Qolsys IQ Panel 2 Plus Verizon LTE, Interlogix/GE Compatible Posts

Posted By

Alarm Grid has learned that Qolsys has uncovered some issues with their current Z-Wave firmware (6.81.03) for the IQ Panel 2 and IQ Panel 2 Plus. They are currently working on a new patch tag update to replace 6.81.03. However, the new update patch has not yet been made available.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

Qolsys released Z-Wave Firmware Update 6.81.03 to provide the IQ Panel 2 with the Smart Start feature and to upgrade the system's Z-Wave security protocol to S2. Alarm Grid previously covered the 6.81.03 Z-Wave Firmware Version in this prior blog post. Our post specifically focused on the Smart Start feature, but it did provide information on the required Z-Wave firmware version.

Unfortunately, there have been compatibility issues between Z-Wave Firmware 6.81.03 and various Z-Wave devices. The only device that we know for sure has experienced issues with the system is the August Smart Lock Pro. But it is certainly possible that other Z-Wave devices may be affected. We have also confirmed that the August Smart Lock Pro will work fine on IQ2 Systems that have not yet had the 6.81.03 Patch applied.

With the issue in mind, we recommend NOT upgrading to Z-Wave Firmware Version 6.81.03. In fact, Qolsys has removed the 6.81.03 Patch Tag from their servers, making it virtually impossible to apply this update. But if you were planning to apply the update using a different method, such as an SD card, please do not proceed with that action. Just hang tight on the current Z-Wave firmware until the new patch is available.

We also understand that many people have already applied the 6.81.03 Patch. We are disappointed to say that there is no way to "roll-back" or "downgrade" the Z-Wave Firmware to an older version. We apologize for any inconvenience that this may cause. But it is our understanding that most Z-Wave devices should not experience any problems on 6.81.03. If your Z-Wave network is still working as normal, then you should have nothing to worry about.

Alarm Grid does not currently have an ETA on when the new Z-Wave patch tag will be made available. However, we expect that it will be fairly soon. Qolsys is usually very quick and diligent about rolling these things out, and we're sure it is a top priority for the. We will post an update blog after the update has been made available. We then recommend upgrading your system's Z-Wave firmware to the new version as soon as you can.

If you have any questions about the Qolsys IQ Panel 2 or its Z-Wave firmware versions, you can reach us for support@alarmgrid.com. That email is also great if you are interested in starting new monitoring service. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , , , , , ,

Comments


Posted By

After our big return last week, we're back in a major way with 12 new videos this week! As our headquarters has only partially reopened, I had to try doing some videos again. But a familiar face has returned. We're sure you're eager to see who. Anyway, here come the new Alarm Grid videos!


Adjusting Z-Wave Device Limits On My Qolsys IQ Panel 2 Plus

I show you how to adjust the Z-Wave device limits on your Qolsys IQ Panel 2 Plus Security System. The Z-Wave device limits determine how many of each Z-Wave device type you can pair with the system. There are limits for thermostats, smart sockets, door locks, lights, garage doors, and "other" Z-Wave devices. The maximum total limit for all devices combined is 152 Z-Wave devices. You will need the Installer Code or Dealer Code (default 1111 and 2222, respectively) to change these limits. Also note that the Z-Wave device limit for Alarm.com is 122 Z-Wave devices.


Upgrading the Z-Wave Firmware for My Qolsys IQ Panel 2 Plus?

I show you how to upgrade the Z-Wave firmware for a Qolsys IQ Panel 2 Plus System. This is something you may want to do if the system is running a Z-Wave firmware of less than 6.81.03. At that Z-Wave firmware, you unlock the Smart Start feature for quickly adding Z-Wave devices, and you upgrade the system to the S2 security protocol for automation devices. Any Qolsys IQ Panel 2 manufactured with System Firmware Version 2.4.0 or higher (upgrading later doesn't count) will already have this Z-Wave Firmware Version.


Overview of the Smart Start Feature on the Qolsys IQ Panel 2 Plus

I talk about the Smart Start feature that can be used with any Qolsys IQ Panel 2 that is running Z-Wave Firmware Version 6.81.03 or higher. The Smart Start feature allows you to pair Z-Wave devices by scanning a QR code, instead of performing a traditional inclusion/exclusion process. As of June 2020, only a very limited selection of Z-Wave devices from Qolsys, Alarm.com, Eaton, and Danalock are compatible with the feature. But it can save you time if adding a large number of Z-Wave devices.


Using the Smart Start Feature on the Qolsys IQ Panel 2 Plus

I show you how to use the Smart Start feature on a Qolsys IQ Panel 2 Plus to add new Z-Wave devices. If your IQ Panel 2 is on Z-Wave Firmware Version 6.81.03 or higher and you have a compatible Z-Wave device, then you can use the Smart Start feature to add it to the Z-Wave network. Depending on the Z-Wave device, the QR code may be on the packaging or on the device itself. Some may have the code on both the packaging and the device.


