Honeywell VISTA-20P-6160KT Posts

Posted By

Just a little while back, we wrote about how Honeywell had introduced the new Honeywell 6162 and 6152 keypads. These new wired keypads have some awesome new features that make programming a little less confusing, and a little more "GUI" (graphical user interface) based. Honeywell is calling the new programming interface VIP and it is only available to users with VIP compatible keypads if their alarm system has the newest 9.18 PROM chips on their Vista 20P and VISTA 15P circuit boards. Honeywell is shipping the new V20P/V15P panels that have the 9.18 chips already installed for those that are purchasing new systems. However, if you are interested in upgrading an existing system to support the VIP programming, you don't need to purchase an entire new system. We offer a standalone VISTA-20P PROM chip and a standalone VISTA-15P PROM chip that you can use to to upgrade the panel without needing to reprogram any settings. Until this week, we were distributing the older 9.12 prom chips that supported Total Connect 2.0 as Honeywell had not released the standalone 9.18 chips. We are happy to announce that as of this week, we do have the new 9.18 PROMs.

While having an updated, state-of-the-art panel is what everyone wants, getting the 9.18 PROM chip is not necessary for everyone. First, check the revision of your system. Then, here are a few things to consider before you jump in and get the new chip set:

What is different about the new revision?

The only difference so far as we have been told between the 9.12 PROM and the 9.18 PROM is the ability to use VIP programming. So before you jump into a new revision, decide whether the VIP programming is something you want. If you have an old 6160 keypad, the answer is simple. You can't do VIP programming. On the other hand, if you have a 6162 keypad, the VIP programming is something you can definitely make use of if you have the right PROM.

Do I need the 9.18 PROM to use Total Connect 2.0?

Nope! The new 9.18 PROMs do support Total Connect 2.0 service, but any system with at least a 9.12 PROM will support Total Connect 2.0 as well. The 9.18 chips won't give you any added Total Connect features as of yet. We'll let you know if that changes.

Will the old communicators work with the new revision?

Honeywell hasn't made any changes to their communicators. So the 15P and 20P communicators that worked for 9.12 panels will continue to work for 9.18 revision panels: GSMV4G, GSMX4G, 7847i, and iGSMV4G

Tags: , , , , , , , , , ,

Comments