September 2020 Archives

As security professionals, we often encounter myths regarding security systems. There is a lot of untrue information out there, so we figured it would be a good idea to debunk a few security system myths to help end users understand the facts. Here are three false security system myths.

Myth #1 - Only Professionals Can Install a Security System

There was once a time when security systems were hardwired, and it was virtually impossible for a DIY user to install one. But with the rise of wireless alarm panels, many security systems can be installed using nothing more than a screwdriver. An end user can install their own system, program their own sensors, and get their system activated for monitoring service. Most wireless alarm panels even support desk mounts that allow a user to install a system without drilling holes in the walls. This can help a user save a lot of money by not having to hire a professional installer.

Myth #2 - Wireless Security Systems Are Not Secure

When wireless security systems first hit the market, many were easily defeated by third party devices. An intruder could block the signals from wireless sensors and prevent them from reaching the panel. They could also send false signals to the panel to make it appear as though a break-in was occurring, when really nothing was happening. But most modern wireless panels support encryption to prevent this from happening. This makes foul play all but impossible. There are many encrypted sensor options to choose from, including the Honeywell SiX Series Sensors for the Honeywell Lyric, the PowerG Sensors for the Qolsys IQ Panel 2 Plus, and the eSeries Sensors for the 2GIG GC3e.

Myth #3 - Security Systems Only Perform Security Functions

When shopping for a security system, many buyers only consider the security aspects. The reality is that a modern security system does so much more than just keep you and those around you safe. Nearly every security system on the market today also offers smart home automation capabilities. You can pair a variety of smart home devices with your system, including smart lights, door locks, programmable thermostats, and more. You can then control these devices from the panel and have them activate automatically with programmed smart scenes. And if your system is monitored, then you can control the devices from anywhere using a web browser or a mobile app on your phone.

Security systems today are more powerful and easier to use than ever before. Now is a great time to get started with a new security system for your home or business. Check out this post to learn more about the monitoring plans offered by Alarm Grid. If you're interested in getting started, then please email us at support@alarmgrid.com for more information. Our team checks email from 9am to 8pm ET M-F. We look forward to hearing from you!

While we love talking about our various security products, we also want to remind everyone about the security stickers and yard signs we offer. These goodies provide a great way to display our logo and let others know that you are monitored. You can buy them a-la-carte on our website.

The purpose of our yard signs and window stickers is quite simple. You put them around your property to let others know that you are monitored by Alarm Grid. This will discourage intruders from trying to get into your home. Even if your security system works perfectly during a home invasion, an intruder might still cause damage during the break-in process. Therefore, the best case scenario is to prevent the bad guys from even trying to begin with. Intruders are less likely to target homes with alarm systems, so putting up stickers and yard signs serve as an excellent deterrence tool.

Alarm Grid sells two (2) types of window stickers. Our indoor window stickers have an adhesive front, and you place them on the inside of a window, facing the outside. Anyone who looks at the window will see it peeking. We also sell outdoor window stickers with an adhesive backing. The outdoor stickers are super versatile, and many users get creative by placing them on refrigerators, mailboxes, laptops, and even cars! Stickers are available in regular and mini sizes. Mini window stickers are sold in packs of 1, 5, and 10.

While our stickers are ideal for posting around the home or office, a security yard sign is a bit more tangible. These yard signs come with a metal stake that you can push into the ground to keep them upright. A hammer can be useful for pushing the stake into the ground. You then secure the sign to the metal stake using the included hardware. And just like that, you will have a prominent sign outside your home or office deter any burglars from entering!

We give away signs and stickers to newly monitored customers as a free gift. Make sure to ask when you sign up for monitoring. And if you want some extra ones, they are available for purchase on our website. You can get single stickers for just 99 cents plus shipping, so they are super convenient to add to an existing order. If you have any questions about our stickers or yard signs, feel free to email us at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. Also remember to check out this page to learn more about our monitoring plans. We look forward to hearing from you!

We have another video recap lined up for you! This time there are three (3) new videos to check out. And this happens to be a very special video recap, because our fan-favorite technician makes his much-anticipated return! Let's take a look at the new Alarm Grid videos for September 11th.

Making All Partitions Sound on the Qolsys IQ Panel 2

The man. The legend. Jarrett is back, and he's going to talk about how you make all partitions sound on the Qolsys IQ Panel 2. When you enable partitions on the IQ Panel 2, only sensors on partition 1 will trigger sounds, by default. If you want the system to produce sounds for other sensors, then you must enable the Global Intrusion Sounds and Sirens feature for the system. This will require accessing programming with the Installer Code (default 1111).

Arm Stay and Arm Instant

Jarrett is excited to explain the difference between Arm Stay Mode and Arm Instant Mode. When you Arm Instant, the system ignores Entry Delay periods. This means that if you fault an Entry/Exit Zone while the system is Armed Instant, then the system will go into immediate alarm, instead of giving you a chance to disarm during the Entry Delay countdown. In Armed Stay, you get the Entry Delay when you fault an Entry/Exit Zone. Both Arm Stay and Arm Instant will automatically bypass interior zone types.

Program SiXSMOKE to Lyric Controller

I show you how to program a Honeywell SiXSMOKE to the Honeywell Lyric Alarm System. The Honeywell SiXSMOKE is an encrypted smoke and heat detector built exclusively for use with the Lyric. The smoke detector portion is photoelectric, which means that there is a small light inside the sensor. Smoke entering the chamber will cause the light to refract, which tells the sensor to report to the system. The heat detector uses both fixed temperature detection and rate-of-rise detection. The sensor has an 85 dB sounder.

A great way to build out your Honeywell Lyric is with Honeywell 5800 Sensors. These are simple, 345 MHz wireless sensors that you can easily enroll with the system for security, life-safety, and environmental monitoring. They are perfect for expanding your system and making it more robust.

When you want to pair a Honeywell 5800 Sensor with the Lyric, the process is very straightforward. Put the Lyric in its auto-enrollment mode by choosing Security > Tools > enter Installer Code (default 4112) > Program > Zones > Add New > Serial Number. Make sure the RF Type on the right-hand side is set to 5800. Then activate the sensor either by faulting it or triggering its cover tamper switch. The Lyric should beep to confirm that it received a signal transmission. Then activate the sensor a second time to have the Lyric display the Serial Number. The third activation will confirm the Serial Number and return you to the screen where you can configure the zone settings.

Programming the zone settings for the sensor is actually quite simple. Depending on how you enrolled the sensor, you may need to adjust the Loop Number. This is almost always the case if you enrolled the sensor by activating its tamper switch. Refer to the instruction manual for the 5800 Sensor to determine which Loop Number to use.

The two (2) Zone Descriptors and the Device Type serve as the name for the sensor. You should choose a name that will help you identify the sensor, e.g. "Front Bedroom Motion Sensor", "South Hallway Door", etc. The Response Type determines how the system responds when the sensor is faulted. See our list of Lyric Response Types for more info.

Alarm Report should be set to Yes if you want the system to report out through AlarmNet to a Central Station if the zone causes an alarm on the system. That is an essential component of alarm monitoring services. Chime is optional, and it has the panel emit any one of several available sounds when the zone is faulted. Supervision tells the panel to look for an RF check-in signal from the sensor periodically to ensure that it is online. Click Save in the bottom-right after you finish adjusting the settings.

Keep in mind that only uni-directional (one-way) sensors from the Honeywell 5800 Series can be used with the Lyric. This leaves out bi-directional devices like the Honeywell 5800WAVE Siren, the Honeywell 5828 Keypad, and the Honeywell 5800RL Relay Module, so make sure you do not buy those for the Lyric. But you still have a lot of excellent sensors and security devices to choose from.

Below is a list of the Honeywell 5800 Sensors that you can use with the Honeywell Lyric:

Sensor Name	Notes
Honeywell 5800MINI	Door/Window sensor. Uses Loop 1.
Honeywell 5800PIR-RES	PIR motion sensor. Uses Loop 1. Coverage Area: 35' x 40'
Honeywell 5816	Door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switch
Honeywell 5811	Door and window sensor. Uses Loop 1.
Honeywell 5800C2W	9-zone wired to wireless converter. Allows hardwired sensors to communicate with the Lyric as wireless devices. All zones use Loop 1 and a unique Serial Number ID.
Honeywell 5800CO	Carbon monoxide sensor. Loop 1 = CO Detection Loop 2 = End of Sensor Life (separate programming only required on TURBO and other V-Plex panels)
Honeywell 5800COMBO	Combination, smoke, heat, CO, and low-temperature sensor. Uses up to five (5) zones on the Lyric Panel. Has two (2) Serial Numbers for enrollment purposes. Loop 1, SN 1 = Smoke/Heat Detection Loop 2, SN 1 = Smoke/Heat Maintenance Loop 3, SN 1 = Low Temperature Detection Loop 1, SN 2 = CO Detection Loop 2, SN 2 = End of Sensor Life (separate programming required only on TURBO and other V-Plex panels)
Honeywell 5800FLOOD	Flood and temperature sensor. Loop 1 = Low Temperature Detection Loop 2 = High Temperature Detection Loop 3 = Flood Detection
Honeywell 5800MICRA	Recessed window sensor. Uses Loop 1.
Honeywell 5800PIR	PIR motion sensor. Loop 1 = Low Sensitivity Motion. Loop 2 = High Sensitivity Motion. Loop 3 = Low Temperature Detection Coverage Area: 35' x 40'
Honeywell 5800PIR-COM	Commercial PIR motion sensor. Loop 1 = Low Sensitivity Motion Loop 2 = High Sensitivity Motion Loop 3 = Low Temperature Detection Coverage Area: 60' x 80'
Honeywell 5800PIR-OD	Outdoor PIR motion sensor. Uses Loop 1.
Honeywell 5800PIR-OD2	Outdoor PIR motion sensor. Uses Loop 1.
Honeywell 5800RP	Wireless repeater for Honeywell 5800 Sensors. Does not require enrollment, but can be assigned a single zone for RF supervision, low-battery, AC loss, and RF jam detection. This is done using Serial Number 1 with Loop 1, with DIP Switch 2 set in the OFF position. Can also use up to four (4) separate zones for supervision when DIP Switch 2 is set to ON. This is required for UL installations.
Honeywell 5800RPS	Recessed door/window sensor. Uses Loop 1.
Honeywell 5800SS1	Shock sensor. Uses Loop 1.
Honeywell 5802MN	Medical alert button. Uses Loop 1.
Honeywell 5802MN2	Medical alert button. Uses Loop 1.
Honeywell 5802WXT	Panic button. Uses Loop 1.
Honeywell 5802WXT-2	Panic button. Uses Loop 1.
Honeywell 5806W3	Smoke detector. Uses Loop 1.
Honeywell 5808W3	Smoke and heat detector. Loop 1 = Smoke & Heat Detection Loop 3 = Low Temperature Detection
Honeywell 5809	Fixed temperature and rate-of-rise heat detector. Uses Loop 1. Alarm occurs when the temperature exceeds 135 degrees Fahrenheit, or when the temperature rises more than 15 degrees Fahrenheit per minute.
Honeywell 5809FXT	Fixed temperature heat detector. Uses Loop 1. Alarm occurs when the temperature exceeds 135 degrees Fahrenheit.
Honeywell 5809SS	Fixed temperature and rate-of-rise heat detector. Uses Loop 1. Alarm occurs at 135 degrees Fahrenheit or when the temperature rises more than 15 degrees Fahrenheit per minute.
Honeywell 5814	Door and window sensor. Uses Loop 1.
Honeywell 5815	Door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switch
Honeywell 5816MN	Door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switches
Honeywell 5816OD	Outdoor door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switch
Honeywell 5817	Three (3) zone door and window sensor & transmitter. Loop 1 = NC or NO (DIP Switch Selectable) unsupervised. It does not use an End of Line Resistor (EOLR) Loop 2, 3 = NC Only. Both are unsupervised with no EOLR used
Honeywell 5817CBXT	Three (3) zone commercial transmitter. Loop 1 = Two (2) Terminals; Primary Loop supervised by 470k Ohm (yellow, purple, yellow, gold) EOLR. Resistor must ALWAYS be installed, even if Loop 1 is not programmed. If Loop 1 is used as a burglary zone, then Loop 4 must be programmed as a separate zone for Cover Tamper protection. Loop 2 = NC Reed Switch Loop 3 = Two (2) Terminals; NC Loop unsupervised, no EOLR required
Honeywell 5817XT	Three (3) zone door and window sensor & transmitter. Loop 1 = NC or NO (DIP Switch Selectable) unsupervised with no EOLR required Loop 2, 3 = Two (2) Terminal Blocks, NC Only
Honeywell 5818MNL	Recessed door and window sensor. Uses Loop 1. Not suitable for use in metal doors
Honeywell 5819	Three (3) zone shock processor. Loop 1 = NC for Inertia Style External Shock Sensor. This input provides a suitable fast loop response of from 1ms to 20ms, based on dip switch setting Loop 2 = Reed Switch Loop 3 = NC for Wired Contact, unsupervised with no EOLR required
Honeywell 5819S	Shock sensor and contact sensor. Loop 1 = Built-in Inertia Style Shock Sensor Loop 2 = Reed Switch Loop 3 = NC for Wired Contact
Honeywell 5819WHS	Three (3) zone shock processor. Loop 1 = NC, Built-in Inertia Style Shock Sensor Loop 2 = Reed Switch Loop 3 = NC for Wired Contact
Honeywell 5820L	Slimline door and window sensor. Uses Loop 1.
Honeywell 5822T	Garage tilt sensor. Loop 1 = NC for Wired Contact, unsupervised, no EOLR used Loop 3 = Tilt Switch
Honeywell 5834-2	Two (2) button key fob. Dual-button inputs allowed. Uses three (3) loops total, for a possible three (3) inputs. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5834-4	Four (4) button key fob. Dual-button inputs allowed. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5834-4EN	Four (4) button key fob. Dual-button inputs allowed. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5853	Glass break sensor. Uses Loop 1.
Honeywell 5869	Commercial panic switch. Uses Loop 1. Latches when tripped, key (provided) needed to reset it after it is tripped
Honeywell 5878	Six (6) button key fob. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible.
Honeywell 5898	Dual-tec motion sensor. Loop 1 = Low Sensitivity Motion Sensor. Pet immunity is available for this loop. 50lb or 100lb pet immunity, selectable via DIP Switch 1 Loop 2 = High Sensitivity Motion Sensor. Loop 3 = Temperature Sensor (High or Low, DIP Switch Selectable)

