DIY Security Systems Posts

It was a crazy day across the internet. Like a lot of other websites you might use, Alarm Grid was affected by the disruptions from the outage at Amazon Web Services (AWS). We wanted to let you know what happened, how it affected us, and the good news that things are getting back to normal.

What Happened?

According to Amazon, at around 3:11 AM EDT Amazon's huge AWS US-EAST-1 region (which is a massive data center in Virginia) started having issues. The first signs of trouble were increased latencies and error rates for sites and applications serviced by US-EAST-1. This regional data center runs a huge portion of the internet, so when it has a bad day, it can create a domino effect that takes down lots of services.

The crux of the problem appears to have been two-fold. Early in this event, at around 5:00 AM EDT, Amazon identified an issue with DNS resolution to the DynamoDB endpoint within the US-EAST-1 region. DNS or Domain Name System is how a URL like alarmgrid.com gets tracked down to its source IP address. By 6:35 AM EDT, Amazon reported that this issue had been fully mitigated.

The second source of trouble has to do with an underlying system designed to monitor the health of AWS load-balancing servers. It's unclear exactly what happened with this system currently, but mitigation efforts are progressing well for that issue as well. You're likely still seeing latency with some sites and apps that you visit. At 4:03 PM EDT, the AWS Health Dashboard said:

"Service recovery across all AWS services continues to improve. We continue to reduce throttles for new EC2 Instance launches in the US-EAST-1 Region that were put in place to help mitigate impact. Lambda invocation errors have fully recovered and function errors continue to improve. We have scaled up the rate of polling SQS queues via Lambda Event Source Mappings to pre-event levels. We will provide another update by 1:45 PM PDT."

How Did This Affect Alarm Grid?

Alarm Grid uses AWS in several ways to keep our website and services running smoothly. When AWS went down, it meant we had trouble with:

• Access to our site: The site alarmgrid.com has been unavailable at times, throughout the day today.
• Website features: You might have noticed our site was super slow, or that parts of our customer portal weren't loading at all. If you are attempting to place an order, you may see some issues. Please, retry any failed operation. You can reach out to support@alarmgrid.com if you need assistance.
• Our own support tools: Our web-based phone system was affected earlier in the day, but seems to have recovered as of now.

We know how frustrating this is, especially when you're trying to get something done. We sincerely apologize for the headache. Our site is up, but is still experiencing significant latency as of this writing. Rest assured, we're here and we'll help however we can.

Good News: Things Are Coming Back Online!

As of this afternoon, AWS says they've identified the issue and are well on their way to a resolution. We're already seeing our systems come back to life, and the Alarm Grid site should be getting back to normal.

What Wasn't Affected

Fortunately, monitoring services were apparently unaffected. We received no reported issues from our central station partners: Criticom Monitoring Service for customers in the United States, and Rapid Response for our Canadian customers. Alarm signal processing continued as usual. Likewise, the Total Connect 2.0 and Alarm.com remote services also appear to have been unaffected.

A Few Quick Stats on the Outage:

Just to show how big this outage was, at its peak, Downdetector.com showed nearly ten thousand reports for AWS. It also caused problems for major services like Snapchat, Ring, Roblox, Fortnite, and many others.

Due to an ongoing strike by the Canadian Union of Postal Workers (CUPW), the delivery of packages through Canada Post is currently suspended. As a result, Alarm Grid will temporarily use UPS to fulfill all Canadian orders until postal service in Canada resumes. It's unclear how long that may be.

This measure ensures that Canadian customers continue to receive their equipment and supplies without unnecessary delay. When we ship international orders, the cost of shipping is calculated at checkout, based on the postal code of the delivery address.

Once the strike is resolved and regular Canada Post operations resume, Alarm Grid will revert to our usual shipping methods for Canadian customers. You can check back here for an update as soon as that happens.

We appreciate your patience and understanding while this situation unfolds. Our team is monitoring the developments closely and will continue to prioritize fast and reliable delivery for all of our customers.

