Qolsys IQ Panel 2 Plus Posts

Posted By

We have recently been made aware that the maximum range for the DSC 915 MHz PowerG Sensors is only 2,000 feet in open air when used with the IQ Panel 2 Plus. This is quite shorter than the 2 kilometer maximum range when these same sensors are used with DSC PowerSeries Neo Alarm Systems.

Qolsys iq panel 2 at and t wireless security system with at and Through testing, we have determined that the range of PowerG Sensors is noticeably shorter when they are used with a Qolsys IQ Panel 2 Plus instead of with a DSC PowerSeries Neo. This is likely due to the smaller antenna that is featured on the IQ Panel 2 Plus System. On a DSC PowerSeries Neo System, the sensors can achieve their advertised wireless range of up to 2km in open air. But the IQ2+ offers a considerably smaller wireless range, even with clear line of sight. The maximum range for a PowerG Sensor used with an IQ Panel 2 Plus is no more than 2,000 feet. This is much less than 2km. We also do not recommended trying to use the Power Sensors with an IQ2+ beyond 500 feet away in practice. This is especially true if many obstacles and walls are present.

Previously, we produced content that led some customers to believe that the maximum range of these sensors was 2km when used with the IQ2+. We have since learned that this is not the case, and we have adjusted our old content accordingly. These changes apply to all versions of the IQ Panel 2 Plus, regardless of which legacy daughtercard or cellular communicator is used. We apologize for any inconvenience that this may have caused for our customers.

The only way these sensors can support a 2km signal range is when they are used with a DSC PowerSeries Neo System. These systems feature more powerful antennas that can allow these sensors to achieve their maximum possible distance. Alarm Grid does not sell any PowerSeries Neo Systems at this time, but we do offer compatible Alarm.com cellular communicators that allow us to takeover these systems.

That being said, 2,000 feet of open air range is still extremely impressive for any alarm system. Even customers with the largest of homes and should be able to utilize these sensors as they see fit. And if the range still isn't enough, a PowerG wireless repeater can be used to effectively double the range. This will boost it to more than 1,000 feet when used in most homes and up to 4,000 feet when used with an IQ Panel 2 Plus in open air!

Additionally, we've found that these sensors cannot auto-enroll with an IQ Panel 2 Plus like most other compatible sensors. Instead, the Serial Number for the sensor must be manually entered. For the PowerG Sensors, this is called the "DL ID", and it can be found on the sensor's box. The user must also set the Source Signal to reflect that of PowerG. Please keep this in mind when enrolling a PowerG Sensor with an IQ Panel 2 Plus Alarm System.

UPDATE: We have since learned that you can auto-enroll PowerG Sensors with the IQ Panel 2 Plus. This post explains the process.


If you have any questions about the IQ Panel 2 Plus or DSC PowerG Sensors, please do not hesitate to reach out to us. You may email us at any time at support@alarmgrid.com, or you can call us from 9am to 8pm EST M-F at 888-818-7728. We look forward to helping you with your security needs!

Tags: , , , , , ,

Comments


Posted By

Hi DIYers! As you know, we love the Qolsys IQ Panel 2 Alarm System. It is definitely one of the most robust and advanced security systems available on the market today. But a feature that is sometimes overlooked is the built-in glass break sensor that is integrated with the system.

Qolsys iq panel 2 at and t wireless security system with at and The Qolsys IQ Panel 2 internal glass break sensor functions in basically the same manner as any other standalone glass break sensor. It will actively listen for the sound of breaking glass and trigger an alarm if it detects this type of sound while the system is armed. This is great for monitoring a window in case an intruder tries to break-in. Both the standard Qolsys IQ Panel 2 and the new Qolsys IQ Panel 2 Plus Systems contain this sensor.

The sensor must be activated from within the Installer Settings menu in order for it to be used. The internal glass break sensor is essentially treated as a wireless zone by the system. Once activated, the internal sensor will count towards the system's 128 available wireless zones. A user may want to keep this in mind if they use an extremely large number of sensors with their IQ Panel 2 System.

For the best possible detection, there should be no obstacles between the system and the window. The recommended distance between the panel and the window is from 3 to 15 feet. The internal glass break sensor will only be active when the system is armed and receiving power from its plug-in DC transformer. Depending on the sensor's programming settings, a user can set the glass break sensor to be active when the system is set to Arm Away only or both Arm Away and Arm Stay. Both "Low" and "Normal" Sensitivity options are available.

Both the IQ Panel 2 and IQ Panel 2 Plus Systems with an integrated glass break detector can be purchased from the Alarm Grid website. Protect your home or business with one of the world's best alarm systems!

Tags: , , , , , , , , , , , ,

Comments


Posted By

An exciting new feature is now available for users of the Qolsys IQ Panel 2. It is now possible to view the live video feed for Alarm.com Cameras directly from the panel itself. This is made possible through firmware update 2.2.1, which can be easily downloaded to the IQ Panel 2 System.

Qolsys iq panel 2 at and t wireless security system with at and The feature is compatible with both the IQ Panel 2 Plus and the standard IQ Panel 2 System. There are a few things to keep in mind about the live video feature. First, the panel must be connected to an active WIFI network in order for the feature to work. If the WIFI goes down, the panel will be unable to stream live video.

Second, the feature only works with compatible Alarm.com Cameras. Some cameras will allow the IQ Panel 2 to stream both video and audio, while others are for video only. The compatible cameras are listed below:

Note: The ADC-V521IR needs Firmware IP8137-ALAM-0100d1 or higher for two-way audio. The ADC-V522IR Must be Hardware Version 0101 with Firmware IP8168-ALAM-0100b9 or higher for two-way audio.

Additionally, the cameras below are for video only:

Third, a user will need to have an alarm monitoring plan that supports video. For Alarm Grid customers, these are the Platinum Level Plans. For two-way audio, the feature "Audio for Non-Doorbell Cameras" must be enabled on the user's Alarm.com account.

Remember, Firmware Version 2.2.1 is needed on the IQ Panel 2 System to support this feature. The IQ Panel 2 Plus should arrive with this firmware update already applied. But the standard IQ Panel 2 may need to have the firmware update applied. The panel should be connected with a WIFI network, have its transformer plugged-in and have a charged battery before performing the update to the system. If you need to upgrade the firmware, complete the following steps first:

1. Access the upgrade menu. Start from the home screen of the Qolsys IQ Panel 2. Press the small grey bar at the top. Choose Settings > Advanced Settings > Enter Installer Code (default 1111) > Upgrade Software. This will take you to the upgrade menu.

2. Provide the Patch Tag. Press "Patch Tag". Then enter in "iqpanel2.2.1". Press OK. This will provide the Patch Tag associated with the update.


3. Perform the update. Click "Upgrade Using Network". The update should begin to install. Press OK when prompted. The panel should reboot, and the update will be applied. This will take about five minutes. The home screen should be displayed once the update has been successfully applied.

Next, the feature must be enabled for the IQ Panel 2. This is done from Alarm.com. Login to Alarm.com website. Then choose the "Video" option on the left, followed by "Settings" at the top. Then choose "Stream Video to Security Panel Screen". Every compatible camera will have an "Authorize" toggle switch that must be selected to be used with this feature. Once all the cameras have been enabled, you can log-out of Alarm.com.

Finally, you can try streaming the live video feed from your Qolsys IQ Panel 2. Swipe left on the screen until you reach the "Live Video Cameras" page. Find the camera you want to view, and press the Play button. The panel will begin streaming the live video of the camera.

Firmware Version 2.2.1 also provided some other fixes and changes for the IQ Panel 2. These include:

  • Improved reliability and performance for Live Answer and Live View features
  • Filtering out unneeded "Motion Activated" messages sent from Alarm.com
  • Corrects a Chime and Voice problem that resets settings to "Nighttime Mode" after performing a Software Update
  • Corrects an issue where extra zones numbered 130 - 136 could be present on Alarm.com
  • Corrects a problem where the panel was reporting cellular strength signals when disconnected fro the network

If you have any questions about this new feature, please reach out to us at support@alarmgrid.com. Or call us at 888-818-7728 from 9am thru 8pm Monday thru Friday. We hope you enjoy using the video feature with your IQ Panel 2!

Tags: , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! Today we are extremely pleased to announce that the brand-new Qolsys IQ Panel 2 Plus Security Systems are here! Three different versions of the system are currently available on the Alarm Grid website. This is truly very exciting news, as we are sure you will love these systems.




With the IQ Panel 2 Plus, Qolsys has raised the bar for wireless all-in-one Alarm Systems. These are definitely some of the most robust and powerful panels we have ever offered from Alarm Grid. Currently, there are three versions of the system available:

All of the IQ Panel 2 Plus Systems provide support for the top-of-the-line PowerG Wireless Sensors. These sensors operate at 915 MHz, and they can be used from up to 2,000 feet away from the IQ Panel 2 Plus in open air. This will allow users to setup their sensors from virtually anywhere on the property, regardless of where their alarm system is located. The sensors are also protected by 128-bit AES encryption, making them nearly impossible to be hacked or taken over by others. These are definitely some of the most versatile and secure alarm sensors that we have ever encountered.

In addition to PowerG, each IQ Panel 2 Plus System will provide support for a sensor lineup at a lower wireless frequency. There are three different "flavors" that a user can choose from. These are support for 319 MHz Qolsys Sensors and Interlogix/GE Sensors, 345 MHz Honeywell 5800 Series Sensors and 2GIG Sensors, and 433 MHz legacy DSC Sensors. The 319 MHz and 345 MHz options are already available, and the 433 MHz option should be available soon. Also note that a Verizon LTE version of the 345 MHz sensor option should also be arriving in the near future.



Every IQ Panel 2 Plus System comes with a built-in WIFI card and an LTE cellular communicator. This will provide an immediate dual-path communication setup for the system. The only thing that an end user will need is an appropriate alarm monitoring plan. If either path ever goes down, the IQ Panel 2 Plus will still be able to use the other communication path and remain monitored. Both AT&T and Verizon LTE options for cellular monitoring are available.



The Qolsys IQ Panel 2 Plus has also made great strides in video surveillance. Users can view the live feed for their Alarm.com Security Cameras right from the panel itself. And Qolsys worked to better-integrate the system with the SkyBell Doorbell Cameras. Now, a users can answer their SkyBell doorbell from their panel. They can even have a live conversation with the person at their door from their IQ Panel 2 Plus! This is also possible for any ADC Camera that supports two-way voice.

The IQ Panel 2 Plus also supports a plethora of other features. These include Bluetooth disarming, an integrated glass break detector, a built-in 5MP camera, an integrated Z-Wave Plus Controller and an easy-to-use setup wizard for getting started with the system. All of this makes the IQ Panel 2 Plus one of the best systems we have ever had the pleasure of using.



The Qolsys IQ Panel 2 Plus is available from Alarm Grid now. If you have any questions, please feel free to contact us at support@alarmgrid.com, or call us at 888-818-7728 from 9am to 8pm EST Monday through Friday. We hope that you will enjoy this system as much as we do, and we look forward to hearing from you!

Tags: , , , , , , , , , , ,

Comments