Qolsys IQ Panel 2 Plus 345 MHz Verizon-LTE 10-1 PowerG Kit Posts

Posted By

Qolsys has released the long-awaited Firmware Version 2.6.0. This will be the base version for the Qolsys IQ Hub and will allow users to configure the new IQ WIFI Mesh Router from the touchscreen of the IQ Panel 2. These are only a couple of the new features. This is truly an exciting update!

We've been talking about the Qolsys IQ Hub, well, forever, it seems. But honestly, it's been "coming soon" for over a year now. We are so glad that the wait is almost over. The Qolsys IQ Hub will truly be a DIY dream. Qolsys has taken a "see no green" approach to this panel, meaning there is no reason to open the panel fully, so you should never see the green printed circuit board (PCB). It won't even have screw terminals! The battery will be easily end-user replaceable with a minimum of "deconstruction" to the alarm panel itself. Some of the best features of the IQ Panel 2/2+ will be available in this new panel, such as Bluetooth disarming, and Alarm.com Camera Streaming at the panel.

A couple of things have been removed though. It will not have a built-in camera, nor will it offer 2-way voice capability. The IQ Hub is meant to be a slightly less expensive alternative to the IQ Panel 2 or 2 Plus, and to the Qolsys IQ Panel 4 that we should be seeing later this year. Initially, the IQ Hub will support PowerG Wireless Sensors, but later, there will be 319.5 MHz, 345 MHz, and 433 MHz options available. Each IQ Hub is intended to support only one (1) RF frequency.

You might be saying, "I thought this was a blog about Firmware Version 2.6.0?" Well, it is. But the fact that we have Firmware Version 2.6.0 available now means that the full release of the Qolsys IQ Hub won't be far behind. The Qolsys IQ Hub is scheduled for a Q2 2021 release. Aside from all the new features and improvements for the IQ Panel 2 Plus itself, another exciting capability that is added in this firmware release is the ability to control and configure the new Qolsys IQ Router through the IQ Panel 2 or 2 Plus Touchscreen.

The Qolsys IQ Router is also slated for release in Q2 of 2021. This is a mesh router system that will support up to eight (8) nodes, and both 2.4 GHz and 5 GHz networks. What's great about this product is that it allows a user to create a WIFI subnet inside their regular network. Any devices that use WIFI can be attached to the network, not just security devices, and multiple nodes (up to 8) can be added to strengthen the mesh network. If you change internet providers or even just internet equipment, you simply unplug the IQ Router from the existing router, plug it into the new router, and all of the WIFI devices will remain connected to the WIFI sub-network without having to reconfigure any of them. These are two upcoming products associated with the release of Firmware Version 2.6.0 that we're really looking forward to.

Below you'll find some of the additional new features supported on Firmware Version 2.6.0:

New Features:

  • Support for DSC hardwire keypads (HS2LCD, HS2ICN) via the CORBUS on the PowerG Hardwire to Wireless Translator (PG9WLSHW8) with Firmware V 1.1. Also added new PGM system triggers for Police, Fire, Aux & CO emergency.
  • Support for DSC NEO Wire-Free Keypads HS2LCDWFx, HS2LCDWFxENG.
  • Support for new V4 PowerG Daughter Card.
  • Panel now supports remote Z-Wave Smart Start integration from Alarm.com.
  • This update includes the critical firmware2 fix that resolves an issue where certain panels would automatically reboot with previous firmware applied.

Fixes & Improvements

  • Added a setting to allow the panel to send 1 or 10 images taken by PowerG Image Sensor Cameras (PG9934P, PG9944, NEXT CAM, PG2, NEXT CAM K9-85 PG2, BW-IRC, BW-IPC, TOWER CAM PG2, BW-ODC) during an alarm event to Alarm.com. Previously, ten (10) images were stored locally at the panel, but only the first image was sent to Alarm.com.
  • Added a setting allowing alarm dealers to select a specific time for Communication Tests to be sent to the monitoring station. If no selection is made, the time will be randomized.
  • Added a setting for detection direction on PG9902 Outdoor Curtain PIR. Users can choose left to right, right to left, or both.
  • Added the ability to disable PowerG activation LED on devices that have one in order to conserve battery.
  • Added Partition support for EN Grade 2 Panels.
  • Improved 700-Series Z-Wave performance on UK & EU Panels.
  • Bluetooth Disarm now available for UK & EU Panels.
  • Added language support for Spanish (Spain), French (France), Finnish, and Polish.
  • Added support for European date format: DD.MM.YYYY.
  • Improved cellular strength matching between Panel and Alarm.com for Latin America.
  • Silent and Audible Panics now report separate CID codes to central station.
  • Duress Alarm and Silent Police Panic can now be dismissed from Alarm.com.
  • Improvements to PowerG Wireless keypad functionality (WS9LCDWFx).
  • Keyfob arming now follows the Auto-Bypass setting on the panel.
  • Duress codes from KP-140 & KP-141 now transmit to Alarm.com.
  • Corrected an issue where a PG9905 Temperature Sensor would send double alarms for the same event.
  • Fixed an issue related to virtual device integration on the panel, which includes Liftmaster Garage Door control from the panel UI, and Solar Integration from Alarm.com. See TSB 201026 for additional details.

Into each life, a little rain must fall. It's not all good news, although, this is more of an inconvenience than actual bad news. Because Firmware Version 2.6.0 also contains the important firmware2 fix, it must be downloaded and installed from the Qolsys Server. The server has some logic built-in that allows it to tell if the panel being updated requires the firmware2 fix, or not. For this reason, much like Firmware version 2.5.5, Qolsys is not making this firmware file available for download. This means that Alarm Grid can't host it on our site.

What this means for the end-user is that in order to get 2.6.0, your panel must have a WIFI connection. Once it does, you have two ways in which you can get the firmware. You can request it from your alarm dealer, and they can push the update to your panel from Alarm.com. This will be a free update. As long as your panel has WIFI 24/7, this is a simple and no-fuss way to get your panel updated. Just remember, if for some reason your panel loses WIFI, the update won't go through. Alarm.com will not allow the panel to be updated via a cellular-only connection. You can also follow the instructions below to request the update via Patch Tag.

If your panel happens to be in an area where there is no WIFI, maybe it's a hunting or fishing cabin, or a second home where WIFI is not readily available, then you may be able to use your cell phone as a mobile hotspot and fool the panel into thinking it's connected to WIFI. The amount of data in this file is about 250 MB according to Qolsys. Alternatively, you may be able to move the panel to a spot that has WIFI available just long enough to perform the upgrade. In a situation like this, you need to be in control of when the update begins, so in this case, you would want to use the "Patch Tag" method of updating. To do so, once your panel has a WIFI connection, do the following:

Follow these instructions after making sure your panel is on version 2.0.1 or higher. If the panel is on 2.5.0 or 2.5.1, the user must first update to 2.5.3 before running the update for 2.6.0:

  • Touch the small gray bar in the center at the top of the Home screen on the panel.
  • Touch “Settings”
  • Touch “Advanced Settings”
  • Enter a valid Installer or Dealer Code (defaults are 1111 and 2222 respectively)
  • Touch “Upgrade Software”.
  • Touch “Patch Tag” and enter: iqpanel2.6.0 then touch “OK”.
  • Important: If you need to install 2.5.3 prior to this update, the Patch Tag for that version is: iqpanel2.5.3. Run that update before running the Patch Tag for 2.6.0.
  • Touch “Upgrade Using Network”. If the panel is connected to WIFI, the system will begin downloading the update, it will be installed when the download completes. Once the update begins Do Not Touch The Screen! The update will take about five (5) minutes, and the panel will reboot as a part of the process. When the panel returns to the home screen and the Green LED at the right lights, the process has completed.