How Many Z-Wave Devices are Supported on the 2GIG GC2 or GC2e?

I discuss the Z-Wave device limits for the 2GIG GC2 and the 2GIG GC2e. The classic GC2 has a standard Z-Wave controller, while the newer GC2e has an upgraded Z-Wave Plus controller. Both support the same Z-Wave devices, though Z-Wave Plus devices will get an extended range and battery life when used with the GC2e. The Z-Wave device limit for both systems is 232 Z-Wave devices, though it should be considered that adding a very large number of Z-Wave devices can diminish system performance.


How Many Z-Wave Devices are Supported on the 2GIG GC3 or GC3e?

I discuss the Z-Wave device limits for the 2GIG GC3 and 2GIG GC3e. Both of these systems have built-in Z-Wave Plus controllers for building an automation network of smart devices. Just like the "lower-end" 2GIG Systems, the GC3 and GC3e can support a maximum of 232 Z-Wave devices, though usually far fewer are actually used in practice. You should also keep in mind that Alarm.com has its own Z-Wave device limit of 122 devices. This means that only the first 122 Z-Wave devices paired with the system will get pushed over to Alarm.com.


Excluding the Kwikset Z-Wave Lock from the Lyric Controller

I show you how to exclude a Kwikset Z-Wave Lock from a Z-Wave network using a Honeywell Lyric Alarm System. Clearing the lock from the network will wipe out all of its residual Z-Wave data. This is normally done before adding the lock to the Z-Wave network, or when you need to delete it from the system. The Lyric can be used to clear the Z-Wave network data in the lock, even if the lock wasn’t paired using the Lyric to begin with.


Including the Kwikset Z-Wave Lock from the Lyric Controller

I show you how to pair a Kwikset Z-Wave Lock with your Honeywell Lyric Alarm System. This will allow you to control the lock from the panel and remotely from Total Connect 2.0 if the system is monitored and set up with the service. Normally, an exclusion process is performed before the inclusion process. Most Kwikset Locks have a simple button that is used for including and excluding. Pressing this button while the system is in its inclusion mode will include the lock into the Z-Wave network.


Excluding a Schlage Z-Wave Lock with the Honeywell Lyric

I show you how to exclude a Schlage Z-Wave Lock from a Z-Wave network using the Honeywell Lyric Alarm System. Just like most other Z-Wave devices, an exclusion process is normally performed either before adding the device to the Z-Wave network, or when deleting the device from the Z-Wave hub. For a Schlage Lock, you must access the programming code that is found on a white sticker underneath the lock's main cover. You will need a screwdriver to remove this cover.


Including a Schalge Z-Wave Lock with the Honeywell Lyric

I show you how to include a Schlage Z-Wave Lock to the Lyric's Z-Wave network. A Schlage Lock will follow the same process for inclusion as it does for exclusion. However, you will normally want to exclude the lock first to wipe out any residual Z-Wave data. To include the lock, simply enter the programming code on the lock's sticker, followed by the [0] key while the Lyric System is in the appropriate Z-Wave inclusion mode.


Enrolling a Z-Wave Lock to My Qolsys IQ Panel 2

In his triumphant return, the always fantastic Jorge shows you how to enroll a Z-Wave door lock to your Qolsys IQ Panel 2 System. This is done by putting the IQ Panel 2 into its Z-Wave inclusion mode and then activating the inclusion function on the lock. For most locks, you will want to clear the lock from the network to wipe its residual Z-Wave data before completing the inclusion process. The lock can then be controlled from the panel, as well as from Alarm.com if the system is monitored with access to the service.


Resetting an Interlogix Simon XT to Factory Defaults

This is an update from a previous video shot more than a year ago. Jorge shows you how to reset an Interlogix Simon XT System back to its factory default settings. This will reset the Master Code (1234) and the Installer and Dealer Codes (both 4321), delete any added codes and system zones, and restore all settings and configurations to their default values. It is important to note that if the option for "Phone Lock" in system programming is enabled, then certain settings will not be affected by the default.

Tags: , , , , , , , , , , , , , , , , , ,

Comments


Posted By

With Father's Day right around the corner (Sunday, June 21st), we thought it'd be a good time to suggest some security and automation gifts to surprise the dad in your life. You don't need to get your dad another neck-tie this year. We've got some neat gifts that dad is sure to love!


The Gift of Security!

If dad doesn't have a security system yet, then he's really missing out. You can have peace of mind in knowing that his home is safe while he's out doing dad stuff like golfing, fishing, or going to a bbq. Maybe your dad thinks he doesn't need security? Well, you could remind him of a big fat insurance discount that he could get by getting his home monitored. That will excite him even more than a weekend trip to the hardware store.

