2GIG Edge w/ Verizon LTE Posts

It's time for the Alarm Grid Video Recap! There are five (5) new videos this week. For the first time in awhile, I did not appear in any videos. I'll hopefully be back next week. Instead, Jorge really took over, doing four (4) videos. Julia also made a rare video appearance. On with the show!

2GIG Edge: Pair the 2GIG PAD1-345

Jorge shows you how to pair the 2GIG PAD1-345 Keypad with the 2GIG Edge. The PAD1-345 is a very basic keypad device that has been around since the days of the 2GIG GC2. As a very limited keypad, the PAD1-345 can be used to arm/disarm and trigger system panics. The 2GIG PAD1-345 cannot be used to bypass sensors, and it also does not display system status. Additionally, the PAD1-345 can only control the system partition that is has been assigned, and it cannot "switch" to other partitions.

2GIG Edge: Finding the IMEI Number

Jorge shows you how to find the IMEI Number on a 2GIG Edge Alarm System. When working with a 2GIG Edge, the IMEI Number may also be referred to as the panel's Serial Number. This is an important piece of information that you need when activating the system for alarm monitoring service. It is associated with the panel's built-in cellular communicator, which is registered with Alarm.com as part of the activation process. All outbound signals for the 2GIG Edge are sent through Alarm.com.

2GIG Edge: Connect to WIFI

Jorge explains how to connect the 2GIG Edge to a WIFI network. The 2GIG Edge can use WIFI connectivity as a secondary pathway for communicating with Alarm.com. However, WIFI cannot be the only communication pathway, as Alarm.com requires that a cellular communication path is configured and set up with their servers. Most users will configure the WIFI pathway anyway, as most monitoring providers will not charge extra for internet monitoring, and almost all homes and offices have WIFI readily available.

2GIG Edge: Sending a Cell Test

Jorge teaches you how to perform a cell test on a 2GIG Edge Security Panel. A cell test is performed at the end of the system's activation process, as a way of verifying communication with the Alarm.com servers. You may also perform a cell test at any time after the activation to ensure that the system is still communicating properly. As part of the cell test, the system checks that it can successfully send signals to the Alarm.com servers, and also successfully receive incoming signals from Alarm.com.

2GIG GC2: Updating Firmware Using Updater Cable (UPCBL2)

Julia teaches you how to update the 2GIG GC2 using the 2GIG UPCBL2 Updater Cable. Normally, the easiest way to update a GC2 is to activate the system for monitoring service, and then push down an over-the-air (OTA) firmware update from Alarm.com. But if you have an old GC2 that is not on a high enough firmware version to get connected with Alarm.com, then you must update using the Updater Cable or the 2GIG UPDV Easy Updater Tool. Alarm Grid also has a 2GIG GC2 Firmware Updates Page that you can check out.

We want to inform 2GIG Edge users, especially those who may install their own system, to a special warning put out by 2GIG. The warning identifies a potential wiring mistake that could result in permanent damage to the 2GIG Edge Alarm Panel. The entire warning put out by 2GIG can be seen here.

The 2GIG Edge receives primary power from the 2GIG AC1 Plug-In Transformer. This transformer is rated at 14VDC, 1.7A. You must add your own alarm wire to complete the connection. Since DC power is being used, proper polarity must be observed, both at the transformer and at the panel. At the transformer, the red wire should connect to positive (+) terminal, and the black wire should connect to the negative (-) terminal.

Then, at the panel, the red wire for positive (+) power should connect to the DC IN+ terminal. The black wire for negative (-) power should connect to the DC IN- Terminal. Or alternatively, if you are using a Honeywell LT-Cable, then you can simply plug the barrel connector in the DC IN Barrel Port. Following this process correctly will help ensure that you do not accidentally damage your 2GIG Edge.

Where the concern arises is that there are actually two (2) sets of terminal blocks on the 2GIG Edge Panel for connecting wires. And unfortunately, 2GIG didn't exactly make it super clear as to which set of labels goes with which terminal block. The best way to figure it out is in the fact that one set of terminal blocks is shorter than the other terminal block set. The set for providing power is the smaller terminal block with six (6) terminals, not the larger terminal block set with eight (8) terminals. You can see this in the image above.

The DC IN+ and DC IN- Terminals, along with the DC IN Barrel Port, are identified as the Power In Terminals. Those are the ports you want to use when providing power, whether you are using traditional alarm wire and you use DC IN+ and DC IN- (making sure to observe polarity) or you have a Honeywell LT-Cable and simply plug into the DC IN Barrel Port. If you do use DC IN+ and DC IN-, then make absolutely sure you are connecting to the terminal block with only six (6) terminals.

The potential problem arises in the other, larger terminal block with eight (8) terminals. This is known as the DCOUT+ Terminal Bock. And to make matters confusing the top two (2) wire terminals on this set have names that may make you think they are used for providing primary power to the system. But in reality, connecting primary system power here could seriously damage the system. These two (2) misleading wire terminals are labeled GND and AUX+, but these are output terminals.

Simply put, you do NOT want to use these terminals for providing system power. Again, the easiest way to avoid doing this is to make sure you are using the smaller terminal block with only six (6) wire terminals, NOT the larger terminal block with eight (8) wire terminals. Of course, if you use a Honeywell LT-Cable and the panel's DC IN Barrel Port, then this isn't really a potential hazard. There is only one barrel port and no way to mix it up.

The lesson of the day here is to be very careful when you are connecting power wires to the 2GIG Edge. Use the DC IN+ and DC IN- Terminals on the smaller block with six (6) terminals. The red positive (+) wire should go to DC IN+, and the black negative (-) wire should go to DC IN-. Or use a Honeywell LT-Cable and the DC IN Barrel Port. Do NOT use the GND and AUX+ Terminals on the larger block with eight (8) terminals. Making that mistake could potentially damage your 2GIG Edge System. Always be safe and smart, and make the correct wiring connections!

If you have any thoughts on the 2GIG Edge, or if you have any personal experience in wiring the system for power, then please feel free to share what you would like in a comment down below. We would love to hear from you! And remember to stay tuned to the Alarm Grid Blog for more tips and security news coming soon.

Alarm Grid is here with another video recap! This recap marks the return of Jorge to our videos after a long absence. Each video in this week's edition covers the 2GIG Edge, and we feel like we have some really helpful content to share with you. Anyway, let's get started with the video recap!

2GIG Edge: Activating on Alarm com

Jorge shows you how to activate the 2GIG Edge System with the Alarm.com service. Getting the 2GIG Edge set up with Alarm.com is an important part of getting the system monitored. All system alarms and other notifications are sent to the Alarm.com servers before being passed on to a central station and/or the end-user via text and/or email, depending upon the user's alarm monitoring plan. The 2GIG Edge comes ready to activate with Alarm.com using its built-in LTE cellular communicator. You can also set up optional IP connectivity using the panel's integrated WIFI card. Adding WIFI allows the use of the 2GIG Edge Remote Keypad as well as the Live Streaming feature for Alarm.com cameras.

2GIG Edge: Deleting a Zone

Jorge teaches you how to delete a zone on the 2GIG Edge. Zones are never really deleted from the 2GIG Edge. The system always has 100 wireless zones. But whether all of them are currently active or not is another story. When someone talks about "deleting" a zone, they mean clearing out the zone settings so that the zone can be used with a new sensor instead. This is normally done if you run out of zones and need to free one up, or if you simply want to stop using a sensor with the 2GIG Edge, or need to replace a sensor on the system.

2GIG Edge: Deleting Door/Window Sensors

I show you how to delete a door/window sensor from a 2GIG Edge. The process for deleting a door/window sensor from the Edge is the same as any other sensor type. You need to enter into zone programming, select the zone associated with the sensor you want to clear from the system, and then tell the Edge to reset that zone. The zone would then need to be reprogrammed from scratch in order to support the same sensor, or a new sensor programmed in its place. This could be another compatible door/window sensor, or any other type of compatible sensor.

2GIG Edge: Changing the Master Code

I show you how to change the Master Code on your 2GIG Edge Security System. The Master Code is the system's primary code for disarming, and also arming if Quick Arm is disabled. Changing this code is very important for security purposes, and it is one of the very first things you will do after getting the 2GIG Edge System. The 2GIG Edge default Master Code is 1111, and you will certainly want to change it to prevent a savvy intruder from trying that code to disarm your system.

2GIG Edge: Programming a Zone

Jorge shows you how to program a zone on your 2GIG Edge. Programming zones is an important task for setting up the system. This is the act of assigning sensors to empty system zone slots. You must configure the zone settings so that the system responds as intended when the sensor is faulted or activated. You will also set various settings for the zone, like its chime sound, whether or not RF supervision will be used, whether the system will report if the zone causes an alarm, and even the zone name.

2GIG Edge: Bypassing Zones

I teach you how to bypass zones on the 2GIG Edge. Bypassing zones is the act of telling the system to temporarily ignore specified zones so that they do not cause any system response when activated. Later, when you are ready to use the bypassed sensors again, you can then un-bypass them so that they are again used with the system like normal. This is a good alternative, and honestly much quicker and easier than having to delete zones entirely and then reprogram the zones from scratch.

Being in the alarm industry, we get to test out some of the newest security systems first-hand. Today, we will briefly discuss three juggernauts in the DIY security realm - the 2GIG Edge, the Qolsys IQ Panel 2 Plus, and the Honeywell Home PROA7PLUS, and explain why they can all succeed.

Whenever you have multiple companies all putting their best offerings forward to compete in the same field, there is usually the expectation that there will be at least one winner, but also at least one loser. However, in this playing field of three wireless alarm panels, it really appears as though each company has put its best offering forward and presented something distinctly unique that can stand out and succeed in this competitive industry. Simply put, all three of these systems are winners. It was rough getting here at times. There were some mistakes and growing pains along the way. Some were really bad. We can definitely say that it took some perseverance, but we reached a point where our three most prominent security system manufacturers - 2GIG, Qolsys, and Honeywell Home - have all hit their strides. It really is a fantastic sight to behold.

Today, we're not doing an in-depth compare and contrast of these three great systems, nor are we going to provide a definitive "ranking" of these systems. Maybe that can happen another time. What we are going to give you today is just a look at one (1) feature or capability for each system that is not possible for the other two. That is a major reason why we believe all three of these systems will thrive - they each offer something that you aren't going to find or be able to achieve with their biggest competitors. In other words, each system we're discussing today has an important competitive advantage that should keep it relevant for quite some time. Also, note that we're focusing on the positive aspects today. This isn't a wish list, and we're also not going to pick apart these systems to point out any minor flaws or shortcomings. This is just a chance for us to talk about something we like about each system and why we think it's a benefit. Anyway, let's get started. Here is why the 2GIG Edge, the Qolsys IQ Panel 2 Plus, and the Honeywell Home PROA7PLUS can all win.

2GIG Edge - Facial Recognition Arming/Disarming

Our impression of the 2GIG Edge is that Nortek really wanted to bring the alarm industry to the future. The system is loaded with advanced features and functions that certainly work to turn heads and bring the wow factor. None of those features more so than the panel's facial recognition arming and disarming capability. Sure, the IQ Panel 2 Plus also has its own facial recognition capabilities, but their system just generates an email from Alarm.com letting you know that the panel didn't recognize the face the last time someone disarmed. Only with the 2GIG Edge can you have the front panel camera scan your face and automatically arm or disarm the system, all without needing to enter a code. Facial recognition arming comes in handy if the Quick Arm feature (Q113) is disabled in order to provide arming/disarming logs. By default, this feature is enabled, which means that the system can be armed simply by pressing the Arm Stay or Arm Away button. This is convenient, but in some circumstances, such as for a business, you may want to know which user is arming and disarming your system, as well as when the system is being armed and disarmed.

The facial recognition feature of the 2GIG Edge differs from the Qolsys IQ Panel 2 Plus in another way. With the Qolsys panel, all of the heavy lifting is done by Alarm.com. The facial profile and recognition processing all occur on the Alarm.com servers. With the 2GIG Edge, the user's facial profile is stored locally on the panel, and facial recognition processing also takes place locally. This means your facial biometric information stays safe within your own network and is never sent out into the cloud. If you're concerned about keeping your facial biometric information private, then this is very important!

On top of that, the feature works shockingly well and consistently when set up properly, and unless you have an identical twin or a doppelganger hanging around, it's not a security risk in any way. This is the kind of feature that you brag about to your friends, as it's actually cool. Plus, once you get used to it and learn how to position your face just right, the feature is super convenient as well. Being able to arm or disarm your system while your hands are full is something you will absolutely appreciate at some point or another. Manufacturers are always looking for ways to futurize their alarm systems. Well, the 2GIg Edge has done exactly that with its facial recognition feature. We recommend checking our prior blog post dedicated to 2GIG Edge Facial Recognition to learn more.

Qolsys IQ Panel 2 Plus - PowerG Sensor Range

As the Qolsys IQ Panel 2 Plus is the oldest security system on this list, features that were once exclusive and unique have since been replicated by their competition. That being said, one area where the IQ2+ still reigns supreme is in the wireless range of its PowerG Sensors. With a range of approximately 2,000 feet when used with the IQ2+, you just can't go wrong. Sure, that listed range is assuming a best-case scenario in an open-air environment, with no large metal objects or other obstacles around to cause interference. Still, it blows the other manufacturers out of the water. While we haven't done any of our own testing (that may be a fun experiment for a future blog), the reports we hear from customers seem to indicate that PowerG Sensors on the IQ2+ do indeed offer a noticeably longer transmitting range than what can be achieved with the other panels on this list. We have heard multiple stories of users who have managed to get PowerG Sensors to work in areas such as warehouses and storage facilities where wireless sensors were thought to be completely unviable. If that wasn't enough, there is also the DSC PG9920 PowerG Repeater, which boosts the theoretical maximum wireless range to a distance of up to 4,000 feet!

While all of this doesn't really matter much for most users, as most users don't really need a sensor to work from 2,000+ feet away, the users who do benefit from the extended wireless range find it to be a complete game-changer. Just imagine, an installation that was once only possible with a super complex hardwired polling loop panel can now be achieved wirelessly with the IQ Panel 2 Plus! Not to mention that the PowerG Sensors offer some of the very best protection we have seen, with 128-bit AES encryption and Frequency Hopping Spread Spectrum (FHSS) Technology. We're a bit surprised other manufacturers haven't followed suit and offered something comparable to PowerG. It's not to say that their alternative sensor offerings (e.g. Resideo PROSIX and SiX Series Sensors, 2GIG eSeries Sensors) aren't good devices in their own right, but the DSC PowerG Sensors are still at the top of the food chain... at least for now. As a result, there are still occasional installations where our only option is to recommend the IQ Panel 2 Plus with PowerG Sensors. It's totally cool though, as the IQ2+ remains a great panel that is loaded with tremendous features.

Honeywell Home PROA7PLUS - IP-Only Monitoring Option

We have an honorable mention with the PROA7PLUS. Namely, it's the only one of these three systems with replaceable components, meaning that you won't need to replace the entire panel if something like its WIFI & Z-Wave card or its added cellular communicator becomes damaged. While replaceable components are nice to have, they don't necessarily sell panels like the ability to monitor across internet protocol (IP) only. Although we love getting customers on our Gold Plan, and we can talk about the benefits of cellular monitoring until we're blue in the face, the fact remains that there are some customers who just want reliable monitoring service at a low price. We see it all the time - a customer just wants no-frills monitoring service to get a homeowner's insurance discount and to provide a basic layer of protection over their household. To them, the extra cost associated with cellular or dual-path monitoring isn't worth the benefit of their system staying monitored during internet outages. All we can do is try to give these customers what they want - an alarm panel that will allow them to keep their monitoring costs down. That is what they get with the PROA7PLUS, as it is the only one of these three systems that supports IP-only monitoring.

Technically, it's not the doing of the panel that makes IP-only monitoring possible, but rather it's the monitoring platform. The other panels on this list connect with Alarm.com, which mandates that cellular connectivity is set up on all their accounts. The PROA7PLUS on the other hand doesn't use Alarm.com, but rather it uses AlarmNet and Total Connect 2.0. For the most part, Alarm.com and Total Connect 2.0 are relatively equal, but in a rare area of difference, TC2 allows for IP-only service, while ADC requires a cellular connection. The result is that when a customer comes to us wanting low-cost monitoring, after we explain the benefits of cellular, and they still want IP-only anyway, we go ahead with recommending the PROA7PLUS. That's not a bad thing either, as the system is super sleek, and it offers an incredible mix of great features and reliable performance. Though when it comes to the area where the PROA7PLUS stands out the most, it's the system's ability to be set up for IP-only alarm monitoring service. Unless Alarm.com drops its cellular requirement, or 2GIG and/or Qolsys team-up with another monitoring platform, Resideo and the PROA7PLUS will continue to dominate this market segment. There will always be people wanting monitoring service at the lowest possible price, even if it means giving up cellular connectivity. Luckily for those frugal folks, they have an excellent panel that gives them that option in the PROA7PLUS. That alone gives the PROA7PLUS plenty of opportunity to succeed. Also, just to be clear, a user can always add a cellular communicator to a PROA7PLUS and upgrade to cellular monitoring later on. We have many customers who want to start out on a low-cost plan and then upgrade to a more expensive plan later. That's perfectly understandable, and the PROA7PLUS makes that option possible.

What Do You Think?

We mean it when we say that the Edge, IQ Panel 2 Plus, and PROA7PLUS are all fantastic alarm panels. We might do a ranking someday, but to us, they are all winners. The choice really comes down to your unique needs. If the convenience of arming or disarming using your face is most important, go with the Edge. If you need the extended wireless range of PowerG, go with the IQ Panel 2 Plus. If you want low-cost IP-only monitoring, go with the PROA7PLUS. Each panel has its own advantage. There are also many other talking points that we simply don't have time to get to today. However, you can start your own discussion in the comments below! We would love to hear your thoughts, opinions, viewpoints, and personal experiences. If you have used or tested out any of these panels, then we would love to know about it. Also, our comments section is a great place to ask questions. Maybe we have something that we didn't cover that you would like to learn more about? Our team of experts are happy to help you. Leave a comment below, and we will be sure to reply. Plus, don't forget to stay tuned to our blog for more security news and discussions coming soon!

We have a relatively short post today, as we just wanted to say "Thank You" to 2GIG for featuring Alarm Grid on the 2GIG Instagram Page, @2gigsecurity. 2GIG posted our unboxing video of the new 2GIG Edge Security System. Thank you 2GIG, we're glad that you liked our unboxing video!

The 2GIG Edge is a wireless all-in-one alarm panel with a 7-inch touchscreen controller, built-in WIFI and LTE cellular, an integrated Z-Wave Plus V2 700-Series controller, support for up to 100 wireless zones, facial recognition disarming, Smart Area Partitions, optional Bluetooth disarming, full connectivity with the Alarm.com platform, and so much more! The system is available now on the Alarm Grid website in standalone AT&T and Verizon variants, or in one of our complete security system starter kits that include everything you need for alarm monitoring!

The unboxing video that 2GIG reposted is one of our very first in a new series by Alarm Grid, where "James the Video Guy" unboxes various alarm control panels and security system kits to show you exactly what's inside and what comes included. While James is usually known for his work behind the camera, this new series has given him a chance to step into the spotlight and showcase some of the most popular products offered by Alarm Grid. You can see the full 2GIG Edge Unboxing Video down below. We also made a blog post about our new unboxing videos back in April, which you can view here.

Thanks again to 2GIG for featuring us on their Instagram page. If you have any requests for what you would like to see in a future unboxing video from Alarm Grid, please let us know. You can leave a comment down below to make your request. We hope to have more videos like this available in the future. We will be sure to let you know as they come out. You can also leave a comment below to share your thoughts on our unboxing videos or any other videos featured on the Alarm Grid YouTube Channel. Thanks for reading, and we'll be back with more great security system content coming soon!

Welcome to a special Tuesday edition of an Alarm Grid Video Recap! We normally do these on Mondays, but we pushed this one back a day due to the time-sensitive nature of yesterday's post. Make sure to go and check that one out if you use the Nest Thermostat integration for Alarm.com.

As for today's video recap, it's mostly just business as usual. We have three (3) new videos today, all of which feature the 2GIG Edge. This innovative and feature-rich security system has certainly kept us busy and given us a lot to explore and share with you. We have even received some comments from users on YouTube asking us to cover specific 2GIG Edge features and functions. If you have anything that you would like to see from Alarm Grid, then make sure to leave a comment on this post down below. There's a great chance that you will see it in a future Alarm Grid video!

We know that you're on the EDGE of your seat waiting to see these new 2GIG EDGE videos, so let's get started! Here are the latest tutorial videos from Alarm Grid:

2GIG Edge: Clearing a Tamper Error

I show you how to clear a tamper error trouble condition from the 2GIG Edge. A tamper error occurs when the panel's internal tamper switch is not held down probably. This is usually the result of the panel being opened. When the issue occurs, a trouble notification will appear as a yellow circle with number inside it. Also, the panel will begin emitting a soft beeping sound. Once you properly close the panel so that the tamper switch is pressed down, the trouble notification will go away, and the beeping will cease.

2GIG Edge: Adding a Z Wave Device

I show you how to pair a Z-Wave device with a 2GIG Edge. Inside every 2GIG Edge is a Z-Wave Plus V2 700-Series Controller. This allows users to enroll a wide selection of Z-Wave peripherals, such as smart lights, door locks, programmable thermostats, and more. Z-Wave devices can be controlled locally at the panel, plus remotely from Alarm.com if the system is monitored with a plan that includes automation services. You can also create customized Alarm.com Smart Scenes to have your Z-Wave activate automatically.

2GIG Edge: Removing a Z Wave Device

I show you how to clear a device from the Z-Wave network using the 2GIG Edge. When you remove, or clear, a Z-Wave device, you are wiping out all its Z-Wave network data. This will allow the device to pair with a new Z-wave controller or hub. A user will typically remove a Z-Wave device if they no longer intend on using it. However, a user should also perform the clearing process before attempting to pair a device. This will ensure that no residual Z-Wave network data remains lingering inside the device.

A new alarm panel hitting the market often means an old one is discontinued. That is the case here today, as the 2GIG GC3e has been formally discontinued by Nortek Control. The GC3e has been replaced by the 2GIG Edge, which is available in both an AT&T variant and a Verizon variant.

As we look back on the 2GIG GC3e, we gotta admit that the panel was in an unfavorable position from the start. The system was a direct replacement to the 2GIG GC3, as it retained largely the same user interface, and its design only received a minor refresh. The big new addition with the GC3e was its ability to support 2GIG eSeries Encrypted Sensors. Along with the 2GIG GC2e, this marked the first time that 2GIG Alarm Panels could support encrypted sensors.

Unfortunately, 2GIG was late to the party, as other security systems like the Honeywell Lyric and Qolsys IQ Panel 2 Plus already had encrypted sensor support, not to mention a wide selection of sensors to choose from. Coupled with the fact that Qolsys continued to release new features for the IQ2+, and Resideo (formerly Honeywell) had the PROA7PLUS on the way, it quickly became clear that 2GIG would need to do better in order to keep up.

Thus began development on the 2GIG Edge. We first learned about the system in October of last year. With a bold new website and heavy promotion, hype around the Edge grew quickly. But this also brought questions in the back of our minds - what would happen to the GC2e and the GC3e? These panels had been on the market for less than two (2) years. Would 2GIG really abandon them so quickly? Well, today we have the verdict. The 2GIG GC2e stays, and the 2GIG GC3e heads off to the old alarm system graveyard in the sky.

First released in late July 2019, the 2GIG GC3e became known for its strong build quality and stark similarities to its GC3 predecessor. But it had a hard time competing with fellow Alarm.com Security System, the Qolsys IQ Panel 2 Plus. Buyers continued to flock to the IQ2+, which offered Automatic Bluetooth Disarming and Facial Recognition. Those features could not be easily added to the GC3e, so 2GIG decided to cut their losses and add those features into a new alarm panel, the 2GIG Edge. 2GIG even one-upped Qolsys by making it so that the Edge's Facial Recognition feature can be used for disarming the system!

With the Edge firmly in place as 2GIG's new flagship panel, and the 2GIG GC2e set as their "budget-friendly" option, some wondered if the 2GIG GC3e might be kept in production as a sort of "middle-of-the-road" offering. But nope, apparently, three panels is too many at 2GIG, and it's the GC3e biting the dust. And now, less than two years after hitting the market, and barely more than two years removed from its unveiling at ISC West 2019, we are saying goodbye to the 2GIG GC3e. It wasn't a long ride, but it was a good one.

If you have an existing 2GIG GC3e, then don't worry! The system will continue to be supported for alarm monitoring and service with the Alarm.com platform. Given the system's great build quality, it's fair to expect that existing GC3e Panels already out in the field will likely stay in service for quite some time, probably for the duration of LTE cellular networks. And speaking of LTE communication, Alarm Grid is continuing to offer LTE communicators for the 2GIG GC3 and 2GIG GC3e. These are the 2GIG LTEA-A-GC3 (AT&T LTE) and the 2GIG LTEV1-A-GC3 (Verizon LTE). If you need to get your GC3 updated, or your GC3e monitored, then either one of these modules is an excellent option. They're super easy to install, and they provide ultra-reliable cellular connectivity for the peace of mind that you deserve.

Meanwhile, the 2GIG GC2e will remain in production as the company's budget panel. However, we don't usually recommend that system for alarm monitoring, as it has no internet connectivity option to serve as an additional communication path, and it is relatively bare-bones in terms of features. But it is still an available option, and many users find that the GC2e is a strong offering as a replacement for the 2GIG GC2 or as a non-monitored system serving as a local noisemaker.

But for our top 2GIG pick, it should come as no surprise that we are recommending the new 2GIG Edge Alarm System. With its great features like 7-inch touchscreen controller, Facial Recognition, optional Automatic Bluetooth Disarming, Smart Area Partitioning support, 700-Series Z-Wave Plus V2 Smart Home Automation, and being dual-path ready right out of the box, we are proud to say that this system is available now on the Alarm Grid website. While we might miss the 2GIG GC3e, the 2GIG Edge certainly fills the void. Time will tell how the Edge fares against other competing systems like the Qolsys IQ Panel 2 Plus and Honeywell Home PROA7PLUS.

What do you think of the 2GIG GC3e? Will you miss the system? Are you surprised to see 2GIG discontinue the system after less than two years? Did you ever get to try the system out for yourself? Share your thoughts and experiences in a comment down below. We would love to hear what you have to say. And remember to stay tuned to the Alarm Grid Blog for more security system content coming soon. We promise, we don't discontinue systems every day, but when we do, we always make sure to say a proper goodbye. Farewell 2GIG GC3e!

We're back with another video recap! And this is a rather special video recap, because I have a guest joining me this time! It's someone you have never seen in Alarm Grid videos before, and we hope to have this person back and doing more videos soon. Five (5) new videos await! Let's go!

Alarm com Mobile App: Setting Up Multi System Access

I show you how you can set up multiple system access in Alarm.com. With this feature, you can access Alarm.com using a single username and password to control multiple security systems. There will be a dropdown menu in Alarm.com that you can use to navigate between the different systems linked with your account. This feature is excellent if you own multiple properties, or if you're a business owner with multiple locations. Now you can control all your systems from a single login!

2GIG Edge: Resetting the Master Code

In her triumphant Alarm Grid video debut, Aja shows you how to reset the Master Code on a 2GIG Edge Security System. The Master Code on a 2GIG Edge is used for arming and disarming and changing Master-level settings. The code should almost always be changed for security purposes. To change the Master Code, you can access the Users Menu and manually change the code. Additionally, if you perform a Factory Default of the Users Settings, then the Master Code will revert back to its default of 1111.

2GIG Edge: Resetting the Installer Code

I teach you how to reset the Installer Code on your 2GIG Edge Alarm System. The Installer Code on a 2GIG Edge is used for getting into deep-level programming. We recommend keeping the Installer Code at its default of 1561 so that you do not become locked out of programming. Keeping the Installer Code at the 1561 default does not represent a security risk because you cannot disarm the system with the Installer Code. If you ever forget the default code, you can always look it up later.

2GIG Edge: Factory Resetting

I show you how to factory reset your 2GIG Edge Alarm Panel. In order to perform a factory reset, also called a factory default, you need the system's Installer Code. This is because you must access the Installer Toolbox on the panel. Inside the Installer Toolbox is the Restore Defaults Menu. You can choose from multiple types of defaults to perform. The options include Sensors & Zones, Console, Users, Z-Wave Network, IP Cameras. You cannot "undo" a default after one has been performed.

2GIG Edge: Adding a User Code

I show you how to set up an additional user code on the 2GIG Edge Security Panel. The 2GIG Edge supports up to 100 different user codes. With this feature, you can give everyone who uses the system regularly their very own personalized user code. When you set up a code, you will be asked to provide the numeric code that will be used for disarming the system. If you have slots open for Automatic Bluetooth Disarming and Facial Recognition using personalized Facial Biometrics, then you can also set up those features when you create the new user.

We're back with more 2GIG Edge content today. First, if you haven't already seen our post about setting up 2GIG Edge Facial Recognition, then make sure to go check that out. We really want each new Edge user to get the most out of their system. But today's topic is Automatic Bluetooth Disarming.

Whether you prefer to call it Automatic Bluetooth Disarming, Bluetooth Low Energy, Bluetooth LE, or whatever, it's a pretty cool feature for the new 2GIG Edge Alarm System. It's actually pretty similar to what Qolsys offers on the Qolsys IQ Panel 2 Plus. I personally found the 2GIG Edge Bluetooth Disarming feature a little bit easier to set up, though I will admit that I also found the options associated with the feature to be a bit lacking. And by that I mean, there aren't really any options for the feature, other than turning it ON or OFF, or as 2GIG likes to call it, ACTIVE or INACTIVE.

You should also keep in mind that only a maximum of five (5) phones can be set up with the feature, and you can only have one (1) phone paired per user. If you want to have the maximum 5 phones set up for Automatic Bluetooth Disarming, then they will need to be set up with 5 different users. And we also want to mention that the feature can only be used when the system is Armed Away. It won't work when the system is Armed Stay. But all of that aside, we'll just have a fairly quick post today, I'm just going to give you a quick rundown of setting up the feature and putting it into action.

First, to get started setting up 2GIG Edge Automatic Bluetooth Disarming, you need to access the Users Menu. Start from the main screen of the 2GIG Edge Panel. Click the small Settings Icon (the gear) in the bottom-right corner. Then enter in the Master Code (default 1111, but usually changed) or the Installer Code (default 1561, not usually changed), or use Facial Recognition if you have the feature set up for the Master User. Once inside, choose Users to access the Users Menu.

In the Users Menu, find the user you want to set up Automatic Bluetooth Disarming for. You can do it for the Master User or any other valid user. You cannot set it up for the Installer Code, which makes sense because the Installer Code cannot disarm the system. And you cannot configure it for the Duress Code either, as that would certainly lead to countless false alarms, which we obviously don't want. But in any case, decide on a user that CAN be set up for Automatic Bluetooth Disarming, and click the pencil icon next to the name to access the edit screen for that user.

As you go down the list, you will see options for Display Name, Access Code, Facial Recognition, Bluetooth Disarming, and User Number. Obviously, the one we want is Bluetooth Disarming. And when you click that, you will be taken to the Bluetooth Disarming Edit Screen for the user you selected.

At this time, you should turn ON your phone's Bluetooth feature. You will very shortly be putting the panel into a scanning mode where it can find pairable Bluetooth devices. Remember that you can only pair certain Bluetooth devices, namely smartphones. You won't be able to pair something like a tablet or a laptop. Again, this makes sense based on how the feature is used.

When you are ready, click the blue PAIR button on the right-hand side. Then press the green Scan button on the following screen. The Edge will begin scanning for a pairable Bluetooth device. If everything was done correctly on the Edge, and your phone is in its Bluetooth pairing mode, then it should appear. In our example, the Bluetooth device is called VELVET.

You should also notice a Bluetooth pairing request on your smartphone.

Once you click the Pair button on your phone, you will get the notification on the panel. Press the green Pair Device button to complete the process.

And that's pretty much it! You can make the feature ACTIVE or INACTIVE within the settings menu for the assigned user. When active, the feature will always be in effect. However, there is one exception. If the panel detects that the phone is still present when the system officially becomes armed - in other words, immediately after the Exit Delay has expired - then that phone will be barred from activating the feature for the current arming session. This is designed intentionally to prevent the panel from being accidentally disarmed prematurely because of a forgotten or left-behind phone. If you realize you forgot your phone before you left, then don't expect that phone to be able to activate the feature and disarm the system. But, the feature can still be activated by a different phone, as long as that phone was properly programmed and it was outside of wireless Bluetooth range of the panel when the Exit Delay expired. One other note is that the phone must be disconnected from the 2GIG Edge for ten (10) full seconds to prevent being barred from activating the feature for that arming session.

As we mentioned earlier, a maximum of five (5) users on the 2GIG Edge can be set up with the Automatic Bluetooth Disarming feature, and each user can only have one (1) paired phone. The feature will only work in Arm Away mode. It will not work when the system is Armed Stay. Activating the feature is quite simple. Your phone should automatically connect with the Edge once it gets into Bluetooth range. But the system won't actually go and automatically disarm until you activate a delay period by faulting an Entry/Exit Zone, or in other words, opening a door used for coming and going, such as a front door, back door, or garage door. For the feature to work properly, the phone must "connect" with the panel before the Entry Delay is triggered. And with the phone already connected, the system should disarm immediately upon activating the Entry/Exit Zone.

There is a timer so that the feature won't activate right away. This is to prevent you from accidentally activating the feature while you are still nearby after already arming the system. This timer is five (5) minutes. In other words, 5 minutes after you arm your system, once the system detects the paired Bluetooth device, if the system is in its Entry Delay window, it will disarm. It's super convenient, and it's good to see that 2GIG accounted for the possibility of a forgotten phone so that it does not create a security risk. But it is a bit questionable that there's no way to change or adjust the 5-minute timer. Maybe 2GIG can make this an adjustable setting in a future update? We would sure appreciate that!

When actually using the feature, it is advised that you check and make sure that the Bluetooth on your phone is reconnected before faulting the Entry/Exit Zone and activating the Entry Delay Period. If it's not reconnected to Bluetooth, then the feature will not work, and the system will not disarm automatically. We also want to say that to prevent false alarms, you should always be prepared for the possibility that the feature may fail. Be prepared to disarm with a valid code if needed. It's true that you can also disarm with Facial Recognition if that is set up, but you should always be prepared for the worst. Out of the three - Bluetooth, Facial Recognition, and classic code entry - classic code entry is still the most dependable. But we can also say that when testing the Bluetooth Disarming feature at Alarm Grid, it worked flawlessly.

Have you gotten to try out 2GIG Bluetooth Disarming yet? What do you think of the feature? Leave your thoughts in a comment down below. And stay tuned for more security system content on the Alarm Grid blog coming soon!!

Hey Alarm Grid Blog Readers, just a quick update. We wanted to let you know that we (finally) got our 2GIG Edge set up in the video room, and we will have some new videos covering the panel coming out soon. If you have been waiting to see the Edge in action, the time is coming soon!

We have a small amount of content already available for the Edge. We got up FAQs covering the processes for resetting the Installer Code, resetting the Master Code, and factory resetting the system, and we're sure that we'll have some more FAQs uploaded real soon, along with videos to accompany them.

If you have any requests for the 2GIG Edge, leave them in a comment down below, and you might just see it become reality. Or if you don't let us know what you want to see, then we'll just go and decide for you! Either way, we are planning some great content coming soon. And if you haven't seen our blog about 2GIG Edge Facial Recognition, then go and check that out. Like I said, it's a real quick post today, but we figured it was okay to get the hype train rolling. Get ready for Edge videos and content coming soon!