What do you think about the new Qolsys firmware, and the new products they have in the pipeline? Share your thoughts in the comments below. Is there a security topic you'd like to see us discuss? If so, leave a comment and we'll be happy to cover any security-related topics of interest. As always, we look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Most of these best security systems lists are frustrating to navigate. Many of them include companies and their respective rating. ADT, Brinks, Vivint, or others will make the cut. We’re sad to never be included in these lists. But that reflects the state of the industry. Many people don’t know that other alarm monitoring companies exist. Still others only include the new DIY systems that are on the market like Simplisafe, Ring, Nest, or Scout. Consumer Reports, for example, only reviews Nest, Ring, Abode, Frontpoint, Simplisafe, and Samsung’s Smarthings integrated GC3 that they produced for ADT. This list is, in no way, a complete list of products. Moreover, it completely ignores legacy and current systems. And, while we like “new,” being in the industry, we are proud to say that the so-called “professional” systems that are out there are better than these systems for a few simple reasons.

Our list includes exclusively professional equipment. It is the same equipment that ADT or other installation companies might sell you. We’ve tested a lot of these DIY systems. They work well to varying degrees. But we have found that nothing surpasses the quality or features of a professional system. What’s more, we provide the help that you need to turn these professionally installed systems into the DIY systems that you may be looking for.

Yup! You heard that right. You don’t need a professional to install a professional home security system.

They are simple enough to install and operate that you can do it yourself. Additionally, you can have them monitored by anyone. We think that this feature is the feature that sets them apart from any of the new “DIY” systems. Simplisafe systems must be monitored by Simplisafe. Ring systems must be monitored by Amazon. Nest systems must be monitored by Google’s chosen provider: Monitronics (now Brinks).

But a professional system can be monitored by any alarm company. We certainly do monitor them. But if you’re interested in having a local installer at your beck and call, you can have Larry the alarm installer from down the road monitor it as well.

In all, these systems are not easy to rank. Each one comes with its own set of features and benefits. So we have organized the following list based on your own possible set of needs.

So without further ado, here are the 3 best alarm systems of 2020.

Best Interactive Service of 2020

Alarm.com

Interactive services are the apps that allow you to control your alarm system from your phone or computer. There are dozens of such services. Some companies, such as the ones we mentioned above have their own proprietary service. But then, there are a few universal services. These are sold by Interlogix, DSC, Alarmnet (Honeywell), Securenet and others. Our favorite of these interactive services is alarm.com. It is a great service that works with Qolsys products, DSC products, Interlogix products, 2GIG products, and more. Unfortunately, it does not work with most Honeywell products.

It provides a wide array of controls, including the ability to use SIRI to command your system and schedule Z-Wave scenes. The drawback is that Alarm.com requires users to sign up for cellular monitoring. This is the best, most robust kind of monitoring. But some users don’t want that level of connectivity. Some end users are satisfied with just IP monitoring. In the 90s, particularly, phone line monitoring was the norm. Modern monitoring has found other, better, more secure options. No one can cut the line of a cellular device, for example. IP monitoring suffers from many of the same problems as phone line monitoring. But it also allows users to get many of the advantages of cellular monitoring, including homeowner’s insurance discounts. Even still, despite this drawback of alarm.com, it is our preferred interactive service.

That said, its closest competition is Honeywell’s Total Connect. Total Connect only works with Honeywell. It does almost everything that Alarm.com does, with a few specific differences - no native SIRI control, for example. That said, Honeywell makes excellent equipment. The Lyric alarm, for example, works with HomeKit. This integration will allow individual control of the unit from SIRI. This is actually more robust than even alarm.com’s SIRI integration. And the only options that a HomeKit user has on the Alarm.com side is the DSC iotega, which is a system that works, but for many reasons, doesn’t make this list.

Ultimately, whether you use Alarm.com or Total Connect, it will depend on your system’s interactive service compatibility. If you are interested in system features, look at the systems below. If you are more concerned with the usability of the interactive service, you can certainly pick a system based on its qualities and compatibility with an interactive service.

Runner Up: Total Connect

Best Overall System of 2020

Qolsys IQ Panel 2+

This security system is an amazing piece of equipment. It is a great looking home automation controller as well as a security system. It’s Alarm.com compatibility is a great feature that makes the Qolsys IQ Panel 2+ a stratospherically better panel than almost anything on the market. The system is built on the Android operating system. Ultimately, the Qolsys is what you get when you beset a Silicon Valley company with the task of building a professional alarm system. It is feature filled, beautifully and competently built.

One of the frustrations with the Qolsys is its lack of modularity. It is an expensive system. Everything is built in to the panel. Whereas most security systems allow a user to install (and uninstall) a cellular communicator, the Qolsys builds the communicator right into the panel itself. This sounds like a great feature, and it is. But that’s until the system’s communicator becomes obsolete. It’s something that doesn’t happen very often, but every 10 or so years, the cellular companies deprecate one or more of their networks. At this very moment, Alarm Grid’s subscribers are preparing to replace thousands of communicators. As Verizon and AT&T deprecate their old CDMA and 3G networks, the systems that have included these communicators are coming due for an upgrade. The drawback of the Qolsys is that there is no upgrade per se. Rather, end users with an older Qolsys will have to replace the entire panel.

Despite this drawback, the Qolsys is a great unit. One of its best features is its ability to take over old systems. For those that are looking to replace an old system, the Qolsys is a great choice. The new Qolsys IQ Panel 2 Plus’s come in different varieties, each with a daughter card that allows them to grab the signals from other company’s wireless sensors.

Just awesome!

In our opinion the best feature of the new Qolsys IQ Panel 2 Plus, however, is not its amazing home automation features or its ability to take over other systems. It’s not even its slick Android interface. All those features can and are replicated by its competitors. Rather, our favorite feature of the Qolsys is its sensor’s ranges. The Qolsys is a panel whose PowerG sensors, which are encrypted, are capable of being monitored over HUGE ranges. We have seen the Qolsys detect sensors that are nearly a half mile away. This makes the PowerG line of sensors that are compatible with the Qolsys an amazing feature that no other all-in-one system has. These sensors basically remove the need for expensive repeaters. They are modern sensors that no other company has.

Eat your heart out Google, Amazon, and all ya’ll Silicon Valley companies trying to build better systems. None of these systems even touch the quality of the Qolsys in our opinion.

Runner-up: 2GIG GC3e

Best HomeKit Compatible System of 2020

Honeywell Lyric

The Lyric is in competition with DSC’s Iotega, which works as a HomeKit controller. If you’re looking for HomeKit control, and your home is filled with DSC sensors, the Iotega might be a better choice for you. But if you’re starting from scratch, nothing is better than the Lyric controller. This system is compatible with a wide range of sensors, including America’s most sold sensor, the 5816. It looks great on a wall. It’s fairly priced, and it does everything you’d want from a good looking system, including a photo album feature.

We sold more Lyric’s in 2019 than any other system on the market. This is largely due to Honeywell’s trusted name. The quality exemplified by the brand is epitomized in this sleek wall unit. Its versatility is buttressed by the hundreds of compatible sensors that Honeywell has released over the years.

We like Honeywell’s no-nonsense approach to monitoring. They put security over all. They were the first mainstream system on the market with both a panel and encrypted sensors. And the sensors work immensely well. We love Honeywell. We love the Lyric. At the moment, we believe that the Qolsys has surpassed the features of Honeywell’s alarm system. But the Lyric has one feature that Qolsys simply does not: the ability to be monitored by WiFi only. In fact, nearly all of Honeywell’s all-in-one systems can be monitored by WiFi only. For an end user, this means that they can be professionally monitored at a price that is significantly cheaper than that of a cellular system. For the budget conscience consumer, this presents an amazing opportunity to save money while getting all the benefits of a monitored system, including insurance discounts. We are a big fan of cellular monitoring. But the option is there for those who simply don’t think it’s as important as we do or for those who don’t want to pay the cost of cellular monitoring.

Runner Up: DSC iotega

Best Budget Alarm System

Honeywell L3000


We spent a lot of time debating whether the L3000 would be the best system for someone on a budget. We actually prefer the GC2e as a system. It’s a great looking system, it’s inexpensive, and it uses Alarm.com. But here’s the problem: it requires that anyone using it purchase a cellular communicator. Additionally, because its most minimal monitoring will include Alarm.com. This puts anyone purchasing it into a different category of spending. That said, if it’s not outside of your budget, the GC2e is a great system. It is our runner-up, because it is a good budget system, but it’s not great.

The low price of the L3000 is no indication of its quality. It is because it is a legacy system. It is often used by alarm companies that are putting systems into big apartment buildings. The system is amazing. It’s effective, will last for a very long time. Unfortunately, it’s ugly and can be a bear to program. Luckily for owners, programming is not something you do more than one time. And if you’re with Alarm Grid, there is a strong chance that we can program it for you.

Unlike the GC2e, the L3000 allows users to do IP-only monitoring. It also allows old-school phone line monitoring. That means, for the budget-conscious consumer, the L3000 is both cheaper to purchase than the GC2e, and will save an end user between $10 and $20 per month. In all, the L3000 will save anyone who installs it between $120 and $240 per year, while also being incredibly affordable at the outset. Huzzah! Oh, and for those concerned about sensors, the L3000 works great with any of the Honeywell’s 5800 sensors. You will have a ton of sensors to pick from, which also makes the system the most versatile budget system on the market.

We love the L3000 as a budget system.

Runner-Up: 2GIG GC2e

Best Wired Alarm System of 2020

Honeywell VISTA 20P

This is an oldie but a goodie. The VISTA 20P has been produced by Honeywell for many many years now. It's an excellent system with great, modern features. Honeywell produces update chips that they release every once in a while. These updates allow the system to take advantage of modern features like those available in the VAM or Tuxedo Touch. Home Automation? You can do it using the VISTA 20P. Manage both wired and wireless sensors? You can do that very easily with the VISTA 20P by adding a wireless receiver or a keypad with a wireless receiver built in. In all, this system has all the same great features of its all-in-one wireless contemporaries. 2 drawbacks to speak of, though: 1) it's big and bulky; 2) programming these systems sucks.

Runner-up: Honeywell VISTA 21iP

What Else is Coming in 2020?

Every year, professional systems get better and better. The systems that are coming soon are no different. In the coming months, we are expecting the release of Qolsys’s new Hub as well as Honeywell’s ProSeries panel. 2GIG hasn’t announced anything yet. But they just released the encrypted versions of their panels.

Unfortunately, 2019 saw the close of Interlogix’s security systems production division. While interlogix was not known for the incredible innovation of their systems, they made great budget models that gave users a simple, cheap entry point into security systems. They will be missed. But the three main producers--2GIG, Qolsys, and Resideo (formerly Honeywell)--are continuing to pioneer new and innovative features.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

For anyone still look for a super last-minute holiday gift idea, we would like to recommend one of our Qolsys IQ Panel 2 Plus PowerG Kits. To make the deal more enticing, we have just permanently lowered the pricing on ALL of these kits. A fantastic system is now even more affordable!

Qolsys iq panel 2 plus 319 dot 5 mhz verizon lte 10 1 powerg kit

If you don't know about the Qolsys IQ Panel 2 Plus, then we strongly recommend checking out our recent 2019 Holiday Buying Guide for the system. That guide will tell you everything you need to know about the system and how you can get the absolute most out of it. The Qolsys IQ Panel 2 Plus is currently our favorite alarm panel at Alarm Grid, and the easiest way to get started with the system is with one of our complete system kits. Once you have a system kit, you can then easily and conveniently get started with our alarm monitoring service.

Before we start listing off pricing, it is important to understand what comes included in all of our Qolsys IQ Panel 2 Plus PowerG Security System Kits. Each kit features a brand-new Qolsys IQ Panel 2 Plus System, either ten (10) or three (3) DSC PG9303 Door/Window Contact Sensors, and one (1) DSC PG9914 Motion Detection Sensor. This is absolutely everything you need for a basic monitoring setup. The Qolsys IQ Panel 2 Plus even includes a transformer, backup battery, power cable, and table stand, so you will be all good to go right out of the box!

The reason why it is important that the sensors included in these kits are PowerG Sensors is because they offer some of the best wireless range and overall security in the entire industry. PowerG Sensors can communicate with a Qolsys IQ Panel 2 Plus System from up to 2,000 feet away in an open air environment. These sensors utilize military-grade 128-bit AES encryption in all of their wireless communication. This makes them virtually impossible for others to hack or takeover wirelessly. And with the frequency signal hopping of PowerG, these sensors are all but immune to RF jamming attacks that could stop other sensors from working correctly.

