Alarm.com ADC-VC725 Posts

Posted By

Today, in this final part of our 2020 holiday buying guides, we will be checking out various accessories for the Honeywell Lyric, the Qolsys IQ Panel 2 Plus, and the 2GIG GC3e. Specifically, we will be looking at compatible cellular communicators, security cameras, keypads, and desk mounts.


Adding various accessories to your system can improve your overall experience and make your system easier to use. Most accessories are optional, though there some that are required for setting up new monitoring service. We'll be sure to discuss these factors along the way. The other very important thing to keep in mind is that compatibility is usually based on system. Check and make sure that any accessory you want works with your system.


Cellular Communicators

We'll start by looking at cellular communicators for our top alarm panels. All of our top security system picks have built-in WIFI for communicating right out of the box. But only the Qolsys IQ Panel 2 Plus comes with a built-in cellular communication module. For the Lyric and the GC3e, you must add a cellular radio if you want one of these systems to use a cellular communication pathway. Keep in mind that this is optional for Total Connect 2.0 Systems like the Lyric, as TC2 allows system to be set up with IP-only service. But for Alarm.com Systems, having an active cellular communication set up is required. This means that you must buy a cellular communicator for a 2GIG GC3e to get it monitored. Keep in mind that using cellular communication on any system will require a monitoring plan that includes cellular service, such as an Alarm Grid Gold or Platinum Level Plan.

A good thing about the cellular communicators listed here is that they are all LTE communicators. The term LTE stands for "long-term evolution", and the associated networks and cell towers are expected to be kept running and in-service for a very long time. This will remain true even as 5G networks are rolled out, as LTE is positioned to serve as a valuable and reliable backup option to 5G. At this time (December 2020), 5G communicators for alarm systems do not yet exist. This makes LTE far and away the best option for cellular communication on alarm systems at this time.

You will notice that there are no cellular communicators listed here for the IQ Panel 2 Plus. This is because the IQ Panel 2 Plus comes with a cellular communicator that is pre-installed. It cannot be removed or replaced. This means that the entire panel must be replaced in the event that its cellular radio fails. You will also see that carrier options for AT&T and Verizon are listed here. You should simply go with whichever carrier provides better service in the area where the system will be used. You can also check coverage maps if you are unsure. Remember, this choice will have no impact on your monthly monitoring costs, and it has nothing to do with the carrier for your personal phone. And just to restate it one last time, this is required for the GC3e, and optional for the Lyric.

Here are our top picks for cellular communicators.

Model Notes
2GIG LTEA-A-GC3
AT&T LTE Communicator for 2GIG GC3e. Requires system firmware version 3.2.3 or higher.
2GIG LTEV1-A-GC3
Verizon LTE Communicator for 2GIG GC3e. Requires system firmware 3.1.3 or higher.
Honeywell LYRICLTE-A
AT&T LTE Communicator for Honeywell Lyric. Requires system firmware version MR3 or higher.
Honeywell LYRICLTE-V
Verizon LTE Communicator for Honeywell Lyric. Requires system firmware version MR9 or higher.


Security Cameras

Next, we will be taking a look at various security camera options for your system. Broadly speaking, these devices can be split into two (2) categories. There are security cameras for Alarm.com and security cameras for Total Connect 2.0. If you are building around a Qolsys IQ Panel 2 Plus or 2GIG GC3e, then you will want to get Alarm.com Security Cameras. But if you are building around the Honeywell Lyric, then you should get Total Connect 2.0 cameras. Remember that using any camera will require a monitoring plan that includes video surveillance, such as an Alarm Grid Platinum Level Plan. The only exception is for a SkyBell Video Doorbell, which we will be discussing later.

The cameras listed here are all IP cameras, meaning that they connect to the internet for remote access. You can use the Alarm.com Mobile App or the Total Connect 2.0 Mobile App to get a live look-in for your camera from pretty much anywhere in the world. Most cameras connect across wireless WIFI, but some use wired ethernet connectivity. For those using wired ethernet, you will often see them listed as Power over Ethernet, or PoE. This means that the camera can get both power and network connectivity from the same connection. Cameras that use WIFI will typically just have a plug-in transformer for power.

Let's start by exploring the Alarm.com Cameras. These are what you want if you are building around an IQ Panel 2 Plus, a 2GIG GC3e, or any other Alarm.com Security System.

Model Notes
Alarm.com ADC-V522IR

Alarm.com Indoor 1080p camera. 113° Field of View. IR Night Vision range of 15 feet. Uses WIFI or ethernet connectivity, but does not support PoE.
Alarm.com ADC-V523
Alarm.com Indoor 1080p camera w/ High Dynamic Range. 117° Field of View. IR Night Vision Range of 15 feet. Uses WIFI or ethernet connectivity, but does not support PoE.
Alarm.com ADC-V622- WELL

Alarm.com Indoor Wellness Camera w/ 1080p recording. 180° Field of View. IR Night Vision Rang of 15 feet. Uses WIFI or ethernet connectivity. Supports PoE if ethernet is used. Doubles as Bluetooth speaker for two-way audio.
Alarm.com ADC-V723

Alarm.com Outdoor 1080p camera w/ High Dynamic Range. 117° Field of View. IR Night Vision Range of 40 feet. Uses WIFI connectivity. Does not support wired ethernet.
Alarm.com ADC-VC726
Alarm.com Commercial outdoor mini bullet 1080p camera. 86° Field of View. IR Night Vision Range of 95 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VC736
Alarm.com Commercial outdoor large bullet 1080p camera. 86° Field of View. IR Night Vision Range of 260 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VC826
Alarm.com Commercial outdoor dome 1080p camera. 108° Field of View. IR Night Vision Range of 95 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VC836
Alarm.com Commercial outdoor turret 1080p camera. 108° Field of View. IR Night Vision Range of 95 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VDB770
Alarm.com Video Doorbell 1080p Camera. 150° Vertical Field of View. 115° Horizontal Field of View. IR Night Vision Range of 15 feet. Uses WIFI connectivity. Does not support wired ethernet.
Alarm.com ADC-SVR122
Alarm.com Stream Video Recorder. Used to facilitate 24-hour continuous recording. Supports up to 2TB of storage w/ proper hard drives. Not an actual camera.
Alarm.com ADC-CSVR126
Alarm.com Commercial Stream Video Recorder. Used to facilitate 24-hour continuous recording. Supports up to 16TB of storage w/ proper hard drives. Not an actual camera.


Next, we will be looking at the Total Connect IP Cameras. There are only thee (3) models available, but they are the ones to use if you have a Honeywell Lyric set up with the Total Connect 2.0 platform.

Model
Notes
Honeywell IPCAM-WIC1

Total Connect 2.0 Indoor 720p Camera. 135° Field of View. IR Night Vision Range of 16.5 feet.
Honeywell IPCAM-WIC2
Total Connect 2.0 Indoor 1080p Camera. 110° Field of View. IR Night Vision Range of 33 Feet.
Honeywell IPCAM-WOC1
Total Connect 2.0 Outdoor 1080p Camera. 117° Field of View. IR Night Vision Range of 65 Feet. Does not record audio.

Lastly, we want to give special recognition to the SkyBell Doorbell Cameras. These camera replace your existing doorbell, and you can receive push notifications on your phone when someone rings your doorbell. They can also begin recording upon detecting movement, making them ideal for monitoring the front of your home. What's also unique about these cameras is they do not require true video monitoring service. Up to five (5) can be added on a TC2 account, while those with ADC can only use one (1), unless they upgrade to a true video monitoring plan. Make sure to use one designed for TC2 or ADC depending on the interactive platform you are using. Please note that only the TC2 version can be used with the native SkyBell App. You cannot use the SkyBell App with the ADC models.

Model
Notes
Honeywell SkyBell DBCAM-TRIM
SkyBell Slimline Video Doorbell Camera for use w/ Total Connect 2.0 and SkyBell App. Up to 1080p recording quality. Uses WIFI connectivity. Available in Satin Nickel or Oil Rubbed Bronze.
Alarm.com ADC-VDB101

SkyBell Round Video Doorbell Camera for use w/ Alarm.com. Up to 1080p recording quality. Uses WIFI connectivity. Available in Satin Nickel or Oil Rubbed Bronze.
Alarm.com ADC-VDB105
SkyBell Slimline Video Doorbell Camera for use w/ Alarm.com. Up to 720p recording quality. Uses WIFI connectivity. Available in Satin Nickel or Oil Rubbed Bronze.


Alarm Keypads


Our next topic concerns alarm keypads. These devices serve as a secondary on-site controller for your system. Some of these are very basic devices that are only useful for minimal system arming and disarming and showing status. Others offer complete touchscreen displays and allow you to perform a robust selection of security and automation commands. The important thing to pay attention to here is compatibility. Each keypad listed here will only work with the system that it is intended to be used with.

Some common locations for secondary alarm system keypads are near back doors or garage doors, as a user might want to arm and disarm from those locations as they are coming and going, without needing to go all the way to their primary alarm panel. They are also popular for use in master bedrooms, as having a keypad by your bedside can be a convenient way to call for help in the event that you hear someone breaking into your home.

Here are the available keypads for our top system picks.

Model
Notes
Honeywell LKP500
LCD Keypad for Honeywell Lyric. Used for basic arming and disarming. Provides two lines of character display, with 16 characters per line. 32 characters total. Supports chime. Honeywell LKP500-DK Desk Stand is also available.
2GIG PAD1-345
Push-button Keypad for 2GIG Systems, including the 2GIG GC3e. Used for basic arming and disarming. Can also be used to trigger a panic during an emergency. No display screen. No chime or voice.
2GIG SP1-GC3
Touchscreen Keypad for 2GIG GC3e. Supports full suite of security and arming functions. Pairs w/ GC3e across WIFI or using a local Access Point (AP). Offers chime and voice. Mimics screen of GC3e once paired.
Qolsys IQ Remote
Touchscreen Keypad for Qolsys IQ Panel 2 Plus. Supports full suite of security and automation functions. Pairs with IQ2+ across WIFI. Mimics screen of IQ2+ once paired.


Desk Mounts

Our final category is desk mounts for alarm panels. Using a desk mount allows you to position your panel upright on a sturdy desk or table, instead of wall-mounting or just laying it flat. These devices are often preferred by DIY users who don't want to drill holes in the wall. They are also great for renters who have restrictions on drilling holes.

Of our top security system picks, only the Qolsys IQ Panel 2 Plus comes with a desk mount included. However, the included desk mount is relatively small and flimsy. There is actually a more robust desk mount for the IQ Panel 2 Plus, which is included on this list. Using a proper desk mount makes it possible to perform a complete system installation with nothing more than a screwdriver in many cases.

Here are desk mounts for our top security system picks.

Model
Notes
Honeywell LCP500-DK
Desk mount for Honeywell Lyric. Allows for positioning at 30° or 60°.
2GIG CP-DESK
Desk mount for 2GIG GC3e. Also compatible with other 2GIG Wireless Alarm Panels.
Qolsys IQ Stand
Desk mount for Qolsys IQ Panel 2 Plus. Sturdier option than the standard table stand that comes included with the system.


Reach out to us!

This concludes our final buying guide for the 2020 holiday season. Make sure to check out our earlier buying guides on alarm panels, security sensors, environmental sensors, smart home automation, and our special guide for the Honeywell Home PROA7PLUS Panel. If you have any questions regarding compatibility, or if you are interested in starting new alarm monitoring service and you need help planning your system, please email our team at support@alarmgrid.com. We will help you every step of the way, from ordering the right equipment, to activating your alarm monitoring service. Our team is available to help from 9am to 8pm ET M-F. As always, we look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Owners of the ADC-VC725 and the ADC-VC825 will want to be on the lookout for a new firmware version. Alarm.com recently announced that these two discontinued cameras will be getting a new firmware update very soon. Users can easily push down the update from the Alarm.com website.


While a firmware update certainly sounds exciting, we must admit that there isn't anything too revolutionary from this new update. The new firmware version is called V5.3.0OP.200214, and it is exclusively for the Alarm.com ADC-VC725 and ADC-VC825 Commercial Security Cameras. The update provides minor stability fixes that should make the cameras more reliable.

The easiest way to perform the update is to do so using the Alarm.com customer website. Access Alarm.com, and login using your credentials. Then choose Video > Settings > Select Camera > Video Device Info > Firmware Version. You should be able to update the firmware from that screen. Alarm Grid monitored customers may also contact us to have us perform the update for you.

Please note that this firmware update is still brand-new, so it may not be available when you go to perform the update. If that is the case, try checking again later, or contact us for assistance. The firmware update was very recently announced, so don't be alarmed if it doesn't show up on ADC quite yet. And remember that this new update only applies to the ADC-VC725 and ADC-VC825.

Both the Alarm.com ADC-VC725 and the ADC-VC825 have been discontinued, and they can no longer be purchased from our website. But we have plenty of other Alarm.com Security Cameras if you are looking to build an effective video surveillance network. Some great options for commercial users include the ADC-VC726, the ADC-VC826, and the ADC-VC836.

If you need help performing the firmware update, or if you want to learn more about Alarm.com Security Cameras, please email us at support@alarmgrid.com. We check incoming emails from 9am to 8pm ET M-F. We look forward to hearing from you soon!

Tags: , , , , ,

Comments


Posted By

Alarm.com users now have a new feature at their disposal, as a special full-screen two-camera mode has been added to the Live Video page on the Alarm.com customer website. By accessing your Alarm.com account through the website, you can take advantage of this all-new viewing experience.


As you can see from the picture above, we have already tested this new feature to great success. We tested the dual-camera full-screen viewing option using the Alarm.com ADC-V723 Outdoor Camera (the top picture) and the Alarm.com ADC-V522IR Indoor Camera (the bottom picture). Both of these Alarm.com Security Cameras support the robust and powerful Alarm.com Video Analytics package. Although we don't believe that ADC Video Analytics is a requirement for using full-screen two-camera mode, we still highly recommend getting ADC Cameras with Video Analytics support because its tremendous benefits.

The new two-camera mode allows both displayed cameras to be live-streamed in HD quality, without any sacrifice or compromise in terms of picture. This is the perfect feature if you are wanting to monitor two cameras in your home or business at the same time. Additionally, Alarm.com has retained its other viewing modes, including 2x2, 1+3, full-screen, and theater modes. And of course, you can still set a single camera to its own exclusive full-screen if desired. But it's nice to see Alarm.com giving its users additional viewing options.

Remember, you need to have an alarm monitoring plan with access to Alarm.com video services to take advantage of this new feature. Alarm Grid customers can choose between a Platinum Level Monitoring Plan (Self or Full) or our Video-Only Plan. If you have any questions about this feature, or if you want to learn more about our monitoring plans, please reach out to us by emailing support@alarmgrid.com. Remember that our support hours run from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We have learned that Alarm.com has been pushing out automatic firmware updates for their security cameras. These updates are designed to make the cameras compatible with future enhancements that may be released at a later date. Alarm.com SVR Devices are also being updated.

Alarm dot com adc vc736 outdoor 1080p poe large bullet camera wiAccording to Alarm.com, any non-doorbell camera or SVR device that is online with a strong connection will have the update pushed down automatically. Alarm.com states that 95% of all compatible cameras and accessories have already received the updates. Cameras that are offline or set up with a weak connection will not be able to receive the automatic update. Alarm.com says that they are still trying to get all compatible devices set up with the update.

In the near future, users may notice problems for any camera that has not yet received the update. Specifically, these cameras may stop showing the device name and timestamp on their on-screen displays. Additionally, any SVR devices that have not received the update may stop supporting video recording and video playback. These issues will persist until the device receives the update.

Users may also find that their cameras and/or accessories are displaying a trouble condition for out-of-date firmware. This trouble condition is to let any end users know that they should update the firmware for their cameras and/or accessories as soon as possible. Fortunately, these issues can be properly addressed by simply updating these devices to their latest firmware versions.

If you notice this trouble condition you can manually push down an update yourself by accessing your Alarm.com account through the website and choosing Video > Settings > Select Device > Video Device Info > Update Firmware. You may also contact us to have us push down the update for you. Remember that your camera will need to be online with adequate signal strength in order to receive the update. There is no charge for us to push down this update to your ADC devices.

If you have any questions about the new Alarm.com Firmware Update, or if you need us to push down an update for you, please email us at support@alarmgrid.com. Remember that our support hours are from 9am to 8pm ET M-F. We look forward to hearing from you and making sure that your Alarm.com devices are properly updated!

Tags: , , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! We are happy to announce that the Alarm Grid logo will now appear in the lower-left corner of downloaded Alarm.com video clips. This new feature applies to any Alarm Grid customer who uses Alarm.com Cameras for video surveillance. You should notice the logo effective immediately.


The Alarm Grid logo should appear in the bottom-left corner of any downloaded video clip from Alarm.com. This includes any video clip that you choose to share through email, text message or social media. Sharing the clip effectively downloads it. This will count towards your monthly limit of allowed clip downloads. The logo will be semi-transparent so that it is clearly visible, but does not obscure the video in any fashion.

We believe that this new addition will add a nice touch to Alarm.com video clips. It will also help to identify the source of the clip in the event that you ever need to present video evidence to the authorities. Other than this image, you should not notice any changes to your Alarm.com video clips or your Alarm.com service in general.

Please note that this image will not be present in the live video feed for Alarm.com Cameras. The logo will also not appear in clips you view directly from Alarm.com. It will only be present in downloaded video clips.

Below is an example of what the image should look like in a video clip:


If you do not have Alarm.com video surveillance included in your monitoring plan, you can check our monitoring page for more information. You will need a Platinum Plan to use Alarm.com Cameras. We also offer a standalone video surveillance plan if you want to use Alarm.com Security Cameras without regular monitoring service.

Please email us at support@alarmgrid.com if you have any questions about this new feature or the Alarm.com service in general. You may also call us at (888) 818-7728. Our regular office hours are 9am to 8pm EST M-F. We look forward to hearing from you.

Tags: , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Hi DIYers! Recently, we paired an Alarm.com Security Camera with our Alarm.com account so that we could try viewing it through a Qolsys IQ Panel 2 Plus Alarm System. We gotta say, we're extremely pleased with the crystal clear recording capabilities, and we're sure that you will be too!

Qolsys iq panel 2 at and t wireless security system with at and Streaming video directly to the panel from Alarm.com is a feature available for both the standard Qolsys IQ Panel 2 and the Qolsys IQ Panel 2 Plus Systems. The system just needs to be running firmware version 2.2.1 or higher, and the user needs an alarm monitoring plan with video surveillance that is set up with Alarm.com. For Alarm Grid customers, these are our Platinum Level Plans.

Only select camera models are compatible with this feature. At the time of this writing, the following Alarm.com Security Cameras can be used with the IQ Panel 2 or IQ Panel 2 Plus for panel streaming:

Many of these cameras can support two-way audio as well. For our testing, we worked with the ADC-V522IR 1080P Indoor Security Camera. We were amazed with the quality of the video, both through Alarm.com and from the panel itself. The two-way audio functionality worked great as well.

If you don't believe it, just see for yourself. Here's a quick photo taken of our IQ Panel 2 System as it streams live video and audio. Yeah, our support room is a bit messy, but bear with us! The key point here is that the quality looks absolutely tremendous for an easy-to-use security camera. Just imagine putting one of these cameras in your home and streaming directly from Alarm.com and your IQ Panel 2 System!


We also took the opportunity to create some new FAQs to help users get started with this feature:

We have to give it to Qolsys for creating such a versatile alarm system with this outstanding feature. Now you can view your ADC Camera from Alarm.com when you're on the go, or from your alarm panel when you're at home!

You can get the Qolsys IQ Panel 2 or IQ Panel 2 Plus and many great Alarm.com Security Cameras from the Alarm Grid website. If you ever need any help deciding please reach out to us any time at support@alarmgrid.com. You can also call us during normal business hours, which are 9am to 8pm EST M-F. We look forward to hearing from you!

Update: When streaming cameras to the Qolsys IQ Panel 2 or Qolsys IQ Remote (keypad streaming introduced in FW Update 2.4.0), the stream will typically time out after three (3) minutes. At that point, the user may receive a "Video Device Not Responding" notification. They will need to refresh the screen to continue streaming. An Alarm.com Streaming Video Recorder (SVR) device can more reliably provide continuous local playback when connected with a stable network.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments