responsibility of the apartment management.

Communication is Key

Unless you plan on staying home 24/7, you will want an alarm system that can send outbound signals in some way. For monitoring plans, there are two primary options. These are central monitoring plans and self-monitoring plans. The primary difference between these two types of monitoring plans is who is contacted when an alarm event occurs. With self-monitoring, the user will receive a text or email alert letting them know about the alarm. It is then up to the user to contact the appropriate authorities. But with central station monitoring, the alarm event is forwarded to a dedicated central station that operates 24/7. The central station will then request emergency help on the behalf of the user. Regardless of which type of monitoring is used, the alarm system must have some way of sending outbound alerts and reports.

Most alarm systems rely on cellular services or an internet (IP) connection as their primary communication path. Some alarm systems will use both of these communication methods for added reliability. The type of communication that is used will have an effect on the user's security setup and their monitoring plan. Cellular communication is considered to be more reliable than IP communication. This is because cellular service is almost never down, and it will still continue to operate in the event of a power outage. Also some interactive service platforms, like Alarm.com, require that the panel utilize a cellular connection, and they cannot be accessed using WIFI alone. But the advantage with IP communication is that it is usually less expensive than cellular monitoring. Additionally, while many panels already come WIFI ready, only a few can use cellular communication without a separate cellular communicator being added. Overall, the choice between IP and cellular comes down to the type of alarm system the user has and how reliable they want their system to be.

Additional Features and Possible Add-Ons

Some apartment residents might want their alarm system to go beyond just performing security tasks. Many newer alarm systems come complete with a Z-Wave controller for operating Z-Wave home automation devices. However, most apartments will only allow users to take advantage of Z-Wave lights. These lights can be operated right from the alarm panel or using an interactive service like Total Connect or Alarm.com. Other popular Z-Wave devices include Z-Wave thermostats and Z-Wave door locks, but these are less likely to be used in apartment. A Z-Wave thermostat allows a user to adjust the temperature inside their residence from virtually anywhere. But many users might not feel comfortable replacing their apartment's standard thermostat with their own. Z-Wave locks allow users to lock or unlock their doors remotely. They can also unlock the door and disarm their system simultaneously by entering in a valid system code into the keypad on the Z-Wave door lock. Unfortunately, most landlords will not allow apartment occupants to change the locks on their doors. With those considerations in mind, Z-Wave home automation is often skipped by apartment residents. Still, the features are always available if the user ever does decide to use them.

A greater number of apartment residents will take advantage of an interactive service with their system. These services allow users to access their alarm systems from anywhere using a convenient and easy to use mobile app. By accessing this type of service, a user can arm or disarm their system, check the status of sensors and control their Z-Wave devices from almost anywhere. These services are also used to contact the user during an alarm event. Two popular interactive service platforms for alarm systems are Total Connect and Alarm.com. Total Connect is designed exclusively for use with Honeywell Alarm Panels, while Alarm.com will work with systems from many different companies, including Qolsys and 2GIG. To access the Alarm.com service, cellular communication is required. Bu with Total Connect, an IP connection or a cellular connection can be used. Both services offer similar functions and features, so the one that is used will really depend on the alarm system being used. Most monitoring plans include this type of service, so the user should take full advantage of it.

Finally, some users may decide to use additional add-ons with their security setups. That said, these are also less commonly used with apartment systems. A secondary keypad can provide an additional point of access for an alarm system. But since most apartments are relatively small, this is usually unnecessary. A wireless repeater can extend the range of wireless sensors. But again, since most apartments are quite small this is also usually not needed. If the setup is based around a hardwired system, then a wireless receiver is needed to use wireless sensors. For apartments though, we strongly encourage users to use wireless systems instead of hardwired panels. Finally, some users may want to use security cameras with their setup. These devices are easy to use and install, and many indoor cameras don't require any drilling. However, a user will most likely need to upgrade their monitoring plan if they want to use security cameras.

Conclusion

Getting started with an apartment alarm system is very easy. In most cases, fewer sensors and add-ons are required. A wireless panel and sensors will make it for easy for DIY users to setup their systems without having to drill any holes or perform any wiring. Once everything is setup, a user will receive complete piece of mind in knowing that their residence is fully protected. Now is a better time than ever to get started with home security. Get an alarm system for your apartment today!

At Alarm Grid, we often encourage users to "roll with what they got" and get as much as they can out of their current system. But there are some cases where enough is enough, and upgrading to a brand-new panel is the best option. Here are 5 reasons for you to make a system upgrade.

1. You don't know the Installer Code. Virtually every alarm system comes equipped with a default Installer Code that is absolutely necessary for providing basic programming functions. We recommend leaving this code at the default because it can be very difficult to get into programming if you lose this code. Additionally, you might not know the system's Installer Code if it was monitored by a different company that intentionally changed the code.

Some systems will technically allow you to get back into programming even if you lose this code. However, this can be a tedious process, as you may need to reset the system to factory default settings. This would require you to reprogram every sensor for the system. And some systems don't even allow this. So if you lose your Installer Code and can't get back into programming, sometimes the best option is to just start fresh with a completely new security system. Depending on the system you choose, you may even be able to keep all your old sensors as well.

2. You want more reliable communication. Nearly every alarm system on the market today is capable of achieving a dual-path communication setup with WIFI and cellular connectivity. This type of setup will provide ultra-fast speeds and excellent reliability. Even many older systems can be upgraded to achieve a similar setup. Cellular connectivity in particular is highly important for anyone who is serious about receiving reliable alarm monitoring services.

Unfortunately, some older systems are stuck using phone line monitoring, and they cannot be upgraded to a superior communication path. Using a phone line is extremely discouraged, as it is an outdated technology that offers unreliable service and slow connection speeds. Not to mention, phone service has some serious issues of its own. So if you're still using an alarm system with phone line connectivity, and you want more reliable and faster monitoring, it might time to make a change.

3. You want easier daily access. Many older alarm systems are controlled through touch-button keypads that are wired in with the system. While this is fine for many users, it doesn't necessarily compare with the convenience of a touchscreen controller. This type of control will make it much easier to perform daily tasks like arming and disarming from the panel. And while there are certain touchscreen controllers for certain systems (e.g. the Honeywell Tuxedo Touch for VISTA Panels and the Interlogix Two-Way Talking TouchScreen for Interlogix Panels), they are often very expensive in their own right.

Many users often find that the best option is to simply ditch their hardwired system entirely and upgrade to a new wireless one with a touchscreen. And even if you have a large number of hardwired sensors, you can probably bring them over with a compatible wired to wireless converter. For example, the Honeywell 5800C2W will allow hardwired sensors to be used with a new wireless Honeywell System.

4. You want more advanced sensors. Alarm sensors are continuing to become more and more advanced over time. And eventually, certain features that are added will simply be incompatible with an older system. An example of this involves the Honeywell SiX Series Sensors and the Qolsys S-Line Sensors. These sensors are both protected by 128-bit AES encryption, which makes them virtually impossible to takeover or hack into. However, this encryption limits their system compatibility. For the SiX Series Sensors, they can only work with Honeywell Lyric Panels. Meanwhile, the Qolsys S-Line Sensors will only work with the Qolsys IQ Panel 2.

It's not to say that older legacy sensors are bad or anything. They will work just fine with a security setup. But they aren't always going to offer the same advanced features and capabilities as newer sensors. So any users who want to incorporate more advanced system sensors into their setup may need to make an upgrade.

5. You want to obtain a smart home. Older alarm systems are often limited in how they can be controlled remotely. They are also sometimes restricted in their functionality with smart home applications, such as Google Home and Apple HomeKit. Most of this is done through an interactive service platform, like Honeywell's Total Connect 2.0 or Alarm.com. In fact, most security experts would agree that an alarm system is fairly outdate if it cannot connect with an interactive service platform.

An interactive service is usually accessed through a web browser or through a mobile app on a smartphone. There are some useful basic features that come with virtually any interactive service. These features include arming and disarming the system, checking the status of sensors, controlling Z-Wave home automation devices and viewing the live feed of programmed security sensors. So with access to an interactive service platform, these actions can be performed from nearly anywhere in the world.

Most smart home devices follow a certain protocol when interacting with an alarm system. In these cases, an interactive service platform typically acts as a "middleman" between the smart device and the security system. Any command that is is sent through the smart device (e.g. a Google Home device or an Amazon Alexa device) will first be sent to the interactive service server (e.g. Total Connect 2.0 or Alarm.com) and then to the system (e.g. the Honeywell Lyric Controller or the 2GIG GC3).

However, this type of access can be impossible for older alarm systems. So if you want to obtain a smarter home security setup, upgrading your system may be a good first step.

So, which system is right for me?

If you're in the market for a new system, we generally recommend choosing a wireless system. Most users find that wireless systems are easier to program, and they will provide all-in-one access for the user. These systems are also compatible with some of the most advanced sensors on the market, and they can all be used with an interactive service platform.

Our most favorite systems are the Honeywell Lyric Controller, the 2GIG GC3 and the Qolsys IQ Panel 2. These are all outstanding wireless systems that will provide tremendous functions and features for an end user. They are also each compatible with certain smart home applications. Make sure to check compatibility before making your decision if you want to achieve a smart home setup. But regardless, you can't go wrong with any of these outstanding systems.

One of Alarm Grid's best partners Qolsys has announced that their upcoming IQ Panels with PowerG support have officially received UL certification. It appears as though the company is currently on track to have these new systems ready for a public release later this summer season.

PowerG is a wireless sensor lineup from DSC. These are state-of-the-art security sensors that boast some highly impressive capabilities and features. They operate at a considerably higher frequency (915 MHz) than most other wireless sensors, meaning that they will not interfere with other devices. The range of these sensors is absolutely insane, as they can operate from nearly half a mile away from the panel when used indoors. The sensor also use 128-bit AES encryption to prevent them from being hacked or spoofed. Needless to say, we are very excited that Qolsys Systems will soon be able to support these sensors.

Qolsys previously announced at ISC West 2018 that a PowerG daughtercard would be made available for their IQ Panel 2. By installing this daughtercard, the system will be able to support PowerG sensors. Qolsys will also likely produce IQ Panel 2 Systems with the daughtercard already integrated, and also possibly other PowerG-compatible systems as well. So far the PowerG lineup includes outdoor PIR motion detectors with integrated cameras, outdoor siren/strobe devices and a door contact with a wired input for long-range expansion.

ISC West 2018 was also when Qolsys announced that they would soon be offering legacy daughtercards for the IQ Panel 2. These daughtercards are available in 319.5 MHz (Qolsys and Interlogix/GE Sensors), 345 MHz (legacy Honeywell and 2GIG Sensors) and 433 MHz (legacy DSC Sensors). Please note that the system will only support one PowerG daughtercard and one legacy daughtercard at any given time.

Alarm Grid will make sure to keep you up to date with any of the latest news regarding Qolsys and PowerG support. Keep an eye on our blog for more information.

Qolsys is releasing an automatic firmware update for any IQ Panel 2 that is running firmware version 2.0.6 or lower. This is firmware update 2.1.1, and it is designed to improve the overall stability of the system. The update will be applied on Monday, June 4th, and it will take about 12 minutes to complete.

The panel will then reboot once the update has finished. The update will only be applied when the system is in a disarmed state. Users should not notice any difference to their IQ Panel 2 System after the update has gone through.

If you have any questions about this automatic update, please email us at support@alarmgrid.com, or call us at 888-818-7728 between 9am and 8pm EST M-F.

Qolsys has announced that software update 2.1.1 for the IQ Panel 2 will be made available tomorrow, May 1st, 2018. This update includes various fixes and improvements that should improve the functionality of the system. The update can be installed wireless if the IQ Panel 2 is connected to a WIFI network and currently running software version 2.0.1 or higher.

Some of the benefits of this update include:

• Automatic communication tests will now report as E602, while manual communication tests will now report as E601.
• System will no longer report cellular signal strength when disconnected from the network.
• IQ Remote will now report correct supervision status on Alarm.com.
• IQ remote will no longer display a red emergency screen at incorrect times.
• Improvements in connectivity and function with DSC Power-G Sensors.
• Nighttime mode will no longer turn Z-Wave voice prompts on if the feature is disable.

You can update your IQ Panel 2 to software version 2.1.1 by completing the following steps:

1. Press the small grey bar at the top of the home screen, and choose "Settings".
2. Choose "Advanced Settings".
3. Enter the system's Installer Code (default is 1111).
4. Choose "Upgrade Software".
5. Choose "Patch Tag", and then enter in "iqpanel2.1.1". Then press "OK".
6. Choose "Upgrade Using Network". If the panel is connected to WIFI, the update will download and install.
7. Once the upgrade is complete, press "OK". The panel will begin the rebooting process, which should take about five minutes to fully complete. After the panel reboot, the home screen will appear, and the LED light will turn green.

Remember, the update will be available starting Tuesday, May 1st. If you are interested in the update, the Alarm Grid support team can remotely download the firmware via Alarm.com. Simply email us at support@alarmgrid.com to place your request.

Alarm Grid is excited to announce that we are now selling a brand new security panel, the Qolsys IQ Panel 2. This state-of-the-art system is an excellent option for any DIY user who is looking to get started with home security. The panel offers a sleek and modern look, and it comes fully loaded with everything a new user needs to get an alarm system up and running. It is also very easy to use, and its intuitive programming process makes setting up the system a very simple task.

The IQ Panel 2 is the first-ever system offered on our site to come pre-included with a built-in cellular communicator. This means that an end user won't have to purchase a cellular communicator separately. Users can choose between an AT&T version and a Verizon version of the panel. This has nothing to do with the user's personal cellular service, and we recommend choosing whichever service works better in the area. Both versions provide lightning-fast LTE speeds, which will surely provide a tremendous user experience.

The IQ Panel 2 also comes WIFI ready, allowing the user to take full advantage of the exceptional speed and reliability of a dual-path communication setup. This will definitely come in handy if the system ever needs to communicate out to a central monitoring station. In order to use cellular communication, a user will need to obtain a monitoring plan at either the Gold or Platinum level.

We expect that users will thoroughly enjoy navigating the IQ Panel 2. The system boasts a beautiful, full-color, 7-inch touchscreen display with large and easy to identify buttons and menu options. Our early experience is that new sensors integrate with the system with ease, and the quick learning curve will be appreciated by new users. This truly makes it a great panel for both new users of alarm systems, as well experienced users looking for a new wireless system to get up and running.

The other exciting aspect of the IQ Panel 2 is the amount of features and capabilities that the system is ready to use right out of the box. The panel is Z-Wave ready, making it a fantastic choice for any user who is looking to get started with home automation. It can also sync with the Alarm.com interactive service. This allows users to arm or disarm their IQ Panel 2, check the status of security sensors, and even control Z-Wave devices from virtually anywhere in the world. This is all possible thanks to the Total Connect Mobile App, which is available for free on Android and iOS devices.

A unique aspect of the Qolsys IQ Panel 2 is that it is designed to interface with its own lineup of Qolsys security sensors. These wireless sensors communicate at a frequency of 319.5 MHz, making them compatible exclusively with Qolsys Systems. In addition to standard, uni-directional sensors, Qolsys also offers its S-Line of security products. The S-Line Sensors are fully protected by 128-bit AES encryption, making them impossible to be hacked or taken over by others. This is great for any user who wants to achieve a setup with the strongest level of protection possible. Up to 128 different wireless zones can be used with the system, providing the user with outstanding programming flexibility. Additionally, Qolsys also offers its encrypted Hardwired 16-S, making it easy for users who want to bring older hardwired sensors over to their new Qolsys IQ Panel 2.

The IQ Panel 2 is available for purchase right now on the Alarm Grid website. Now is a better time than ever to upgrade to a brand-new wireless alarm system. Order yours today!

Alarm Grid has been working tirelessly to launch the full line of Qolsys's panels. These panels are state of the art, built on Google Android, and they look great. They are built to work on Alarm.com, and have already come out with a line of encrypted sensors. This distinguishes the line from the GC3, which has the capability of communicating with encrypted sensors, but 2GIG has not yet release the compatible encrypted sensors.

Just like the 2GIG GC3 or the Honeywell Lyric, the Qolsys is simple to use. We have tested it extensively and we are comfortable offering this line to our customers. Like our other panels, we will be putting together a full set of FAQs on the Qolsys panels so that our DIY folks can do most of their own installation and programming.

Qolsys has two panels, despite having only been around a little while. Their first one, the IQ Panel, made a big splash. Built on Android, the system function astoundingly well, standing up to the major players in the space. The IQ Panel 2, however, is on a different level. It's clean, thin, made of glass. The system joins the pantheon of modern systems as a great looking item to have on the wall of any home.

Armed with all the basic features of a security system, the Qolsys IQ Panel 2 comes with it some amazing little extra touches that neither Honeywell nor 2GIG have added to the Lyric or Go!Control lines as of yet. The ease of updating this system is unparalleled, and its got some great diagnostic features to help setup Z-Wave sensors. In-all, it is the perfect panel for the avid DIYer, and it won't disappoint anyone who is used to the Honeywell and 2GIG quality,

For those who don't like the look of the Qolsys's sensors, Alarm Grid is making available a new sensor. The Alarm Grid 319.5 MHz sensor which is reliable, cheap, and looks great. We are selling them as single units, in packs of 5, and in packs of 10.