We have lots of great panels available, though the most popular right now are the Honeywell Lyric and the Qolsys IQ Panel 2 Plus. These are both wireless panels that are very easy to set up, even for the dad who doesn't know his way around a tool-kit. You won't hear any swear words coming out of the work shed when dad goes to set up his new system. And he'll probably want to show it off to all the neighbors.

Honeywell lyric controller encrypted wireless security system


Shopping on a Budget?

Okay, totally understand if you're strapped for cash and can't drop a few hundred dollars on a brand-new security system. But just because you're looking to spend $30 rather than $300 doesn't mean you can't make dad smile. If your dad already has a system, then why not get him a new sensor or two? Door and window contacts are always affordable. Just get a model that works with dad's security system. The VERSA-2GIG and the VERSA-GE are both extremely popular, and they won't break the bank!

Maybe you've already surprised dad with a contact sensor before? You could always check out some motion sensors. These are great for knowing if someone is snooping around the basement or the garage. Again, you want to make sure you get a model compatible with dad's system. Popular options include the Honeywell SiXPIR, the 2GIG PIR1-345, and the DSC PG9914. And if you aren't sure which models will work with your dad's system, just reach out to us, and we'll be happy to help!

2gig pir1 345

Automation Excitement!

If dad already has a wireless system, then chances are that it doubles as an automation controller. You can surprise dad with some new Z-Wave automation devices for him to pair with his system. Lighting devices are always a great choice. Your dad will be able to turn the lights ON and OFF without getting up, and he can create smart scenes for automatic control. And a great thing about smart lights - they don't break the bank!

Your dad might like an in-wall switch as a nice weekend installation project. Some of our favorite in-wall switches include the GE 14318 and the Resideo Z5SWITCH. Or if your dad is not into wiring, you can get him a plug-in lamp module like the GE 28170 or the Resideo Z5DIMPID. And the great thing about these Z-Wave devices is that they are universally compatible and will work with any system that operates as a Z-Wave controller!

Maybe the smart lighting game has already been introduced to dad's house? In that case, you could make his day with a different automation device like a Z-Wave thermostat. Our favorites right now are the Honeywell T6 PRO and the Alarm.com ADC-T3000. Or if you really want to get your dad something a little more unique, then you could try a smart water valve like the Alarm.com ADC-SWV100. This can be very useful in preventing dad from experiencing the headache of a flooded basement or laundry room.

Ge 28170 side of z wave plug in smart dimmer

Help Dad Keep an Eye on the Neighbors

We all know that dads like to know what's going on outside. That is why we'd be foolish not to recommend some outdoor security cameras. These devices are actually easy to install, and they can give your dad a good look at the front lawn while he's tucked away in his man cave. You'll want to consider whether his system supports Alarm.com or Total Connect 2.0. For ADC, we like the Alarm.com ADC-V723. If dad has TC2, then go with the Honeywell IPCAM-WOC1.

Maybe dad isn't ready to upgrade to video monitoring quite yet? Don't worry! He can still make sure the neighbor kids stay off the lawn with a different type of camera. One popular option is to use a SkyBell Video Doorbell. These can be used without needing to upgrade to a full-on video monitoring plan. There are models for Total Connect 2.0, and others for Alarm.com. Another possibility is to look into the Arlo Cameras that do not use monitoring service through ADC or TC2.

Honeywell lyric oc1 standalone wifi outdoor 1080p hd total conne

The Best Gift of All!

We've saved the best gift idea for last. It isn't something you can hold in your hand, but it's something that every dad will love, even if they have all the security gadgets under the sun. That is the gift of alarm monitoring service! Why not offer to cover dad's monitoring bill for the next year? That is truly the gift that keeps on giving. Talk it over with dad, and when you're ready, the two of you can contact us to make the arrangements. We'll charge your card every month, with no added fees or sudden surprises. Meanwhile, your dad will be able to spend his money on other important things like new golf clubs or something. Oh dads....

If you haven't already, make sure to check out our monitoring page. This will teach you about the different plans offered from Alarm Grid so that you can choose the perfect one for your dad's needs. Once you're ready, shoot us an email at support@alarmgrid.com or call us at (888) 818-7728 to set things up. Remember that our business hours run from 9am to 8pm ET M-F. Our team will be thrilled to help you give your dad the gift of home security! We look forward to hearing from you!

Alarm grid inside security stickers

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

One feature on the Qolsys IQ Panel 2 Plus that we have never discussed before is the Smart Start feature. This feature is used for conveniently enrolling compatible smart home automation devices by scanning a QR code. It is a nice alternative to the traditional inclusion process.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

The Smart Start feature was quietly included back in Qolsys IQ Panel 2 System Firmware Version 2.4.0. As it is a relatively minor feature, it was largely overlooked, and we never covered it in great detail. If your Qolsys IQ Panel 2 Plus had System Firmware Version 2.4.0 or higher installed when it was brand-new, then it already has the Smart Start feature. If the system was running a lower firmware version when brand-new, then you need to upgrade the Z-Wave firmware for the system to unlock the feature. Upgrading the system firmware will not automatically update the Z-Wave firmware and provide access to the Smart Start feature. We wrote a comprehensive FAQ on upgrading the Z-Wave firmware on a Qolsys IQ Panel 2 Plus, which you can view here.