Dsc pg9303 wireless powerg door slash window contact

When it comes to our Qolsys IQ Panel 2 Plus PowerG System Kits, there are 12 total options to choose from. This comes from the fact that there are three (3) different versions of the IQ Panel 2 Plus, with each version having a different legacy daughtercard (319.5 MHz, 345 MHz, or 433 MHz). You must also decide whether you want a 3-1 kit (3 PowerG Contacts & 1 PowerG Motion) or a 10-1 kit (10 PowerG Contacts & 1 PowerG Motion). And you have your choice as to whether you want the system's internal LTE cellular communicator to connect with the AT&T LTE Network or the Verizon LTE Network. Doing some simple math (3 x 2 x 2 = 12) shows how we arrive at 12 possible system kits.

The reason why the PowerG Kits were able to be reduced in price is because the DSC PG9303 PowerG Door/Window Contact was also reduced in price. This sensor is a staple in all of our Qolsys PowerG Kits, and it is now more affordable than ever. If you are just looking for a single DSC PG9303 to add to an existing system, you can now get one for the low price of $19.99. This can make an awesome stocking stuffer for anyone with a Qolsys IQ Panel 2 Plus System looking to monitor an additional door, window, or even a cabinet.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

Now that we have all the explaining out of the way, let's take a look at the brand-new reduced pricing for all 12 of our Qolsys IQ Panel 2 Plus PowerG Kits!

Qolsys IQ Panel 2 Plus Power Security System Kit
New Price
Qolsys IQ Panel 2 Plus 319.5 MHz AT&T LTE 3-1 Kit $424.99
Qolsys IQ Panel 2 Plus 319.5 MHz AT&T LTE 10-1 Kit
$537.99
Qolsys IQ Panel 2 Plus 319.5 MHz Verizon LTE 3-1 Kit
$424.99
Qolsys IQ Panel 2 Plus 319.5 MHz Verizon LTE 10-1 Kit
$537.99
Qolsys IQ Panel 2 Plus 345 MHz AT&T LTE 3-1 Kit
$462.99
Qolsys IQ Panel 2 Plus 345 MHz AT&T LTE 10-1 Kit
$576.99
Qolsys IQ Panel 2 Plus 345 MHz Verizon LTE 3-1 Kit
$462.99
Qolsys IQ Panel 2 Plus 345 MHz Verizon LTE 10-1 Kit
$576.99
Qolsys IQ Panel 2 Plus 433 MHz AT&T LTE 3-1 Kit
$462.99
Qolsys IQ Panel 2 Plus 433 MHz AT&T LTE 10-1 Kit
$576.99
Qolsys IQ Panel 2 Plus 433 MHz Verizon LTE 3-1 Kit
$462.99
Qolsys IQ Panel 2 Plus 433 MHz Verizon LTE 10-1 Kit
$576.99

If you have any questions about these kits, or any of the other products on our site, please reach out to us by emailing support@alarmgrid.com. Our support hours for responding to emails run from 9am to 8pm ET M-F. Also remember our holiday hours. We will be closed Tuesday, December 24th, Wednesday, December 25th, and Wednesday January 1st. Also keep in mind that our office will be closing early at 6pm ET on Tuesday December 31st. Have a great weekend and upcoming holiday season, and we look forward to hearing from you soon!

Tags: , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! Today, we're presenting our own guide for installing the Qolsys IQ Panel 2 Plus. This system is very easy to use, and it can be installed by virtually anyone using nothing more than a screwdriver! This is the perfect security system for your home, office, or apartment!

Qolsys iq panel 2 at and t wireless security system with at and Most of the information presented in this post can be found in the Qolsys IQ Panel 2 DIY Installation Manual. You are free to follow along with that manual, which can be found here. We also have three (3) videos that we will include along the way. Feel free to follow along with those as well. All of this information applies to both the original IQ Panel 2 and the newer IQ Panel 2 Plus. With that out of the way, let's get started!

The first thing you will want to do is power on the system. The Qolsys IQ Panel 2 Plus comes with everything you need to get started. Once you have opened up the box, you should locate the panel, the power supply transformer, the power wire, the panel back cover, and the table stand. You will also want to have a screwdriver on hand.


