HD Security Cameras Posts

In October Alarm Grid received a limited supply of the new IPCAM-WOC2, which sold out quickly. Since that time, Total Connect has been without an outdoor camera option. We're happy to announce that the Resideo IPCAM-WOC2 is back in stock, ready to ship. If you've been waiting, wait no more.

As we reported in October, the IPCAM-WOC2 is the updated replacement for the discontinued IPCAM-WOC1. The two items look almost identical, with the IPCAM-WOC2 having an internal BlueTooth Antenna, as opposed to an external one on the wire dongle. The reset switch has also been redesigned to be slightly easier to reach once the camera is mounted.

In October, we had ten (10) of these cameras available, and they sold out pretty quickly. Since then, we've been waiting for this, and many other items' stock to be replenished, and today we got the word that the Total Connect 2.0 outdoor camera option is available once again. Hopefully, this will be the first of many items to have their stock replenished.

The IPCAM-WOC2 is an outdoor camera with an IP66 rated housing. It captures video in 1080p HD and can connect to a 2.4 GHz WIFI network. It has a 117.0° diagonal field of view, which provides excellent coverage. It has superior night vision capabilities compared to the IPCAM-WOC1, and also supports audio analytics with intelligent sound detection. It supports a MicroSD card for backup storage in the event the network connection goes down, and comes with a 16 GB card included.

As with the other Resideo HD cameras supported by Total Connect 2.0, the IPCAM-WOC2 uses a QR Code generated on a smart device in order to be associated with the proper Total Connect 2.0 account. For this reason, it is best to configure the camera with the account prior to actually mounting it in its final location. Doing so may prevent a few extra trips up and down a ladder. Pairing the camera with the account prior to installation also allows you to verify the installation location and viewing angle before you permanently tighten everything down in the installation.

What do you think about the IPCAM-WOC2 and its availability? Have you been waiting impatiently to purchase a Total Connect 2.0 compatible outdoor camera? Is there some other product you're waiting for? Leave a comment below and let us know. We always look forward to hearing from you.

In October Alarm Grid received a limited supply of the new IPCAM-WOC2, which sold out quickly. Since that time, Total Connect has been without an outdoor camera option. We're happy to announce that the Resideo IPCAM-WOC2 is back in stock, ready to ship. If you've been waiting, wait no more.

As we reported in October, the IPCAM-WOC2 is the updated replacement for the discontinued IPCAM-WOC1. The two items look almost identical, with the IPCAM-WOC2 having an internal BlueTooth Antenna, as opposed to an external one on the wire dongle. The reset switch has also been redesigned to be slightly easier to reach once the camera is mounted.

In October, we had ten (10) of these cameras available, and they sold out pretty quickly. Since then, we've been waiting for this, and many other items' stock to be replenished, and today we got the word that the Total Connect 2.0 outdoor camera option is available once again. Hopefully, this will be the first of many items to have their stock replenished.

The IPCAM-WOC2 is an outdoor camera with an IP66 rated housing. It captures video in 1080p HD and can connect to a 2.4 GHz WIFI network. It has a 117.0° diagonal field of view, which provides excellent coverage. It has superior night vision capabilities compared to the IPCAM-WOC1, and also supports audio analytics with intelligent sound detection. It supports a MicroSD card for backup storage in the event the network connection goes down, and comes with a 16 GB card included.

As with the other Resideo HD cameras supported by Total Connect 2.0, the IPCAM-WOC2 uses a QR Code generated on a smart device in order to be associated with the proper Total Connect 2.0 account. For this reason, it is best to configure the camera with the account prior to actually mounting it in its final location. Doing so may prevent a few extra trips up and down a ladder. Pairing the camera with the account prior to installation also allows you to verify the installation location and viewing angle before you permanently tighten everything down in the installation.

What do you think about the IPCAM-WOC2 and its availability? Have you been waiting impatiently to purchase a Total Connect 2.0 compatible outdoor camera? Is there some other product you're waiting for? Leave a comment below and let us know. We always look forward to hearing from you.

Beginning on December 6, and continuing through December 31, 2021 Alarm Grid customers who subscribe to Alarm.com video service can capture a picture of Santa Clause as he visits their home. Not all cameras have the ability to capture images of Santa, but Alarm.com has a few cameras that do.

The following cameras offered by Alarm.com are capable of capturing Santa's image:

• ADC-V515
• ADC-V520
• ADC-V521IR
• ADC-V522IR
• ADC-V523
• ADC-V622/ADC-V622-WELL
• ADC-VC726
• ADC-VC736
• ADC-VC826
• ADC-VC836
• ADC-V722W
• ADC-V723
• ADC-V724

Any Alarm Grid customer with one of the cameras listed above and a monitoring plan that includes video has the ability to take advantage of this rare opportunity to see the big man in action. There are limits to this technology, though. The only way you can see Santa is through a still image captured within a screenshot. He moves so quickly, you can't possibly catch him in an actual video clip.

The ability to grab an image of Santa is only available through the Alarm.com Customer App, not through the web page. In order to support this feature, iOS users must be on version 4.17 and higher of the app, while Android users must be on version 4.15.1 and higher. The Alarm.com app is available as a free download through the Apple App Store or the Google Play Store.

To use this feature, log into the app using the proper credentials, completing any two-factor authentication that you may have setup. Once you're logged in, click on the menu icon in the upper left (≡) then tap Video from the list of menu items. Select the live video feed of any of the compatible cameras listed above that you may have associated with your account. Click the Santa icon available near the top of the live stream:

This is when the magic happens! The first time you click on the icon, a pop-up window will show you how to capture the proper image for your situation. For cameras and images in full light, Santa may appear in color. If the image is captured at night, then Santa may appear in black and white. Once you have the image, you can either choose to share it, download it, or both.

It's that simple! This magic "Santa Filter" is only available until the end of December. After that, we'll have to wait until next year to see if this particular Holiday Magic will be available again then. Alarm Grid customers with a Platinum Plan (Self or Full) or with a Stand-alone video plan can take advantage of this opportunity.

Beginning on December 6, and continuing through December 31, 2021 Alarm Grid customers who subscribe to Alarm.com video service can capture a picture of Santa Clause as he visits their home. Not all cameras have the ability to capture images of Santa, but Alarm.com has a few cameras that do.

The following cameras offered by Alarm.com are capable of capturing Santa's image:

• ADC-V515
• ADC-V520
• ADC-V521IR
• ADC-V522IR
• ADC-V523
• ADC-V622/ADC-V622-WELL
• ADC-VC726
• ADC-VC736
• ADC-VC826
• ADC-VC836
• ADC-V722W
• ADC-V723
• ADC-V724

Any Alarm Grid customer with one of the cameras listed above and a monitoring plan that includes video has the ability to take advantage of this rare opportunity to see the big man in action. There are limits to this technology, though. The only way you can see Santa is through a still image captured within a screenshot. He moves so quickly, you can't possibly catch him in an actual video clip.

The ability to grab an image of Santa is only available through the Alarm.com Customer App, not through the web page. In order to support this feature, iOS users must be on version 4.17 and higher of the app, while Android users must be on version 4.15.1 and higher. The Alarm.com app is available as a free download through the Apple App Store or the Google Play Store.

To use this feature, log into the app using the proper credentials, completing any two-factor authentication that you may have setup. Once you're logged in, click on the menu icon in the upper left (≡) then tap Video from the list of menu items. Select the live video feed of any of the compatible cameras listed above that you may have associated with your account. Click the Santa icon available near the top of the live stream:

This is when the magic happens! The first time you click on the icon, a pop-up window will show you how to capture the proper image for your situation. For cameras and images in full light, Santa may appear in color. If the image is captured at night, then Santa may appear in black and white. Once you have the image, you can either choose to share it, download it, or both.

It's that simple! This magic "Santa Filter" is only available until the end of December. After that, we'll have to wait until next year to see if this particular Holiday Magic will be available again then. Alarm Grid customers with a Platinum Plan (Self or Full) or with a Stand-alone video plan can take advantage of this opportunity.

Alarm.com video customers have another great weapon in their defensive arsenal. It's called Perimeter Guard™ and it works like this. Customers with video analytics enabled and using compatible cameras can program those cameras to flash their LEDs and make noise when an intruder is detected.

All that is required in order to enable this feature is an Alarm.com monitoring plan with Video Analytics enabled. Any Alarm Grid customer who subscribes to a monitoring plan that supports video can have this feature enabled. We don't enable Video Analytics by default because we pay more for it, but we don't charge more for it. But if you want to utilize this feature we're happy to enable it for you. Both of our Platinum plans, as well as our stand-alone video plan support this feature.

The list of cameras that can be used with this feature is always growing. Basically, the camera needs to have either a visible LED or a speaker with which to make noise on. Currently, the cameras that support Perimeter Guard™ are (updated 4/23):

• ADC-V724 on firmware version 0.6.1.387+ (supports LED and Audio Alert)
• ADC-V523 on firmware version 0.6.1.387+ (supports LED and Audio Alert)
• ADC-V723 on firmware version 0.6.1.387+ (supports LED only)
• ADC-VC727P all versions (supports LED and Audio Alert)
• ADC-VC827P all versions (supports LED only)
• ADC-VC847PF all versions (supports LED only)
• ADC-VC728PF on firmware version 0.6.3.601+ (supports LED and Audio Alert)
• ADC-VC838PF (supports LED only)
• ADC-VDB770 on firmware version 02199+ (supports LED and Audio Alert)

With Video Analytics enabled and a compatible camera, the only other thing required is to set up a Video Analytics rule for each compatible camera. This is one of those features that you set, then forget. Get the setup correct, and then it'll take care of itself!

To set this feature up through the Alarm.com Customer Website, follow these steps:

1. Log into the website. Go to www.alarm.com/login and using your Alarm.com credentials log in, completing any 2-factor authentication required.
2. Click Video
3. Click Recording Rules
4. Create or Edit Rule. You can either click the pencil icon to add this feature to an existing Video Analytics rule for a compatible camera, or you can Add a new rule. To see how to create a rule using Video Analytics, check out this informative FAQ. Verify that the initial Video Analytics settings are properly configured, then click Next.
5. Choose response. In the Activates section choose the audible and visible response desired:
   
   • Camera LED response. Click to toggle the Camera Status LED to Enabled if you want the LED to respond when activity is detected. There is a Duration drop-down, select how long you want the LED response to last.
   • Camera Audio Alert. This option is only available on cameras using the 2-Way Audio feature. Click the Camera Audio Alert toggle to enable an Audio Alert. There is an Audio Sound dropdown menu. Select the type of sound you want the camera to make.
6. Click Save

To set this feature up through the Alarm.com App, follow these steps:

1. Log into the App. Open the Alarm.com app and using your Alarm.com credentials log in, completing any 2-factor authentication required. Click the Menu icon in the upper left.
2. Tap Video from the available menu. Then tap the Gear icon.
3. Tap Recording Rules
4. Create or Edit Rule. You can either click the pencil icon to add this feature to an existing Video Analytics rule for a compatible camera, or you can Add a new rule. To see how to create a rule using Video Analytics, check out this informative FAQ. Verify that the initial Video Analytics settings are properly configured, then click Next.
5. Choose response. In the Activates section choose the audible and visible response desired:
   
   • Camera LED response. Click to toggle the Camera Status LED to Enabled if you want the LED to respond when activity is detected. There is a Duration drop-down, select how long you want the LED response to last.
   • Camera Audio Alert. This option is only available on cameras using the 2-Way Audio feature. Click the Camera Audio Alert toggle to enable an Audio Alert. There is an Audio Sound dropdown menu. Select the type of sound you want the camera to make.
6. Tap Save

It's that simple! Once you have this configured, using the advanced video analytics available through Alarm.com, the rule will take care of itself. The idea is that the flashing LED and the audible sounder will scare away an intruder before they ever make it to your home. It's a pound of prevention to ward off a ton of regret.

What do you think about this Alarm.com feature? Have you used it and had experience with it? Do you think it's something you'd like to give a try? Leave a comment below and let us know what you think. We love to hear from our readers.

Alarm.com video customers have another great weapon in their defensive arsenal. It's called Perimeter Guard™ and it works like this. Customers with video analytics enabled and using compatible cameras can program those cameras to flash their LEDs and make noise when an intruder is detected.

All that is required in order to enable this feature is an Alarm.com monitoring plan with Video Analytics enabled. Any Alarm Grid customer who subscribes to a monitoring plan that supports video can have this feature enabled. We don't enable Video Analytics by default because we pay more for it, but we don't charge more for it. But if you want to utilize this feature we're happy to enable it for you. Both of our Platinum plans, as well as our stand-alone video plan support this feature.

The list of cameras that can be used with this feature is always growing. Basically, the camera needs to have either a visible LED or a speaker with which to make noise on. Currently, the cameras that support Perimeter Guard™ are (updated 4/23):

• ADC-V724 on firmware version 0.6.1.387+ (supports LED and Audio Alert)
• ADC-V523 on firmware version 0.6.1.387+ (supports LED and Audio Alert)
• ADC-V723 on firmware version 0.6.1.387+ (supports LED only)
• ADC-VC727P all versions (supports LED and Audio Alert)
• ADC-VC827P all versions (supports LED only)
• ADC-VC847PF all versions (supports LED only)
• ADC-VC728PF on firmware version 0.6.3.601+ (supports LED and Audio Alert)
• ADC-VC838PF (supports LED only)
• ADC-VDB770 on firmware version 02199+ (supports LED and Audio Alert)

With Video Analytics enabled and a compatible camera, the only other thing required is to set up a Video Analytics rule for each compatible camera. This is one of those features that you set, then forget. Get the setup correct, and then it'll take care of itself!

To set this feature up through the Alarm.com Customer Website, follow these steps:

1. Log into the website. Go to www.alarm.com/login and using your Alarm.com credentials log in, completing any 2-factor authentication required.
2. Click Video
3. Click Recording Rules
4. Create or Edit Rule. You can either click the pencil icon to add this feature to an existing Video Analytics rule for a compatible camera, or you can Add a new rule. To see how to create a rule using Video Analytics, check out this informative FAQ. Verify that the initial Video Analytics settings are properly configured, then click Next.
5. Choose response. In the Activates section choose the audible and visible response desired:
   
   • Camera LED response. Click to toggle the Camera Status LED to Enabled if you want the LED to respond when activity is detected. There is a Duration drop-down, select how long you want the LED response to last.
   • Camera Audio Alert. This option is only available on cameras using the 2-Way Audio feature. Click the Camera Audio Alert toggle to enable an Audio Alert. There is an Audio Sound dropdown menu. Select the type of sound you want the camera to make.
6. Click Save

To set this feature up through the Alarm.com App, follow these steps:

1. Log into the App. Open the Alarm.com app and using your Alarm.com credentials log in, completing any 2-factor authentication required. Click the Menu icon in the upper left.
2. Tap Video from the available menu. Then tap the Gear icon.
3. Tap Recording Rules
4. Create or Edit Rule. You can either click the pencil icon to add this feature to an existing Video Analytics rule for a compatible camera, or you can Add a new rule. To see how to create a rule using Video Analytics, check out this informative FAQ. Verify that the initial Video Analytics settings are properly configured, then click Next.
5. Choose response. In the Activates section choose the audible and visible response desired:
   
   • Camera LED response. Click to toggle the Camera Status LED to Enabled if you want the LED to respond when activity is detected. There is a Duration drop-down, select how long you want the LED response to last.
   • Camera Audio Alert. This option is only available on cameras using the 2-Way Audio feature. Click the Camera Audio Alert toggle to enable an Audio Alert. There is an Audio Sound dropdown menu. Select the type of sound you want the camera to make.
6. Tap Save

It's that simple! Once you have this configured, using the advanced video analytics available through Alarm.com, the rule will take care of itself. The idea is that the flashing LED and the audible sounder will scare away an intruder before they ever make it to your home. It's a pound of prevention to ward off a ton of regret.

What do you think about this Alarm.com feature? Have you used it and had experience with it? Do you think it's something you'd like to give a try? Leave a comment below and let us know what you think. We love to hear from our readers.

Alarm Grid has obtained an extremely limited supply of the brand new Resideo IPCAM-WOC2 WIFI, outdoor, 1080p camera, compatible with Total Connect 2.0. After the announcement in March, 2021 that the IPCAM-WOC1 was discontinued, Resideo and Honeywell Home were left with no outdoor camera option.

Our blog in March announced that the Honeywell IPCAM-WOC1 would be discontinued. At the time, we didn't know why the camera was being discontinued. There wasn't a lot of information available then about why it was discontinued, or whether there would ever be a replacement. With Alarm.com releasing new variations of their cameras at a fast and furious pace, we were left to wonder what Resideo was thinking.

In July, 2021, we passed on to our readers that either the IPCAM-WOC1 (also sometimes referred to as the Lyric OC1) would make a return, or if not a return, that it would possibly be replaced with something very similar. It came to light that the reason the outdoor camera had been discontinued in the first place was that certain components involved in its production were no longer being produced.

Resideo was unable to source those same components elsewhere, so they are preparing to release the IPCAM-WOC2. This camera is technically not even released yet, so we don't have official documentation, with the exception of a Quick Install Guide, which frankly, contains several errors. For starters, we know for a fact that the image of the camera and its components used in the guide is incorrect. This document, much like the camera itself, will soon be receiving a face lift.

Some of the things that we know are updated in the IPCAM-WOC2, as compared to the IPCAM-WOC1 are: The Bluetooth Antenna is internal on the IPCAM-WOC2. It was external (part of the big wiring bundle) on the IPCAM-WOC1. The WOC2 will support Audio Analytics, with intelligent sound detection. The WOC1 did not support audio. The IPCAM-WOC2 comes with a 16 GB MicroSD card pre-installed, the IPCAM-WOC1 came with a 8 GB card. These are just a few things that we know about, when the full specs are released, we will update our product description with the full gamut of features and specifications.

If you've been waiting to get your hands on an outdoor 1080p camera that's compatible with Total Connect 2.0, now is your chance to pick one up. Given all the supply chain issues revolving around the global chip shortage, this is one of a handful of products that we know is currently in stock. But you had better hurry, because supplies are extremely limited. Once the units we have in stock are gone, we will likely have to wait for the full product release before we can offer any more.

Alarm Grid has obtained an extremely limited supply of the brand new Resideo IPCAM-WOC2 WIFI, outdoor, 1080p camera, compatible with Total Connect 2.0. After the announcement in March, 2021 that the IPCAM-WOC1 was discontinued, Resideo and Honeywell Home were left with no outdoor camera option.

Our blog in March announced that the Honeywell IPCAM-WOC1 would be discontinued. At the time, we didn't know why the camera was being discontinued. There wasn't a lot of information available then about why it was discontinued, or whether there would ever be a replacement. With Alarm.com releasing new variations of their cameras at a fast and furious pace, we were left to wonder what Resideo was thinking.

In July, 2021, we passed on to our readers that either the IPCAM-WOC1 (also sometimes referred to as the Lyric OC1) would make a return, or if not a return, that it would possibly be replaced with something very similar. It came to light that the reason the outdoor camera had been discontinued in the first place was that certain components involved in its production were no longer being produced.

Resideo was unable to source those same components elsewhere, so they are preparing to release the IPCAM-WOC2. This camera is technically not even released yet, so we don't have official documentation, with the exception of a Quick Install Guide, which frankly, contains several errors. For starters, we know for a fact that the image of the camera and its components used in the guide is incorrect. This document, much like the camera itself, will soon be receiving a face lift.

Some of the things that we know are updated in the IPCAM-WOC2, as compared to the IPCAM-WOC1 are: The Bluetooth Antenna is internal on the IPCAM-WOC2. It was external (part of the big wiring bundle) on the IPCAM-WOC1. The WOC2 will support Audio Analytics, with intelligent sound detection. The WOC1 did not support audio. The IPCAM-WOC2 comes with a 16 GB MicroSD card pre-installed, the IPCAM-WOC1 came with a 8 GB card. These are just a few things that we know about, when the full specs are released, we will update our product description with the full gamut of features and specifications.

If you've been waiting to get your hands on an outdoor 1080p camera that's compatible with Total Connect 2.0, now is your chance to pick one up. Given all the supply chain issues revolving around the global chip shortage, this is one of a handful of products that we know is currently in stock. But you had better hurry, because supplies are extremely limited. Once the units we have in stock are gone, we will likely have to wait for the full product release before we can offer any more.

The new ADC-V724 is the first camera from Alarm.com to offer 2-Way Audio in addition to 1080p HDR video, and IR night vision. With the integrated mic and speaker, you could easily have some fun with the neighborhood trick-or treaters while still protecting your property from vandals.

We all know that house in the neighborhood where the owners go all-out for Halloween. In some cases, it's like a haunted house attraction where, instead of having to pay to get in, you get candy if you're brave enough to get to the door. The Alarm.com ADC-V724 could help you make your house the one everybody's talking about this year!

Don't get me wrong, this camera is great all year. It just happens that it's being released at this time of year, which is fortuitous. Because, maybe you're not that house, maybe you're the other house. The one where the inhabitants turn all the lights off and pretend not to be home because they forgot to buy candy. Maybe you're in for some tricks because you don't have any treats. Well, the ADC-V724 has you covered there too. With one of these installed, you can sit inside and watch your property. If anyone shows up to play tricks, you can politely tell them through the camera that they should skip your house.

The ADC-V724 has an improved mount over previous versions of Alarm.com cameras, for better long-term stability. It also has an easier to reach Micro SD card slot, in the event you want to take advantage of the Onboard Recording feature. The minimum capacity for a Micro SD card is 32GB, maximum is 512 GB. No Micro SD card is included with the camera. It also allows you to take advantage of the full suite of Alarm.com Video Analytics, which is a powerful tool for eliminating unwarranted video captures. The ADC-V724 offers High Dynamic Range (HDR) for better light/dark contrast in low-light environments, and can work with either 2.4 GHz or 5 GHz WIFI. With the built-in microphone, audio is included in recorded clips. When it comes to providing evidence to the police, audio is often just as important to them as video evidence, so this is a great added feature.

The speaker and Micro SD card slot can be seen in this image:

What do you think about the Alarm.com ADC-V724? Are you in the market for new indoor/outdoor cameras? Will you be going all-out for Halloween, are you the house with no candy, or somewhere in-between? Leave a comment below and let us know what you think. If there's something you'd like to see us cover in our blog, you can let us know that as well. See you next time, until then as always, stay safe!

The new ADC-V724 is the first camera from Alarm.com to offer 2-Way Audio in addition to 1080p HDR video, and IR night vision. With the integrated mic and speaker, you could easily have some fun with the neighborhood trick-or treaters while still protecting your property from vandals.

We all know that house in the neighborhood where the owners go all-out for Halloween. In some cases, it's like a haunted house attraction where, instead of having to pay to get in, you get candy if you're brave enough to get to the door. The Alarm.com ADC-V724 could help you make your house the one everybody's talking about this year!

Don't get me wrong, this camera is great all year. It just happens that it's being released at this time of year, which is fortuitous. Because, maybe you're not that house, maybe you're the other house. The one where the inhabitants turn all the lights off and pretend not to be home because they forgot to buy candy. Maybe you're in for some tricks because you don't have any treats. Well, the ADC-V724 has you covered there too. With one of these installed, you can sit inside and watch your property. If anyone shows up to play tricks, you can politely tell them through the camera that they should skip your house.

The ADC-V724 has an improved mount over previous versions of Alarm.com cameras, for better long-term stability. It also has an easier to reach Micro SD card slot, in the event you want to take advantage of the Onboard Recording feature. The minimum capacity for a Micro SD card is 32GB, maximum is 512 GB. No Micro SD card is included with the camera. It also allows you to take advantage of the full suite of Alarm.com Video Analytics, which is a powerful tool for eliminating unwarranted video captures. The ADC-V724 offers High Dynamic Range (HDR) for better light/dark contrast in low-light environments, and can work with either 2.4 GHz or 5 GHz WIFI. With the built-in microphone, audio is included in recorded clips. When it comes to providing evidence to the police, audio is often just as important to them as video evidence, so this is a great added feature.

The speaker and Micro SD card slot can be seen in this image:

What do you think about the Alarm.com ADC-V724? Are you in the market for new indoor/outdoor cameras? Will you be going all-out for Halloween, are you the house with no candy, or somewhere in-between? Leave a comment below and let us know what you think. If there's something you'd like to see us cover in our blog, you can let us know that as well. See you next time, until then as always, stay safe!