The required Z-Wave firmware version for using the Smart Start feature on the Qolsys IQ Panel 2 is Z-Wave Firmware Version 6.81.03. In addition to providing access to the Smart Start feature, upgrading to this Z-Wave firmware version will also upgrade the Z-Wave security protocol for the system to S2. This protocol is more advanced and offers better security than the Z-Wave security protocol previously used with the system. You won't notice any real changes with the S2 protocol, but it is still a nice addition.

UPDATE: Qolsys has identified issues affecting IQ Panel 2 Z-Wave Firmware Version 6.81.03. They are currently working on a new Z-Wave firmware version to fix these issues. But as of July 2020, the new Z-Wave firmware version is not yet available.

Before we continue any further, we do want to stress that updating the Z-Wave firmware for an IQ Panel 2 System is completely, 100%, optional. This isn't nearly as important as updating the system firmware to the latest version. We mention this fact because updating the system's Z-Wave firmware often requires clearing all of the Z-Wave devices from the network and then re-adding them once the update is complete. This can be extremely inconvenient if you have a large Z-Wave network. And since all you're really doing here is gaining access to the Smart Start feature and making a slight improvement to the security for your automation network, we totally understand if you just decide to skip this process. Also note that you can attempt the updating process without clearing your Z-Wave network first. It's just that this may result in errors that can only be solved by ultimately clearing the network and then re-adding the devices. You should only clear the network and re-add the devices if devices that were working fine previously are later giving you issues after the update.

Note: We have noticed issues when using the August Smart Lock Pro with a Qolsys IQ Panel 2 System running a Z-Wave Firmware Version of 6.81.03. If you intend on using the August Smart Lock Pro with a Qolsys IQ Panel 2, then do NOT upgrade the panel Z-Wave firmware! This is expected to be fixed in a future Z-Wave firmware release.

If we haven't scared you away yet, let's take a look at the feature! Once your IQ Panel 2 is running a high enough Z-Wave firmware version, you will find the SMART START icon within the Z-Wave Devices Menu of Installer Programming. This menu is accessed by clicking the small grey bar at the top of the main screen and choosing Settings > Advanced Settings > enter Installer Code (default 1111) > Installation > Devices > Z-Wave Devices > SMART START.

Choosing SMART START will cause the panel to pull up the front camera for the IQ Panel 2. There will be a red square inside which you will position the QR code for the device. The QR code can be found either on the device itself or on its packaging. Simply position the QR code inside the red box, and the system will begin scanning.

Once the scan is successful, powering up the Z-Wave device will complete the setup process automatically. And just like that, you have saved yourself the trouble of performing the traditional exclusion/inclusion process for adding a new Z-Wave device. Petty cool!

At this time, the list of devices that can be added in this way is still very small. Here is the current list of devices that we know work with the feature:

For even more information regarding the Qolsys IQ Panel 2 Plus Smart Start feature, we strongly recommend checking out this comprehensive FAQ we wrote on the feature. It will tell you pretty much everything you would want to know about using Smart Start on the IQ Panel 2.

If you have any additional questions about the Smart Start feature or the Qolsys IQ Panel 2 Plus, including the system's Z-Wave firmware version, please email us at support@alarmgrid.com. This email is also great if you want to contact us about starting monitoring service. Our team checks email from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , , ,

Comments


Posted By

We have recently noticed a major shift in the security industry due to the COVID-19 health pandemic and the resulting "new normal". Many companies that were traditionally opposed to the DIY model are now following our lead and implementing their own DIY practices to meet consumer needs.

Honeywell lyricpk lte enc encrypted at and t lte alarm system w There are many names for this rising practice. Some companies will call it "Do-It-Together" or "Do-It-With-Me" as an alternative to "Do-It-Yourself". But it's all the same principle. And it isn't anything new, even if other companies want you to believe that they are being innovative. Alarm Grid has been proudly offering DIY monitoring solutions since 2012. And only a very small handful of other companies have been providing similar solutions for the past several years. It wasn't until this "new normal" that DIY security even became the standard model.

Whether a security company calls their model DIY, DIT, or DIWM, it's all the same thing. They all refer to a company guiding an end user through the setup or installation process remotely through a phone call, text chat, or video call. The main principle behind this concept is that a modern security system is not difficult to install, and end users shouldn't have to pay hundreds or even thousands of dollars for an installation that they can easily complete on their own. The end user is empowered in being in full control of their security system, and the alarm company saves money by not having to send out a professional installer. Everybody wins.