Start by connecting the spade lugs of the power cable to the transformer. The IQ Panel 2 Plus uses DC power, so you must make sure to follow polarity. That means connecting the positive (+) wire and negative (-) wire accordingly. The positive and negative ends on the IQ Panel 2 power cable are marked for this purpose. The positive (+) wire has grey dashes and ends in a red spade connector. The negative (-) wire is solid white without grey dashes and ends in a black spade connector. Make sure that the wires are connected with the proper terminals on the transformer. You can see the positive (+) and negative (-) terminals marked on the transformer. The connection should be nice and snug, but not overly tight.

From there, you can connect the other end of the power cable to the IQ Panel 2 Plus System. There is a simple barrel connection for this purpose. The transformer can then be plugged into a wall outlet. When applying the panel back cover, make sure to run both the power cable and the thin RF receiver cable out from the indentation on the back cover. The back cover should snap nicely into place. The convenient table stand can be installed by putting it into the keyhole slots on the back of the panel and then sliding up. You can power on the system by pressing and holding the side power button until the system LED remains lit.


After the system powers on and boots up, you will be greeted by the Setup Wizard. It is recommended that you go through the Setup Wizard, as it will walk you through the entire setup process. Note that some steps of the Wizard will require you to activate the system for monitoring service. This involves registering the panel's built-in cellular communicator with Alarm.com. This is optional for initial set up. You can always register the cellular communicator with Alarm.com later.

Remember that activating the system is something you will definitely want to do before too long, as that is the only way for it to send out signals to you and/or a central station. Remember that you will need to provide the IMEI Number for the system in order for your monitoring company to activate the cellular communicator. This can be found on a sticker on the back of the panel. It will also be shown as you move through the Wizard.

You will do several things as you go through the Setup Wizard. You will connect the system to a WIFI network, run an initial check for the system, add sensors, perform an initial sensor test, set up the built-in panel glass break sensor, add Z-Wave home automation devices, pair your phone for automatic Bluetooth disarming, pair secondary IQ Remote Keypads, and add system users. Remember that you will want to have a good idea of Sensor Groups when enrolling sensors. You can learn all about the IQ Panel 2 Sensor Groups in this helpful FAQ.


The last thing you will want to do is install your sensors. We only focused on door and window contacts and motion sensors, but many of the same principles apply across any sensor type. What's great about wireless sensors that are used with the IQ Panel 2 Plus is that they can be mounted without drilling holes into the wall or using any power tools. You can safely mount and secure these sensors using double-sided foam tape. Most wireless sensors come with their own double-sided tape for this purpose, or you can buy some off our site!

There are a few general tips when mounting these sensors. When mounting door and window contacts, you should have the magnet on the moving structure of the door or window, and the sensor itself on the door or window frame. Make sure the magnet is aligned with any indication marker shown on the sensor. Also remember to keep the magnet spacing gap in mind. Most Qolsys Door and Window Sensors allow for a magnet spacing gap of up to 0.75 inches.


As for motion sensors, you should have them mounted flat on a wall or corner-mounted. But keep in mind that only a flat-mount will allow you to install without drilling any holes. The motion sensor should be nice and level, and it should be installed at a height between 6 and 8 feet. Qolsys recommends 7.5 feet, which provides the best possible results. The motion sensor should not be facing any windows, vents, or air ducts. It should also not be facing any nearby furniture or stairwells if you have pets!

Most importantly, remember to test ALL your sensors after the final installation!


And that wraps up our Part 1 Guide for installing and using the Qolsys IQ Panel 2 Plus. Look forward to Part 2 coming soon! If you have any questions about the Qolsys IQ Panel 2 Plus or our monitoring service, please reach out to us by emailing support@alarmgrid.com. Remember that our support hours are from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! Today, we wanted to let you know about some of the new security system kits that are available from the Alarm Grid website. We have new kits that feature the Resideo Lyric, the Qolsys IQ Panel 2 Plus (319.5 MHz, 345 MHz, and 433 MHz), the 2GIG GC3e and the 2GIG GC2e Systems.

