Schlage BE469 Posts

When it comes to alarm panels behaving as Z-Wave Controllers, it should be easy to determine if a device is compatible or not. However, we've found that in some cases, not all Z-Wave devices are equal. Z-Wave locks by Schlage have been known to have compatibility issues with certain panels.

Alarm Grid has often stated in our documentation that we prefer that our customers use the Yale or Kwikset Z-Wave locks. We've seen issues with Schlage locks over the years and we haven't really gotten satisfactory answers as to why. We've had customers tell us that they've worked with Schlage, and we have worked with Resideo and Honeywell Home. Sometimes they will work, but other times the customer winds up changing to a different lock manufacturer, or just not using the locks with their panel.

When you look at the most current Lyric Z-Wave Compatibility Chart, which is dated 05/19, and is an official document produced by Honeywell Home, it shows that Schlage Z-Wave locks are compatible. This information is based on engineering and quality assurance testing. But testing and daily use are two different things. Engineers can never think up every scenario to test, no matter how hard they may try. So, once a customer attempts to use the products together in their own home or business, some unforeseen factors may arise and cause issues.

We recently had a customer attempting to use a Schlage Z-Wave lock with a Lyric Security System. When the lock is paired with the panel, the batteries drain very quickly, within one to two weeks. When the lock is used as a stand-alone device, the batteries appear to have a normal life. So, we asked Resideo Technical Support for their input. They suggested that the Schlage locks not be used with the Lyric, ProSeries, or Tuxedo products at this time. There is some conflicting information, certain locks may work with the ProSeries panels while others do not, but it may be best to avoid Schlage locks with these panels for now unless you can wait to use the panel and lock together until the issues are resolved.

The Lynx Series panels appear to support the Schlage locks when the L5100-ZWAVE is employed, but certain conditions must be met. The lock and the panel must be within 12 inches of one another during the pairing process, and must remain at this distance for a full two (2) minutes before either is moved. This allows the full pairing process to be completed. Also, the handing process must be completed immediately following pairing. Resideo engineers are working with Schlage to resolve any issues with those panels that have them, and they hope to have a resolution some time soon, possibly in early 2022.

If you have any thoughts about Schlage Z-Wave locks and their use with any of the Resideo or Honeywell Home alarm systems, drop a comment in the area below and lets get a conversation started. We offer feedback directly to all our vendors on behalf of our customers. We're honored to be your voice.

Stolen packages are a concern for many individuals. But you can take a stand and prevent thieves from taking your stuff. All you need is a doorbell camera, a Z-Wave door lock, and a monitored security system with Alarm Grid. We'll help you protect your packages from pesky porch pirates!

It doesn't take a genius to figure out how a package gets stolen. The delivery person rings the doorbell and finds that nobody is home. They leave the package out in the open. Then a no-good package thief comes along, swoops up the goods, and you're then left wondering whether or not the delivery got lost in the mail. Countless packages fall victim to this very setup every single day. And if you don't have any evidence, then it can be next to impossible to catch the guilty party.

But there's an easy method to prevent this from happening to you. First, swap out your regular doorbell with a smart video doorbell camera. We recommend using one of the SkyBell Video Doorbell devices for this job. You can choose between a Total Connect 2.0 model and an Alarm.com model depending on which service you use with your system. Remember, you do not need special video monitoring service to get started with a SkyBell Video Doorbell. Total Connect 2.0 will allow a user to pair up to five (5) SkyBell devices per Alarm.com account, while Alarm.com provides support for one (1) SkyBell without true video monitoring service.

Next, configure your SkyBell device to work with your interactive service platform of either Total Connect 2.0 or Alarm.com. You can get push notifications on your phone whenever someone rings your SkyBell device. With the push of a button, you can pull up a live feed of the person at your door and communicate with them using two-way audio. When you see that it's the delivery person, greet them with a pleasant "Hello", and explain that you aren't home at the moment. Then invite them to step inside to drop off the package.

But how will the delivery person get inside? And how will they avoid setting off your security system? Easy. With a Z-Wave door lock, you can unlock the door, and you can disarm your alarm system using either the TC2 or ADC app on your phone. You might even consider making a smart scene to have your door automatically unlock as soon as your system is disarmed. Alarm Grid offers a wide selection of door locks to choose from. We recommend Z-Wave door locks, as they are super easy to program, and they can interface with nearly every modern wireless security system.

Once everything is in order, instruct the delivery person to go inside and leave the package near the door. If you're feeling extra groovy, you might invite them to grab a bottle of water from the fridge. It's hot out there, and your delivery driver would really appreciate the kind gesture. We'll leave that up to you though. If you don't want them walking through your house, then leaving a small snack or a tip by the front door will also show that you care.

Once the driver is gone, re-lock your door and re-arm your system. And just like that, you know that your package is nice and safe, and the porch pirate's plan has been foiled. It may also be a good idea to track any packages you order and know when you can expect them. Also make sure to take a good look at the delivery person when you let them inside. While fraudulent delivery drivers are very uncommon, they're not unheard of. If you're in doubt, instruct the driver to leave the package behind your house or behind some bushes so that you can retrieve it later. This is better than leaving the package wide open in front of your front door.

Of course, this setup will require monitoring service for accessing Total Connect 2.0 or Alarm.com. If your system isn't monitored, or if you don't have a security system, then Alarm Grid has you covered! We offer a wide selection of DIY security systems, including the Honeywell Lyric, the Qolsys IQ Panel 2 Plus, the 2GIG GC3e, and much more. We also offer monitoring plans for all budgets. This type of setup won't require anything fancy, and it's nothing that will break the bank. In the long run, it's worth it for your peace of mind!

If you want to learn more about Alarm Grid monitoring service, or if you have questions about protecting your deliveries, send an email to support@alarmgrid.com. We'll be happy to answer any questions or concerns you might have. Remember that our hours for checking email are from 9am to 8pm ET M-F. We look forward to hearing from you!

After our big return last week, we're back in a major way with 12 new videos this week! As our headquarters has only partially reopened, I had to try doing some videos again. But a familiar face has returned. We're sure you're eager to see who. Anyway, here come the new Alarm Grid videos!

Adjusting Z-Wave Device Limits On My Qolsys IQ Panel 2 Plus

I show you how to adjust the Z-Wave device limits on your Qolsys IQ Panel 2 Plus Security System. The Z-Wave device limits determine how many of each Z-Wave device type you can pair with the system. There are limits for thermostats, smart sockets, door locks, lights, garage doors, and "other" Z-Wave devices. The maximum total limit for all devices combined is 152 Z-Wave devices. You will need the Installer Code or Dealer Code (default 1111 and 2222, respectively) to change these limits. Also note that the Z-Wave device limit for Alarm.com is 122 Z-Wave devices.

Upgrading the Z-Wave Firmware for My Qolsys IQ Panel 2 Plus?

I show you how to upgrade the Z-Wave firmware for a Qolsys IQ Panel 2 Plus System. This is something you may want to do if the system is running a Z-Wave firmware of less than 6.81.03. At that Z-Wave firmware, you unlock the Smart Start feature for quickly adding Z-Wave devices, and you upgrade the system to the S2 security protocol for automation devices. Any Qolsys IQ Panel 2 manufactured with System Firmware Version 2.4.0 or higher (upgrading later doesn't count) will already have this Z-Wave Firmware Version.

Overview of the Smart Start Feature on the Qolsys IQ Panel 2 Plus

I talk about the Smart Start feature that can be used with any Qolsys IQ Panel 2 that is running Z-Wave Firmware Version 6.81.03 or higher. The Smart Start feature allows you to pair Z-Wave devices by scanning a QR code, instead of performing a traditional inclusion/exclusion process. As of June 2020, only a very limited selection of Z-Wave devices from Qolsys, Alarm.com, Eaton, and Danalock are compatible with the feature. But it can save you time if adding a large number of Z-Wave devices.

Using the Smart Start Feature on the Qolsys IQ Panel 2 Plus

I show you how to use the Smart Start feature on a Qolsys IQ Panel 2 Plus to add new Z-Wave devices. If your IQ Panel 2 is on Z-Wave Firmware Version 6.81.03 or higher and you have a compatible Z-Wave device, then you can use the Smart Start feature to add it to the Z-Wave network. Depending on the Z-Wave device, the QR code may be on the packaging or on the device itself. Some may have the code on both the packaging and the device.

How Many Z-Wave Devices are Supported on the 2GIG GC2 or GC2e?

I discuss the Z-Wave device limits for the 2GIG GC2 and the 2GIG GC2e. The classic GC2 has a standard Z-Wave controller, while the newer GC2e has an upgraded Z-Wave Plus controller. Both support the same Z-Wave devices, though Z-Wave Plus devices will get an extended range and battery life when used with the GC2e. The Z-Wave device limit for both systems is 232 Z-Wave devices, though it should be considered that adding a very large number of Z-Wave devices can diminish system performance.

How Many Z-Wave Devices are Supported on the 2GIG GC3 or GC3e?

I discuss the Z-Wave device limits for the 2GIG GC3 and 2GIG GC3e. Both of these systems have built-in Z-Wave Plus controllers for building an automation network of smart devices. Just like the "lower-end" 2GIG Systems, the GC3 and GC3e can support a maximum of 232 Z-Wave devices, though usually far fewer are actually used in practice. You should also keep in mind that Alarm.com has its own Z-Wave device limit of 122 devices. This means that only the first 122 Z-Wave devices paired with the system will get pushed over to Alarm.com.

Excluding the Kwikset Z-Wave Lock from the Lyric Controller

I show you how to exclude a Kwikset Z-Wave Lock from a Z-Wave network using a Honeywell Lyric Alarm System. Clearing the lock from the network will wipe out all of its residual Z-Wave data. This is normally done before adding the lock to the Z-Wave network, or when you need to delete it from the system. The Lyric can be used to clear the Z-Wave network data in the lock, even if the lock wasn’t paired using the Lyric to begin with.

Including the Kwikset Z-Wave Lock from the Lyric Controller

I show you how to pair a Kwikset Z-Wave Lock with your Honeywell Lyric Alarm System. This will allow you to control the lock from the panel and remotely from Total Connect 2.0 if the system is monitored and set up with the service. Normally, an exclusion process is performed before the inclusion process. Most Kwikset Locks have a simple button that is used for including and excluding. Pressing this button while the system is in its inclusion mode will include the lock into the Z-Wave network.

Excluding a Schlage Z-Wave Lock with the Honeywell Lyric

I show you how to exclude a Schlage Z-Wave Lock from a Z-Wave network using the Honeywell Lyric Alarm System. Just like most other Z-Wave devices, an exclusion process is normally performed either before adding the device to the Z-Wave network, or when deleting the device from the Z-Wave hub. For a Schlage Lock, you must access the programming code that is found on a white sticker underneath the lock's main cover. You will need a screwdriver to remove this cover.

Including a Schalge Z-Wave Lock with the Honeywell Lyric

I show you how to include a Schlage Z-Wave Lock to the Lyric's Z-Wave network. A Schlage Lock will follow the same process for inclusion as it does for exclusion. However, you will normally want to exclude the lock first to wipe out any residual Z-Wave data. To include the lock, simply enter the programming code on the lock's sticker, followed by the [0] key while the Lyric System is in the appropriate Z-Wave inclusion mode.

Enrolling a Z-Wave Lock to My Qolsys IQ Panel 2

In his triumphant return, the always fantastic Jorge shows you how to enroll a Z-Wave door lock to your Qolsys IQ Panel 2 System. This is done by putting the IQ Panel 2 into its Z-Wave inclusion mode and then activating the inclusion function on the lock. For most locks, you will want to clear the lock from the network to wipe its residual Z-Wave data before completing the inclusion process. The lock can then be controlled from the panel, as well as from Alarm.com if the system is monitored with access to the service.

Resetting an Interlogix Simon XT to Factory Defaults

This is an update from a previous video shot more than a year ago. Jorge shows you how to reset an Interlogix Simon XT System back to its factory default settings. This will reset the Master Code (1234) and the Installer and Dealer Codes (both 4321), delete any added codes and system zones, and restore all settings and configurations to their default values. It is important to note that if the option for "Phone Lock" in system programming is enabled, then certain settings will not be affected by the default.