If you have any questions about your order or shipping options during this period, please contact us at support@alarmgrid.com. You can also take advantage of our live chat support by visiting alarmgrid.com and clicking the icon in the lower right portion of the screen. Chat support is available Monday - Friday from 9:00 AM - 6:00 PM Eastern, except on holidays. If you request support outside normal business hours, we'll respond via email as quickly as possible the next business day.

The Resideo PROSIX line of wireless sensors currently works with the PROA7, PROA7PLUS, and VISTAH3 panels. These encrypted sensors offer excellent range, reliability, and security. But to get the most out of your investment, it helps to follow some basic rules for installation and upkeep.

New to PRO Series sensors? This simple guide shows you how to place, pair, and care for Resideo PROSIX devices with your PROA7 or PROA7PLUS panel.

What To Do First

1. Plan install locations: Walk your home and decide where each sensor should be mounted. We'll talk more about mounting considerations next.
2. Name your zones: Make a short list like “Front Door,” “Kitchen Window,” “Hall Motion.” This makes setup quick and easy.

Sensor Placement Basics

Door/Window Contacts

• Protect any opening a person can reach from outside. If you’re on a budget, start with the highest-risk spots: ground-level doors and windows, especially those at the back of the home or in darker, hidden areas. Cover additional openings as your budget allows.
• Mount the sensor on the frame and the magnet on the moving portion of the door or window.
• Keep the magnet and sensor properly aligned and as close together as possible when closed. Check your model’s maximum gap specification and make sure the closed gap doesn’t exceed it.
• Avoid mounting directly on ferrous metal. If the frame is metal, use included spacers if provided. Aluminum doors usually don't pose a problem. A PROSIXCTV can be used to add a separate contact, such as the Honeywell 947-75T, that is made specifically for mounting on steel doors.

Motion Sensors

• Place on a wall or in a corner with a clear view of the room, about 6–8 feet high.
• Avoid pointing at windows, fans, or HVAC vents.
• Do not aim directly at heat sources (ovens, space heaters, sunny glass).
• If you have pets, follow the specific mounting instructions in the installation guide. The PROSIXPIRV offers up to 80 pound (36kg) pet immunity when the instructions for pet immunity are strictly followed. Generally speaking, mount where any animal, regardless of size, can't come within six (6) feet of the front of the sensor.

Glass Break Sensors

• Verify in the installation instructions that the PROSIXGB is suitable for the type and size of glass you want to protect.
• Mount the PROSIXGB in the same room as the glass to be protected.
• Avoid thick curtains or heavy drapes between the sensor and the protected glass.
• Set the sensitivity level for the PROSIXGB based on the distance between the detector and the protected glass.
• Mount on a wall or ceiling with a clear “line of sound” no more than 25' (7.6m) from the protected glass.

Tip: If you’re unsure about a mounting location, temporarily tape the sensor in place, finish setup, and test the glass break before permanently mounting.

How to Pair a PROSIX Sensor

1. On the panel, tap Menu (≡) > Tools > Installer Code (Default 4112) > Programming > Peripherals > + Key (upper right). The panel is now in listening mode.
2. Put the sensor into enrollment by pulling the battery tab on brand new sensors, or by opening the device's cover to activate the tamper.
3. Once the panel detects the sensor, give it a clear name, such as “Front Door” or “Living Room Motion.” Program any other sensor-specific fields, such as Response Type and Service for sensors that can use more than one zone, e.g., PROSIXCTV and PROSIXSMOKEV. For sensors with a single function Service will be filled automatically.
4. Be sure to click Save and close the sensor cover if the tamper was used to pair it with the panel.
5. Once you exit programming tap Menu (≡) > Sensors and check the signal strength of each PROSIX sensor in the location where it will be permanently mounted. Once a good communication path is confirmed, permanently mount each sensor and do a final signal strength check.

Important Note: If a sensor won’t enroll, confirm it isn’t paired to another panel. An unpaired sensor shows a rapidly blinking LED when you pull the battery tab, fault the sensor, or open the cover. A slow blink indicates the sensor is already paired. If possible, factory-default the sensor; otherwise, remove/release it from the previous panel, then enroll to the new one.

Battery Care

• Use only the battery type listed on the sensor’s Install Guide, or Data Sheet.
• Always remove all batteries, wait a full ten seconds, then insert new batteries. This helps to clear any low battery signal. Always read the sensor instructions for any special notes about installing new batteries. For example, the PROSIXCMBOV requires that all new batteries be installed within 15 seconds of beginning the battery install process.
• For sensors with multiple batteries, always change all batteries at the same time. Don't mix old and new batteries and don't mix batteries from different manufacturers.
• You can check the battery level of other sensors by tapping Menu (≡) > Tools > Installer or Master Code (4112 and 1234 by default, respectively) > System Test > Test Sensors > Start Test > OK. The siren will sound for a few seconds. Go around and fault each sensor. Then check the panel for the signal strength and battery level of all tested sensors. If any other sensor batteries are low you can go ahead and change them to prevent future low battery messages on the panel.

Important Note: PROSIX sensors use two-way supervision, meaning they require an acknowledgement (ACK) from the panel after sending a check-in signal. If the panel is powered down or removed, a sensor will repeatedly attempt to check-in, quickly draining its battery. To preserve battery life, remove the batteries from your PROSIX sensors whenever the panel will be out of service for an extended time.

When powering the system back up, always power on the PROSIX transmitters before the PRO Series panel. The panel uses Frequency Agility to select the best RF channel and then instructs the sensors to follow. If the panel changes channels while the sensors are still off, they won’t receive the update. This leaves them in a state of limbo, unable to communicate with the current panel or with any new or defaulted panel.

Monthly Test

1. Put the system in test mode with your monitoring company if you subscribe to full monitoring. You'll need to provide your name, address, and false alarm password, as well as a duration for the test.
2. Enter the panel's Walk Test Mode.
3. Open and close each protected door/window and confirm it shows on the panel.
4. For motion detectors, follow the sensor's instructions for entering Walk Test Mode. For the PROSIXPIRV remove and replace the batteries. This removes any transmit inhibit designed to conserve battery life and enables the sensor LED. The motion will remain in Walk Test Mode for ten minutes. Walk in front of each motion sensor and verify you see it trigger when you walk in the protected area.
5. For glass break sensors, we linked above to an FAQ on using the Honeywell FG701 to perform a functional test. The FAQ is written describing the steps with a Honeywell 5853, but they translate to the PROSIXGB very well.
6. Exit test mode and confirm the system displays the proper status with no trouble conditions present.

Safety and Mounting Tips

• Use the included screws for permanent installs where possible.
• Clean the mounting surface before using double-sided foam tape. Press firmly in place for a full 30 seconds.
• Keep sensors dry and indoors unless the model is rated for outdoor use.

Quick Reference: Which Sensor Goes Where?

Keep Your Panel Updated

Connect your panel to WIFI so it can receive the latest over-the-air (OTA) firmware updates. The PRO Series panels will not download firmware using cellular data. The PROA7PLUS comes from the factory with the PROWIFIZW installed. The PROA7 comes with no built-in communicator, so it will need to have a PROWIFI or PROWIFIZW added.

Firmware updates can improve stability and sensor compatibility. When firmware updates for PROSIX sensors are available, they are included in the panel's firmware package. Once the panel updates, the sensor firmware will be pushed by the alarm panel to each sensor.

Need a Hand?

Alarm Grid supports DIYers every day. If you want help selecting, placing, or pairing PROSIX sensors, we can help. We provide free technical support to our monitored customers M - F from 9:00 AM - 8:00 PM Eastern Time. You can reach us by calling 1-888-818-7728 or via email at support@alarmgrid.com.

Update 12:30 PM EDT: Total Connect 2.0 Email Notification Issue Resolved

This morning, Resideo identified and resolved an issue that was affecting Total Connect 2.0 email notifications. The temporary problem was caused by a third-party vendor, Mailjet, and may have prevented the delivery of system notifications, password reset emails, and welcome messages.

Apparently, the undelivered email messages were queued, and when service was restored these messages went through. This may cause some Total Connect 2.0 notifications to arrive out of sequence until all queued messages are delivered. Any time you receive a notification that you question, log into Total Connect 2.0 and check the Activity screen as well as the current status page. You can also check the panel's Event Log from the touchscreen by tapping Menu (≡) > Events.

Who Was Affected?

The service disruption was reported at approximately 8:44 AM EDT. If you were expecting an email from Total Connect 2.0 this morning and did not receive it, you were likely affected by this brief outage.

Why Redundancy Matters

This incident highlights the importance of enabling multiple notification methods. We strongly recommend setting up push notifications on your mobile device as a reliable backup. For customers affected by today's email issue, push notifications would have still been delivered successfully, ensuring no critical alerts were missed.

As of approximately 12:30 PM EDT the issue has been resolved. If you're an Alarm Grid monitored customer and you continue to have any issues receiving email notifications for TC2 alerts, you can contact our support team by calling 1-888-818-7728, M - F 9:00 AM - 8:00 PM. You can also email us at support@alarmgrid.com.

Resideo recently announced that its VISTA and PRO Series panels are now fully certified to integrate with Control4 whole-home automation. Control4 is a premium automation platform, typically available only through authorized Control4 integrators, and it operates by using specialized drivers

Control4 drivers act as the essential software that enables communication between the Control4 automation system and various third-party devices. A certified Control4 driver allows for seamless integration and centralized control of different smart home products through the Control4 interface. The interface can be a touchscreen, an app, or even voice commands. For homeowners and installers, this means a unified experience where security, lighting, entertainment, and more can be managed from a single platform.

For homeowners, the benefits are clear. A certified integration allows the Resideo First Alert panel to do more than just secure the home, it becomes part of a larger ecosystem. Using Control4, you can arm the alarm system at night while having the doors lock automatically, the thermostat adjust to an energy-saving setting, and the lights dim across the house. That’s the type of seamless, one-touch automation that Control4 is known for, now enhanced with the proven reliability of a Resideo First Alert security system.

For dealers and installers, certification reduces guesswork and support headaches. Instead of relying on custom workarounds, they can now use official drivers that are tested and verified. This not only speeds up installation but also builds dealer confidence, by knowing their installations are backed by two major industry players working together.

The move also positions Resideo strongly in the high-end automation space. By joining the ranks of other security systems officially supported by Control4, VISTA and PRO Series panels are now a more compelling option for projects where premium automation is a requirement. It’s a win for integrators looking to expand their offerings, and a win for homeowners looking to unite all of their tech through a single interface.

VISTA panels use the 4232CBM Connected Building Module to integrate with Control4. The module connects the VISTA panel's ECP bus to the Control4 system through a wired serial RS232 or RS422 interface. This setup allows the Control4 driver to import zone alpha descriptors directly from the VISTA panel, which eliminates the need for manual programming of zone data within Control4. As a result, users can arm, disarm, and monitor the status of zones directly through the Control4 interface. Check out the 4232CBM Install Guide.

Another plus that shouldn't be overlooked is the fact that Control4 will import life-safety zones and descriptors. This allows an integrator to create automations based on fire or carbon monoxide zone triggers. For example, in the event of a fire alarm the system might automatically turn off the HVAC system and unlock the doors while turning on lights that illuminate a path out of the building.

Control4 and First Alert PRO Series Integration

You can find the steps for integrating the PRO Series panels with Control4 here. Here's a quick overview of what you'll need:

Before You Begin:

• Control4 OS 4.1.0+ and Composer Pro Software.
• PRO Series Firmware 03.2476.183+
• PRO Series panel must have a PROWIFI or PROWIFIZW installed.
• PRO Series panel should have all its partitions and zones configured before pairing with Control4, though you can add or remove zones after initial configuration.
• Your alarm dealer must enable the Control4 feature through AlarmNet360. This is done as part of the Smart Home package (Packages > Smart Home > Add-Ons > Control4).
• The Control4 system and the PRO Series panel must be connected to the same network through the same router.

After configuration with Control4’s Simple Service Discovery Protocol (SDDP), the PRO Series panel must always use the same IP address. SDDP is a lightweight protocol created by Control4 that lets WIFI enabled devices announce themselves on the network, making it easy for Control4 to find and identify them.

If the panel’s IP address changes, it will disconnect from Control4. Because setting a static IP directly on the alarm panel can be tricky, the better option is to reserve an IP address for the PRO Series panel in your router’s DHCP settings. Check your router’s documentation for instructions on how to set this up. Below is a list of names for this feature, and which manufacturers use each term:

• DHCP Reservation – Netgear, ASUS, TP-Link (most common term)
• Address Reservation – D-Link
• IP Reservation – Linksys, Spectrum, Xfinity
• Reserved IP Address – Some ISP-provided routers (AT&T, Verizon)

Basic Steps For Setup:

1. Initiate discovery. From Control4 Composer Pro, initiate discovery (System Design > Items > Discovered).
2. Create association. Double click on the PRO Series driver that you discovered in Step 1. If Composer Pro fails to discover the driver, make sure that all the prerequisites listed above have been met. Once the driver has been discovered and you double click, the driver is downloaded to your Control4 system. The panel's IP and other required information is sent to Composer Pro. The driver and the IP address can then be associated with one another within Composer Pro.
3. Perform pairing. Within Composer Pro, click Actions > Start Pairing. You have 120 seconds to complete the next step. If two minutes elapse without a successful pairing, the process will timeout and you'll need to perform this step again.
4. Pair PRO Series panel. On the PRO Series panel, tap Menu (≡) > Tools > Enter Installer Code (4112 by default) > Control4 Controller > Pair to Control4 Controller. When Composer Pro receives the pairing command, it will know, based on the panel's IP address, to associate the PRO Series driver with the panel and complete the pairing process. If the pairing is successful, the Control4 Controller information will automatically populate. If pairing fails this field will remain blank. In that case, verify that all of the requirements in "Before You Begin" have been met, and try again.

Complete Integration:

1. Verify partition import. In Composer Pro select Properties. Partition information will be displayed here as the information is imported. Upon successful import, the partition state will update from "Unknown" to the current state. This process may take a minute, so please be patient. Verify that all partitions, along with proper status, are displayed in the left pane.
2. Import and verify zone information. From Advanced Properties within Composer Pro select Get C4 Contacts to update and display individual PRO Series zones with proper status. The zones will also show in the left pane. When a zone is added (or removed), it will show which zones have been added or deleted there.
3. Verify visibility. From a Control4 touchscreen, or the Control4 app, tap Security and verify that all partitions and zones are displayed. If a partition appears to be missing, check the visibility settings for that partition within Composer Pro:
   • In the left pane select PRO Series > Properties > Navigator.
   • Select Security in the navigator menu. This will display the Device Visibility settings. Partitions are either "Visible" or "Hidden". If any partition that should be visible within Control4 is listed as hidden choose the Modify option and move that partition from Hidden to Visible.
   • Click File > Refresh Navigators to update and display all partitions. Any partition that remains listed as hidden will not display on any Control4 touchscreen or within the Control4 app. Presumably, it will also remain hidden to any voice assistant you may be using.
4. Test integration. Once the previous steps have been completed successfully, use the Control4 touchscreen or app to verify operation and status. Verify that all partitions show the proper status, i.e., Armed, Disarmed, etc. Walk around and fault zones, i.e., open and close doors, walk in front of motion detectors, etc. and verify that the status updates within the touchscreen or app.

Resideo is about to launch three new surveillance cameras: the CX4B bullet, CX4T turret, and CX4D dome. Each model features impressive 8MP resolution with an advanced image sensor, ensuring a clear view of faces, license plates, and other important details for clear and dependable viewing.

Resideo has announced that the new CX4 cameras are expected to arrive in late Q3 or early Q4 of 2025. Alarm Grid will have them listed and ready to order as soon as they’re released. For now, you can click the links below to view each camera’s product page, but purchasing isn’t available just yet — stay tuned!

New First Alert CX4 Cameras

If you haven’t been following Resideo closely, you might be surprised to see these cameras branded as First Alert. When Resideo spun off from Honeywell, it originally used the Resideo name, a portmanteau of “residence” or “residential” and “presidio.” Most readers will recognize “residential,” but for reference, Merriam-Webster defines a presidio as “a military post or fortified settlement.”

Traditionally, Honeywell Home branding has been used for Resideo’s residential products, while the Resideo name identified commercial offerings. Over the past year, however, the company has shifted to the First Alert brand. First Alert has been established for decades and offers strong name recognition, without tying back to Honeywell, which is now a separate entity.

Important Note: All the cameras pictured below are shown mounted with junction boxes. Any junction box used must be purchased separately.

Each of these cameras have the following features:

• Smart AI motion analysis helps identify genuine activity and minimizes false alerts, so you're notified only when it truly matters.
• High-definition 8MP imaging captures fine detail, ensuring reliable recognition of people, license plates, and objects.
• Flexible video storage with built-in edge recording plus secure cloud event archiving, gives you control over how footage is kept and accessed.
• Wide operating temperature range allows dependable performance in harsh environments, from -22°F - +140°F (-30°C - +60°C).
• Seamless system integration with ProSeries AIO and VISTA®H3 panels, while Total Connect® 2.0 and AlarmNet 360™ apps deliver full remote control and monitoring convenience from any location with internet access.

First Alert CX4B Bullet Camera

We don’t yet have specifications on these cameras, but generally speaking, bullet-style cameras are often optimized for longer viewing distances as compared to dome cameras. They are ideal for monitoring driveways, parking lots, and perimeters. Once mounted, these cameras typically can’t be adjusted remotely.

First Alert CX4T Turret Camera

The First Alert CX4T blends the flexibility of a dome with the clarity of a bullet. With no domed housing, issues with glare, scratches, or IR reflection are eliminated. Turret-style cameras are Ideal for both indoor areas like offices, retail spaces, and hallways, and outdoor spots including porches, entrances, parking lots. The CX4T will likely be suited for both wide-angle and medium-range surveillance. It's ideal for areas where facial recognition and detail are important, especially at night. We'll have to wait and see if remote camera repositioning is a possibility. Turret-style cameras are often limited to manual adjustment.

First Alert CX4D Dome Camera

The CX4D Dome Camera combines durability with a discreet look, making it perfect for both indoor and outdoor spaces. Unlike the more visible bullet camera or the more easily adjusted turret, the dome’s protective housing makes it more difficult to adjust after installation. However, the exterior dome helps guard against tampering, particularly when mounted outdoors. With wide coverage and built-in resiliance, it’s an ideal choice for monitoring lobbies, storefronts, hallways, and other high-traffic areas where both performance and aesthetics matter.

These are the most professional cameras yet from Resideo that work with its Total Connect 2.0 remote platform. With edge and cloud storage, you have flexible options for monitoring and saving AI-based video alerts. The cameras can differentiate between people, vehicles, animals and packages to provide notifications tailored to your needs.

If you’ve followed the Tuxedo keypad over the years, you know the weather feature has had its ups and downs. First introduced, then paused, then brought back again, it’s been quite a journey. Now, Resideo has confirmed that weather updates will no longer be supported on certain Tux models.

The announcement earlier this week confirmed that the TUX, TUXWIFIS, and TUXWIFIW will no longer support the weather display after August 15, 2025. However, the Honeywell Home TUXEDOW and Resideo TUXEDOWC, the newer touchscreens for the VISTA-21IPLTE, VISTA-20P, VISTA-15P, and VISTA-128BPT, will continue to support the feature.

If you’ve programmed automation scenes that use “Sunset” as a trigger, those automation scenes will no longer function on the affected TUX models. For example, if you have lights set to turn on automatically at sunset, that scene will no longer work now that the weather service is discontinued. The TUXEDOW and TUXEDOWC will continue to support "Sunset" as an automation trigger.

Quick Facts:

Which models no longer support weather as of August 15, 2025?

• TUX
• TUXWIFIS
• TUXWIFIW

Which models still support weather?

• Honeywell Home TUXEDOW
• Resideo TUXEDOWC

What happens to my sunset scenes?

On affected TUX models, automation scenes that use “Sunset” as a trigger will stop working (e.g., lights set to turn on at sunset will no longer automatically do so).

What should I do if I’m affected?

If you rely on weather or sunset triggers, consider upgrading to a TUXEDOW or TUXEDOWC. If you don’t use those features, no action is required.

If you are an Alarm Grid customer and you have questions or need assistance, you can contact us at support@alarmgrid.com. Our support hours are Monday - Friday, 9:00 AM - 8:00 PM Eastern Time. Our support number is 888-818-7728.

The problem outlined in this notice arises if you attempt to pair an older firmware ProSeries touchscreen keypad to a newer or recently updated ProSeries panel. If the keypad is on version 3.324.46 or lower, and the panel is on 03.3206.57+, then the keypad won't pair and ceases functioning.

ProSeries keypads, specifically the PROWLTOUCH and PROWLTOUCHC, may require a special upgrade process to install the latest firmware in certain cases. Normally, these keypads receive updates from the ProSeries panel. However, if the keypad can’t pair with the panel, or loses connection, it won’t be able to receive the update.

If you have a ProSeries panel and touchscreen keypad that stay paired, connected to WIFI, and in regular communication most of the time, you shouldn’t have any issues. When the panel updates its firmware via WIFI, it will pass along any available update to the keypad automatically. If your keypad has trouble staying connected, you may want to set it up using Access Point (AP) Mode. This helpful FAQ can show you how.

As we mentioned earlier, most users won’t run into this issue. However, certain situations make it more likely. For example, if you buy a used ProSeries touchscreen keypad, or if you purchase one from stock that has been sitting on the shelf for a long time, you may encounter the problem.

If your panel hasn’t been updated regularly, jumping from an older firmware straight to the latest release can cause the issue described above. It can also occur with panels that have been installed for a long time and communicate with AlarmNet360 only over cellular.

If your system has a PROWIFI or PROWIFIZW module, the panel and keypad may have been paired using AP Mode. Since the panel can’t update firmware over cellular, suddenly connecting it to WIFI could trigger an upgrade to the latest version, potentially leaving the keypad behind on older firmware.

If you purchase a new keypad that has been sitting in stock, and you discover it suffers from this issue, you should be able to return it to the dealer or distributor for a refund or replacement. However, if you buy a used keypad, inherit one with a home purchase, or receive a second-hand keypad as a gift, you may need to follow specific steps to update it. The first step is to check the firmware version.

Our Advice: If you’re considering buying a used touchscreen keypad, ask the seller to verify its firmware before you commit. Request a picture of the firmware screen as proof. Even if the keypad isn’t paired to a panel, you can still see its firmware version.

To check the firmware, power on the keypad and let it attempt to connect to a panel. Press "Pair to Panel". On the next screen, you’ll see options for connecting the keypad to WIFI. At the bottom of that screen, the current firmware version is displayed.

Once you know the keypad firmware, verify your ProSeries panel version. On the panel begin by tapping the Menu icon (≡) at the bottom center of the panel screen. Scroll down and tap Tools > Enter the Installer or Master Code (4112 or 1234, by default) > tap System Information > General. The panel firmware version will be displayed in a XX.XXXX.XX format.

If the keypad is on version 3.324.46 or lower and the ProSeries panel is on firmware version 03.2306.57 or higher, the touchscreen keypad will not pair with the panel. There is no way to make the keypad in this example pair with a panel at that firmware version. However, the keypad will still function if it is used with a panel on a lower firmware version that is then upgraded properly.

Important Note: You cannot downgrade the firmware on a ProSeries panel, per Resideo support.

Another drawback to this situation is that an end-user can't control when their panel updates, or to what version. The only control you have as an end-user is that if you remove your ProSeries panel from WIFI, it will not receive firmware updates. These panels don't update using cellular data.

Important Notes At A Glance:

• Keypads on v3.324.46 or lower can’t pair with panels on v03.2306.57 or higher.
• ProSeries panel firmware can’t be downgraded.
• Panels update only over WIFI, not cellular.
• Disconnecting WIFI stops panel updates.
• Check firmware before buying a used keypad.
• Contact your alarm dealer for upgrade help.

If you're a customer with concerns about this potential issue, contact your alarm dealer. They will be able to push the necessary upgrades to your ProSeries panel in the correct order. Alarm Grid has a list of customers with touchscreen keypads that may be susceptible and we are proactively reaching out via email or phone to those customers. If you are not an Alarm Grid customer your alarm dealer should have a similar list.

We would like to inform you about a temporary delay affecting some recent orders. Due to a major system upgrade on our vendor’s end, certain shipments are taking a little longer to process than usual. This may affect orders placed between Thursday, the 24th at noon, and today. Orders placed in the next couple of days may also be impacted.

Please rest assured—if you selected fast or expedited shipping, your order will still ship using that method and will arrive as quickly as possible once processed.

We are actively working with our vendor to move orders through the system and get them out the door as quickly as possible. We’re confident this situation will be short-lived and we’re here to support you every step of the way.

If your order is past the expected timeframe outlined in our shipping policy, feel free to reach out by emailing us here. This will open a support ticket and our team will get back to you as soon as possible.

Thank you for your patience and continued support of Alarm Grid. We will continue to provide any further updates as we receive them.

As we told you in February, Resideo is sunsetting first-gen Total Connect 2.0 cameras. After July 31, 2025, they’ll no longer work in TC2 and will be removed from all accounts. Any recorded clips will also be deleted. Be sure to download and save any important footage outside of TC2 now.

The sunsetting of first-gen Total Connect 2.0 cameras is now just days away. If you still have any of the original TC2 cameras on your account, you should be preparing to replace those cameras with new ones. Otherwise, you will lose video coverage in those areas.

Even more important is downloading any critical video clips uploaded from first-generation cameras. Once the sunset occurs, both the cameras and their recorded footage will be removed from Total Connect 2.0 and will likely be unrecoverable.

It's easy to save these video clips from Total Connect 2.0.

1. Log into TC2 as normal.
2. Tap Activity from the menu options at the bottom of the screen, or from the left navigation pane, if you're logged in on the website.
   
   
3. From the Activity screen, find the clip you want to save.
4. Tap the three dots to the right of the clip title and then choose Download.
5. In iOS you can access your downloaded clip from Photos. In Android devices, the options may vary depending on device manufacturer, but generally you can access the clip from Files (All or Downloads) and from Gallery:
   
   
   
   

   ---

   
   



Recommended VX Series Replacements for EOL Cameras

Product Name	Recommended Replacement
IPCAM-WI	VX5 Indoor Camera
IPCAM-WI2	VX5 Indoor Camera
IPCAM-WL	VX5 Indoor Camera
IPCAM-WO	VX3 Outdoor Camera
IPCAM-PT/IPCAM-PT2/PT2A	One or More VX5 Indoor Cameras
ACU	Replace ACU and Camera with appropriate Indoor or Outdoor VX5 Camera
AP/WAP-PLUS/WREX	No Replacement Available

The first Total Connect 2.0 cameras did their job well after launching in late 2011 or early 2012, but video tech has come a long way since then. Today's AI motion detection is way better than the old method of analyzing pixel-changes. The newer cameras, such as those in the table above, use AI to actually tell the difference between a person and an animal, for example. With all the available improvements, it makes sense to phase out the original cameras.