PowerG Carbon Monoxide Detectors Posts

Posted By

Actress Anna Faris, known for her comedic roles, suffered from a not-so-funny incident over the recent Thanksgiving Holiday. The actress and 12 members of her family were the victims of a carbon monoxide (CO) gas incident. The incident occurred in a North Lake Tahoe cabin they were renting.

Qolsys iq carbon

A representative from the North Tahoe Fire Protection District stated that the vacation cabin had carbon monoxide levels as high as 55 parts per million (ppm). Long-term indoor exposure should be no higher than 15 ppm. The structure did not have any carbon monoxide sensors installed to indicate such danger. Nevada state law requires CO alarms in all family dwellings.

Thankfully, Anna Faris and her family are okay following the incident. However, two of her family members visited the local emergency room. Doctors diagnosed them with CO poisoning, and they were perfectly fine after receiving some care. Firefighters from the North Tahoe FD immediately rushed to the cabin and saved Ms. Faris and her accompanying family shortly thereafter.

According to North Lake Tahoe Fire Official Erin Holland, the CO levels indicated inside the building would have caused a "fatality in a short period of time" had the rescue team not intervened. Faris made sure to send her sincere gratitude to the North Tahoe FD following the incident.

Honeywell 5800combo smoke heat and co detector

We have spoken about the dangers of carbon monoxide gas many times on the Alarm Grid blog. The odorless and tasteless gas kills hundreds of people every year in the United States. If it weren't for the quick work of local firefighters, a talented actress and her family may have fallen victim as well. They are lucky to be alive, and the rescue team deserves praise for the fact that any exposure was kept as minimal as possible.

As you know by now, it is crucial to have carbon monoxide sensors installed in your home. Ideally, you should have CO detectors enrolled with your security system. By pairing these devices with a system that has active monitoring service, you and/or a central station can receive alerts regarding any of your CO sensors that activate while you are away.

If your home has hardwired high-voltage CO sensors (as is required in most jurisdictions), you can indirectly integrate these devices with your alarm system using a wireless takeover listening module. We offer variants for 345 MHz, and 433 MHz wireless alarm systems. And if you don't have hardwired CO detectors in your home, then we sell plenty of standalone units that pair directly with alarm panels like any other sensor.

Encore firefighter ff345 circular smoke detector takeover module

When traveling, make sure that all on-site CO sensors and smoke detectors are working properly. If you have any doubts, ask the building operators to perform a test. This is a reasonable request that any property manager should be able to accommodate. Please note that we ARE NOT suggesting that you bring canned CO gas or canned smoke on an airplane for testing purposes. That could get you into a lot of trouble. Make arrangements for on-site testing, without bringing your own supplies.

It may also be a good idea to buy a cheap conventional battery-operated carbon monoxide sensor when you get to your vacation site. It may turn out that the place you visit does not have CO detectors. This was the case with Anna Faris and her family. We do not sell standalone battery-operated CO detectors on our website. But you can get most models between $10 and $20 from most department and hardware stores. Some models will even show you the detected parts per million for CO gas! If you are staying in a larger property, you may want to obtain multiple sensors.

Remember that our goal at Alarm Grid is to keep you and your loved ones safe. If you ever need help choosing a carbon monoxide sensor for your system, or if you would like to learn more about how we can monitor your home, please email us at support@alarmgrid.com. You are also invited to call us at (888) 818-7728 during our usual business hours of 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , , , ,

Comments


Posted By

Alarm Grid has learned of technical difficulties between certain PowerG Sensors and the Qolsys IQ Panel 2 Plus. These issues affect the PG9914 Wireless Motion Sensor and the PG9933 Wireless Carbon Monoxide Sensor when used on an IQ2+ System running PowerG Version 80.17.

Qolsys iq panel 2 at and t wireless security system with at and Due to this issue, any DSC PowerG PG9914 Wireless Motion Sensor manufactured before August 23, 2018 will not work with a Qolsys IQ Panel 2 Plus running PowerG Firmware Version 80.17. This includes any PG9914 running firmware V3.0.5 or V3.0.7. Also, if the first four (4) digits of the Serial Number are less than "3618", then the device is affected.

Below are some pictures of a PG9914 that will not work with an IQ Panel 2 Plus running PowerG Version 80.17:


Additionally, any DSC PowerG PG9933 Carbon Monoxide Sensor manufactured before March 26, 2019 will not work with a Qolsys IQ Panel 2 Plus running PowerG Firmware Version 80.17. Any PG9933 manufactured after this date will include a sticker indicating compatibility with the IQ Panel 2 Plus.

If you want to check the PowerG Firmware for your IQ Panel 2 Plus, you can do so from the panel. Start from the main screen. Press the small grey bar at the top. Choose Settings > Advanced Settings > enter the Installer Code (default 1111) > About > PowerG. You should check the Radio Firmware Version.


If you have any questions about these incompatibilities, please reach out to us. The best way to contact us is by emailing support@alarmgrid.com. We will check your email at our earliest convenience and respond back as soon as possible. We look forward to hearing from you.

Tags: , , , , , ,

Comments