Julia Ross Posts

It seems every week we're reporting a new feature being rolled out by Alarm.com. They recently added remote Duress Code programming through the Alarm.com app or website. Alarm.com must first enable this feature for the dealer, then users will have access if their panel supports the feature.

Before any Alarm.com user can start configuring codes remotely, the alarm dealer for the customer account must have this feature enabled. If the feature is not showing up when a user attempts to remotely program the Duress Code, contact the Alarm.com dealer and ask them to enable it. They may need to contact their Alarm.com Sales Representative to get the feature enabled.

Next, be sure that the alarm panel being used supports this feature. We have an FAQ on how to set up this feature via the Alarm.com Website and another FAQ on how to set up this feature using the Alarm.com App. Both of these FAQs have a list of compatible panels, and advise if a single or multiple codes are supported by the panel.

The way a Duress Code works is simple. If a system user is forced to interact with their alarm panel in any way, though this will usually involve disarming the system, if the Duress Code is used, then in addition to performing the security system function a silent signal is sent to the monitoring station alerting them to the fact that the system user is under duress. They are being forced to do something against their will. The monitoring station will receive this signal and then process it according to the customer's pre-stated wishes, and their own policies regarding duress situations.

The key element to the use of a Duress Code is the ability for someone who is not onsite to receive the signal and immediately take action. If the security system is not monitored by a trained 24/7 monitoring station employee then the Duress Code might just as well not exist. It may be possible to send a text, email, or push notification to someone outside the home or business, but there's a good chance that person may never see it, or may not understand what they're seeing. If there is any concern that a duress situation might occur, then central station monitoring is the best way to protect the people you love.

And finally, one thing I nearly forgot to mention above, an Alarm.com dealer cannot program a Duress User for a customer through their panel programming portal. Only the Admin Alarm.com Account user, the homeowner or business owner, is allowed to affect these codes remotely. So, what do you think about this new feature? Do you like the idea of being able to control system Duress Codes remotely? Leave a comment below and let us know your thoughts. We always enjoy hearing from our readers. That's all for now, stay safe out there.

Qolsys released the Qolsys IQ WIFI last week. The IQ WIFI supports dual-band (2.4GHZ and 5GHz) WIFI and can be used as a stand-alone router. It can also be installed in parallel with an existing network. This provides a separate secure WIFI connection for security devices such as cameras.

WIFI is about as common these days as home phones with a traditional copper line (POTS or Plain Old Telephone Service) were from the 1960's through the early 2000's. However, the adoption of WIFI networking has seen some challenges that were not really an issue when using POTS. Namely, the end-user installation and configuration aspect of WIFI networks, as well as issues with getting, and then staying, connected to them. The security industry has embraced WIFI in a big way in recent years, therefore security system users have felt the pain created by these challenges.

For this reason, Qolsys has introduced the Qolsys IQ WIFI. The IQ WIFI is a mesh-capable controller and agent system. Up to eight (8) devices can be supported per network. One IQ WIFI will connect to the modem, router, or switch via a wired ethernet cable. This IQ WIFI will become the controller for the mesh network. Then, up to seven (7) additional IQ WIFI units acting as Agents can be added for a total of eight (8) devices. This allows a user to blanket virtually every nook and cranny of the home or business with a safe and easily configured WIFI connection. If you have a Qolsys IQ Panel 2 or IQ Panel 2 Plus with firmware version 2.6.0 or later, the network can be configured right from the panel's touchscreen. The range between IQ WIFIs is approximately 130 ft. (39.62 m) with a coverage area of approximately 1,500 square feet (139 square meters). Wireless IEEE 802.11 b/g/n 2.4GHz and IEEE 802.11 a/n/ac 5GHz frequencies are supported.

The Qolsys IQ WIFI can be used as a stand-alone router. Each one contains a WAN port, a LAN port, and a barrel connector for power. Each one also has a WPS button. If your ISP provides you with a combination Modem/Router device, connect the WAN port of the IQ WIFI to one of the available ethernet ports on the Modem/Router. From there you can use the IQ WIFI as a wired or WIFI router. For wired devices, connect directly to the LAN port on the IQ WIFI. If you have more than one wired device to connect, connect a multi-port switch to the IQ WIFI LAN port, and then connect your other wired ethernet devices to the switch. As an alternative, connect the WAN port on the IQ WIFI to an existing router or switch, and then using this device as the Controller, build a parallel WIFI mesh network(s) out from there.

Up to seven (7) additional IQ WIFI devices can be added as Agents to create a mesh network that is as strong as you need it to be. This allows you to run a separate WIFI network inside your home or business that is virtually invisible to anyone attempting to hack in from the outside. Another attractive feature of this type of configuration is the ease of replacing the Internet facing hardware. Any time you need to swap out the main modem or router, all you do is swap out the existing hardware, then connect the Qolsys IQ WIFI acting as the Controller to the new piece of equipment. All of the WIFI devices that have been configured to connect through the IQ WIFI will keep their current configuration. There is no need to go around to each WIFI device and enter new credentials. This is particularly welcome when you have WIFI equipment, such as fixed-mount cameras, that may be installed in multiple and difficult to reach locations.

In many cases, security devices can only use the 2.4GHz WIFI band. When the SSID for both 2.4GHz and 5GHz are the same, this can cause issues for those devices that don't support both frequencies. We've seen this in many instances with the Honeywell Lyric. By allowing the user to separate the two bands, achieved by changing the SSID on one or both of them, you can make sure that any device that needs to use only one band or the other can find and then remain connected to the proper WIFI network. It may seem counter-intuitive to think that a Qolsys product could help to stabilize the WIFI connection for a Resideo or Honeywell alarm system, but it is absolutely possible.

When Qolsys first talked about this device, they called it the Qolsys IQ Router. Since then, they have updated the name to Qolsys IQ WIFI and they plan to release a separate device called the Qolsys IQ Router2, or possibly the IQ WIFI6 later in the year. This will be a more robust device supporting both WIFI and potentially another technology such as Z-Wave, Zigbee, or maybe even PowerG. We look forward to hearing about many more new products to come! What do you think of the Qolsys IQ WIFI? Leave a comment below. We'd love to hear from you.

The police department in Sandy Springs, GA is one of several that adhere to a policy of Verified Response when it comes to burglar alarms. They require proof that a crime has occurred before they will respond. Proof can come in one of several forms, which we will be discussing here.

Different police jurisdictions define verified response in different ways with different verification criteria. In some jurisdictions, a second burglar alarm activation on a different zone within the same address occurring within a certain period of time qualifies as verification. For others, there must be audio, video, or onsite verification before the police will respond. In Sandy Springs, GA, the latter type of verification is required. The full Alarm Dispatch Guidelines for Sandy Springs, GA can be found here.

This is not to say that the City of Sandy Springs or any other police department that otherwise requires verification won't respond to any type of alarm without proof of an issue at the site. For most jurisdictions, if there is a Panic, Duress, Hold-up, Medical, CO, Elevator or Fire alarm, the requirement for verification is waived and immediate dispatch can be requested. But, at least in the case of Sandy Springs, if authorities respond and there is no evidence of criminal activity or any other emergency, then false alarm fees will apply.

Furthermore, if a monitoring station employee requests public safety dispatch on an alarm based on audio or video proof that a crime is occurring or has occurred, then Sandy Springs requires that they submit proof of verification within 24 Hours of the dispatch request. Failure to do so will incur additional fines! Proof can either be described to the monitoring station employee by the end-user after checking their cameras or other means of verification, or it can come from the monitoring station employee themselves having reviewed audio or video evidence. The burden of proof has been placed squarely on the monitoring company.

If a customer has an alarm system that uses Audio Alarm Verification, sometimes referred to as 2-Way Voice, then the monitoring station can use this to verify if an unauthorized individual is onsite. In the case of Sandy Springs, silence does not count as proof of an issue, the monitoring station dispatcher must hear footsteps, talking, sounds of rummaging, or other proof of an issue at the site. If the customer has video surveillance, either the customer, or in some cases the monitoring station, can use the video system to verify if an alarm is an actual break-in. The customer may even have a friendly neighbor who is willing to receive a notification from the alarm monitoring company and will go and check things out for them and report back.

However, not every monitoring company will support 2-Way Voice. Currently at Alarm Grid, we don't support this option. And not every customer wants to blanket their property with security cameras. Some properties are too large, or too far away from neighbors to make relying on a neighbor a viable option. In these cases, the best option may be to employ a guard service.

In the past few years, Alarm Grid has partnered with a company called Vet Sec to provide an onsite guard response to monitored locations in jurisdictions such as Sandy Springs. Vet Sec employs guards, in most cases these guards are unarmed or they may be armed with non-lethal weapons (tasers). Once an alarm occurs, the monitoring station will contact Vet Sec, rather than the local police department. A single guard will respond and check the location for signs of a break-in or any other criminal activity, such as vandalism. If evidence of a crime is found, they will notify the monitoring station and wait up to 30 minutes for a key holder and the authorities to arrive. In exchange, they charge a fee for this site visit. The price may vary by location. In most cases, the police should respond within 30 minutes, but if it takes longer for them to arrive, and the customer or other key holder wants the guard to wait with them, then additional fees may apply.

There are several great things about this service. For one, just like with Alarm Grid monitoring, there is no contract so a customer can cancel at any time. Also, this is a "pay as you go" service, so a customer is only billed if a guard actually responds to their monitored location. The fees are billed to Alarm Grid and are then applied to the customer's monthly monitoring fee on the next automatic bill date. Alarm Grid does not markup this fee, we simply pass the fee along to the customer. What we pay, you pay.

Areas in the United States where Verified Response is Required:

Please keep in mind that this list is something that may evolve with little notice. It may be difficult to keep the list 100% accurate, but we will do our best. There have actually been a few places where the police department tried using verified response, and then changed their mind due to increases in property crime. San Jose, CA is one that comes to mind. It was reported in 2019 that they had decided to change their policy and move away from requiring verified response.

You may have noticed that the list above didn't feature any locations from our neighbor to the north. There are a couple of places in Canada that require a version of verified response. Winnipeg, Manitoba, and London and Toronto, Ontario have all adopted a more lax definition of this type of verification. In all three of these locations, the police department will accept two or more activations of two or more separate burglary zones as a form of verification. Currently, Alarm Grid does not offer a guard service in any of the Canadian provinces. If this changes, we'll be sure to update this blog post.

So, of course the burning question is, "How much does it cost?" For most locations the charge is $45 per site visit. There are a few locations where the price differs. In Sandy Springs, GA, the price is $68 per site visit. In Albuquerque, NM customers currently pay $57.07 per visit, and in Eugene, OR the price is $60 per site visit.

What do you think of the Verified Response Policy recently implemented in Sandy Springs, GA? Is it overdue, or overreach? Tell us what you think in the comments below. We'd love to hear from you. Stay tuned to our blog for more exciting security industry news. If you need help figuring out what system you have in the house you just moved into, or you're looking to upgrade an existing system, or to install one for the first time, reach out to us via email at support@alarmgrid.com. We're here Monday - Friday from 9 am to 8 pm Eastern. We look forward to hearing from you!

The year 2020 was about as tough as a well-done $2 steak. I hope never to have another one like it. On the other hand, 2021 is shaping up to end on a high note. One of the high points begins today. After skipping last year, Reed Exhibitions will hold ISC West live this year in Las Vegas.

In years past ISC West, the largest trade show associated with the safety and security industry, has been held in the spring. Due to COVID-19, the 2020 show was postponed in March, then postponed again in April, canceled in June, and ultimately held as a virtual-only event in October. We began 2021 with the show being postponed from the traditional spring dates, to July 19 - 21. There was also a comprehensive list of Health and Safety guidelines that those who will attend in-person are expected to follow. This year's show is being billed as a "hybrid" exhibit, with both in-person booths, and virtual events.

Finally, the time has come for the show to begin. Alarm Grid has opted to participate in the virtual-only portion of the show this year. We've reached out to our most popular vendors, and hope to be presenting exciting information on upcoming new products. So far, what to expect from the virtual show has remained pretty well hidden. Whatever we learn in the next few days about upcoming releases and new products, we will share here on our blog, and on our Youtube channel.

How about you, are you planning to attend ISC West this year? If you aren't going to the show, but wish you were, what burning questions would you ask? Personally, I'd like to get the inside scoop on chip shortages this year, and when we may be able to expect the shortages to ease. Qolsys, 2GIG, and Resideo (Honeywell) have all released new products in the recent past, do they have anything else new up their sleeves? We'll be looking for this information, and whatever we learn, we'll pass it along. Stay tuned!

Qolsys recently released a service bulletin describing an issue with certain IQ Hardwire 16-F units. This issue affects both the small enclosure and large enclosure versions. Under certain circumstances, affected units can signal a false tamper/tamper restore message for connected zones.

Qolsys TSB #210708, which was released on July 8, 2021, describes this issue, and the corrective action Qolsys is taking to remedy the problem. They do not provide a lot of information regarding what "conditions" bring about this behavior. We have asked for more detail, and if more information is forthcoming, we will provide updates here in our blog.

Rest assured that only a certain number of these devices are affected, and we will provide users with the necessary information to determine if they have one of these units. Qolsys IQ Hardwire 16-F units that were manufactured outside of the window in question are not affected and should not exhibit this behavior.

How to determine if your Qolsys IQ Hardwire 16-F small enclosure (SKU: QS7133-840) is affected:

On the unit itself, or on the box that the unit came in, check the Revision Sticker. This will appear as a bar code on the sticker and will be marked with SN: and DL: If the 4th character of the SN, moving from left to right, is a "C" then the Qolsys IQ Hardwire 16-F small enclosure should be returned/replaced. This sticker may be found on the rear of the unit and may require that you dismount the unit from the wall to get access it.

How to determine if your Qolsys IQ Hardwire 16-F large enclosure (SKU: QS7134-840) is affected:

On the Qolsys IQ Hardwire 16-F large enclosure, the way you determine the revision is the same, but the revision information is different. On these units the revision to be on the lookout for is "B" rather than "C". This sticker should also appear on the unit itself as well as on the box that the unit comes in. Since these devices come from the factory with an enclosure, the sticker may be on the enclosure rather than the printed circuit board. Unfortunately, it may also be on the back of the enclosure, requiring that it be removed from the wall to be accessed. When reading the sticker, the 4th character when viewing the SN from left to right is "B" on affected units. See the example below:

Qolsys has pulled back available affected stock to correct this issue. Units that may have been affected, but have since been pulled back into manufacturing and reworked or replaced, will sport a sticker that says "TEST OK".

If you purchase a Qolsys IQ Hardwire 16-F that falls within the Revision range discussed above, but the item has a "TEST OK" sticker affixed somewhere on the packaging or the unit itself, then you do not have to worry about this issue. If you purchased a Qolsys IQ Hardwire 16-F prior to the date that this notice was released, and your device falls within the revision range discussed above, then you should contact your distributor to discuss replacing the unit. Per Qolsys, you should do this even if you haven't observed the behavior described in this Technical Service Bulletin.

If you are an Alarm Grid customer, and you purchased an affected unit from Alarm Grid, you can contact us at support@alarmgrid.com. We are here Monday - Friday from 9am to 8pm ET. If you prefer to speak to us by phone, you can reach us at 888-818-7728. It is our pleasure to assist you with any and all of your alarm needs. Stay safe!

Qolsys has released the long-awaited Firmware Version 2.6.0. This will be the base version for the Qolsys IQ Hub and will allow users to configure the new IQ WIFI Mesh Router from the touchscreen of the IQ Panel 2. These are only a couple of the new features. This is truly an exciting update!

We've been talking about the Qolsys IQ Hub, well, forever, it seems. But honestly, it's been "coming soon" for over a year now. We are so glad that the wait is almost over. The Qolsys IQ Hub will truly be a DIY dream. Qolsys has taken a "see no green" approach to this panel, meaning there is no reason to open the panel fully, so you should never see the green printed circuit board (PCB). It won't even have screw terminals! The battery will be easily end-user replaceable with a minimum of "deconstruction" to the alarm panel itself. Some of the best features of the IQ Panel 2/2+ will be available in this new panel, such as Bluetooth disarming, and Alarm.com Camera Streaming at the panel.

A couple of things have been removed though. It will not have a built-in camera, nor will it offer 2-way voice capability. The IQ Hub is meant to be a slightly less expensive alternative to the IQ Panel 2 or 2 Plus, and to the Qolsys IQ Panel 4 that we should be seeing later this year. Initially, the IQ Hub will support PowerG Wireless Sensors, but later, there will be 319.5 MHz, 345 MHz, and 433 MHz options available. Each IQ Hub is intended to support only one (1) RF frequency.

You might be saying, "I thought this was a blog about Firmware Version 2.6.0?" Well, it is. But the fact that we have Firmware Version 2.6.0 available now means that the full release of the Qolsys IQ Hub won't be far behind. The Qolsys IQ Hub is scheduled for a Q2 2021 release. Aside from all the new features and improvements for the IQ Panel 2 Plus itself, another exciting capability that is added in this firmware release is the ability to control and configure the new Qolsys IQ Router through the IQ Panel 2 or 2 Plus Touchscreen.

The Qolsys IQ Router is also slated for release in Q2 of 2021. This is a mesh router system that will support up to eight (8) nodes, and both 2.4 GHz and 5 GHz networks. What's great about this product is that it allows a user to create a WIFI subnet inside their regular network. Any devices that use WIFI can be attached to the network, not just security devices, and multiple nodes (up to 8) can be added to strengthen the mesh network. If you change internet providers or even just internet equipment, you simply unplug the IQ Router from the existing router, plug it into the new router, and all of the WIFI devices will remain connected to the WIFI sub-network without having to reconfigure any of them. These are two upcoming products associated with the release of Firmware Version 2.6.0 that we're really looking forward to.

Below you'll find some of the additional new features supported on Firmware Version 2.6.0:

New Features:

• Support for DSC hardwire keypads (HS2LCD, HS2ICN) via the CORBUS on the PowerG Hardwire to Wireless Translator (PG9WLSHW8) with Firmware V 1.1. Also added new PGM system triggers for Police, Fire, Aux & CO emergency.
• Support for DSC NEO Wire-Free Keypads HS2LCDWFx, HS2LCDWFxENG.
• Support for new V4 PowerG Daughter Card.
• Panel now supports remote Z-Wave Smart Start integration from Alarm.com.
• This update includes the critical firmware2 fix that resolves an issue where certain panels would automatically reboot with previous firmware applied.

Fixes & Improvements

• Added a setting to allow the panel to send 1 or 10 images taken by PowerG Image Sensor Cameras (PG9934P, PG9944, NEXT CAM, PG2, NEXT CAM K9-85 PG2, BW-IRC, BW-IPC, TOWER CAM PG2, BW-ODC) during an alarm event to Alarm.com. Previously, ten (10) images were stored locally at the panel, but only the first image was sent to Alarm.com.
• Added a setting allowing alarm dealers to select a specific time for Communication Tests to be sent to the monitoring station. If no selection is made, the time will be randomized.
• Added a setting for detection direction on PG9902 Outdoor Curtain PIR. Users can choose left to right, right to left, or both.
• Added the ability to disable PowerG activation LED on devices that have one in order to conserve battery.
• Added Partition support for EN Grade 2 Panels.
• Improved 700-Series Z-Wave performance on UK & EU Panels.
• Bluetooth Disarm now available for UK & EU Panels.
• Added language support for Spanish (Spain), French (France), Finnish, and Polish.
• Added support for European date format: DD.MM.YYYY.
• Improved cellular strength matching between Panel and Alarm.com for Latin America.
• Silent and Audible Panics now report separate CID codes to central station.
• Duress Alarm and Silent Police Panic can now be dismissed from Alarm.com.
• Improvements to PowerG Wireless keypad functionality (WS9LCDWFx).
• Keyfob arming now follows the Auto-Bypass setting on the panel.
• Duress codes from KP-140 & KP-141 now transmit to Alarm.com.
• Corrected an issue where a PG9905 Temperature Sensor would send double alarms for the same event.
• Fixed an issue related to virtual device integration on the panel, which includes Liftmaster Garage Door control from the panel UI, and Solar Integration from Alarm.com. See TSB 201026 for additional details.

Into each life, a little rain must fall. It's not all good news, although, this is more of an inconvenience than actual bad news. Because Firmware Version 2.6.0 also contains the important firmware2 fix, it must be downloaded and installed from the Qolsys Server. The server has some logic built-in that allows it to tell if the panel being updated requires the firmware2 fix, or not. For this reason, much like Firmware version 2.5.5, Qolsys is not making this firmware file available for download. This means that Alarm Grid can't host it on our site.

What this means for the end-user is that in order to get 2.6.0, your panel must have a WIFI connection. Once it does, you have two ways in which you can get the firmware. You can request it from your alarm dealer, and they can push the update to your panel from Alarm.com. This will be a free update. As long as your panel has WIFI 24/7, this is a simple and no-fuss way to get your panel updated. Just remember, if for some reason your panel loses WIFI, the update won't go through. Alarm.com will not allow the panel to be updated via a cellular-only connection. You can also follow the instructions below to request the update via Patch Tag.

If your panel happens to be in an area where there is no WIFI, maybe it's a hunting or fishing cabin, or a second home where WIFI is not readily available, then you may be able to use your cell phone as a mobile hotspot and fool the panel into thinking it's connected to WIFI. The amount of data in this file is about 250 MB according to Qolsys. Alternatively, you may be able to move the panel to a spot that has WIFI available just long enough to perform the upgrade. In a situation like this, you need to be in control of when the update begins, so in this case, you would want to use the "Patch Tag" method of updating. To do so, once your panel has a WIFI connection, do the following:

Follow these instructions after making sure your panel is on version 2.0.1 or higher. If the panel is on 2.5.0 or 2.5.1, the user must first update to 2.5.3 before running the update for 2.6.0:

• Touch the small gray bar in the center at the top of the Home screen on the panel.
• Touch “Settings”
• Touch “Advanced Settings”
• Enter a valid Installer or Dealer Code (defaults are 1111 and 2222 respectively)
• Touch “Upgrade Software”.
• Touch “Patch Tag” and enter: iqpanel2.6.0 then touch “OK”.
• Important: If you need to install 2.5.3 prior to this update, the Patch Tag for that version is: iqpanel2.5.3. Run that update before running the Patch Tag for 2.6.0.
• Touch “Upgrade Using Network”. If the panel is connected to WIFI, the system will begin downloading the update, it will be installed when the download completes. Once the update begins Do Not Touch The Screen! The update will take about five (5) minutes, and the panel will reboot as a part of the process. When the panel returns to the home screen and the Green LED at the right lights, the process has completed.

What do you think about the new Qolsys firmware, and the new products they have in the pipeline? Share your thoughts in the comments below. Is there a security topic you'd like to see us discuss? If so, leave a comment and we'll be happy to cover any security-related topics of interest. As always, we look forward to hearing from you!

Here at Alarm Grid, we try to help as many people as possible with their alarm system. Sure, we hope it will lead folks to choose us for their alarm monitoring needs. But it's also because we're simply helpful people. An alarm in your home or business should help quell fears, not cause them.

We've begun what I think of as "Silly Season". You may be familiar with this term from Nascar, but for us in the alarm industry, this is the time when a lot of home buying and selling occurs. During this time, we get a lot of calls that go something like this, "I just moved into a home with an existing alarm. We haven't been using it, but somehow it got armed, and now it's going off, and I don't know the code to disarm it. Please help!"

Moving into a new home is exciting, but it's also stressful and can be overwhelming at times. So, I've (Ms. Manners) put together this guide to help you, the person who moved out of the home in this scenario, to leave behind your alarm system in a way that's as stress-free as possible for all parties involved.

Ms. Manners Says: Notify Your Alarm Company

If your alarm system is monitored, be sure to notify your alarm company that you are moving out and that the system is staying behind. This may seem obvious, but many people assume that if they stop paying their monitoring fees, the alarm company will know they no longer want service and will cancel it on their own. This is not the case for a number of reasons! There may be contracts involved. There could be liability issues. So for many reasons - not the least of which is it's the polite thing to do - any time you wish to stop monitoring service to a particular address, you should notify the alarm monitoring company as soon as possible.

By notifying the alarm company, you do several things. You give them an opportunity to reach out to the new homeowner and introduce themselves. Hopefully, if you've had a good experience with your monitoring company, you will also put in a good word about them to the new homeowner. Both of these things give the company a leg-up when it comes to courting a potential new customer, and it also gives the new homeowner information based on your real-life experience, not just an advertisement in a new homeowner's mailer.

By notifying the monitoring company, you can also help to prevent any unnecessary dispatching of the authorities to this address. As bad as the scenario above is for the poor, uninformed new homeowner, it's worse for the police, fire, or EMS personnel who may respond to the alarm, which we know is false.

Remember, the person who signed up for the monitoring service at the address in the scenario above no longer lives there. That means the monitoring station is going to be calling people who have no idea what may be going on at this address (which is also an annoyance for the person receiving the call). In this situation, it is likely that the monitoring station MUST dispatch because if they don't (and there is some type of emergency) there may be repercussions for them. A monitoring station is always going to adhere to the adage, "Better safe than sorry." After all, safety is their business.

Ms. Manners Says: Default Users, But Not Zones

When you sell a house and the alarm system with it, you may think it's a good idea to set the alarm system back to factory default to allow the new homeowner a chance to program it as they see fit. Resist this urge! In most cases, what was your Front Door is now going to be their Front Door. What was your Kitchen Window is now going to be their Kitchen Window. John's Bedroom Window may become Jane's Bedroom Window, but this is a pretty simple thing to change and doesn't really call for the entire system to be set back to factory default.

When it comes to user codes, though, it is best to set these back to factory defaults. This will prevent the new homeowner from finding out what codes you used. After all, we are creatures of habit, and there's a good chance you'll use those same codes in your next system. Also, if you set the codes for the Installer and Master users back to their default, the new homeowner should easily be able to find out what they are by doing a quick search online. Then, if they find themselves in the messy scenario discussed above, they'll be able to get themselves out of it. Being able to get yourself out of a jam like this one can do wonders for your self-confidence.

System Manufacturers and their Default Codes

Use the information in the table above to set the codes in your panel back to their default values. If you don't see your panel listed, you can likely find the information you need with a quick online search. Performing this process is the single most helpful thing you can do for the new homeowner when it comes to the alarm system!

Ms. Manners Says: Leave Behind Good Notes

Any information you know about your alarm system, such as the manufacturer and model, the default installer code, and the default master code - each of which hopefully you have programmed into your panel by this time - will be helpful for the new homeowner. A list of zone numbers and their descriptions is also very much appreciated by a new homeowner. Leave them a note, tucked behind the keypad, or on a kitchen counter. Give them the sequence of keys to enter to disarm the system, or better yet, if you have the opportunity, show it to them, and then leave them a note to back up your demonstration.

If you're willing, leave them your contact information so they can contact you in the event that something unforeseen comes up. This is particularly important if your system is somewhat complex and has multiple home automation features integrated with it. I promise the last thing the new homeowner wants to do is bother you if they can avoid it. Everyone at Alarm Grid has talked with a frantic new homeowner who never even considered contacting the prior homeowner. It's usually something we suggest if we're unable to assist.

Fortunately, in most cases, we are able to assist, and we are happy to do so. This is just one of the many ways we make new friends here at Alarm Grid! I hope that anyone who is preparing to move out of a home and leave behind an alarm system will read this and use these suggestions to prepare.

If you happen to be moving into a home that already has an alarm system, and perhaps the previous homeowner didn't read this post, feel free to reach out to us. We're here Monday - Friday from 9:00 am to 8:00 pm Eastern Time. You can reach us via email, or by calling 888-818-7728.

Total Connect 2.0 users may have recently noticed some Push Notifications showing that certain events originated from "[External] ApiGee". This is the result of an integration that Resideo is configuring. These alerts usually originate from a third-party integration.

Resideo, also known as Honeywell Home, is constantly working to improve the user's Total Connect 2.0 experience. They're working in the background to implement suggested improvements provided by both customers and alarm dealers. ApiGee appears to be one of those integrations. We don't have any details about what expanded features this may include, but the work they are doing in the backend has caused a few odd Push Notifications to be generated.

In most cases, we've seen these push notifications associated with using Alexa in conjunction with the Total Connect 2.0 skill. You probably noticed if you are using Alexa to access and control your system that when you enabled the TC2 Skill you had to provide your Total Connect 2.0 Login and Password. This creates what's called a server-to-server integration. Once the skill is enabled and proper login credentials have been entered, you'll see an option to enable the skill for the alarm panel and automation devices and then the skill is ready to go. If you have multiple locations being used with a single TC2 login you'll only be able to select one location to access using this particular Alexa account.

When you ask Alexa, for example, "Alexa, ask Total Connect 2 what the status of my alarm system is." The server at Amazon uses the credentials you provided at the time you set up the skill to actually log into Total Connect 2.0 and query the system status. This, of course, happens very quickly. Currently, this log-in appears to sometimes be viewed as a user logging in and is therefore triggering a push notification. This will only happen if you have Administration type notifications enabled. Administration notifications include Login, Logout, Login Instlr-Read Only, and so on. However, rather than Alexa's access being logged as the person whose credentials were used for the integration, it is instead being logged as [External] ApiGee.

At the time of this writing, March 3, 2021 at around 6:00 pm, it appears the issue with push notifications may have been resolved. We attempted to cause one of these notifications so that we could obtain a screenshot, but we were unable to do so. It appears that in the Activity screen if you select the icon to Show Admin Logs at the top, you will still be able to see these events being logged. The Admin Logs is the screenshot shown at the top of this post. It's probable that these events are meant to show up here, but were never meant to produce a push notification. Hopefully, this relatively minor issue has been resolved, and whatever this new feature may be, it will be available soon.

Qolsys recently released a Technical Service Bulletin outlining an issue with the IQ2 and IQ2+ panels and PowerG sensors. In some cases, panels that have just installed either firmware version, or panels running these versions that are rebooted, may lose touch with existing PowerG sensors.

The problem, according to Qolsys, is the encryption key. In some rare cases, either during the reboot after the firmware update, or upon rebooting once the firmware update has been applied, the panel's encryption key can be set back to default. Once this occurs, any PowerG devices in the field that have been programmed into the panel will no longer be able to communicate successfully with the panel.

When this situation occurs, a previously working PowerG device will show status on the panel, and on Alarm.com if monitored, of "Not Networked". It may also show an "!" next to the zone's status on the panel's Home Screen. If this condition is allowed to continue for the full supervisory window of the sensor (24-hours for non-life safety sensors, 4-hours for life safety sensors by default) then each affected sensor will go into supervisory failure at the panel and will show a status of Malfunction when viewed through Alarm.com.

If you see this issue on your Qolsys IQ Panel 2 or IQ Panel 2 plus system, you'll need to delete ALL PowerG sensors from the panel, and then re-learn them from scratch. By doing so, a new encryption key will be created and shared with each PowerG device. Once this has been done, all devices should begin working normally again. PowerG devices should be reprogrammed from the panel, not from Alarm.com. This way, full functionality can be verified once programming is complete. It would be best to be sure the panel does not reboot again until the next firmware update, which will resolve this issue. Only PowerG devices are affected by this anomaly, any legacy RF devices using the 319.5MHz, 345MHz, or 433MHz frequencies, and any Z-Wave devices should not be affected by this issue.

If you haven't updated to 2.5.3 or 2.5.4 yet, it is recommended that you update locally at the panel, rather than through Alarm.com. You can find information on updating via Patch Tag or MicroSD card on our Qolsys IQ Panel 2 Plus Firmware Update Page. Sadly, this won't necessarily prevent this issue from happening, but by being onsite at the time of the update, you'll be able to verify proper PowerG sensor functionality on each of your sensors as soon as the update has completed. According to Qolsys, firmware version 2.5.5 will be released in the near future, though an exact date has not been provided. This version will resolve the root cause of this encryption key issue. Any additional future updates will also include the necessary fix.

If you're interested in no-contract, low-cost monitoring, or if you're an Alarm Grid customer (present or future) with questions, you can reach us at support@alarmgrid.com. We're here to check emails M - F from 9:00 am to 8:00 pm Eastern Time. Thanks for reading, stay safe!

Alarm Grid is updating all of our monitored 2GIG GC2 panels. If the panel has a firmware version older than 1.19.3.1 and it needs a new communicator, then an over-the-air (OTA) update will be pushed to update it to 1.19.3.1 which will support any LTE comm. The update will cause a reboot.

Alarm Grid is committed to making sure none of our customers are left behind when the AT&T 3G and Verizon CDMA sunsets occur. Toward this goal, we have decided to proactively push a firmware update to each of our customer's 2GIG GC2 panels that are monitored through Alarm.com. The 2GIG GC2 can be a little tricky to update, and pushing the update OTA is by far the easiest way to accomplish this task.

If you are an Alarm Grid monitored customer who has a 2GIG GC2 panel on Firmware 1.19.3.1 or older with a pre-LTE communicator, you won't need to do anything special. The update will be pushed from the Alarm.com server and should occur automatically the next time your system is disarmed with no trouble conditions. As a part of the update, the panel will perform a reboot, and when it boots back up, it is likely to speak the current status. This is a normal part of the update process.

If you'd like to check the firmware version of your system then follow these steps. The purpose of this particular upgrade is to be sure any customer with a panel that doesn't currently support an LTE communicator will be able to do so. If your system already has an LTE communicator, even if the panel is not on the most recent Firmware, then no update will be sent. This is because you already have a Firmware version that supports the LTE communicator you're using.

Here's a breakdown of the 2GIG GC2 Firmware requirements:

As always, if you have any questions the best way to reach us is by emailing support@alarmgrid.com. Remember that our support hours are M - F from 9:00 am to 8:00 pm Eastern Time. We offer no-contract monitoring at reasonable prices and world-class technical support to our monitored customers. We look forward to hearing from you!