Qolsys IQ Panel 2 Plus AT&T LTE, Interlogix/GE Compatible Posts

Posted By

Hi DIYers! We recently made a post that compared wireless systems with hardwired ones. We ultimately concluded that most end users are better-suited with a wireless system. If you have decided that you need a wireless home security system, this buyer's guide can help you review the options.

Remember, no matter which system you buy, you will need an alarm monitoring plan to go along with with it. Please review our alarm monitoring page for more information. Below are some of the best wireless security systems on the market today and what makes them so great:

Qolsys IQ Panel 2 Plus

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

The Qolsys IQ Panel 2 Plus is arguably the most robust alarm system on the market today. Each version provides support for PowerG 915 MHz Sensors and a choice of one legacy sensor type (319.5 MHz, 345 MHz or 433 MHz). The PowerG Sensors are particularly renowned for their ability to be used from up to 2,000 feet away from the IQ2+ System in open air. This is also one of the few wireless all-in-one panels with the ability to display the live feed for Alarm.com Security Cameras right from its screen. The panel also includes a built-in LTE cellular communicator (AT&T or Verizon) and a fully functional Z-Wave Plus Controller. In fact, this is one of the very few systems where virtually no add-ons are needed. However, the IQ Panel 2 Plus is one of the more expensive wireless panels available on the market. But users will certainly appreciate its sleek, modern design and superb functionality. The system uses Alarm.com as its interactive service platform, and it can readily connect with the service. All versions of the IQ Panel 2 Plus can be seen here.

Choose the IQ Panel 2 Plus if:

  • You want the remarkable signal range that comes with PowerG Sensors.
  • You want the ability to easily bring over existing wireless sensors (319.5 MHz, 345 MHz or 433 MHz) with your new security system.
  • You want the ability to view your security cameras right from your panel.
  • You don't mind paying top-dollar for an alarm system.

Honeywell Lyric Controller

Honeywell lyric controller encrypted wireless security system

The Honeywell Lyric Controller is still the flagship HomeKit security system from Honeywell, and the time-tested company has once-again produced an excellent panel. The Lyric is perhaps the best system on the market today for use with Apple HomeKit. It can pair natively with HomeKit in order to provide all of the functionality that a user would expect with the feature. The Lyric System also has its own lineup of encrypted sensors, called the Honeywell SiX Series. Additionally, it is backwards compatible with the Honeywell 5800 Series. Another factor that separates the Lyric from other systems is its ability to be used with Total Connect 2.0. This service is designed exclusively for Honeywell Alarm Systems, and it offers similar functionality to that of Alarm.com. The system's built-in WIFI card allows it to readily connect with the service. One downside to the Lyric is that it only includes a Z-Wave classic controller as opposed to a Z-Wave Plus controller. While it can support Z-Wave Plus devices, they will only have the capabilities of Z-Wave classic devices when used with this system. Please note, a separate Lyric Cellular Module is needed for cellular connectivity.

Choose the Lyric Controller if:

  • You plan to use your alarm system with Apple HomeKit.
  • You prefer using Total Connect 2.0 over Alarm.com.
  • You want to use encrypted Honeywell SiX Series Sensors.
  • You don't require a Z-Wave Plus controller.

2GIG GC3

2gig gc3 diy wireless security system w slash 7 screenThe 2GIG GC3 just gave itself a major upgrade in the form of partitioning support. This makes the GC3 the first ever AIO wireless system to support partitioning. 2GIG refers to this feature as "smart areas", and the system on the latest firmware, and up to four of these areas can be supported. Beyond that, the GC3 is also highly regarded for its strong build quality. That's not to say the other panels are lacking in that department, but the GC3 is perhaps the sturdiest system we have ever worked with. Its touchscreen controls are extremely responsive, and its full-color 7-inch display is a joy to look at. The system can use 2GIG 345 MHz Sensors and Honeywell 5800 Series Sensors. One weakness of the system is that it does not support any type of encrypted sensors at this time. But it does include a built-in Z-Wave Plus Controller for smart home devices. Like the IQ Panel 2 Plus, the system uses the Alarm.com service. But the user will need to buy a separate GC3 cellular communicator to use ADC.

Choose the GC3 if:

  • You need partitioning support.
  • You want a system with superb build-quality.
  • You want to use the Alarm.com platform.
  • You don't need encrypted wireless sensors.

2GIG GC2

2gig cp21 345 front

The 2GIG GC2 is our pick as a "budget" security system. We know that many people getting into home security will not need all of the advanced features that the state-of-the-art systems have to offer. That is where is the 2GIG GC2 comes into play. With the right support, it can still serve as an extremely viable option for many users. The panel features a 3.75" by 2.25" touchscreen with very responsive controls. This is considerably smaller than the 7-inch touchscreen displays of the other panels on this list, but it will work just fine for many users. The panel can support up to 60 wireless zones. Again, this is considerably less robust than the other systems, but it will be perfectly acceptable for most smaller and medium-sized homes. The system includes a Z-Wave classic controller for supporting smart home automation devices. In order to get the GC2 connected with Alarm.com, a separate GC2 cellular communicator is needed. Overall, if you're looking for a new security system at a reasonable price, you can't go wrong with the 2GIG GC2.

Choose the GC2 if:

  • You're shopping for a system on a budget.
  • You want a simple, yet capable alarm system.
  • You don't need support for as many wireless zones.
  • You don't need a larger touchscreen display.

If you still need help deciding on a wireless system, don't hesitate to reach out to us for support! You may email us any time at support@alarmgrid.com. Or you can call us at (888) 818-7728 from 9am to 8pm EST Monday thru Friday. We look forward to hearing from you!

Tags: , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! There's an unfortunate misconception in the security industry that wireless systems aren't as reliable as hardwired systems. A person may look down on wireless systems due to the the potential for hacking, wireless signal ranges and the limited battery life of wireless sensors.

Honeywell lyric controller encrypted wireless security systemThe reality though is that wireless systems are just as reliable, if not more reliable, than their hardwired counterparts. Wireless systems also offer greater convenience and more flexibility both when setting up a system and when moving it to a new location. As a result, it's not much of a surprise that most new alarm systems are of the wireless variety. With a wireless system, a user will not need to run wires across the building, and installing equipment will be made much easier. Wireless systems also have the added benefit of requiring fewer add-ons than wired systems. But even with these positives, some people may still not be convinced that wireless systems are often the superior options. Today, we're going to break-down some of the biggest misconceptions against wireless systems and prove that they are truly a viable option for home and business security.

A major concern we often hear about with wireless systems is that they could be wirelessly hacked. The fear is that a potential intruder could use specialized equipment to takeover the sensors or the control panel that is used with the system. From there, the intruder could control or disable the system and enter the property uninterrupted. While this is extremely uncommon, it is a legitimate concern for those who require the highest level of security for their home or business. However, wireless hacking is really only possible with older, unencrypted sensors. Many newer alarm systems will support encrypted wireless sensors that are virtually impossible for outsiders to takeover or hack into, even with the most advanced equipment available. The way that encryption works is by having both the panel and the sensors know a unique encryption key. Any information that is sent out is encrypted for maximum security. Once the information is received, it is decrypted using the encryption key. This process is often referred to as a "digital handshake", and it allows for wireless sensors to be some of the most secure in the industry. Some wireless sensors that utilize encryption include the Honeywell SiX Series Sensors for the Honeywell Lyric Controller, the Qolsys S-Line 319.5 MHz Sensors for the Qolsys IQ Panel 2 and IQ Panel 2 Plus Systems, and the DSC PowerG Sensors.



The next misconception we hear with wireless systems is that the wireless signals are too weak to work reliably. Some users are afraid that even once the sensor has been paired with the system, its signal could weaken over time, and it might not work reliably. This could not be further from the truth. Once a sensor is paired with a system and permanently mounted within in range, it will always work with the system. The key is to not move the system or the sensors around, as it could disrupt the signals. But there's really no reason to do this.

Users should also remember that each sensor has a certain wireless signal range that should be kept in mind when planning the system. For example, Honeywell 5800 Series Sensors have a signal range of about 200 feet away from the system. On the other hand, a DSC 915 MHz PowerG Sensor will have a wireless range of roughly 2,000 feet in open air when used with an IQ Panel 2 Plus! Remember that walls and obstacles can reduce these ranges, as the wireless signal will have a more difficult time reaching the panel. Just make sure that the sensors work reliably from their final locations before you mount them permanently. If wireless range is an issue, then you may be able to overcome the problem by using a compatible wireless repeater. Some examples of wireless repeaters include the Honeywell 5800RP and the DSC PG9920.

A third concern we come across with wireless systems is that wireless sensors offer a limited battery life. Some users ask us what happens if the battery for a wireless sensor suddenly dies. They believe that their security system could randomly stop working all because a battery died. While it's true that not having to rely on batteries is an advantage of hardwired sensors, this does not make wireless systems any less reliable. A wireless sensor that uses batteries would not just suddenly stop working in most cases. Instead, there are multiple preventive measures put in place to keep the user safe.

Whenever a sensor battery is low, it will transmit a warning to the security system. The user will receive this alert on the panel and know to change the battery as soon as possible. In most cases, the user will have a week or longer before the sensor will die. This will give them plenty of time to replace the battery. And if a sensor does ever go offline entirely, the panel will alert the user to the loss of RF supervision. This way, they will know if a sensor is ever not being detected by the panel before it becomes any type of security concern.

Qolsys iq panel 2 at and t wireless security system with at and In addition to being more convenient and easier to install, there is one other major advantage that wireless systems offer over wired systems. That is, wireless systems cannot be as easily tampered with. A hardwired sensor can have its line to the panel cut by a potential intruder so that it no longer functions properly. Of course, when this happens, the hardwired system will recognize this and trigger an immediate trouble situation. This makes this a relatively minor security concern. But it would still be very inconvenient to have to rewire the sensor and make sure that its working order has been restored.

A user might even bypass the zone for the time being and leave the system vulnerable until they can properly address the issue. With wireless systems, there are no direct physical connections, and this is much less of an issue. In that sense, because there are no physical connections to cut, an encrypted wireless system might be considered more reliable than a wired system in many cases.

Modern wireless alarm systems offer excellent reliability for homes and businesses. Virtually all of the concerns or doubts regarding wireless setups are unwarranted and not of real concern. Therefore, wireless systems offer excellent reliability and protection for virtually any home or business. They make for a great option for anyone looking get into alarm monitoring. And once you have a wireless system, make sure to sign-up for an alarm monitoring plan from Alarm Grid. We offer varying plans based on the needs of the customer. If you have any questions, do not hesitate to reach out to us at anytime through email at support@alarmgrid.com. You may also call us from 9am to 8pm EST M-F at 888-818-7728.

Tags: , , , , , , , , , , ,

Comments


Posted By

We have recently been made aware that the maximum range for the DSC 915 MHz PowerG Sensors is only 2,000 feet in open air when used with the IQ Panel 2 Plus. This is quite shorter than the 2 kilometer maximum range when these same sensors are used with DSC PowerSeries Neo Alarm Systems.

Qolsys iq panel 2 at and t wireless security system with at and Through testing, we have determined that the range of PowerG Sensors is noticeably shorter when they are used with a Qolsys IQ Panel 2 Plus instead of with a DSC PowerSeries Neo. This is likely due to the smaller antenna that is featured on the IQ Panel 2 Plus System. On a DSC PowerSeries Neo System, the sensors can achieve their advertised wireless range of up to 2km in open air. But the IQ2+ offers a considerably smaller wireless range, even with clear line of sight. The maximum range for a PowerG Sensor used with an IQ Panel 2 Plus is no more than 2,000 feet. This is much less than 2km. We also do not recommended trying to use the Power Sensors with an IQ2+ beyond 500 feet away in practice. This is especially true if many obstacles and walls are present.

Previously, we produced content that led some customers to believe that the maximum range of these sensors was 2km when used with the IQ2+. We have since learned that this is not the case, and we have adjusted our old content accordingly. These changes apply to all versions of the IQ Panel 2 Plus, regardless of which legacy daughtercard or cellular communicator is used. We apologize for any inconvenience that this may have caused for our customers.

The only way these sensors can support a 2km signal range is when they are used with a DSC PowerSeries Neo System. These systems feature more powerful antennas that can allow these sensors to achieve their maximum possible distance. Alarm Grid does not sell any PowerSeries Neo Systems at this time, but we do offer compatible Alarm.com cellular communicators that allow us to takeover these systems.

That being said, 2,000 feet of open air range is still extremely impressive for any alarm system. Even customers with the largest of homes and should be able to utilize these sensors as they see fit. And if the range still isn't enough, a PowerG wireless repeater can be used to effectively double the range. This will boost it to more than 1,000 feet when used in most homes and up to 4,000 feet when used with an IQ Panel 2 Plus in open air!

Additionally, we've found that these sensors cannot auto-enroll with an IQ Panel 2 Plus like most other compatible sensors. Instead, the Serial Number for the sensor must be manually entered. For the PowerG Sensors, this is called the "DL ID", and it can be found on the sensor's box. The user must also set the Source Signal to reflect that of PowerG. Please keep this in mind when enrolling a PowerG Sensor with an IQ Panel 2 Plus Alarm System.

UPDATE: We have since learned that you can auto-enroll PowerG Sensors with the IQ Panel 2 Plus. This post explains the process.


If you have any questions about the IQ Panel 2 Plus or DSC PowerG Sensors, please do not hesitate to reach out to us. You may email us at any time at support@alarmgrid.com, or you can call us from 9am to 8pm EST M-F at 888-818-7728. We look forward to helping you with your security needs!

Tags: , , , , , ,

Comments


Posted By

Hi DIYers! As you know, we love the Qolsys IQ Panel 2 Alarm System. It is definitely one of the most robust and advanced security systems available on the market today. But a feature that is sometimes overlooked is the built-in glass break sensor that is integrated with the system.

Qolsys iq panel 2 at and t wireless security system with at and The Qolsys IQ Panel 2 internal glass break sensor functions in basically the same manner as any other standalone glass break sensor. It will actively listen for the sound of breaking glass and trigger an alarm if it detects this type of sound while the system is armed. This is great for monitoring a window in case an intruder tries to break-in. Both the standard Qolsys IQ Panel 2 and the new Qolsys IQ Panel 2 Plus Systems contain this sensor.

The sensor must be activated from within the Installer Settings menu in order for it to be used. The internal glass break sensor is essentially treated as a wireless zone by the system. Once activated, the internal sensor will count towards the system's 128 available wireless zones. A user may want to keep this in mind if they use an extremely large number of sensors with their IQ Panel 2 System.

For the best possible detection, there should be no obstacles between the system and the window. The recommended distance between the panel and the window is from 3 to 15 feet. The internal glass break sensor will only be active when the system is armed and receiving power from its plug-in DC transformer. Depending on the sensor's programming settings, a user can set the glass break sensor to be active when the system is set to Arm Away only or both Arm Away and Arm Stay. Both "Low" and "Normal" Sensitivity options are available.

Both the IQ Panel 2 and IQ Panel 2 Plus Systems with an integrated glass break detector can be purchased from the Alarm Grid website. Protect your home or business with one of the world's best alarm systems!

Tags: , , , , , , , , , , , ,

Comments


Posted By

An exciting new feature is now available for users of the Qolsys IQ Panel 2. It is now possible to view the live video feed for Alarm.com Cameras directly from the panel itself. This is made possible through firmware update 2.2.1, which can be easily downloaded to the IQ Panel 2 System.

Qolsys iq panel 2 at and t wireless security system with at and The feature is compatible with both the IQ Panel 2 Plus and the standard IQ Panel 2 System. There are a few things to keep in mind about the live video feature. First, the panel must be connected to an active WIFI network in order for the feature to work. If the WIFI goes down, the panel will be unable to stream live video.

Second, the feature only works with compatible Alarm.com Cameras. Some cameras will allow the IQ Panel 2 to stream both video and audio, while others are for video only. The compatible cameras are listed below:

Note: The ADC-V521IR needs Firmware IP8137-ALAM-0100d1 or higher for two-way audio. The ADC-V522IR Must be Hardware Version 0101 with Firmware IP8168-ALAM-0100b9 or higher for two-way audio.

Additionally, the cameras below are for video only:

Third, a user will need to have an alarm monitoring plan that supports video. For Alarm Grid customers, these are the Platinum Level Plans. For two-way audio, the feature "Audio for Non-Doorbell Cameras" must be enabled on the user's Alarm.com account.

Remember, Firmware Version 2.2.1 is needed on the IQ Panel 2 System to support this feature. The IQ Panel 2 Plus should arrive with this firmware update already applied. But the standard IQ Panel 2 may need to have the firmware update applied. The panel should be connected with a WIFI network, have its transformer plugged-in and have a charged battery before performing the update to the system. If you need to upgrade the firmware, complete the following steps first:

1. Access the upgrade menu. Start from the home screen of the Qolsys IQ Panel 2. Press the small grey bar at the top. Choose Settings > Advanced Settings > Enter Installer Code (default 1111) > Upgrade Software. This will take you to the upgrade menu.

2. Provide the Patch Tag. Press "Patch Tag". Then enter in "iqpanel2.2.1". Press OK. This will provide the Patch Tag associated with the update.


3. Perform the update. Click "Upgrade Using Network". The update should begin to install. Press OK when prompted. The panel should reboot, and the update will be applied. This will take about five minutes. The home screen should be displayed once the update has been successfully applied.

Next, the feature must be enabled for the IQ Panel 2. This is done from Alarm.com. Login to Alarm.com website. Then choose the "Video" option on the left, followed by "Settings" at the top. Then choose "Stream Video to Security Panel Screen". Every compatible camera will have an "Authorize" toggle switch that must be selected to be used with this feature. Once all the cameras have been enabled, you can log-out of Alarm.com.

Finally, you can try streaming the live video feed from your Qolsys IQ Panel 2. Swipe left on the screen until you reach the "Live Video Cameras" page. Find the camera you want to view, and press the Play button. The panel will begin streaming the live video of the camera.

Firmware Version 2.2.1 also provided some other fixes and changes for the IQ Panel 2. These include:

  • Improved reliability and performance for Live Answer and Live View features
  • Filtering out unneeded "Motion Activated" messages sent from Alarm.com
  • Corrects a Chime and Voice problem that resets settings to "Nighttime Mode" after performing a Software Update
  • Corrects an issue where extra zones numbered 130 - 136 could be present on Alarm.com
  • Corrects a problem where the panel was reporting cellular strength signals when disconnected fro the network

If you have any questions about this new feature, please reach out to us at support@alarmgrid.com. Or call us at 888-818-7728 from 9am thru 8pm Monday thru Friday. We hope you enjoy using the video feature with your IQ Panel 2!

Tags: , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! Today we are extremely pleased to announce that the brand-new Qolsys IQ Panel 2 Plus Security Systems are here! Three different versions of the system are currently available on the Alarm Grid website. This is truly very exciting news, as we are sure you will love these systems.




With the IQ Panel 2 Plus, Qolsys has raised the bar for wireless all-in-one Alarm Systems. These are definitely some of the most robust and powerful panels we have ever offered from Alarm Grid. Currently, there are three versions of the system available:

All of the IQ Panel 2 Plus Systems provide support for the top-of-the-line PowerG Wireless Sensors. These sensors operate at 915 MHz, and they can be used from up to 2,000 feet away from the IQ Panel 2 Plus in open air. This will allow users to setup their sensors from virtually anywhere on the property, regardless of where their alarm system is located. The sensors are also protected by 128-bit AES encryption, making them nearly impossible to be hacked or taken over by others. These are definitely some of the most versatile and secure alarm sensors that we have ever encountered.

In addition to PowerG, each IQ Panel 2 Plus System will provide support for a sensor lineup at a lower wireless frequency. There are three different "flavors" that a user can choose from. These are support for 319 MHz Qolsys Sensors and Interlogix/GE Sensors, 345 MHz Honeywell 5800 Series Sensors and 2GIG Sensors, and 433 MHz legacy DSC Sensors. The 319 MHz and 345 MHz options are already available, and the 433 MHz option should be available soon. Also note that a Verizon LTE version of the 345 MHz sensor option should also be arriving in the near future.



Every IQ Panel 2 Plus System comes with a built-in WIFI card and an LTE cellular communicator. This will provide an immediate dual-path communication setup for the system. The only thing that an end user will need is an appropriate alarm monitoring plan. If either path ever goes down, the IQ Panel 2 Plus will still be able to use the other communication path and remain monitored. Both AT&T and Verizon LTE options for cellular monitoring are available.



The Qolsys IQ Panel 2 Plus has also made great strides in video surveillance. Users can view the live feed for their Alarm.com Security Cameras right from the panel itself. And Qolsys worked to better-integrate the system with the SkyBell Doorbell Cameras. Now, a users can answer their SkyBell doorbell from their panel. They can even have a live conversation with the person at their door from their IQ Panel 2 Plus! This is also possible for any ADC Camera that supports two-way voice.

The IQ Panel 2 Plus also supports a plethora of other features. These include Bluetooth disarming, an integrated glass break detector, a built-in 5MP camera, an integrated Z-Wave Plus Controller and an easy-to-use setup wizard for getting started with the system. All of this makes the IQ Panel 2 Plus one of the best systems we have ever had the pleasure of using.



The Qolsys IQ Panel 2 Plus is available from Alarm Grid now. If you have any questions, please feel free to contact us at support@alarmgrid.com, or call us at 888-818-7728 from 9am to 8pm EST Monday through Friday. We hope that you will enjoy this system as much as we do, and we look forward to hearing from you!

Tags: , , , , , , , , , , ,

Comments