Honeywell lyricpk10 lte enc encrypted at and t lte alarm system

Our system kits are perfect for anyone just getting started with alarm monitoring service. Each one includes a brand-new alarm panel, some door and window sensors, a motion sensor, an LTE cellular communicator, and a power cable. You can easily expand around any of these systems later on if needed. Just remember that you will need a monitoring plan to use one of these systems with Alarm Grid. A Gold Plan or higher is needed for cellular communication.

Now that you know a little bit about our kits, let's take a look at each new one individually:

Resideo Lyric w/ Verizon LTE Communicator Kits

Lyric Verizon-LTE 3-1 Kit


Lyric Verizon-LTE 10-1 Kit

  • Lyric System
  • LYRICLTE-V Verizon LTE Communicator
  • 10 Versa-2GIG Contacts
  • SiXPIR Motion
  • LT-Cable


Lyric Verizon-LTE 3-1 Encrypted Kit


Lyric Verizon-LTE 10-1 Encrypted Kit

  • Lyric System
  • LYRICLTE-V Verizon LTE Communicator
  • 10 SiXMINICT Contacts
  • SiXPIR Motion
  • LT-Cable


Qolsys IQ 319.5 MHz PowerG Kits

IQ Panel 2 319.5 MHz AT&T LTE 3-1 Kit


IQ Panel 2 319.5 MHz AT&T LTE 10-1 Kit
  • IQ Panel 2 Plus 319.5 MHz w/ AT&T LTE
  • 10 PG9303 PowerG Contacts
  • PG 9914 PowerG Motion


IQ Panel 2 319.5 MHz Verizon LTE 3-1 Kit


IQ Panel 2 319.5 MHz Verizon LTE 10-1 Kit
  • IQ Panel 2 Plus 319.5 MHz w/ Verizon LTE
  • 3 PG9303 PowerG Contacts
  • PG 9914 PowerG Motion


Qolsys IQ 345 MHz PowerG Kits

IQ Panel 2 345 MHz AT&T LTE 3-1 Kit


IQ Panel 2 345 MHz AT&T LTE 10-1 Kit

  • IQ Panel 2 Plus 345 MHz w/ AT&T LTE
  • 10 PG9303 PowerG Contacts
  • PG 9914 PowerG Motion


IQ Panel 2 345 MHz Verizon LTE 3-1 Kit


IQ Panel 2 345 MHz Verizon LTE 10-1 Kit

  • IQ Panel 2 Plus 345 MHz w/ Verizon LTE
  • 10 PG9303 PowerG Contacts
  • PG 9914 PowerG Motion


Qolsys IQ 433 MHz PowerG Kits

IQ Panel 2 433 MHz AT&T LTE 3-1 Kit


IQ Panel 2 433 MHz AT&T LTE 10-1 Kit

  • IQ Panel 2 Plus 433MHz w/ AT&T LTE
  • 10 PG9303 PowerG Contacts
  • PG 9914 PowerG Motion


IQ Panel 2 433 MHz Verizon LTE 3-1 Kit


IQ Panel 2 433 MHz Verizon LTE 10-1 Kit

  • IQ Panel 2 Plus 433 MHz w/ Verizon LTE
  • 10 PG9303 PowerG Contacts
  • PG 9914 PowerG Motion


2GIG GC3e Kits

2GIG GC3e Verizon-LTE 3-1 Kit


2GIG GC3e Verizon-LTE 10-1 Kit

  • 2GIG GC3e System
  • 2GIG LTEV-1-A-GC3 Verizon LTE Communicator
  • 10 2GIG DW10e Door and Window Sensors
  • 2GIG PIR1e Motion
  • LT Cable


2GIG GC2e Kits

2GIG GC3e Verizon-LTE 3-1 Kit


2GIG GC2e Verizon-LTE 10-1 Kit

  • 2GIG GC2e System
  • 2GIG LTEV1-A-GC2 Verizon LTE
  • Communicator
  • 10 2GIG DW10e Door and Window Sensors
  • 2GIG PIR1e Motion
  • LT Cable


All of these great kits are available from Alarm Grid right now. If you have any questions or need help choosing a system, please email us at support@alarmgrid.com. You may also call us during our regular business hours of 9am to 8pm EST M-F. We look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments