Plug-in Modules Posts

Posted By

Qolsys, which is owned by Johnson Controls, Inc., the same company that owns DSC, is introducing a new lineup of PowerG automation devices. Currently, they offer a door lock along with a range of wired and plug-in switches. These devices will be supported by the IQ4 panels and the IQ Pro.

I say "will be supported" instead of "are supported" because the firmware required to support these new PowerG automation devices hasn't been released yet. For the IQ Panel 4, IQ4 Hub (PowerG Version), and IQ4 NS (PowerG Version) this is firmware version 4.4.0. For the Qolsys IQ Pro, firmware 4.3.0n is required. These firmware updates should be available later this month for the IQ4 Series panels, and soon thereafter for the IQ Pro.

We've talked before about the benefits of PowerG sensors. The big story with this and all PowerG devices is the transmitting range. Depending on the PowerG transceiver being used you can expect hundreds, and up to thousands, of feet in transmitting range. The PowerG repeaters will also work with these devices, so in the unlikely event you need one, a repeater is available.

Compare that to a Z-Wave Plus device, where you can expect a transmitting range of a couple hundred feet at most. Z-Wave is a mesh network, though, so if you plan to install a large number of devices, you can build out an impressive network using that technology. The problem is if you have a single area you want to automate, and it's not near the rest of your Z-Wave network, you might be out of luck with Z-Wave, but not with PowerG!

The encryption used with PowerG security sensors is also used here, so you get 128-bit AES encryption with FHSS (Frequency Hopping Spread Spectrum) which you can read more about here.

IQ Lock-PG:


The IQ Lock-PG (SKU: IQDLK-PGK) is available in three (3) finishes. Shown above from left to right in Satin Nickel, Matte Black, and Oil-rubbed Bronze. This lock is powered by four (4) AA batteries (not included) and with typical use, the battery life expectancy is one (1) year. This estimate is based on six (6) user code unlocking events and ten (10) locking/unlocking events per day. The IQ Lock-PG offers self-handing capability, and the lock motor is noticeably quieter than previous automated locks we've heard.

Unlike some automated locks, the IQ Lock-PG does offer the option to use a key, and two (2) keys are included with it. It has a KW1 keyway cylinder. The IQ Lock logo lights up green when the door is unlocked, and red when it is locked. This provides a nice visual indication of the lock status when the user is returning home or to their business.

Specifications:

  • Operating Temperature: Exterior: -31°F to 150°F (-35°C to 66°C), Interior: 32°F to 140°F (0°C to 60°C)
  • Material: ANSI Grade 2 Certified
  • Compatibility: Compatible with the Qolsys IQ4 NS (No Screen) (PowerG Version), IQ4 Hub (PowerG Version), IQ Panel 4, and IQ Pro panels
  • Technology: PowerG
  • Key Cylinder: Yes (KW1 keyway)
  • Self-Handing: Yes
  • Bolt Type: Motorized/ Standard Deadbolt
  • User Codes: Up to 250 unique users
  • Code Length: 4-10 Digits
  • Batteries: Four (4) AA batteries (not included)
  • Low Battery Alarm: Yes
  • Backset: 2 3/8”/ 2 3/4” Adjustable (60/70mm)
  • Door Prep: 1 1/2” / 2 1/8” (38/54mm)
  • Door Thickness: 1 3/8” ~ 2 1/4” (35-58mm) automatic adjustment
  • Lockout Mode: Keypad lockout for 3 minutes after 10 entries of invalid user code
  • Certifications: FCC, IC, ANSI BHMA A156.36 Grade 2, UL10C (20min Fire Rating)
  • IP Rating: Exterior assembly: IP54
  • Operating Humidity: Exterior: 100% condensing Interior: 20% – 95% non-condensing

IQ Switch-PG:

Next up is the Qolsys IQ Switch-PG (SKU: IQSWH-PG). This is an in-wall on/off switch without dimming. It can replace any standard in-wall switch to add automation capabilities to the circuit. With PowerG technology built-in, you will be able to automate devices in areas you may have thought impossible before. Have an outbuilding that you thought was too far away for automation? With PowerG, that goal may be well within reach depending on how far the building is located from the compatible panel.

Before removing the old switch and replacing it with the IQ Switch-PG, be sure the breaker is turned off. Failure to do so may cause damage to the switch and to you! This is a hardwired switch, which will be connected to 120V, so we do recommend that you have a qualified electrician perform the wiring.

Specifications:

  • Technology: PowerG
  • Power: 120V at 60Hz
  • Maximum Load: Incandescent 600W, CFL/LED 300W
  • Current: 5A Max
  • Standby Power Consumption: <1W
  • Wiring: 16 AWG (direct wire connection)
  • Noise: 24dB at 20cm Max
  • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature: -4°F to 140°F (-20°C to 60°C)
  • Weight: 4.09 oz (116g)
  • Operating Humidity: 0% – 85% non-condensing

IQ Dimmer-PG


The Qolsys IQ Dimmer-PG (SKU: IQDMR-PG) is also an in-wall switch, with dimming capabilities included. As with the IQ Switch-PG, this device can replace any existing 120VAC switch that fits within its specifications to add remote control and automation capabilities.

Another attractive feature for this and all of the new hardwired PowerG switches and sockets is that they come with a screwless faceplate. This provides a clean, modern look. Currently, they are only available in white. If you prefer a more traditional look, the screwless faceplate can be removed and there are screw holes for a traditional faceplate. This may also come in handy if you have multiple switches in a line and require a double-gang or triple-gang setup.

Some Important Specifications:

  • Compatibility: Compatible with the Qolsys IQ4 NS (PowerG Version), IQ4 Hub (PowerG Version), IQ Panel 4, and IQ Pro panels
  • Technology: PowerG
  • Power: 120V at 60Hz
  • Maximum Load: Incandescent 200W, CFL/LED 100W
  • Current: 1.67A Max
  • Standby Power Consumption: <1W
  • Wiring: 16-10 AWG (terminal block connection)
  • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature: -4°F to 140°F (-20°C to 60°C)
  • Weight: 4.83 oz (137g)
  • Operating Humidity: 0% – 85% non-condensing

IQ Smart Socket-PG:



The Qolsys IQ Smart Socket-PG (SKU: IQSKT-PG) is an in-wall socket with two (2) sockets that can be controlled individually. By replacing a standard in-wall socket with the IQ Smart Socket-PG you gain the ability to individually control the devices plugged into each outlet from the panel's touchscreen, or from the Alarm.com app or webpage.

Using rules and scenes, you can create automation scenarios to turn devices on or off based on other events that occur on the system, or based on a schedule. With the Smart Rules Builder, available on Alarm.com, you can easily create automation rules to suit your every need.

Specifications:

  • Color: White
  • Tamper Resistant?: Yes
  • Technology: PowerG
  • Input Power: 120VAC at 60Hz
  • Output Load: 120VAC at 60Hz, 15A Total Max Load for both outlets
  • Maximum Load: Total 1800W@120V (Resistive Load)
  • Standby Power Consumption: <1W
  • Dimensions: 14.5 x 2.75 x 1.7 Inches (115 x 70 x 44 mm)
  • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature: -4°F to 131°F (-20°C to 55°C)
  • Weight: 5.57 oz (157.8g)
  • Operating Humidity: 0% – 90% non-condensing

IQ Smart Plug-PG:

The Qolsys IQ Smart Plug-PG (SKU: IQIDP-PG) is an indoor plug-in module. Often referred to as appliance modules, these devices allow you to quickly turn any existing wall outlet into a smart outlet with no electrician required. With its low-profile form factor, you will be able to make one outlet smart without blocking the other outlet in a traditional two-outlet wall plug.

To learn these devices into any of the IQ4 panel lineup, once you have the 4.4.0 firmware installed you'll press the grey bar at the top of the panel screen, go to Settings > Advanced Settings > Enter Installer or Dealer Code (1111 or 2222 by default) > Installation > Devices > Automation > Auto Learn Devices. From there, just power on the PowerG device and it will auto-learn into the system.

Prior to firmware version 4.4.0, the Automation menu option was missing from the Devices screen, so you won't be able to properly learn these devices on older firmware panels. If you attempt to learn any of them as a security sensor, they will likely learn in, but will not operate properly and will need to be removed from sensor programming prior to proper enrollment once the firmware has been updated.

Specifications:

  • Color: White
  • Technology: PowerG
  • Power: 120VAC at 60Hz
  • Output Power: 1800W@120V (Resistive Load)
  • Standby Power Consumption: <1W
  • Dimensions: 2.6 x 1.5 x 1.29 Inches (68 x 38 x 33 mm)
  • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature: -4°F to 122°F (-20°C to 50°C)
  • Weight: 2.29 oz (65g)
  • Operating Humidity: 10% – 90% RH, non-condensing

IQ Outdoor Plug-PG:

The Qolsys IQ Outdoor Plug-PG (SKU: IQODP-PG) allows you to take one single outdoor outlet plug, and make two (2) smart outlets out of it. These two (2) outlets will be enrolled as separate automation devices and can be controlled individually.

Here's an example of how this plug can come in handy. Perhaps you used to have your patio string lights and a bug zapper connected to the two plugs of an outdoor outlet. You can now connect the IQ Outdoor Plug-PG to one of the existing available outlets, and plug the string lights and the bug zapper into it. You can automate the string lights to come on at dusk and turn off at a set time. Automate the bug zapper to turn on based on some other criteria, whether it's a schedule, or based on the opening of the patio door. And you still have one of your previously existing outlets available for another device.

Specifications:

  • Color: Black
  • Tamper Resistant?: Yes
  • Compatibility: Compatible with the Qolsys IQ4 NS (No Screen), IQ4 Hub, IQ Panel 4, and IQ Pro panels
  • Technology: PowerG
  • Power: 120VAC at 60Hz
  • Output Power: 1800W@120V (Resistive Load)
  • Output Load: 120VAC at 60Hz, 15A Total Max Load for both outlets
  • Standby Power Consumption: <1W
  • Dimensions: 2.6 x 1.5 x 1.29 Inches (68 x 38 x 33 mm)
  • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature: -4°F to 122°F (-20°C to 50°C)
  • Weight: 2.29 oz (65g)
  • Operating Humidity: 10% – 90% RH, non-condensing

At Alarm Grid, we're super excited about the launch of these new automation devices. I believe these will be game-changing, particularly in circumstances where transmitting distance has been a hindrance in the past. I expect we'll see additional PowerG automation devices in the near future.

Hopefully, a PowerG garage door controller, PowerG PGM device, and my personal hope, some PowerG motorized blinds or shades. Stay tuned and we'll let you know when the firmware to support these devices is released. Are you excited about the new PowerG automation products? Leave a comment below and let us know what you think. What other automation devices would you like to see in the PowerG lineup?

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

"That's Brilliant!" You will soon be hearing that a lot in automation circles. Brilliant Smart Home System has managed to gain a lot of ground in a short time. This is due to their many company relationships. Alarm Grid is pleased to offer the complete line of Brilliant Smart Home System products.

Brilliant Smart Home has designed an in-wall Smart Home Controller or Hub, an in-wall Smart Dimmer, and a Smart Plug. The smart home controller incorporates voice control with Alexa built-in. It can also be used with Google Assistant and Apple HomeKit, which offers voice control using Siri. At least one (1) Brilliant Smart Home Controller must be installed in a location in order to use their services.

The convenient thing about Brilliant's Smart Home Hubs is that they replace an existing in-wall switch. A Brilliant hub or dimmer can replace a toggle, paddle, Decora, rocker, or an existing dimmer. These modules are eye-catching and go with just about any decor. Since the Brilliant Control is installed in the wall it eliminates messy, exposed wires, which you usually have with traditional smart hub setups.

Brilliant's line of smart Home Controllers or Hubs includes four (4) options. Each adds a different level of switch control. There is the 1-switch panel, 2-switch panel, 3-switch panel, and 4-switch panel. The hubs each contain a 5" LCD Touchscreen. The 1-switch panel has on/off and dimming for a single light via the touchscreen. The 2-switch panel has on/off and dimming for 2 separate lights. The 3-switch for 3 lights and the 4-switch for 4 lights. These 2, 3, and 4 switch panels, all have separate touch sliders for on/off and dimming capabilities. Each Smart Hub will install in a standard electrical switch box. This should already be in place for retrofit installs.

These smart hubs can do so much more than just operate the lights or outlets they are wired to. They have a built-in camera, a motion detector, and ambient light sensors. They can also integrate with a compatible video doorbell, and allow viewing of the doorbell, and interaction with your visitor, right on the Brilliant 5" touchscreen display. They can connect and control your smart locks, compatible garage door openers, and smart shades. You can utilize the video and audio intercom feature to communicate between rooms. As long as each room has a Brilliant Smart Hub installed.

You can use these smart hubs to control a compatible smart thermostat, a Sonos speaker system, and many other options. They also integrate with Resideo's Total Connect 2.0 remote control platform for alarm systems. This allows for system arming and disarming, notifications, and Z-Wave device control. With this integration, the user can also view TC2 video cameras via the smart hub.

A monitoring plan with Automation enabled is required, and for camera viewing, a plan that includes video. However, the Brilliant integration is included with those plans at no extra cost. For Alarm Grid customers Automation is included with Self Silver, Silver, Self Gold, and Gold plans. Video surveillance is included in our Self Platinum and Platinum plans.

When you are away from home, even if you haven't yet set up scenes to automate your devices, you will still be able to remotely control them using the Brilliant Smart App. It is available as a free download from the Apple App Store or the Google Play Store. Automation scenes can be created based on events, schedules, or a combination of both.

Brilliant expands its range of smart home devices with the Smart Dimmer Switch that can turn on/off, dim, or run a scene based on the user tapping the capacitive touch plate. It has built-in motion detection, allowing the system to automatically turn lights on or off. Alarm Grid offers these smart dimmer switches in White, Black, Light Almond, or Gray. At least one (1) Smart Controller Hub must be installed in order to use the Brilliant Smart Dimmers.

To round out its family of Brilliant Smart Home Products, they offer a Smart Plug. It adds the ability to control nearly any plug-in device along with the option to integrate that device into scenes. Use it for lamps, coffee makers, fans, heaters, and more. At least one (1) Smart Controller Hub must be installed before you can use a Brilliant Smart Plug.

The Brilliant Smart Controller Hubs, and the in-wall smart dimmer switch, both require 120VAC, with a neutral, and a ground, and line and load wires for multi-way switches. They can be set up in a single pole or 3 or 4, multiway configuration. The smart hub can share control with a standard switch as long as there is no dimming capability on it. For the Smart Dimmer, all switches would need to be replaced with Brilliant Switches in a 3 or 4, multiway configuration.

Brilliant is compatible with the following manufacturers, and the list is growing all the time:
  • Voice Assistants:
    • Alexa built-in
    • Apple HomeKit
    • Google Assistant
  • Lighting & Switches:
    • Leviton (via SmartThings)
    • Lutron(via SmartThings)
    • LIFX
    • Philips Hue
    • tp-link
    • WEMO
  • Climate:
    • Ecobee
    • Google Nest
    • Honeywell Home
  • Video Doorbell:
    • Google Nest
    • Ring
    • SkyBell (DBCAM-TRIM2 via Total Connect 2.0)
  • Cameras:
    • Google Nest
    • Ring
    • TC2 Cameras via TC2 Integration (IPCAM-WIC1, IPCAM-WIC2, IPCAM-WOC2)
  • Security (Including Locks & Garage Doors):
    • August Smart Lock
    • ButterflyMX
    • EMTEK
    • Genie
    • Kwikset
    • Overhead Door
    • Resideo (Total Connect 2.0)
      • Vista Panels that support TC2
      • ProSeries Panels
      • Lyric Panels
      • Lynx Panels
    • Schlage
    • Yale
  • Music:
    • Sonos
  • Hubs:
    • SmartThings
  • Property Management:
    • Entrata
  • Motorized Shades:
    • Somfy
    • Hunter Douglas
Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

If you recall last week, we put out our 2020 holiday buying guide for smart home automation. Today, we wanted to focus on a very small aspect of that buying guide and explore some quick possibilities on how your can use some smart automated plug-in modules around the holiday season.


Plug-in modules couldn't be more convenient. You simply plug one into your standard outlet, enroll it with your smart home network (we like Z-Wave Plus), and connect the device(s) you want to control. And just like that, you can take virtually any connected device, and turn it into a smart device. The possibilities around the holiday season are particularly cool.

But before we get into some creative ways to use your plug-in modules, let's take a look at a few of our favorites. You should recall all of these from our buying guide if you read through that, but it never hurts to reintroduce them.

And we also want to give an extra special shout-out to the Resideo Z5SWPIO Z-Wave Plus Outdoor Plug-In Switch. Unlike the other three plug-in modules mentioned here, the Resideo Z5SWPIO is the only one that can be used OUTDOORS. This can certainly come in handy around the holiday season with lighting displays set up outside for the world to see. We can imagine many of you out there will want to bring smart automation to the holiday lights you've worked so hard on. You may as well do things right with an outdoor smart plug-in switch!

But across the board, the name of the game here is scheduling. If you want to have your lights turn ON and OFF automatically on a set schedule, then Z-Wave Plus plug-in modules are the way to go. Sure, you could rely on traditional timers and relays, but this makes things so much easier! And assuming you have your plug-in modules set up with your monitored security system, then all of this can be conveniently done through Total Connect 2.0 or Alarm.com. All you need to do is build a smart scene that sets a time for your devices to turn ON, and another for them to turn OFF later on. It's that simple.

Now, let's think about what you can include in these scenes. We'll start simple. How about your Christmas tree? Turn it into a Z-Wave Plus Christmas tree! This can be very nice if you are away from home for the holidays. By having your Christmas tree turn ON and OFF automatically, you can make it appear like someone is home, even if not a creature is stirring. If you have some other electronic holiday gear, then there's a great chance that it can be included in this setup as well.

If you really want to make things extra special, then get that Resideo Z5SWPIO Outdoor Module we talked about earlier, and use it to put your home's entire holiday lighting display on a schedule! Even if you're away seeking warmer weather, you can still have the best holiday display on the block. With Z-Wave Plus technology, you can ensure that your home lights up the cul-de-sac at night, and then safely powers down once morning arrives. You can even set specific scenes for sunset and sunrise to make scheduling a bit more customized.

And you don't even have to stop with the lights. If you have one of those giant inflatable outdoor snowman, then put that on your plug-in module too. As long as you don't exceed the load limit, then you're good to go! A few plug-in modules will really allow you to get wild. And it's all super easy to set up! If you have any questions about automation, then forward them over to support@alarmgrid.com, and we'll be happy to help. Our team is here from 9am to 8pm ET M-F to answer your questions. We look forward to hearing from you!

Tags: , , , , , , , ,

Comments


Posted By

Did you know that your Alarm Grid Security System most likely has smart home automation capabilities? While keeping your home or business safe with trusted monitoring service is the main function of an alarm system, the world of home automation is easily accessible and very exciting.

Qolsys iq lightbulb dimmable z wave lightbulb for iq and iq pane

As a quick recap for anyone who may not be familiar with automation or the concept of a "smart home", it refers mostly to two (2) somewhat related ideas.

1) Being able to control devices remotely (aka, while you are away from the premises).

2) Being able to have devices activate automatically based on a schedule and/or predetermined events, with no action required on your part.

These devices that we speak of are collectively referred to as "smart devices". There are all sorts of smart devices that you can integrate into your automation network. Some examples include:

  • Smart Lights - Illumination devices that you can control remotely and turn ON or OFF automatically. These come in many forms, including light bulbs, in-wall switches, plug-in modules, and even wall outlets. Smart lights are perfect for making it appear as though someone is present while away or on vacation.
  • Smart Door Locks - Access control devices that you can operate remotely and LOCK or UNLOCK a door automatically. These are typically deadbolt devices that prevent unauthorized individuals from gaining access to your home or business. In addition to remote operation, these devices can also be automated based on a schedule or the condition of other devices in your home.
  • Smart Thermostats - Temperature control devices that you can be adjusted locally or remotely and INCREASE or DECREASE the temperature. The operation of these devices can also be automated based on a schedule or event. These wire in directly with the HVAC system in your home or business. The setup is surprisingly simple, and it can be easily completed by a DIY user.
  • Smart Water Valves - Water shut-off switches that you can trigger locally or remotely. If you CLOSE the valve, then the flow of water will be stopped. If you OPEN the valve, then the flow of water will proceed when a faucet is activated. Smart water valves can be very important if the building is prone to flooding or water damage. These devices can be automated based on the activation of a flood sensor.

Now that you know a little more about smart devices, you're probably wondering how to get started. The first thing that we advise doing is selecting a smart protocol to build around. This refers to the type of wireless communication that the individual smart devices will use to speak with the centralized hub.

The smart hub, also known as the controller, is the single most important piece of equipment in any smart home. All of your individual smart devices will communicate their status with this centralized hub. And when you go to control your devices remotely, all incoming commands will pass through the hub before ultimately being forwarded to the individual device. Without the smart hub, home automation is impossible.

Honeywell lyric controller encrypted wireless security system

When you select a smart hub, you are also selecting the wireless protocol for your network. All of the individual smart devices in your network must use that same wireless protocol to communicate successfully with the main hub. As a result, your smart hub determines which devices can (and cannot) join the network.

A great aspect of most security systems sold by Alarm Grid is that they can double as smart hubs for your automation devices. The panels that we sell support the Z-Wave wireless communication protocol. Virtually any Z-Wave device can be enrolled with an alarm system that supports Z-Wave communication.

Once you have a Z-Wave device enrolled with your system, a few things become possible:

1) Operate your programmed Z-Wave devices on the main system display. This is the same place where you arm and disarm your system.

2) Control your programmed Z-Wave devices remotely using the same platform you use for controlling your system, namely, Alarm.com or Total Connect 2.0. This requires monitoring service.

3) Build complete smart scenes, in which multiple Z-Wave devices are controlled simultaneously. This is done through either Alarm.com or Total Connect 2.0. Again, alarm monitoring service is required.

While all of this certainly sounds exciting, we understand that it may seem a little daunting at first. If you are already an Alarm Grid monitored customer, then there's a good chance that your system is already capable of serving as a central hub for your Z-Wave network.

The following systems readily support Z-Wave communication, with no add-ons being required:

Additionally, the following panels can be upgraded to support Z-Wave communication:

Of course, there are other options besides Z-Wave for home automation. If you are an iOS user, then you might consider getting a security panel that can support the robust and powerful Apple HomeKit automation platform. The Honeywell Lyric is a great option for this. You can learn more about HomeKit in this prior post.

Another option for lighting control is the Lutron devices that use their own communications protocol. Lutron is known for their tight integration with Alarm.com, and they certainly make for a great starting point if you are looking to establish a smart lighting setup. More info on using Lutron with Alarm.com can be found here.


Alarm Grid is about more than just security. We can help you establish the perfect automation network for your home or business. Getting started with smart home automation is easy, and it's a fantastic way to get the most out of your security system. Whether you go with Z-Wave, Apple HomeKit, Lutron, or use a combo setup, we will be there to help you every step of the way.

If you aren't already monitored by Alarm Grid, now is a great time to get started. Smart home automation is included with all of our Silver, Gold, and Platinum Level Plans. This post will tell you all about our monitoring plans so that you can make an informed decision. Alarm Grid monitored customers are provided with free technical support online and over the phone. This includes helping you create the perfect smart home.

The best way for an Alarm Grid monitored customer to get help with all of their smart home questions is to email support@alarmgrid.com or call (888) 818-7728. Our support technicians will be happy to help you in building your smart home network. Remember that our business hours run from 9am to 8pm ET M-F, so make sure to plan accordingly. We look forward to hearing from you soon!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! Today, we are very excited to talk about the all-new Z-Wave Plus lighting products from Resideo. These lights are very easy to use, and they will work with nearly any security system that supports Z-Wave. They will certainly make a great addition to any growing smart home.


Resideo (formerly Honeywell and Ademco) has been long-known for their alarm control panels, sensors, and thermostats. But they really haven't made much of a splash in terms of smart lighting equipment. But that should change with these brand-new lights. The lineup has everything you need to create a robust and capable lighting setup.

All of these products use Z-Wave Plus technology to communicate with a central hub. We strongly recommend making sure your Z-Wave controller is certified for Z-Wave Plus so that you get the maximum wireless signal range. Some systems that support Z-Wave Plus include the Qolsys IQ Panel 2 Plus and the 2GIG GC3e. If you have monitoring service and access to Total Connect 2.0 or Alarm.com, then you can control your lights remotely and use them with smart scenes.

These devices are all super easy to program with your alarm system or other Z-Wave hub. When enrolling, you should always make sure to exclude the device from the network first. This will clear out any information and ensure that the device can be enrolled successfully. Then enroll the device by putting the controller into its inclusion mode and activating the inclusion function on the light. It should successfully pair with the network.

Now that you know a little bit about the lights in general, let's take a quick look at all of the new products individually:

  • Resideo Z5SWITCH - An in-wall light switch that is used to control hardwired lights or a ceiling fan. Replaces the existing in-wall switch.
  • Resideo Z5DIMMER - An in-wall dimmer switch that is used to control hardwired lights. The light bulbs must support dimming to be used in that manner. Replaces the existing in-wall switch.
  • Resideo Z53WSWITCH - An in-wall 3-way switch that is used with the Z5SWITCH and Z5DIMMER. You can use multiple Z53SWITCH devices to achieve up to a 6-way lighting configuration. Please note that a traveler wire is required for use.
  • Resideo Z5SWPID - A plug-in switch that is used for controlling a lamp or other connected device. It features a manual ON/OFF switch and a pass-through "non-Z-Wave" outlet.
  • Resideo Z5DIMPID - A plug-in dimmer module that is used for controlling a lamp. The light bulbs must support dimming to be used in that manner. It features a manual ON/OFF switch and a pass-through "non-Z-Wave" outlet.
  • Resideo Z5SWPIO - A plug-in switch that is suitable for outdoor use. Great for operating holiday lights or other outdoor lighting fixtures. It does not include a pass-through outlet.
  • Resideo Z5OUTLET - An in-wall AC outlet that provides Z-Wave Plus control to the connected device. The bottom port uses Z-Wave Plus, while the top port is always active. Replaces an existing outlet.

All of these smart lighting products are available right now from Alarm Grid! They're great for anyone looking to create a new smart lighting network or expand upon an existing one. If you have any questions about these new Resideo Lights, please reach out to us by emailing support@alarmgrid.com. We look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , , , , , ,

Comments