For a long time, traditional security companies and equipment manufacturers stubbornly stood their ground and refused to adopt this new model. They continued hiding Installer Codes and making their systems difficult and frustrating for end users to work with. This allowed them to keep rolling trucks and charging their customers service fees. We have seen some improvements in this regard. For example, the Qolsys IQ Panel 2 Plus is arguably the most DIY-friendly alarm panel we have ever seen. But for the most part, this industry has been slow to take action. It's somewhat shocking that it took something like a serious global health pandemic to implement these changes.

But Alarm Grid has been doing this before it became the norm. We have never sent out an in-house technician to anyone's home or business. Why? Because we never needed to. These systems can be self-installed, and our trained and knowledgeable technicians provide all the support you need, both online and over the phone. Being ahead of the curve has allowed Alarm Grid to establish a successful and thriving business in the highly competitive security industry. And we intend on keeping it that way, even during these trying times.

While most other security companies were left scrambling for solution that has been right under their noses for quite some time, Alarm Grid was already adapted for the global pandemic. The only change we made was mandating that the vast majority of employees work from home. And even that is only temporary, as we plan on returning to the Alarm Grid headquarters once we feel that it is safe. But other than that, it has been business as usual for Alarm Grid. We have continued to keep our customers informed, and we have continued providing simple and effective security solutions.

Other companies that are just now implementing DIY practices during this historic event are not being innovative. They are fighting for survival. We have been doing this for nearly eight years. And each year, more and more people jump ship to Alarm Grid. Customers love us for our top-notch support, our contract-free structure and our no nonsense attitude, where our only goal is to provide you with excellent monitoring service at a price that you can afford. We have been right about this industry this entire time, and other companies are only just now realizing it as a means of survival.

Remember that customers stick with Alarm Grid because they love our support and our efficient business model. Any customer that is not satisfied for whatever reason is free to take their system with them to a new company. All of the security systems we support are non-proprietary, and they can be readily used with virtually any alarm company. But we rarely have customers leave us, as we are always there to help them overcome any problems that they may encounter.

If you are interested in learning more about Alarm Grid, the original DIY security company, we invite you to send an email to support@alarmgrid.com. We would love to help you explore your options so that you can make an informed buying decision for your home or business. Also, make sure to check out our monitoring page so that you can learn all about our monitoring plans. If you'd prefer to call us, we can be reached at (888) 818-7728. Our team is available and ready to talk from 9am to 8pm ET M-F. We look forward to hearing from you soon!

Tags: , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Do you want to achieve a hybrid security system that uses both wireless and hardwired wired sensors? We have the perfect solution for you in the Qolsys IQ Panel 2 Plus and the Qolsys IQ Hardwire 16-F. This will let you use both wired sensors and wireless sensors with one convenient system!

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

Although we are well into the age of wireless security systems, there is still a place for hardwired sensors. Many people install wired sensors for new construction as a way of fully integrating their security system with their home or office. This is a great way to increase property value, and it's a fairly simple task for a builder to accomplish.

In addition, hardwired sensors require less maintenance than wireless sensors. They do not need any battery replacements, and many do not draw any electricity from a panel or wired to wireless converter module. Also, more and more alarm system manufacturers are offering ways to integrate hardwired sensors in with wireless panels. Using wired and wireless sensors together on the same system is sometimes referred to as a "hybrid security system".

The advantage to using a hybrid alarm system with both wired and wireless sensors is that you can still integrate your wired sensors in with the building, while also being able to easily add wireless sensors when convenient. It can be challenging to run wire for hardwired sensors after a building has been constructed. If you need to add some quick new sensors, then wireless ones make for a great selection. They are super easy to install, and they are just as reliable as wired sensors. Also, there are many sensors out there that are only available in wireless varieties.

The 319.5 MHz IQ Panel 2 Plus is a great option for those looking to set up a hybrid security system, as it readily supports DSC PowerG Security Sensors and has a great wired to wireless converter option in the Qolsys IQ Hardwire 16-F. If you aren't familiar with PowerG Sensors, they offer some of the best range in the industry, as they can be used from up to 2,000 feet away from the IQ Panel 2 Plus. The PowerG Sensors are also extremely secure, since they utilize 128-bit AES encryption and Frequency Hopping Spread Spectrum (FHSS) Technology. These are some of the best wireless sensors that you can possibly use with a security system.

But how do you integrate wired sensors in with your new Qolsys IQ Panel 2 Plus System? That's where the Qolsys IQ Hardwire 16-F comes in. This is a wired to wireless converter module that is specifically designed for use with 319.5 MHz security systems. Hardwired sensors connect directly with the Qolsys IQ Hardwire 16-F, and the module sends out a wireless 319.5 MHz signal to the panel on their behalf. This will allow the connected wired sensors to interface with a wireless alarm system that otherwise wouldn't accept them.

There are two (2) versions of the Qolsys IQ Hardwire 16-F. There is a Qolsys IQ Hardwire 16-F w/ Small Enclosure and a Qolsys IQ Hardwire 16-F w/ Large Enclosure. The difference between these two is that the large enclosure module will come with a large plastic cabinet designed for housing multiple IQ Hardwire 16-F units in one convenient location. If you are only bringing over a few hardwired sensors and only need one converter unit, the the small enclosure will often suffice. But if you are using multiple converter modules, then you may want to house them in an enclosure.

Note that every IQ Hardwire 16-F supports up to 16 hardwired zones, including one zone for 2-wire smoke detectors. Also note that each large enclosure from Qolsys is designed to support up to two (2) sets of IQ Hardwire 16-F Converters. Backup batteries are not included, but they are highly recommended. These two sets of batteries will also fit in the large enclosure with the converters.

Both the 319.5 MHz IQ Panel 2 Plus and both versions of the IQ Hardwire 16-F are available for purchase on our website. Please make sure you are using the 319.5 MHz IQ Panel 2 Plus, as the IQ Hardwire 16-F will not work with the other versions. However, the IQ Hardwire 16-F can work with the original non-Plus Qolsys IQ Panel 2. And if you have a 345 MHz IQ Panel 2 Plus, then you can achieve similar results with the Honeywell 5800C2W. Before you know it, you will have an effective and reliable hybrid alarm system!

If you have any questions about using the Qolsys IQ Panel 2 Plus with a Qolsys IQ Hardwire 16-F, or if you want to learn more about hybrid security systems in general, please email us at support@alarmgrid.com. Our support team is available from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , ,

Comments


Posted By

We have learned that Qolsys IQ Panel 2 Firmware Version 2.5.2 is now available. Anyone with a Qolsys IQ Panel 2 or IQ Panel 2 Plus can download this update. This is a universal update that will improve system performance and connectivity with Alarm.com. Apply it as soon as possible.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

There isn't too much exciting to talk about with this update, but it is still very important. The only definitive noticeable change is that it fixes an error involving low-battery alerts while using a Qolsys IQ Hardwire 16 Wired to Wireless Converter. Other than that, the update mostly serves to improve the communication between the panel and Alarm.com.

You can read the entire Technical Service Bulletin TSB# 200413 here.

To apply this update, make sure that your panel is running at least Firmware Version 2.0.1, and have your system connected with a local WIFI network. The system should be connected with its transformer, and its backup battery should be charged. Please also note that if you are updating from Firmware Version 2.5.0 or 2.5.1, you must change the Log Level to "Verbose". This is done by clicking the small grey bar at the top of the system screen and choosing Settings > Advanced Settings > Installer Code (default 1111) > Installation > System Logs.

Once you are ready, from the primary panel, click the small grey bar at the top of the screen. Choose Settings > Advanced Settings > provide the Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.5.2 > OK > Upgrade using network. The upgrade process should then begin. It normally takes less than 30 minutes. Remember that you must enter the Patch Tag exactly, or else the process will fail.

If you have any questions about this update, please email support@alarmgrid.com. We offer free technical support for monitored customers. Our support hours run from 9am to 8pm ET M-F. We look forward to hearing from you!

Note: This new Qolsys update should not be confused with Total Connect 2.0 Update Version 2.5.2, which was released in October of 2018.

Tags: , , , , , , , , , , ,

Comments


Posted By

Arguably the best and most innovative alarm panel on the market right now is the Qolsys IQ Panel 2 Plus. This security system is jam-packed with great features that help it stand-out from other alarm panels on the market. Here are 5 reasons we love the IQ Panel 2 Plus from Qolsys.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

1) PowerG Sensor Support

PowerG Sensors are some of the best in the industry with their ability to be used up to 2,000 feet away from the IQ Panel 2 Plus in open air and their 128-bit AES encryption that provides comfort and peace of mind in knowing that they are not prone to wireless hacking or takeovers. The PowerG offerings are continuing to grow and expand, and you should have no trouble finding new sensors within this robust lineup.

2) Automatic Bluetooth Disarming

At this time, the Qolsys IQ Panel 2 Plus is the only panel to offer the option for automatic Bluetooth disarming. The way that this works is you will enroll your smartphone to the system. When you get home, the panel will detect your phone using wireless Bluetooth technology and automatically disarm the system. No more racing to disarm the panel in time or fumbling around with a mobile app. Of course, you can also turn off this feature if that makes you feel more comfortable.

3) Choice of Legacy Sensors

The IQ Panel 2 Plus is a rare example of a security system that we can safely recommend regardless of what older panel you are upgrading from. With three (3) legacy sensor options (319.5 MHz, 345 MHz, 433 MHz) you can bring your existing sensors over to your new IQ Panel 2 Plus, no matter which panel is being replaced. There are also wired to wireless converters available like the Qolsys IQ Hardwire 16-F and the Honeywell 5800C2W that can be used to support converting wired sensors to wireless.

4) Built-In Communicators

Normally, a new system will require you to buy some type of communicator to get it online and set up for alarm monitoring. But not the IQ Panel 2 Plus, as it already has everything needed for alarm monitoring built inside. The system features an LTE cellular communicator (AT&T LTE or Verizon LTE), which meets the Alarm.com requirements for cellular connectivity. It also includes a built-in WIFI card, making it dual-path ready right out of the box.

5) Sleek Design

An often overlooked aspect of the IQ Panel 2 Plus is its sleek and crisp stature, which truly proves that an alarm system doesn't have to be an eyesore or a big ugly mess that you put out of sight. With it's slim, tablet-like design and overall thin profile, the panel is something you can feel proud to display on your wall or rest on a table or desk using its included table stand. It even offers a picture frame slideshow feature that can be used to display photos when the panel is not in use.

Get Your IQ Panel 2 Plus Today!

We're happy to help you get started with a brand-new IQ Panel 2 Plus System! If you have any questions about the panel or our monitoring services, please email us at support@alarmgrid.com. Our team of experts is here from 9am to 8pm ET M-F to help you find the perfect security system and alarm monitoring plan for your needs. We look forward to hearing from you!

Tags: , , , , , , , ,

Comments


Posted By

For a security system owner, remembering to properly arm the system before leaving can be a tough task. It's one of those little things that's easy forget. You forget to grab your your car keys. You leave a door unlocked. You accidentally leave the lights on overnight. These things happen.

Honeywell lyric controller encrypted wireless security system

Another concern we often hear from customers is whether or not they really need to arm their systems if they are just stepping outside for a minute. Maybe they're just taking their dog around the block, or visiting a neighbor across the street, or walking over to a nearby convenience store. They will only be gone for a minute or two. Is it okay to leave the system disarmed in these situations?

Obviously, if you leave your system disarmed while you are away and an intruder decides to make a quick break-in, there is little that can be done. Security cameras can capture the event happening, but they aren't going to trigger an emergency response if your system is disarmed. If your system isn't ready to trigger an alarm, and you aren't around to stop an intruder, then there is very little that can be done.

With that in mind, we at Alarm Grid recommend that you always arm your system before heading out, even if it's only going to be for a brief moment. You invest into your security system for a reason. Don't let it go to waste. Protect your belongings and your property. Take the extra second or two and arm your system.

Of course, that is just our advice to you as a monitoring company. We totally understand that some users are going that have that "ah, I'll only be gone a second" mentality. And that's up to you. As an end user, you are in complete control, and if you are comfortable leaving your system disarmed when stepping out for a brief moment, then that is up to you. Just understand that we are not liable if you forget or decide not to arm your home alarm system.

One thing you might do is consider your own personal situation. Maybe it's okay to leave your system disarmed if you're just over at the neighbors, and you can visibly see your house? Maybe you can bring your Android or iOS Phone with you and arm using Total Connect 2.0 or Alarm.com if it turns out you're going to be away longer than you thought? Maybe your can add a key fob to your system to make it easier to quickly arm when walking out the door, instead of needing to enter a code or pull up a mobile app.

Ultimately, how you use your system is up to you. We recommend always arming, even if you're only going to be gone for a little bit. It's not worth the risk to your property, and securely arming/disarming your system can be such a quick and easy task if you add the right equipment. Nearly every alarm panel can be set up with some type of one-touch arming and disarming function to make the process as simple as possible.

We also understand that some users might have the intention of always arming, but they simply forget to do so. We have some tips for these users as well. You might have a secondary keypad right by the door that you will always see when walking out. That way, you will always remember to arm your system. If you don't want to add a new keypad, you could just put a sticky note on the door to remind you. And if your system is monitored, then you can set up geofencing arming reminders through an interactive service like Total Connect 2.0 or Alarm.com. There are many options available.

Remember that many wireless security systems today also often serve as automation controllers. This way, you can use an app on your phone to control the various devices around your home from anywhere. If you forget to turn off your lights, leave your thermostat running, or leave your door unlocked, then you can control the affected device while you are away. This is great for anyone who might be a little absentminded from time to time! Plus, it's good to know that you can always lock/unlock your door or turn your lights ON or OFF if needed. You just need the proper equipment.

Our job is to provide you with reliable monitoring service and the equipment you need to stay protected and secure. You just need to make sure you arm your system when leaving your home. If you need any more tips for remembering to arm your system, or if you want to learn more about any of our products or services that may make it easier for your to use your system, just reach out to us by emailing support@alarmgrid.com. We operate support hours from 9am to 8pm ET M-F, and we are happy to help you out. We look forward to hearing from you!

Tags: , , , , , , , , , , ,

Comments


Posted By

Firmware Version 2.5.0 for the Qolsys IQ Panel 2 Plus is now officially available and can be downloaded to any original IQ Panel 2 or IQ Panel 2 Plus. The update provides some new and exciting capabilities for the system. It is advised that anyone with a compatible IQ2 System updates ASAP.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

Before we talk about the new features that come with Software Version 2.5.0, let's first discuss how to update the software on the panel. The IQ Panel 2 or IQ Panel 2 Plus System must be already running at least Firmware Version 2.0.1. The panel must be connected to a local WIFI network. Its transformer should be plugged in, and its backup battery should be charged. Once those conditions are met, you can begin the upgrading process.

Start from the main screen of the system. Click the small grey bar at the top of the screen. Select Settings > Advanced Settings > enter the Installer Code (default is 1111) > Upgrade Software > Patch Tag > enter iqpanel2.5.0 > OK > Upgrade Using Network. If done correctly, the upgrading process should begin. The process will take around (15) minutes. Please note that you must enter iqpanel2.5.0 exactly as the Patch Tag. If you enter the Patch Tag differently, then the process will not work correctly. If you do not have access to a WIFI connection, the firmware update files can be downloaded from our site.

As for the 2.5.0 Firmware itself, the following new features and changes have been made:

  • New Sensor Group 25 - Non Reporting. Used with Environmental Sensors (Flood, Freeze, Temperature). Will not report to central station, but will report to Alarm.com Fixes previous issue of temperature sensors being unable to send notifications to users through Alarm.com.
  • New Sensor Group 53 - Temperature Reporting. Used with Temperature Sensors for reporting to a central station.
  • Added support for sump pump integration through Alarm.com if Water Management Add-On Package is applied to the account.
  • Can now delete failed Z-Wave nodes from Alarm.com.
  • Added software and settings that support European CE & EN Grade 2 Certification.
  • New Languages: Dutch, Italian, Icelandic, Norwegian, Swedish.
  • Sensor name length limit increased from 24 characters to 56 characters.
  • Can now set Photo Frame Start Time to begin after One (1) Minute of inactivity.
  • Panel overheat notification can now be sent to Alarm.com.
  • New quick names for motion detection sensors available.
  • Disabling the Panel Camera Setting now also disables Panel Camera from the Equipment List and from the Alarm.com back-end and mobile app.
  • Master Code can now make language changes.
  • Minor translation updates for Spanish and French (Canadian).
  • Added access to Tutorial Help Videos on the last page of the Easy Install Wizard.
  • Enhanced weather icon mapping between the system and Alarm.com.
  • Corrected constant chime issue for Qolsys IQ Remote Keypad.
  • IQ Remote will now make severe weather alert annunciations (if enabled on main panel).
  • Corrected issue where IQ Remote could become stuck in Network Reconnection.
  • Improved communication reliability between system and IQ Remote.
  • Photo frame images can now be sent from system to IQ Remote.
  • New ability to record duress alarm videos using IQ Remote built-in camera.
  • Can enable/disable Disarm Photos for IQ Remote.
  • Live-stream cameras can now be full screen on IQ Remote.
  • Alarm image upload to primary panel has been improved.
  • Check-In & Check-Out Photos for Alarm.com Wellness can be sent to Alarm.com when Image-Plus Add-On Package is applied to the account.
  • Wellness alarms will now "ring" at the panel during two-way voice calls.
  • New wellness alarm voice annunciations.
  • New automatic volume adjustment during wellness alarms.
  • Wellness alarm notifications are now automatically cleared after (12) hours.
  • Now supports end of line resistor (EOLR) detection when using the auxiliary input on DSC PG9303, DSC PG9312, and DSC PG9945 Sensors.
  • Sensor Group 2 - Fixed Silent now available for PowerG Panic Buttons, including DSC PG9938 and DSC PG9949.
  • PowerG Sensor Supervision and Legacy Sensor Supervision (319.5 MHz, 345 MHz, 433 MHz) can now be set separately. Options from 20 minutes to 24 hours available.
  • PowerG Sensor Re-Syncing and Not-Networked Status are now dynamically displayed on main page as part of sensor status.
  • New setting that allows sounders in PowerG Smoke Detectors to activate during any alarm type.
  • PowerG Sensors are now displayed in Sensor Test in Easy Install Wizard.
  • PowerG Image Sensors (DSC PG9934P & PG9944) can now be used for visual verification for fire and carbon monoxide (CO) alarms for the central station.
  • DSC PG9902 Wireless Outdoor Curtain Motion Sensor now supported.
  • New ability to report tamper condition for Visonic KP-140, KP-141, and KP-160.
  • The PowerG Sensor Test now shows historical signal strength for PowerG Sensors.
  • Strobe lights on PowerG Sirens (DSC PG9901 & DSC PG9911B) now flash according to siren type.
  • PowerG Keypad DSC WS9LCDWF9 now supports Quick Exit feature.
  • PowerG Keypad DSC WS9LCDWF9 buzzer now stops during a two-way voice session.
  • New support for PowerG Repeater DSC PG9920 AC Loss notification.

If you have any questions about Firmware Version 2.5.0, or if you would like to learn more about our monitoring services, please email us at support@alarmgrid.com. We operate support hours from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , ,

Comments