9/11 is a day I will never forget. I was a younger man back then, but the images of the two towers smoldering and falling down are seared into my memory. "America is under attack." Those are the words that were uttered by the Principle of my small Catholic school in the great state of Minnesota during a hastily gathered together convocation. Minutes after the student body gathered the first tower toppled into a heap, and shortly thereafter, the second tower followed. America stopped. Our airline industry ground to a halt. For those not old enough to remember, envision a sky with no airplanes. Envision a country filled with people who's stomachs would turn when they would hear the very occasional military Jet scramble. America went silent after 9/11, and everything changed.

I remember the patriotism that engulfed America. Americans hung flags from their cars, put little flags on their lawns, and proudly united around all the things that make this country great. I remember the brave firemen and policemen that waded through the rubble searching for America's living and dead. Many of those first responders lost their lives from complications attributed to the soot and chemicals kicked up by the falling towers. Today, we honor those brave men and women.

In the ensuing years, our country has been stuck in the miry quagmire of wars all over the Middle East responding to those that perpetrated terror on us on that terrible day in the year 2001. Those men and women are heroes, and I am humbled by their commitment to serving the country.

Little did I know then that 20 years later, I would be leading a company that worked closely with the nation's first responders. Alarm Grid is a proud partner with those men and women. We are honored to make both the people we serve and those men and women who serve us more safe. We hope that we continue to do them proud as they serve our country day-to-day. We hope to work with them and you for many many years to come.

Bless you all, and bless America on this most sacrosanct day.

The Z-Wave Alliance has announced the specifications for the Z-Wave Long Range protocol. Users will be able to take advantage of a greatly extended wireless range and utilize many more nodes on their smart home networks. We're excited about what is coming to the world of home automation!

Z-Wave Long Range (aka, Z-Wave LR), will provide up to roughly four (4) times the range of existing Z-Wave Plus technology. This equates to roughly 200 feet between signal hops! The protocol will also allow for networks of more than 2,000 nodes, whereas the current limit is 232 nodes. Battery life is also being improved, as a typical Z-Wave LR device will be able to run for up to ten (10) years on a single coin battery. And like prior generations of Z-Wave, the Z-Wave LR devices will be backwards compatible with older controllers and hubs.

Executive director of the Z-Wave Alliance Mitchell Klein said of Z-Wave LR, "The Z-Wave LR specification is the first of many technical developments to come from within the new Alliance standards development organizational structure... As smart home networks continue to grow, mature, and add more complex devices, there is a need for more robust technology to support them. With Z-Wave LR, we are building upon Z-Wave’s legacy of strong networks by supporting more devices in a home or building with increased node counts and greater range. It’s more important than ever that IoT devices live on strong, reliable networks, and we’re excited to support this with the latest Z-Wave specification.”

We have heard talk of a Z-Wave 700-Series for quite some time, and it looks like it is now coming to fruition. Of course, we shouldn't expect to see Z-Wave LR technology popping up overnight, but it does appear that it is coming sooner rather than later. It will be interesting to see which security systems are the first to take advantage of this exciting new technology.

If you have any questions about Z-Wave, or if you are interested in monitoring service that includes home automation functionality, please email us at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Kentucky will soon become home to the latest Alarm Grid office, as we have been diligently assembling a team of expert alarm technicians in the area. Our new hires need a place to work, and a new satellite office will soon be on the way. This is a big step in enhancing our support team.

Alarm Grid certainly tackled the pandemic without missing a beat. It seems that with more downtime, many people finally got around to setting up their own security systems. And with the growing demand and increased business, we had to make some new hires.Since our latest team members are all located in the state of Kentucky, we decided it was time to open an office there. We are thrilled to say that our new satellite office is set to open in October.

Our team has been working with an outstanding group of dedicated and experienced alarm technicians in Kentucky over the past couple of months. We have been developing and molding their skill sets to fit the needs of our growing company. Our new team members have really hit the ground running, as they have already begun to assist us in our regular support duties. We are ecstatic to have these new hires as members of the Alarm Grid team.

Right now, our new Kentucky hires are working in a temporary office, as they are learning everything they need to know to take on a full range of support duties. The permanent office is scheduled to open in October, and we are sure our new team members will be thrilled to finally get comfortable and situated. This has been a huge undertaking for us, and we're very pleased to finally have some results to show from all our hard work.

Not much is changing with the Alarm Grid South Florida Headquarters. Our Florida offices will continue to remain as the home for our Sales/Planner Team, our Content Team, and our Executive Team. Support and Activations will be split between Florida and Kentucky. If you haven't called-in to Alarm Grid support recently, you may notice some friendly new voices on the line. Whether you get a technician in Florida or Kentucky, you can rest assured that you will be receiving the very best customer support and service every step of the way.

Alarm Grid sends a special thank you to our new hires for working hard to get up to speed. We also thank our existing staff for their great job in training the new team members. And most of all, we thank our monitored customers for their continued support. We are proud to have all our monitored customers as members of the Alarm Grid family. If you are interested in Alarm Grid monitoring, please email us at support@alarmgrid.com. Our business hours for responding to emails are 9am to 8pm ET M-F. Also check out this guide to learn more about the monitoring plans we offer. We look forward to hearing from you soon!

It's the first Alarm Grid video recap of September! We have some great new videos to show you, and we're hopeful that you find them helpful in setting up your system. Subscribe to our YouTube channel if you haven't yet, and stay tuned for future videos. Let's check out the newest videos.

Using a Qolsys IQ Panel 2 with a Phone Line

I explain how you cannot use the Qolsys IQ Panel 2 with a phone line connection. Phone line connectivity was once the most common communication path used with security systems. But with the rise of internet and cellular, that is no longer the case. Most newer panels like the IQ Panel 2 don't even have a jack for using a phone line. Instead, the system has built-in WIFI and cellular. Remember that activating for monitoring service with use of Alarm.com requires the activation of the system's cellular communicator.

Removing a Z Wave Device from a Qolsys IQ Panel 2

I show you how to remove, or clear, a Z-Wave device from the network by using a Qolsys IQ Panel 2 Plus. Clearing a Z-Wave device is typically done before enrolling it with the network to ensure that all the network data is properly wiped out. It is also done if the user no longer intends on using the Z-Wave device anymore. It is important to note that a device can still be cleared from the network even if it isn't actively enrolled with a Z-Wave hub.

Program SiXCT to Lyric Controller

I show you how to program a Honeywell SiXCT Door and Window Contact Sensor to a Honeywell Lyric Alarm System. The Honeywell SiXCT is a wireless door and window sensor that uses 128-bit AES encryption for enhanced wireless security. The sensor has a terminal block so that you can use it as a wireless transmitter with a wired contact sensor. The wireless range for the SiXCT is roughly 300 nominal feet, and it has a green LED light to assist with enrollment.

Program SiXMINICT to Lyric Controller

I show you how to program a Honeywell SiXMINICT to a Honeywell Lyric Alarm System. The SiXMINICT is a smaller version of the SiXCT. Unlike the SiXCT, the Honeywell SiXMINICT does not have a terminal block, and the sensor cannot be used as a wireless transmitter. It also has a smaller wireless signal range of only about 200 nominal feet. However, this door and window sensor is smaller than the SiXCT, and many users prefer the more compact design of the SiXMINICT. It retains the same green LED light to assist with enrollment.

Program a Honeywell SiXGB to the Lyric Security System

I show you how to program a Honeywell SiXGB Glass Break Sensor to a Honeywell Lyric Security System. As a member of the Honeywell SiX Series Lineup, the SiXGB utilizes 128-bit AES encryption, and it can only be used with the Lyric System. The wireless glass break sensor actively listens for the sound of breaking glass. It is great for monitoring windows and protective glass casings. The sensor has a detection range of roughly 25 feet, and it needs a direct line of sight to any glass being monitored.

Adding an External Communicator to a DSC PowerSeries NEO

I show you how to install an external communicator for a DSC PowerSeries NEO Security System. The PowerSeries NEO requires an added communicator for connecting with Alarm.com. The communicator connects with the DSC PCL-422 Module, which comes included. Then, a PC-Link cable connection is made between the NEO Panel and the PCL-422. Once the communicator is properly installed, you will need to activate it for monitoring service. Remember that you will need a monitoring plan that offers cellular communication.

Alarm Grid is closed today, Monday September 7th in observance of Labor Day. During this time, we will not be answering phones, and we will not be checking any emails. Please keep that in mind when contacting us for support or assistance. Our team will resume their usual duties on Tuesday.

If you need to contact us during this time, please email us at support@alarmgrid.com, and we will do our best to provide a response on Tuesday. If you need to put your system on test mode, then please call us at (888) 818-7728 and choose option [9], or use the convenient MyAlarms.com feature. We hope you have a fun and safe Labor Day, and we look forward to hearing from you on Tuesday.

Labor Day is Monday (Alarm Grid will be closed), and for many, Labor Day Weekend starts today! We know that many people will be traveling to visit their family and friends. We figured now was a good time to post some tips you can follow to ensure your home stays safe while you're away.

Arm Your System

This is a no-brainer, but please remember to Arm Away before you leave for the weekend. We feel silly stating the obvious, but we do occasionally hear about people who forget to Arm, and they pay the consequences. Remember that if you're monitored and have access to Total Connect 2.0 or Alarm.com, you can check on your phone to see if your security system is armed, even while you're traveling.

Leave Some Lights On

By leaving some lights on, you can make it appear that you are home, even if you're really on vacation. An intruder will think twice about trying anything if they see that lights are left on inside the home. You might even consider getting smart lights and setting an automation schedule so that they turn on and off at different times. Alarm Grid has a great selection of smart lights for you to consider.

Don't Brag On Social Media

We understand that you're very excited about your weekend travels, and you want to tell everyone about your plans. But hold your horses before you go letting the world know that your house will be vacant all weekend. A savvy intruder might check your social media page and use the information to their advantage. Instead, try letting close friends and family know discreetly via a phone call, text message, or private message on social media.

Check Your Sensors

It's a good idea to perform a routine system test before departing for a weekend getaway. This can be especially important for life-safety sensors like smoke detectors and CO sensors. Sure, you can still get an RF supervision loss notification via TC2 or ADC, but you're probably not going to be constantly staring at your phone during your vacation. Check your system beforehand so that you can focus on enjoying yourself. And remember to put your system on test mode before testing!

Don't Forget About Your Stove

Fire-safety is always important, and many people accidentally leave their stoves and grills on before leaving for the weekend. Take your time and make sure these appliances are off before you head out. And if you're hosting others, remember to turn off your stove or grill before you go and socialize. If you're concerned, then consider getting a 2GIG STVGRL1-345, which works well with the Lyric, the 345 MHz IQ2+, and all the 2GIG Alarm Panels.

Have a Fun Labor Day Weekend!

No matter how you enjoy your Labor Day Weekend, we hope that you have a fun and safe time with those who matter most to you. Remember that we will be away until Tuesday, so if you need to reach us, then email support@alarmgrid.com. Also keep in mind that if you need to put your Alarm Grid monitored system on test mode, you can do so at anytime by calling (888) 818-7728 and choosing option number (9). Have a great Labor Day Weekend!