Honeywell VISTA-21iP Posts

Posted By

You might be checking your calendar because it's Friday, and this is a video recap, and we usually save those for Mondays. Well we had four (4) videos from earlier this month that we never managed to recap, so we figured why not now? The topics today are VISTA Panels and the Tuxedo Keypad.

Honeywell VISTA System: Factory Defaulting

I show you how to Factory Default a Honeywell VISTA Security System. This process is very simple. You just get into programming with the command [Installer Code] + [8] + [00], with the default Installer Code being 4112. You can press [*97] to perform the default. The panel will beep three (3) times to confirm. You should also press [*96] to default the panel account and Computer Station ID (CSID). You can then press [*99] to exit programming. You can perform the default on an Alphanumeric Keypad, a Fixed English Keypad, or a Tuxedo Touchscreen Keypad in its Console Mode.


Honeywell Home Tuxedo: Local Scenes Using Sunrise & Sunset

I explain how you can create local smart scenes on a Honeywell Home Tuxedo Keypad to be set with time-based triggers for the local sunrise or sunset time. In the upper-right corner of the main Tuxedo screen, there is a weather display. If you click on this, then you can set the ZIP Code for the keypad. The Tuxedo will use this ZIP Code and its WIFI connection to get the daily sunrise and sunset time for any scenes set to trigger that way. If the Tuxedo loses its internet connection, it will just use the last recorded sunrise time and sunset time.


Honeywell Home Tuxedo: Setting Up Web Server & Remote Access

I show you how to set up web server access so that you can control the Tuxedo Keypad from a web browser. After setting up the feature by entering a username and password into the designated section of the Tuxedo, you can enter the Tuxedo IP Address into the web browser of an IP-connected device to access a login screen. The device used must be on the same network as the Tuxedo Keypad. Provide the username and password that you set up at the Tuxedo. This will open an interface resembling the old style Tuxedo Touch, and you can use that you control the Tuxedo and the connected VISTA.


Honeywell Home Tuxedo: Web Interface Cannot Include/Exclude Z Wave Devices

I explain that you cannot include or exclude Z-Wave devices when accessing the Tuxedo Keypad from a web browser, also known as the Tuxedo Web Interface or Tuxedo Virtual Interface. Although you can perform almost all of the same commands from the virtual Tuxedo Web Interface as you can from the Tuxedo Keypad itself, you cannot add or remove Z-Wave devices. This is because the necessary menu option for adding and removing Z-Wave devices is not present inside the Tuxedo Virtual Interface. You can only add and remove Z-Wave devices by interacting with the actual Tuxedo Keypad itself.

Tags: , , , , , , , , , , , , , , ,

Comments


Posted By

Another part of the Resideo booth at ISC West 2019 that we missed yesterday featured the new and upcoming LTE communicators for Resideo Alarm Panels. These cellular communicators will provide fast and reliable communication and allow users to control their systems through Total Connect 2.0.


As you may know, the 3G sunset is quickly approaching. If you want to keep your alarm system connected to the network into the distant future, you will need an LTE communicator. Cellular service providers like AT&T and Verizon have stated that they plan to support their LTE networks for many years to come. Getting an LTE communicator represents possibly the most important upgrade you can make for your security panel.

The Resideo Alarm Communicators will connect compatible systems with the company's AlarmNet Servers. This allows the end user to access and control their system through Total Connect 2.0. This is an excellent platform that allows users to arm and disarm their system, check current system status and control Z-Wave smart home devices.

Resideo showcased many AlarmNet LTE Communications. Most have a variety of different carrier options, which are AT&T, Verizon and Bell Canada. Many wireless Honeywell Panels were represented. The display featured communicators for the Lyric Controller:

The Lynx Touch L5210 and L7000:


The VISTA Systems:


And even the L3000 got some love:


If you didn't know, Alarm Grid already sells many of these communicators. The ones offered on our site include:

We are sure that Resideo users will achieve great results with these LTE communicators. Stay tuned to our blog for more content from ISC West!

Tags: , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We know that many users take on the task of setting up their own hardwired security system. We think this is great, as it really lets a DIY user get to know their alarm panel. But there are some extra tools we recommend for setting up a wired system. One of which is a voltmeter.

Honeywell vista 20p wired alarm control panel

All alarm systems require electricity for basic operation. But this electricity is used for more than just powering the panel. Various equipment like sensors and keypads will also require power. With hardwired systems, the peripheral equipment will actually draw power from the panel. Not only is the system's plug-in transformer powering the panel, it is also keeping its many devices running as well. If the electricity goes out, the panel should also have a backup battery to ensure that everything remains powered.

The important thing to understand is that plugging in a transformer does not suddenly supply an infinite amount of electricity for an alarm system. There's a limit to how much power a system can provide. Each transformer can only provide a limited amount of current. There are also current limiting devices like fuses and breakers that are built into each of the output circuits on a system. These are used to prevent things like the bell circuit, the battery charging circuit and the auxiliary power circuit from allowing enough current through to damage the system. If you try to add too many devices to a system, you may find that they will not work properly. Worse yet, if you don't use the specified transformer and other manufacturer-specified peripheral devices, you could cause serious damage to the system.

For smaller applications, this is not usually a major concern. But as you add more powered devices to an alarm system, the chance for overload becomes greater. You may need to add a second power supply, along with an additional transformer and battery. However, you shouldn't be working blindly. Using a voltmeter with the ability to read current (technically a multi-meter) is very important for knowing the current load and making sure that the current power supply is adequate.

A voltmeter works by applying a known amount of current and resistance to a circuit. Ohm's Law tells us that if you know any two of three values (voltage, current or resistance), you can then calculate the third value. A hardwired zone on an alarm panel works largely in the same way. Voltage, along with a small amount of current, is fed through a zone circuit. Based on the Ohm's Law principle, if you know the amount of voltage being applied, and you know the amount of current being applied, you can then calculate the amount of resistance that is present on the circuit. This is how a zone with an end-of-line resistor works. When you make a zone Normally Open or Normally Closed, you simplify things even further. If current is flowing, the zone is open. If current is not flowing, the zone is shorted or closed. Without a voltmeter, troubleshooting wired zones becomes much more difficult. The voltmeter doesn't even have to be a big expensive model. It just needs to provide basic function.

Also keep in mind that many system problems occur due to electrical issues. Having a voltmeter on hand can save a user a lot of hassle in troubleshooting. We hear of users all the time who don't know why their system isn't working, only to find that it is because they aren't supplying enough power. Performing a simple check with a voltmeter can help you discover an issue that would otherwise have gone unnoticed. For that reason, everyone with a wired panel really should invest in an inexpensive voltmeter or multi-meter.

If you're just beginning to consider purchasing a panel, and you don't want the hassle of worrying about wired zones, then a wireless system may be a better option. Wireless sensors operate strictly on battery power, and a user won't have to worry about overloading circuits. We generally recommend wireless systems for DIY users in general, as they are much easier to use and install. But if you do decide to go the hardwired route, or you already have a working wired system, we certainly recommend you keep a voltmeter on hand!

If you're an Alarm Grid customer, and you need help using a voltmeter to check your system, don't hesitate to reach out to us! We are happy to help monitored customers get their systems up and running and perform any necessary troubleshooting. We invite you to check out our monitoring page for more information. If you ever need help, you can send an email to support@alarmgrid.com. You may also call us at (888) 818-7728 during our normal business hours of 9am to 8pm EST M-F. We look forward to working with you!

Tags: , , , , , , , , , , , ,

Comments


Posted By

Anyone who has a Honeywell Security System knows that using and managing codes is very important for getting the most out of the system. This handy guide will show you everything you need to know about Honeywell System Codes, including how they are are used and how they are created.

Basic Information about System Codes

Note that the default Installer and Master Codes for almost any Honeywell System are 4112 and 1234 respectively. Let's start by reviewing basic concepts and information about system codes.

What is a system code?

A system code on a Honeywell Panel is a numeric password that is used to gain access to certain menus of the system and to perform various functions. The main reason that alarm systems have codes is to make sure that the person who is using the system is supposed to have access. Only the end user and any other individuals they have authorized to use their security system should know any of the system codes.

Depending on the type of code, a master user can restrict access to only specific parts of the system for other users. This makes some system codes more powerful than others. For Honeywell Systems, most codes are four-digits in length and use the digits 0-9. This allows for up to 10,000 possible combinations for any given code!

How should I choose a system code?

Any code you use on a Honeywell System should be a code that is easy for the user to remember, but difficult for others to guess. Remember, the purpose of a code is to prevent access to unauthorized users. If an unauthorized user, like an intruder, is able to provide a valid system code, it could result in a serious security breach. Likewise, if an authorized user forgets a code, it can be inconvenient or even impossible to get back in.

Most Honeywell Systems operate using delay periods. In other words, upon entering the premises, a valid code must be provided within a very limited time period to disarm the system. If a valid code is not provided within this specified time, then an alarm will occur. This will give an end user who knows a valid code enough time to disarm the system. But it will not give an intruder nearly enough time to brute force their way into the system by guessing codes.

What types of codes are used on Honeywell Systems?

There are many types of codes used with Honeywell Panels. The most common are outlined below:

  • Master Code: Each system has one Master Code. This is the main code a user will normally use for arming and disarming. It can perform all security functions, add and delete users, change the current Master Code and perform many additional system functions. This code cannot be deleted from the system entirely. Only the main user and operator of the security system should know the Master Code.
  • User Codes: Most Honeywell Systems can have multiple user codes set up. These codes can arm and disarm the system just like the Master Code. However, they cannot perform other system functions. A user code should be provided to a user who needs regular access to the building, but should not be able to adjust important settings and configurations for the alarm system.
  • Installer Code: Each system has one Installer Code. This is the main code that is used for making programming changes to the system. It is needed for adding, deleting and configuring sensors, adjusting entry and exit delay periods and more. Basically any major system setting will require the use of the Installer Code. An important note is that the Installer Code can only disarm the system if it was used to arm the system in the first place. This means that keeping the Installer Code at its default is not a security risk, as long as the code isn't used to arm the system. This code cannot be deleted from the system.
  • Guest Code: Also called a "babysitter code", a guest code is a restricted-access code that can be established on most Honeywell Systems. The important thing to remember about this code is that it can only disarm the system if it was the code used to arm in the first place. This code is best provided to users who need temporary access to the system, such as a house guest, a babysitter or a maintenance person. The main user can arm their system with the guest code so that they can access the premises. But if nobody else should be using the system, then the Master Code or a regular user code can be used to arm so that the guest code cannot gain access.
  • Duress Code: The duress code is a special code that is used to send a secret signal to a central monitoring station, letting them know that help is needed immediately. When this code is entered, it will appear to disarm the system like normal. But in reality, a distress signal will be sent out to the central monitoring station to request immediate help. This code is very rarely used, as its only purpose it to protect the user in hostage situations. Otherwise, this code should never be used. However, it is still important to remember this code, as it can save lives when used properly.
  • Arm Only: On select panels only. This code can arm the system, but it cannot disarm.
  • Partition Master: Only for systems with multiple partitions. This code is the same as a Master Code, but its authority only applies to a specific partition. This type of code is optional on a system, but it can be useful if multiple partitions have been established.

What are default codes?

When a Honeywell System is used for the first time, its Master Code and its Installer Code will be set to default values. For most Honeywell Panels, the default Master Code is 1234, and the default Installer Code is 4112. It is normally recommended that you change the Master Code for security purposes. However, the Installer Code can be left at its default so that the user can get back into programming. Keeping the Installer Code at the default does not present any type of security risk.

Now that we have covered some basic information for system codes, let's look into some specific panels to learn how codes are used.

Honeywell Lyric Controller

Honeywell lyric controller encrypted wireless security system

For the Lyric, codes are managed through the Users Menu. To access this menu, start from the main screen of the system. Choose Security > Tools > Master Code > Users. This menu will allow you to change any system code, with the exception of the Installer code.

Up to 48 unique codes can be added with the system. The code in slot 01 is the Installer Code. The code in slot 02 is the Master Code. The code in slot 47 is the Guest Code. The code in slot 48 is the duress code. All of the other 44 system codes are optional user codes.

Add New Codes

Press the "Add New" button. You can the provide a name for the code, enter in a valid four-digit code, and set whether or not the code can be used to control any Z-Wave door locks. The user number will be automatically assigned. Remember to press the "Save" button in the lower-right corner when you have finished.

Edit Existing Codes

Click on the code you want to edit to highlight it. Then press the Edit button in the lower-left corner of the screen. You can then edit the Name, the 4-digit numeric code and the Z-Wave lock settings for the code. Make sure to press "Save" when finished.

Delete Codes

Click on the code you want to delete to highlight it. Then press the Delete button in the lower-right corner of the screen. Press "Yes" when asked if you are sure. The code will be deleted.

Changing the Installer Code

The default Installer Code for the Honeywell Lyric Alarm System is 4112. We recommend keeping this code at the default to prevent the user from being locked out of programming. However, this code can be changed through programming if desired. You will need the current Installer Code to do this. You cannot do this using the Master Code.

Start from the main screen of the system. Choose Security > Tools > Installer Code (default is 4112) > Program > Installer Code. You can then change the Installer Code for the system. Press the "Done" button in the lower-right corner when finished.

Honeywell LYNX Touch Panels

Honeywell l5210 lynx touch wireless security system with 4 1 sla

Managing user codes for a Honeywell LYNX Touch System is very similar to the process for the Honeywell Lyric Controller. Most codes can be managed through the User Codes menu. To access this menu, start from the main screen, and choose Security > More > Tools > Master Code > Users. This menu will allow you to edit any system code, except for the Installer Code.

Please note that the number of user codes that can be added depends on the type of LYNX Touch Panel that is being used. On each system, the Installer Code will be user 01, the Master Code will be user 02, the Guest Code will be the second-to-last available code, and the Duress Code will be the last.

For reference, the L7000 will support up to 48 codes, the L5210 and L5200 will support up to 32, and the L5100 and L5000 will support up to 16.

Add New Codes

Click the "Add New" button at the bottom of the screen. The following menu will let you change the Name, the four-digit code and the Z-Wave lock settings for the code. The user number for the new code will be automatically assigned. Press "Save" in the lower-right corner to finish.

Edit Codes

Click on the code you want to edit to highlight it. Then press the Edit button in the lower-left corner. From there, you can change the name, the four-digit code, and the Z-Wave lock settings. Press "Save" in the lower-right corner when finished.

Delete Codes

Click on the code you want to delete to highlight it. Then press the Delete button in the lower-right corner. The panel will ask you if you are sure. Choose "Yes". The code will be deleted.

Changing the Installer Code

All of the LYNX Touch Panels use 4112 as their default Installer Code. This code is normally left at its default to prevent the user from being locked out of programming later. But it can be changed using the current Installer Code for the system if desired. Remember, keeping the Installer Code at the default does not present any type of security risk.

To change the code, start from the main screen of the system. Choose Security > More > Tools > Installer Code (default is 4112) > Program > Installer Code. You will then be able to change the Installer Code. Please note that when exiting programming, always choose "Yes" when asked you want to allow the installer to get back into programming. Choosing "No" will lock the user out of programming, and the user will need to use the backdoor method to get back in.

Backdoor Method for Accessing Programming

If you ever get locked out of programming, either due to choosing "No" when asked if you want to allow the Installer to get back into programming, or because you lost an Installer Code that wasn't set to the default of 4112, you can use the backdoor method to get back in.

First, reboot the panel by going to Security > More > Tools > Master Code > Test > Reboot. Alternatively, if you don't know the Master Code, you can power the system down by unplugging the transformer and disconnecting the backup battery. Then power it back on by plugging the transformer in. Once the white screen on the reboot appears, immediately press and hold the Home Button (the picture of the house) on the front of the panel. Release the button once the green bar with "Ready to Arm" appears across the top. Then choose Security, followed by Arm Stay. In the number pad that appears, press Clear, followed by 00. Choose "Program" to enter the Programming Menu.

Once you are inside, you can then set the Installer Code for the system to reenter programming later. You can also restore the system to factory default settings through "Default Config" to restore the system to its factory default settings. This will reset the Master Code to its default of 1234. Please note, this will also delete all programming settings for the system.

Honeywell VISTA P-Series

Honeywell vista 21ip internet alarm control panel open

The VISTA P-Series Panels use hardwired keypads for virtually all system operations and overall access. This includes adding, editing and deleting codes. Since codes do not require deep level programming, alphanumeric keypads and fixed English keypads can be used for this purpose. The VISTA 21iP and VISTA 20P can support up to 48 system codes. The VISTA 15P can support up to 32 system codes. The VISTA 10P can support up to 16 system codes. Remember, two of these slots will go to the Installer Code (slot 01) and the Master Code (slot 02).

For these systems, each Code Type is associated with a particular Authority Level. This Authority Level is assigned when assigning attributes. Please note that since the Installer Code and Master Code are hardcoded to slots 01 and 02 respectively, they are not associated with any particular Authority Level. The table below outlines the the Authority Levels that can be assigned to system codes.

Code Type
Authority Level
Notes
User 0 Can arm and disarm the system.
Arm Only 1 Can only arm the system.
Guest 2 Can disarm if it was the code used to arm.
Duress 3 Sends secret distress signal to station.
Partition Master 4 Partitioned systems only. One per partition.

Also note the various attributes for VISTA System codes:

Attribute
Attribute Number
Assigned Value and Notes
Authority Level 1 See previous table.
Access Group 2 0-8. An entry of [0] means no group.
Active Partitions 3 Enter the partition numbers, then [#].
RF Zone Number 4 2-digit key fob number.
Open/Close Paging 5 0 for No. 1 for Yes.

Add New Codes

Enter the following command on the keypad:

[Master Code] + [8] + [2-digit User Number] + [desired 4-digit code]

The panel will beep to confirm the new code has been added. However, a long tone indicates that the process was unsuccessful, likely because the code was already taken.

Edit Codes

This is basically the same as adding a new code, only you will be working with a code that has already been programmed.

[Master Code] + [8] + [2-digit User Number] + [desired 4-digit code]

The panel will beep to confirm that the code has been changed. But if a long tone is produced, it indicates that the process was unsuccessful. This could be because the code was already taken.

Deleting Codes

Note that you cannot delete the Installer Code or the Master Code. Enter the following command:

[Master Code] + [8] + [2-digit User Number] + [#] + [0]

Assigning Attributes

Enter the following command:

[Master Code] + [8] + [2-digit User Number] + [#] + [Attribute Number] + [Attribute Value]

Backdoor Into Programming

If you don't have your Installer Code or if you have locked yourself out of programming., you can get back into programming using the backdoor method. To do this, power down the panel by unplugging the transformer and disconnecting the backup battery. Press and hold the the [*] and [#] buttons on the keypad simultaneously. With these buttons held down, power the system back on by plugging the transformer back in. The message "20" or "Installer Code 20" should appear on the keypad to indicate that programming has been accessed. Then press [*] + [20] + [4112] to set the Installer Code back to 4112. Then press [*] + [99] to exit programming. Never use [*] + [98] to exit programming, as this will lock you out!

Honeywell LYNX Plus L3000

Honeywell l3000 wireless alarm control panelThe Honeywell LYNX Plus L3000 is relatively outdated by today's standards, but it is still used in some cases. The panel can only support up to 8 different codes. Much like the other panels, slot 01 goes to the Installer Code, and slot 02 goes to the Master Code. These codes cannot be deleted from the panel. Also, slot 07 goes to the Guest Code, and slot 08 goes to the Duress Code. Only codes 03 thru 06 can be assigned to regular user codes.

Adding a Code

Enter the following command:

[Master Code] + [8] + [Code Number] + [Desired Code]

The panel will beep to confirm success. Remember that [03] thru [08] can be entered for the Code Number.

Deleting a Code

Only codes [03] thru [08] can be deleted. Codes 01 and 02 are for the Installer Code and the Master Code respectively, and they cannot be deleted from the system. Enter the following command:

[Master Code] + [8] + [Code Number]

The panel will beep to confirm that the code has been deleted.

Editing a Code

Codes cannot be truly edited. Instead, a code must be deleted, and then re-added with a new entry. Start by deleting the code:

[Master Code] + [8] + [Code Number]

Then add the new code:

[Master Code] + [8] + [Code Number] + [Desired Code]

The panel will beep to confirm the code has been added.

Change the Master Code

This process is the mostly same as adding a new code. Note that the Master Code is assigned slot 02. Enter the following command:

[Master Code] + [8] + [02] + [Desired Master Code] + [Desired Master Code Again]

The panel will beep three times after a Master Code change.

Conclusion

We hope that this guide has been informative for you in learning all about codes of Honeywell Systems. In future, we hope to expand this guide to include the commercial polling loop VISTA Systems as well. If you have any questions, please reach out to us at support@alarmgrid.com, or call us at (888) 818-7728 from 9am to 8pm EST M-F.

Tags: , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! Did you know that Alarm Grid offers certified refurbished versions of some of the most popular Honeywell Security Systems and accessories? Our refurbished offerings work just as well as any new equipment. Going this route can be a great option for cutting overall system costs.

All of our certified refurbished equipment is sent to us directly from the manufacturer, Honeywell. It starts when the previous owner of an eligible piece of Honeywell equipment sends the product back to Honeywell for one reason or another. Honeywell will clean up the equipment, restore any defects and basically ensure that it works good as new. With Honeywell's strict oversight, the refurbished equipment is guaranteed to function exactly the same as any new equipment. We then purchase this equipment from Honeywell. Any customer who buys this equipment will have it professionally sent to them from the Alarm Grid headquarters.

In the highly unlikely event that the refurbished equipment does not function as it should, Alarm Grid offers a warranty protection in conjunction with the original warranty Honeywell put on the product. The original warranty will depend upon the manufacture date of the equipment. We will honor any remaining warranty from Honeywell that is left on the equipment, or we will offer our own warranty of up to 90 days, whichever is longer. While we are very confident in all of the refurbished equipment we offer, we fully understand that some customers will want some protective measures put in place before buying this type of equipment.

At this time, our refurbished lineup is restricted to four Honeywell products. However, we may decide to expand this lineup sometime in the future. Our team will make sure to let you know if any new refurbished products become available. The following products are currently available as certified refurbished versions:

If you have any questions about our refurbished products, please do not hesitate to reach out to us! You may email us at any time at support@alarmgrid.com. You may also call us during normal business hours, which are 9am to 8pm EST Monday thru Friday.

Tags: , , , , ,

Comments