Honeywell 5800PIR-COM Posts

Posted By

A great way to build out your Honeywell Lyric is with Honeywell 5800 Sensors. These are simple, 345 MHz wireless sensors that you can easily enroll with the system for security, life-safety, and environmental monitoring. They are perfect for expanding your system and making it more robust.

Honeywell lyric controller encrypted wireless security system

When you want to pair a Honeywell 5800 Sensor with the Lyric, the process is very straightforward. Put the Lyric in its auto-enrollment mode by choosing Security > Tools > enter Installer Code (default 4112) > Program > Zones > Add New > Serial Number. Make sure the RF Type on the right-hand side is set to 5800. Then activate the sensor either by faulting it or triggering its cover tamper switch. The Lyric should beep to confirm that it received a signal transmission. Then activate the sensor a second time to have the Lyric display the Serial Number. The third activation will confirm the Serial Number and return you to the screen where you can configure the zone settings.


Programming the zone settings for the sensor is actually quite simple. Depending on how you enrolled the sensor, you may need to adjust the Loop Number. This is almost always the case if you enrolled the sensor by activating its tamper switch. Refer to the instruction manual for the 5800 Sensor to determine which Loop Number to use.

The two (2) Zone Descriptors and the Device Type serve as the name for the sensor. You should choose a name that will help you identify the sensor, e.g. "Front Bedroom Motion Sensor", "South Hallway Door", etc. The Response Type determines how the system responds when the sensor is faulted. See our list of Lyric Response Types for more info.

Alarm Report should be set to Yes if you want the system to report out through AlarmNet to a Central Station if the zone causes an alarm on the system. That is an essential component of alarm monitoring services. Chime is optional, and it has the panel emit any one of several available sounds when the zone is faulted. Supervision tells the panel to look for an RF check-in signal from the sensor periodically to ensure that it is online. Click Save in the bottom-right after you finish adjusting the settings.


Keep in mind that only uni-directional (one-way) sensors from the Honeywell 5800 Series can be used with the Lyric. This leaves out bi-directional devices like the Honeywell 5800WAVE Siren, the Honeywell 5828 Keypad, and the Honeywell 5800RL Relay Module, so make sure you do not buy those for the Lyric. But you still have a lot of excellent sensors and security devices to choose from.

Below is a list of the Honeywell 5800 Sensors that you can use with the Honeywell Lyric:

Sensor Name
Notes
Honeywell 5800MINI
Honeywell 5800mini interior wireless door and window sensor
Door/Window sensor. Uses Loop 1.
Honeywell 5800PIR-RES
Honeywell 5800pir res wireless pet immune motion detector close up
PIR motion sensor. Uses Loop 1.
Coverage Area: 35' x 40'
Honeywell 5816
Honeywell 5816 wireless door window sensor
Door and window sensor.
Loop 1 = Terminal Block for NC Contact
Loop 2 = Reed Switch
Honeywell 5811
Honeywell 5811 wireless wafer thin door and window sensor
Door and window sensor. Uses Loop 1.
Honeywell 5800C2W
Honeywell 5800c2w hardwire to wireless system 9 zone conversion module
9-zone wired to wireless converter. Allows hardwired sensors to communicate with the Lyric as wireless devices. All zones use Loop 1 and a unique Serial Number ID.
Honeywell 5800CO
Honeywell 5800co wireless carbon monoxide detector
Carbon monoxide sensor.
Loop 1 = CO Detection
Loop 2 = End of Sensor Life (separate programming only required on TURBO and other V-Plex panels)
Honeywell 5800COMBO
Honeywell 5800combo smoke heat and co detector
Combination, smoke, heat, CO, and low-temperature sensor. Uses up to five (5) zones on the Lyric Panel. Has two (2) Serial Numbers for enrollment purposes.
Loop 1, SN 1 = Smoke/Heat Detection
Loop 2, SN 1 = Smoke/Heat Maintenance
Loop 3, SN 1 = Low Temperature Detection
Loop 1, SN 2 = CO Detection
Loop 2, SN 2 = End of Sensor Life (separate programming required only on TURBO and other V-Plex panels)
Honeywell 5800FLOOD
Honeywell 5800flood wireless flood and temperature sensor
Flood and temperature sensor.
Loop 1 = Low Temperature Detection
Loop 2 = High Temperature Detection
Loop 3 = Flood Detection
Honeywell 5800MICRA
Honeywell 5800micra wireless recessed window contact
Recessed window sensor. Uses Loop 1.
Honeywell 5800PIR
Honeywell 5800pir exterior of wireless motion detector
PIR motion sensor.
Loop 1 = Low Sensitivity Motion.
Loop 2 = High Sensitivity Motion.
Loop 3 = Low Temperature Detection
Coverage Area: 35' x 40'
Honeywell 5800PIR-COM
Honeywell 5800pir com exterior of wireless long range motion det
Commercial PIR motion sensor.
Loop 1 = Low Sensitivity Motion
Loop 2 = High Sensitivity Motion
Loop 3 = Low Temperature Detection
Coverage Area: 60' x 80'
Honeywell 5800PIR-OD
Honeywell 5800pir od wireless outdoor motion detector exterior
Outdoor PIR motion sensor. Uses Loop 1.
Honeywell 5800PIR-OD2
Outdoor PIR motion sensor. Uses Loop 1.
Honeywell 5800RP
Honeywell 5800rp wireless repeater
Wireless repeater for Honeywell 5800 Sensors. Does not require enrollment, but can be assigned a single zone for RF supervision, low-battery, AC loss, and RF jam detection. This is done using Serial Number 1 with Loop 1, with DIP Switch 2 set in the OFF position. Can also use up to four (4) separate zones for supervision when DIP Switch 2 is set to ON. This is required for UL installations.
Honeywell 5800RPS
Honeywell 5800rps wireless recessed door and window plunger sens
Recessed door/window sensor. Uses Loop 1.
Honeywell 5800SS1
Honeywell 5800ss1 exterior of wireless shock sensor
Shock sensor. Uses Loop 1.
Honeywell 5802MN
Honeywell 5802 wireless panic button
Medical alert button. Uses Loop 1.
Honeywell 5802MN2
Honeywell 5802mn2 wireless dual button medical alert
Medical alert button. Uses Loop 1.
Honeywell 5802WXT
Honeywell 5802wxt wireless panic button
Panic button. Uses Loop 1.
Honeywell 5802WXT-2
Honeywell 5802wxt 2 wireless dual button medical alert
Panic button. Uses Loop 1.
Honeywell 5806W3
Honeywell 5806w3 wireless smoke detector
Smoke detector. Uses Loop 1.
Honeywell 5808W3
Honeywell 5808w3 wireless smoke and heat detector
Smoke and heat detector.
Loop 1 = Smoke & Heat Detection
Loop 3 = Low Temperature Detection
Honeywell 5809
Honeywell 5809 wireless heat detector
Fixed temperature and rate-of-rise heat detector. Uses Loop 1. Alarm occurs when the temperature exceeds 135 degrees Fahrenheit, or when the temperature rises more than 15 degrees Fahrenheit per minute.
Honeywell 5809FXT
Honeywell 5809 wireless heat detector
Fixed temperature heat detector. Uses Loop 1. Alarm occurs when the temperature exceeds 135 degrees Fahrenheit.
Honeywell 5809SS
Honeywell 5809ss wireless fixed temperature slash ror heat detec
Fixed temperature and rate-of-rise heat detector. Uses Loop 1. Alarm occurs at 135 degrees Fahrenheit or when the temperature rises more than 15 degrees Fahrenheit per minute.
Honeywell 5814
Honeywell 5814 wireless small door sensor and window sensor
Door and window sensor. Uses Loop 1.
Honeywell 5815
Honeywell 5815 white wireless aesthetic door sensor and window s
Door and window sensor.
Loop 1 = Terminal Block for NC Contact
Loop 2 = Reed Switch
Honeywell 5816MN
Honeywell 5816mn wireless mini door sensor and window sensor
Door and window sensor.
Loop 1 = Terminal Block for NC Contact
Loop 2 = Reed Switches
Honeywell 5816OD
Honeywell 5816od wireless outdoor door and window sensor top
Outdoor door and window sensor.
Loop 1 = Terminal Block for NC Contact
Loop 2 = Reed Switch
Honeywell 5817
Honeywell 5817 wireless three zone sensor
Three (3) zone door and window sensor & transmitter.
Loop 1 = NC or NO (DIP Switch Selectable) unsupervised. It does not use an End of Line Resistor (EOLR)
Loop 2, 3 = NC Only. Both are unsupervised with no EOLR used
Honeywell 5817CBXT
Honeywell 5817cb wireless commercial sensor
Three (3) zone commercial transmitter.
Loop 1 = Two (2) Terminals; Primary Loop supervised by 470k Ohm (yellow, purple, yellow, gold) EOLR. Resistor must ALWAYS be installed, even if Loop 1 is not programmed. If Loop 1 is used as a burglary zone, then Loop 4 must be programmed as a separate zone for Cover Tamper protection.
Loop 2 = NC Reed Switch
Loop 3 = Two (2) Terminals; NC Loop unsupervised, no EOLR required
Honeywell 5817XT
Honeywell 5817xt three zone universal transmitter
Three (3) zone door and window sensor & transmitter.
Loop 1 = NC or NO (DIP Switch Selectable) unsupervised with no EOLR required
Loop 2, 3 = Two (2) Terminal Blocks, NC Only
Honeywell 5818MNL
Honeywell 5818mnl wireless recessed door sensor and window senso
Recessed door and window sensor. Uses Loop 1. Not suitable for use in metal doors
Honeywell 5819
Honeywell 5819 wireless shock processor and sensor
Three (3) zone shock processor.
Loop 1 = NC for Inertia Style External Shock Sensor. This input provides a suitable fast loop response of from 1ms to 20ms, based on dip switch setting
Loop 2 = Reed Switch
Loop 3 = NC for Wired Contact, unsupervised with no EOLR required
Honeywell 5819S
Honeywell 5819s wireless shock sensor and transmitter
Shock sensor and contact sensor.
Loop 1 = Built-in Inertia Style Shock Sensor
Loop 2 = Reed Switch
Loop 3 = NC for Wired Contact
Honeywell 5819WHS
Honeywell 5819whs wireless transmitter with integrated shock sen
Three (3) zone shock processor.
Loop 1 = NC, Built-in Inertia Style Shock Sensor
Loop 2 = Reed Switch
Loop 3 = NC for Wired Contact
Honeywell 5820L
Honeywell 5820l super slim wireless door and window sensor
Slimline door and window sensor. Uses Loop 1.
Honeywell 5822T
Honeywell 5822t wireless garage tilt sensor
Garage tilt sensor.
Loop 1 = NC for Wired Contact, unsupervised, no EOLR used
Loop 3 = Tilt Switch
Honeywell 5834-2
Honeywell 5834 2 wireless 2 button security key fob
Two (2) button key fob. Dual-button inputs allowed. Uses three (3) loops total, for a possible three (3) inputs. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5834-4
Honeywell 5834 4 wireless 4 button security key fob for honeywell security systems
Four (4) button key fob. Dual-button inputs allowed. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5834-4EN
Honeywell 5834 4en wireless enhanced 4 button security key fob
Four (4) button key fob. Dual-button inputs allowed. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5853
Honeywell 5853 wireless glass break detector exterior
Glass break sensor. Uses Loop 1.
Honeywell 5869
Honeywell 5869 wireless commercial panic switch
Commercial panic switch. Uses Loop 1. Latches when tripped, key (provided) needed to reset it after it is tripped
Honeywell 5878
Honeywell 5878 wireless remote alarm keypad
Six (6) button key fob. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible.
Honeywell 5898
Honeywell 5898 wireless dual tec motion detector
Dual-tec motion sensor.
Loop 1 = Low Sensitivity Motion Sensor. Pet immunity is available for this loop. 50lb or 100lb pet immunity, selectable via DIP Switch 1
Loop 2 = High Sensitivity Motion Sensor.
Loop 3 = Temperature Sensor (High or Low, DIP Switch Selectable)
Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Resideo (formerly Honeywell) has made a change to Total Connect 2.0 that now prevents Sensor Activity for motion sensors from being displayed in the Activity Log. The purpose of this change is to prevent the TC2 Activity Log from being flooded with "Sensor Open" events from motions.


If you aren't aware, the Activity Log on Total Connect 2.0 shows various activity affecting a Honeywell Security System. This includes sensor open and close events. Previously, motion sensor activity (namely, the sensor detecting movement) could be displayed in this Activity Log. However, Resideo found that many users had setup activity logs for motion zones without realizing what the feature really did. They were therefore flooding their TC2 Activity with "Sensor Open" and "Sensor Close" events as they walked around their property in the disarmed state.

To curb this issue, Resideo has disabled the Sensor Activity toggle switch on Total Connect 2.0 for all motion detection sensors with the Response Type of Interior Follower. This makes it impossible to enable Sensor Activity logging for motion sensors with the Interior Follower Response Type, meaning that motion sensor activity will no longer be displayed in the activity log. In addition, the sensor will not be displayed on the TC2 security card when faulted. The user must access the Sensors List to see the faulted motion sensor zone.

Most users will likely not mind this, as they wouldn't want to have the activity logs for their systems constantly being flooded with motion sensor activity. And fortunately, there are a couple of workarounds for this issue if you do want to be alerted regarding motion sensor activity on a particular sensor. Arguably the easiest solution is to change the Response Type for a motion sensor from Interior Follower to Interior w/ Delay.

The similar Response Type of Interior w/ Delay does not have the same restriction regarding Activity Logs as Interior Follower. The only major change with Interior w/ Delay is that it will always trigger an Entry Delay countdown, rather than an immediate alarm if the motion sensor is the first zone faulted while the system is in an Armed Away state. For more information on Honeywell System Response Types, please see this helpful FAQ.

Another option if you just want to be notified regarding sensor activity is to manually create a notification for the Interior Follower Motion Sensor within Total Connect 2.0. Luckily, we recently made an FAQ that outlines this very process. It will teach you all about text and email notifications for Total Connect 2.0. If you want to take a look, you can check it out here. We also recommend checking out this other guide that is more specific to Sensor Open/Close and Sensor Left Open Notifications.

If you are an Alarm Grid monitored customer and you need any additional help setting up your motion sensor for alerts, please reach out to us by emailing support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , , ,

Comments


Posted By

We strive to have some of the best pricing on the internet for security products. When prices are reduced for us, we do our best to quickly pass off those savings to anyone who has made a purchase here.

In the last week, we have reduced the prices on over 100 items an average of 6%. Our Lyric kits have all seen price reductions between 6% and 19%.

Below is the list of all items whose price has been reduced. We hope you enjoy the savings!

URL Old Price New Price % Change
Honeywell K4563 2.99 0.99 202%
UltraTech 1240 14.99 8.99 67%
Honeywell 5881ENM 126.99 77.99 63%
Honeywell 5881ENH 198.99 128.99 54%
System Sensor CO1224T 83.99 54.99 53%
UltraTech 1270 29.99 19.99 50%
Honeywell WAP-PLUS 95.99 63.99 50%
Leviton VRS15-1LZ 92.99 66.99 39%
Honeywell 719 17.99 12.99 38%
Honeywell 5802WXT-2 53.99 38.99 38%
Honeywell 5802WXT 53.99 38.99 38%
Honeywell 5815 47.99 34.99 37%
Honeywell 5899B 3.99 2.99 33%
Honeywell WAVE2 11.99 8.99 33%
Interlogix 600-1048-XT-ZX-AT 117.99 90.99 30%
Interlogix 600-1048-XT-ZX-VZ 117.99 90.99 30%
Honeywell L3000 199.99 155.99 28%
Honeywell SIXSIREN 78.99 64.99 22%
Honeywell SIXGB 78.99 64.99 22%
Honeywell 702 22.99 18.99 21%
Honeywell 955PST 5.99 4.99 20%
Honeywell GSMVLP5-4G 162.99 135.99 20%
Alarm Grid LYNX-WEXT 87.99 73.99 19%
Honeywell LyricPK-VZ 522.94 439.99 19%
Yale YRD210 246.99 207.99 19%
Honeywell LyricPK-AT 518.64 439.99 18%
Honeywell L7000PK10-WIFI-3G 639.99 550.99 16%
Honeywell LyricPK10-VZ 672.11 578.99 16%
Honeywell GSMV4G 187.99 161.99 16%
Alarm Grid LYNX-EXT 145.99 125.99 16%
Honeywell LKP500 119.99 103.99 15%
Honeywell 5881ENL 67.99 58.99 15%
Honeywell LyricPK 448.52 389.99 15%
Honeywell L7000PK10-WIFI 529.99 461.99 15%
Honeywell L7000PK-WIFI 399.99 348.99 15%
Honeywell GSMV4G-TC2 199.99 174.99 14%
Honeywell LyricPK10-AT 660.99 578.99 14%
Honeywell LyricPK10 614.99 541.99 13%
Honeywell L7000PK-WIFI-3G 499.99 442.99 13%
Honeywell L7000 279.99 249.99 12%
Honeywell GSMX4G 141.99 126.99 12%
Honeywell WAP-ANT5DB 9.99 8.99 11%
Honeywell GSMX4G-TC2 154.99 139.99 11%
Honeywell 5819WHS 64.99 58.99 10%
Honeywell 300-07052 10.99 9.99 10%
Honeywell Lyric Controller 299.99 272.99 10%
Honeywell iGSMV4G 190.99 174.99 9%
Honeywell 5800C2W 84.99 77.99 9%
Honeywell 4232CBM 115.99 106.99 8%
Honeywell 1361-GT 12.99 11.99 8%
Honeywell 6148 66.99 61.99 8%
Honeywell 5800RPS 53.99 49.99 8%
Honeywell 4204 82.99 76.99 8%
Telguard TG-1 Express 174.99 162.99 7%
SkyBell DBCAM 207.99 193.99 7%
Honeywell K14139 14.99 13.99 7%
Honeywell SiXCT 25.66 23.99 7%
Honeywell Lyric-CDMA 104.24 97.99 6%
Honeywell 747PD 16.99 15.99 6%
Honeywell 4229 102.99 96.99 6%
Honeywell Lyric-3G 103.99 97.99 6%
Honeywell SiXPIR 58.28 54.99 6%
Honeywell 5834-4EN 54.99 51.99 6%
Honeywell AD12612 19.99 18.99 5%
Honeywell 5822T 42.99 40.99 5%
Honeywell 6149EX 69.99 66.99 4%
Honeywell WA7626-CA 23.99 22.99 4%
Honeywell 4208U 97.99 93.99 4%
Honeywell 5883H 245.99 235.99 4%
Honeywell 5800WAVE 102.99 98.99 4%
Honeywell 5800RP 103.99 99.99 4%
Honeywell 5800Micra 53.99 51.99 4%
Honeywell ACU 134.99 129.99 4%
Honeywell IS280CM 82.99 79.99 4%
Leviton VRF01-1LZ 141.99 136.99 4%
Honeywell VISTA-20P 144.99 139.99 4%
Honeywell 710 31.99 30.99 3%
Honeywell 5800PIR 97.99 94.99 3%
Honeywell iGSMV4G-TC2 199.99 193.99 3%
Honeywell L5210PK10-WIFI 451.99 438.99 3%
Honeywell LYNXRCHKIT-SHA 34.99 33.99 3%
Honeywell IS25100TC 39.99 38.99 3%
Honeywell 5806W3 79.99 77.99 3%
Honeywell ZWSTAT 159.99 155.99 3%
Honeywell L5210 199.99 194.99 3%
Honeywell L5210PK10-3G 487.99 475.99 3%
Honeywell VISTA-21iPSIA 212.99 207.99 2%
Honeywell VISTA-21iP 212.99 207.99 2%
Honeywell FG1625F 44.99 43.99 2%
Honeywell FG1625 44.99 43.99 2%
Honeywell 4219 89.99 87.99 2%
Honeywell L5210PK-WIFI 322.99 315.99 2%
Honeywell 748 46.99 45.99 2%
Honeywell FG1625RFM 48.99 47.99 2%
Honeywell 748LC 48.99 47.99 2%
Honeywell SIXFOB 25.51 24.99 2%
Honeywell 5821 52.99 51.99 2%
Honeywell 5800PIR-COM 107.99 105.99 2%
Honeywell FG730 56.99 55.99 2%
Honeywell L5210PK10-WIFI-3G 537.99 528.99 2%
Honeywell L5210PK-3G 364.99 358.99 2%
Honeywell VISTA-128BPT 379.99 373.99 2%
Honeywell CE3 64.99 63.99 2%
Honeywell 5898 133.99 131.99 2%
Honeywell 5828V 134.99 132.99 2%
Honeywell 5816OD 71.99 70.99 1%
Honeywell 5869 84.99 83.99 1%
Honeywell 5800RL 85.99 84.99 1%
Honeywell L5210PK 272.99 269.99 1%
Honeywell L5210PK-WIFI-3G 414.99 410.99 1%
Honeywell 6164US 211.99 209.99 1%
Honeywell GSMVLP4G 149.99 148.99 1%
Honeywell IPCAM-WO 287.77 285.99 1%
Honeywell IPCAM-PT2 273.99 272.99 0%
Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments