Honeywell 5800RPS Posts

Posted By

Hi DIYers! Today, we're taking a look at our best wireless recessed door contacts. These devices are great for when you want sensors that are completely hidden and not visible when the door is closed. They take a little bit of extra effort to install, but it's worth it for many users!

Honeywell 5818mnl wireless recessed door sensor and window senso

When you have a recessed contact, you actually need to drill holes into the door and its frame. The hole in the frame is larger and sized to support the main sensor. The hole in the door is smaller and designed to support the magnet. Some recessed contacts use extremely small magnets that can be mounted without drilling holes. There is also the Honeywell 5800RPS, which uses a plunger switch rather than a magnet.

The key with wireless recessed contacts is knowing which ones are compatible with your system. This depends on the wireless receiver that your system has installed. If you have a hardwired panel with no wireless receiver, then you cannot use wireless sensors. It's really no different than any other wireless sensor. You might also want to know the size of the holes you will need to drill. For your convenience, we put together a nifty table that outlines nearly all of the information you could want:

Sensor Name & Picture
Wireless Frequency
Hole Size for Sensor
Hole Size for Magnet
Notes
Honeywell 5818MNL
Honeywell 5818mnl wireless recessed door sensor and window senso
345 MHz 3/4" Diameter, 3" Deep 3/8" Diameter, 1/2" Deep Honeywell 5800 Series Sensor. Compatible with all Honeywell and 2GIG Panels and 345 MHz IQ2+
Honeywell 5800RPS
Honeywell 5800rps wireless recessed door and window plunger sens
345 MHz 3/4" Diameter, 1.25" Deep None needed! Honeywell 5800 Series Sensor. Recessed plunger switch. Needs inner 1/4" hole in center of existing hole for antenna. Compatible with all Honeywell and 2GIG Panels and 345 MHz IQ2+
2GIG DW20R
2gig dw20r wireless recessed door slash window contact
345 MHz 11/16" Diameter, 2.6" Deep 11/16" Diameter, 1/2" Deep 2GIG 345 MHz Sensor. Compatible with all 2GIG Panels, Honeywell Lyric Controller and 345 MHz IQ2+
Interlogix TX-E221
Interlogix tx e221 wireless recessed door slash window sensor
319.5 MHz 3/4" Diameter, 2.5" Deep 3/4" Diameter, 1/2" Deep Interlogix/GE Sensor. Compatible with all Interlogix/GE Systems, legacy Qolsys Systems and 319.5 MHz IQ2+
Qolsys IQ Recessed Door-S
Qolsys iq recessed door s recessed door slash window sensor for
319.5 MHz 3/4" Diameter, 2.25" Deep 3/4" Diameter, 5/8" Deep Qolsys S-Line Sensor. Compatible with all Interlogix/GE Systems, legacy Qolsys Systems and 319.5 MHz IQ2+. Encrypted when paired with Qolsys IQ2 or IQ2+.
DSC EV-DW4917

433 MHz 11/16" Diameter, 3" Deep 3/4" Diameter, 5/8" Deep Legacy DSC Sensor. Compatible with all DSC Systems and 433 MHz IQ2+. Screw mount and press fit installation options available.
DSC PG9307

915 MHz 0.75" Diameter, 2.66" Deep None needed! PowerG Sensor. Uses a 2 mm magnet that requires no hole. Uses 128-bit AES encryption. Compatible with DSC PowerSeries Neo Panels, DSC Iotega, every IQ2+.

If you're monitored with Alarm Grid, or if you're interested in monitoring, our team would be happy to help you find the best wireless recessed contact for your needs. The best way to reach us is to email support@alarmgrid.com. You may also call us at (888) 818-7728 from 9am to 8pm EST M-F. We look forward to helping you find the perfect security equipment to protect your home or business!

Tags: , , , , , , , , , , ,

Comments


Posted By

Honeywell is known for producing some outstanding security equipment, and their wireless door and window contacts are no exception. With wireless contacts available from both the 5800 Series lineup and the SiX Series lineup, there are certainly some great options. But with all the possibilities, it might seem overwhelming if you are just getting started. This guide will help you choose the perfect wireless Honeywell door and window contact for your needs.

Honeywell 5820l super slim wireless door and window sensorFirst, a user should understand exactly how a door and window contact works. Almost every wireless Honeywell door and window contact functions using the exact same principles. These devices consist of a sensor and magnet. The sensor is the "brains" of the operation, and it is responsible for sending signals to the alarm system. It is typically installed on or inside the door or window frame. The magnet is installed on or inside the door or window itself. The only wireless Honeywell contact that does not use a magnet is the Honeywell 5800RPS. This is a wireless recessed sensor for doors only that operates using a plunger switch.

For proper operation, the device's magnet should be installed very close to the sensor. We usually recommend placing it within a half-inch of the sensor. However, some 5800 Series contacts, like the 5816OD, can function properly with a slightly larger spacing gap. When the door or window is opened, the magnet will separate from the sensor. This will cause a reed switch inside the sensor to activate. When this happens, the sensor will send a signal to the alarm system so that the programmed Response Type can be performed.

It's also important to know the system compatibilities for the different Honeywell wireless contacts. Their wireless contacts come from two different sensor lineups. These are the 5800 Series and the SiX Series. The 5800 Series contacts are unidirectional devices that operate at 345 MHz. This makes them compatible with any Honeywell System or 2GIG System. But the SiX Series contacts are bi-directional, fully encrypted sensors that communicate using 2.4 GHz WIFI. These sensors only work with Honeywell Lyric Systems.

Honeywell lyric controller encrypted wireless security system

If you have a Honeywell Lyric Controller, then you can choose between any Honeywell wireless contact on the market. But if you have a LYNX Touch or a VISTA System with an added wireless receiver, then you are restricted to the 5800 Series contacts. Additionally, if you are using a 2GIG GC3 or a 2GIG GC2, then you can use either 2GIG Contacts or Honeywell 5800 Series contacts. Any alarm systems that do not accept the 345 MHz frequency are unable to use Honeywell contacts.

The only two contacts in the Honeywell SiX Series Lineup are the Honeywell SiXCT and the Honeywell SiXMINICT. These are both wireless, surface-mount sensors that work exclusively with Honeywell Lyric Systems. What makes these sensors special is that they feature 128-bit AES encryption. Whenever the sensor sends a command to the Lyric System, the system must then send a secure response back to the sensor. The command will only go through if this secure response is received. Many security experts refer to this as a "digital handshake", and it is excellent for preventing any hacking attempts or wireless attacks.

The SiXCT and the SiXMINICT do have a few slight differences. Most notably, the SiXMINICT is smaller and more compact than the SiXCT. The SiXCT measures at 3.13”L x 1.61”W x 1"D, while the SiXMINICT measures at 2.44”L x 1.25”W x .45”D. So users who want a smaller sensors should go with the SiXMINICT. But the benefit of the SiXCT is that it features a larger wireless range (~300 feet) than the SiXMINICT (~200 feet). However, only users with particularly large properties should have to worry about signal range. One thing that these sensors do share in common is that they can both be batch-enrolled with the Lyric Controller.

  • Honeywell SiXCT - The standard SiX Series contact. Features a 300 foot range and encryption. Will only work with Lyric Systems.
  • Honeywell SiXMINICT - The more compact SiX Series contact. Provides a 200 foot range and encryption. For Lyric Systems only.

Honeywell sixct wireless door slash window contact for lyric conHoneywell sixminict wireless door slash window contact for lyric

But the SiX Series contacts aren't for everyone. For one, they will only work with the Lyric Systems. There are also no recessed contacts in the SiX Series lineup. Users who don't have a Lyric Controller or want a recessed sensor should look to the Honeywell 5800 Series instead. This is an incredibly diverse sensor lineup that has an appropriate contact option for virtually any situation. Any Honeywell or 2GIG System will work with these sensors. This includes any Lyric Controller, L7000, L5210, VISTA P-Series, 2GIG GC3, 2GIG GC2 and more. Most 5800 Series contacts feature a 150-200 foot wireless range that can be effectively doubled with the use of a 5800RP Wireless Repeater.

Honeywell l7000 wireless home security system with 7 inch screenHoneywell 5800rp wireless repeater

When selecting a 5800 Series Sensor, a user will choose between a surface-mount contact and a recessed contact. With a surface-mount contact, the sensor and the magnet are mounted on the outer surface of the door or window and its frame. But with a recessed contact, the sensor and magnet are installed inside the door or window and its frame. Surface-mount sensors are very easy to install, since they only require screws or double-sided foam tape. But the sensor will be visible on the outside of the door. Recessed sensors are more difficult to install since holes will need to be drilled. However, some users will appreciate the fact that recessed sensors are hidden.

For users who go with a surface-mount sensor there are certainly some great options in the 5800 Series. One of our favorites is the 5800MINI. This is a reliable sensor that boasts an impressive 200 foot range, despite its small size of just 2.2"H x 1"W x 0.25"D. This is arguably the best surface-mount contact in the Honeywell 5800 Series.

  • Honeywell 5800MINI - A small and discreet surface-mount contact. Offers a 200 foot wireless range. Great for almost any application.

Honeywell 5800mini interior wireless door and window sensor

But there are other surface-mount options than just the 5800MIIN. The 5816 is the most popular sensor that Honeywell has ever offered. It features a larger size and roughly the same range as the 5800MINI. But unlike the 5800MINI, the 5816 can be used as a wireless transmitter for a normally closed hardwired device. Honeywell also offers the 5820L Slim Line for narrow installations and the 5816OD for outdoor use.

  • Honeywell 5816 - Honeywell's most popular sensor. Can also be used as a wireless transmitter for a single NC hardwired device.
  • Honeywell 5820L - A slim line door and window contact that is great for narrow applications. Features a 150-foot range.
  • Honeywell 5816OD - A surface-mount contact for outdoor installations. Excellent for monitoring fences, sheds and detached garages.

Honeywell 5816 wireless door window sensorHoneywell 5816od wireless outdoor door and window sensor top


Honeywell also offers some less popular 5800 Series contacts. These include the 5811 (discontinued), the 5814, the 5815 and the 5816MN (discontinued). While these sensors will work just fine, there isn't really any reason to choose them over another 5800 Series contact.

  • Honeywell 5811 - A small and discreet sensor that has since been discontinued. Replaced by the Honeywell 5800MINI.
  • Honeywell 5814 - Another compact sensor option. It is not as robust as the 5800MINI. Its wireless range is only about 100 feet.
  • Honeywell 5815 - An aesthetically pleasing surface-mount contact that has roughly the same functionality as the 5816.
  • Honeywell 5816MN - A discreet surface mount sensor that has been discontinued. Replaced by the Honeywell 5816MN.

Honeywell 5814 wireless small door sensor and window sensorHoneywell 5815 white wireless aesthetic door sensor and window s

There are also several great recessed contacts in the 5800 Series. The Honeywell 5818MNL is a relatively standard recessed contact that can be used with almost any door or window. It features a 200-foot range, and the installation only requires minor drilling. The Honeywell 5800Micra is a recessed contact for windows only. It is a very small sensor with an attached antenna for sending wireless signals. Finally there's the 5800RPS, which uses a plunger switch instead of a sensor and magnet. This sensor can only be used with doors. When the door is closed, the plunger switch will be pressed in. Once the door is opened, the plunger switch will come out and activate the sensor.

  • Honeywell 5818MNL - A standard recessed contact for doors and windows. It is easy to install, and it has a 200 foot range.
  • Honeywell 5800Micra - A small recessed contact for windows only. Its antenna must be adjusted carefully when installing.
  • Honeywell 5800RPS - A recessed sensor that uses a plunger switch instead of a magnet. For use with doors only.

Honeywell 5818mnl wireless recessed door sensor and window sensoHoneywell 5800micra wireless recessed window contact

Alarm Grid has previously discussed the batteries used with door sensors. We recommend checking out that blog post for more information on which batteries to use with a door and window sensor. If you ever need any additional help choosing a Honeywell door and window contact for your DIY wireless alarm system, please feel free to send an email to support@alarmgrid.com. You can also contact one of our technical specialists by calling 888-818-7728 from 9am to 8pm EST M-F.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

Door alarm sensors, or contacts, are some of the most important devices used with security systems. These devices alert a user whenever their door is opened. They can be used on virtually any type of door. These might include a front door, a back door, screen doors, a patio door, a shed, cabinets and any door inside the building. We typically find that door alarm sensors are some of the easiest to use devices with an alarm system. But still, it can be helpful to read through a comprehensive guide explaining the full ins and outs of these devices. So it here is - everything you've ever to know about door alarm sensors.

Qolsys iq dw mini s encrypted wireless sensors for iq panel 2 qsThe Basics of Door Alarm Sensors

Most traditional door sensors feature a relatively simple design and premise. These devices usually consist of a sensor and a magnet. The sensor is placed on or inside the door frame, and the magnet is placed on or inside the door itself, within a half inch of the sensor. Opening the door will cause the magnet to pull away and separate from the sensor. When this happens, a reed switch inside the sensor will activate. This will cause the sensor to send a signal to the security system, letting it know that the door was opened. The system will then perform the appropriate response based on how the sensor's Response Type was programmed. At the surface, it's all very simple. Some examples of these traditional sensors include the Honeywell 5800MINI, the Honeywell SiXMINICT and the VERSA-2GIG Sensor. Traditional door sensors can be either surface-mounted or recessed.

Honeywell 5800mini interior wireless door and window sensor

There's also a second variation of door sensors, known as mechanical door sensors. This type of sensor features a physical switch that is pressed down when the door is closed. When the door is opened, the switch will pop up, causing the sensor to activate. From there, the system will perform the Response Type assigned to the zone for that sensor. This type of door alarm sensor is far less common than the other type of sensor. However, the end result is still the same - the system will still perform the programmed Response Type when the sensor is activated. An example of this type of sensor is the Honeywell 5800RPS. While you are less likely to come across this type of door sensor, it's still worth mentioning just in case. Mechanical door sensors are only available in the recessed variety.

Honeywell 5800rps wireless recessed door and window plunger sensTypes of Door Sensors - The Two Distinctions

Now that you know the very basics of door sensors, you can start thinking about the different types. While almost every door sensors operates using one of the two mechanisms mentioned above, there are two other distinctions that are commonly made between door sensors. These are whether the door sensor is wireless or wired and whether the door sensor is surface-mounted or recessed. These considerations will play a big role in determining which door sensor you choose to purchase for your alarm system.

A wireless door sensor will communicate with an alarm system wirelessly. This will prevent the need for running a wire from the system to the door sensor. This can make wireless door sensors significantly easier to install. Another great aspect of wireless door sensors is that they can usually be auto-enrolled with the security system. That said, a wireless sensor will need to have its battery replaced every three to five years. On the other hand, a wired door sensor will need to be physically connected with the alarm system. This can make the installation considerably more difficult in certain cases. However, a wired sensor will never require any battery replacements.

If you are using a wireless door sensor with a wired alarm system, such as a Honeywell VISTA Panel, then you will need to use a wireless receiver. This will allow the wireless signal to be received by the system. When choosing a wireless door sensor, make sure that the wireless frequencies it uses are compatible with your alarm system. For example, Honeywell Panels look for wireless signals that operate at a frequency of 345 MHz, while Qolsys Panels use signals that operate at a frequency of 319.5 MHz. If you try to use a wireless door sensor that does not communicate at the correct wireless frequency, then it will not function with the alarm system.

Honeywell 5800rp wireless repeaterThe other major distinction between door sensors is surface-mount sensors versus recessed sensors. Simply put, surface-mount sensors are installed on the outside of the door and its frame, while recessed sensors are installed in the inside. Surface-mount sensors require no drilling. In the easiest scenario, it is possible to mount them using a double-sided adhesive (foam tape). They can also be mounted using screws. With their easier installation, this is generally the preferred type of door sensor. Most users do not mind the fact that a small sensor will be visible on the outside of the door.

Honeywell 5820l super slim wireless door and window sensorHowever, for users who do want a more discrete installation, there are recessed door sensors. These sensors and their magnets need to be inserted into holes that are drilled into both the door and the frame. The exact size of the holes will depend on the specific model of the recessed door sensor that is being installed. Once the sensor and magnet have been installed, they will not be visible from the outside. That said, most users opt for surface-mount door sensors due to the easier installation.

Honeywell 5818mnl wireless recessed door sensor and window senso

Some Notes on Response Types

The primary function of any security sensor is determined by its Response Type. This refers to what action the system will take when the zone is faulted (e.g. the door is opened). Below are the Response Types that are most commonly used with door sensors:

  • Entry / Exit: If the door is opened while the system is armed stay or armed away, then the system will need to be disarmed within its entry delay period. If the system is not disarmed within this time period, then an alarm event will occur. Most alarms will feature two different Entry / Exit settings. This allows two different entry delay periods to be used on the same system for different zones.
  • Perimeter: If the door is opened while the system is armed stay or armed away, then an alarm event will occur immediately.
  • Interior Follower: If the system is set to armed away, an alarm event will immediately occur if the door is opened, assuming that an entry / exit zone is not faulted first. If an entry / exit zone is faulted first, then the system must be disarmed within its entry delay period, otherwise an alarm event will occur.
  • Interior With Delay: If the system is set to armed away and the door is opened, then the system must be disarmed within its entry delay period. If the system is not disarmed within this time period, then an alarm event will occur.
  • Day / Night: If the system is disarmed and the door is opened, a trouble event will occur on the system. If the system is armed away or armed stay and the door is opened, an alarm event will immediately occur on the system.
  • 24 Hour Audible: Opening the door will immediately cause a full system siren and an alarm to be set off, regardless of what state the system is currently in. This Response Type should not be used unless the door should never be opened for any reason.
  • 24 Hour Auxiliary: Same as 24 Hour Audible, but only the panel itself will produce a siren. Any external sirens or noisemakers will not activate. This zone type is ideal for emergency medical cabinets that would only be opened in a serious medical emergency.
  • 24 Hour Silent: Same as 24 Hour Audible, but no siren or sound will be produced.
  • Fire No Verification: Opening the door will immediately cause a fire alarm to be set off, regardless of what state the system is currently in. This is the ideal Response Type for fire doors.

Certain Response Types are only available for certain Device Types. Depending upon the panel you are using, not all of these Response Types will be made available for the Device Type of "Door". A way to work around this is to set the Device Type to "Other". This will allow you to set any possible Response Type for the door sensor.

2gig dw10 wireless slim door slash window contactOther Programming Settings

Programming a door sensor has to do with more than just the Response Type and the Device Type. Below are some of the other programming settings available for a door sensor. Please note that these settings are specific for a Honeywell Lyric Controller, and different settings may be available on another type of panel.

  • Serial Number: This is how the system will specifically identify the exact door sensor that is being used.
  • Loop Number: This tells the door sensor what function it should perform. Each door sensor usually has a specific loop number that should be set for the device to function as a door sensor. Some door sensors have multiple possible functions that can be used with the device. One example is the Honeywell 5816, which can be used as both a door sensor and as a wireless transmitter depending upon the loop number that is set.
  • Zone Descriptors: These serve as the name of the door sensor. The panel will announce the zone descriptors whenever the zone for that sensor is affected.
  • Alarm Report: This tells the system whether or not it should send an outbound signal to the central monitoring station. If you turn this off, then all the sounds and sirens will still be made, but a distress signal will never be sent to the central station. An example for turning this off might be if you are monitoring a liquor cabinet to make sure your teenage doesn't get into it. You might want a very loud siren to go off so that you know if this happens. However, you obviously wouldn't want the police to show up at your house in this situation!
  • Chime: This will have the panel produce a simple chime whenever the door is opened. Many panels will allow you to toggle between different chime options for the panel. Remember, you will still need to have the local chime for the system enabled from the main settings menu.
  • Supervision: This will have the system monitor the door sensor for low battery or loss of signal. Keep this enabled to make sure that the door sensor is always in proper working order. This setting is only used with wireless door sensors.

For any programming questions related to a specific panel, please consult the programming guide for that panel. This information is readily available on the Alarm Grid website in the form of FAQs.

Honeywell 5816 wireless door window sensor

Common Door Sensor Questions

Below are some questions that are commonly asked about door sensors:

1. How do I program my door sensor?

If it is a wireless door sensor, it can most likely be auto-enrolled.This is accomplished by accessing zone programming on the system and then faulting and restoring the door sensor three times to learn it in. You can fault and restore the door sensor by separating the sensor and the magnet and then clicking them back together. From there, make any necessary programming configurations on the panel. See the above information on Response Types and other programming settings.

If it is a wired door sensor with a hardwired VISTA Panel, then we recommend consulting this FAQ. You may also need to consult the VISTA 15P and 20P Programming Guide.

Honeywell vista 15p alarm control panel

2. How long do door sensor batteries last?

A wireless door sensor will typically require a battery replacement every three to five years. Wired door sensors do not use batteries, and they will never require a battery replacement.

Panasonic cr123a 3v battery

3. How close should the door sensor be to its magnet?

We usually recommend placing the door sensor magnet within a half inch of the sensor. Some sensors may allow for a greater separation distance than others before a faulted zone will occur. The closer the magnet is to the sensor, the less likely an unwanted fault or a false alarm is to occur.

Honeywell 5899 magnet for 5816 wireless door sensor and window s

4. Are there any encrypted wireless door sensors?

Yes, there are encrypted wireless door sensors. The Honeywell SiXCT, the Honeywell SiXMINICT, the Qolsys IQ DW MINI-S and the Qolsys IQ Recessed Door-S are all encrypted wireless door sensors.

Honeywell sixct wireless door slash window contact for lyric con

5. What is the best door sensor?

Please see the following FAQs:

Tags: , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments


Posted By

We strive to have some of the best pricing on the internet for security products. When prices are reduced for us, we do our best to quickly pass off those savings to anyone who has made a purchase here.

In the last week, we have reduced the prices on over 100 items an average of 6%. Our Lyric kits have all seen price reductions between 6% and 19%.

Below is the list of all items whose price has been reduced. We hope you enjoy the savings!

URL Old Price New Price % Change
Honeywell K4563 2.99 0.99 202%
UltraTech 1240 14.99 8.99 67%
Honeywell 5881ENM 126.99 77.99 63%
Honeywell 5881ENH 198.99 128.99 54%
System Sensor CO1224T 83.99 54.99 53%
UltraTech 1270 29.99 19.99 50%
Honeywell WAP-PLUS 95.99 63.99 50%
Leviton VRS15-1LZ 92.99 66.99 39%
Honeywell 719 17.99 12.99 38%
Honeywell 5802WXT-2 53.99 38.99 38%
Honeywell 5802WXT 53.99 38.99 38%
Honeywell 5815 47.99 34.99 37%
Honeywell 5899B 3.99 2.99 33%
Honeywell WAVE2 11.99 8.99 33%
Interlogix 600-1048-XT-ZX-AT 117.99 90.99 30%
Interlogix 600-1048-XT-ZX-VZ 117.99 90.99 30%
Honeywell L3000 199.99 155.99 28%
Honeywell SIXSIREN 78.99 64.99 22%
Honeywell SIXGB 78.99 64.99 22%
Honeywell 702 22.99 18.99 21%
Honeywell 955PST 5.99 4.99 20%
Honeywell GSMVLP5-4G 162.99 135.99 20%
Alarm Grid LYNX-WEXT 87.99 73.99 19%
Honeywell LyricPK-VZ 522.94 439.99 19%
Yale YRD210 246.99 207.99 19%
Honeywell LyricPK-AT 518.64 439.99 18%
Honeywell L7000PK10-WIFI-3G 639.99 550.99 16%
Honeywell LyricPK10-VZ 672.11 578.99 16%
Honeywell GSMV4G 187.99 161.99 16%
Alarm Grid LYNX-EXT 145.99 125.99 16%
Honeywell LKP500 119.99 103.99 15%
Honeywell 5881ENL 67.99 58.99 15%
Honeywell LyricPK 448.52 389.99 15%
Honeywell L7000PK10-WIFI 529.99 461.99 15%
Honeywell L7000PK-WIFI 399.99 348.99 15%
Honeywell GSMV4G-TC2 199.99 174.99 14%
Honeywell LyricPK10-AT 660.99 578.99 14%
Honeywell LyricPK10 614.99 541.99 13%
Honeywell L7000PK-WIFI-3G 499.99 442.99 13%
Honeywell L7000 279.99 249.99 12%
Honeywell GSMX4G 141.99 126.99 12%
Honeywell WAP-ANT5DB 9.99 8.99 11%
Honeywell GSMX4G-TC2 154.99 139.99 11%
Honeywell 5819WHS 64.99 58.99 10%
Honeywell 300-07052 10.99 9.99 10%
Honeywell Lyric Controller 299.99 272.99 10%
Honeywell iGSMV4G 190.99 174.99 9%
Honeywell 5800C2W 84.99 77.99 9%
Honeywell 4232CBM 115.99 106.99 8%
Honeywell 1361-GT 12.99 11.99 8%
Honeywell 6148 66.99 61.99 8%
Honeywell 5800RPS 53.99 49.99 8%
Honeywell 4204 82.99 76.99 8%
Telguard TG-1 Express 174.99 162.99 7%
SkyBell DBCAM 207.99 193.99 7%
Honeywell K14139 14.99 13.99 7%
Honeywell SiXCT 25.66 23.99 7%
Honeywell Lyric-CDMA 104.24 97.99 6%
Honeywell 747PD 16.99 15.99 6%
Honeywell 4229 102.99 96.99 6%
Honeywell Lyric-3G 103.99 97.99 6%
Honeywell SiXPIR 58.28 54.99 6%
Honeywell 5834-4EN 54.99 51.99 6%
Honeywell AD12612 19.99 18.99 5%
Honeywell 5822T 42.99 40.99 5%
Honeywell 6149EX 69.99 66.99 4%
Honeywell WA7626-CA 23.99 22.99 4%
Honeywell 4208U 97.99 93.99 4%
Honeywell 5883H 245.99 235.99 4%
Honeywell 5800WAVE 102.99 98.99 4%
Honeywell 5800RP 103.99 99.99 4%
Honeywell 5800Micra 53.99 51.99 4%
Honeywell ACU 134.99 129.99 4%
Honeywell IS280CM 82.99 79.99 4%
Leviton VRF01-1LZ 141.99 136.99 4%
Honeywell VISTA-20P 144.99 139.99 4%
Honeywell 710 31.99 30.99 3%
Honeywell 5800PIR 97.99 94.99 3%
Honeywell iGSMV4G-TC2 199.99 193.99 3%
Honeywell L5210PK10-WIFI 451.99 438.99 3%
Honeywell LYNXRCHKIT-SHA 34.99 33.99 3%
Honeywell IS25100TC 39.99 38.99 3%
Honeywell 5806W3 79.99 77.99 3%
Honeywell ZWSTAT 159.99 155.99 3%
Honeywell L5210 199.99 194.99 3%
Honeywell L5210PK10-3G 487.99 475.99 3%
Honeywell VISTA-21iPSIA 212.99 207.99 2%
Honeywell VISTA-21iP 212.99 207.99 2%
Honeywell FG1625F 44.99 43.99 2%
Honeywell FG1625 44.99 43.99 2%
Honeywell 4219 89.99 87.99 2%
Honeywell L5210PK-WIFI 322.99 315.99 2%
Honeywell 748 46.99 45.99 2%
Honeywell FG1625RFM 48.99 47.99 2%
Honeywell 748LC 48.99 47.99 2%
Honeywell SIXFOB 25.51 24.99 2%
Honeywell 5821 52.99 51.99 2%
Honeywell 5800PIR-COM 107.99 105.99 2%
Honeywell FG730 56.99 55.99 2%
Honeywell L5210PK10-WIFI-3G 537.99 528.99 2%
Honeywell L5210PK-3G 364.99 358.99 2%
Honeywell VISTA-128BPT 379.99 373.99 2%
Honeywell CE3 64.99 63.99 2%
Honeywell 5898 133.99 131.99 2%
Honeywell 5828V 134.99 132.99 2%
Honeywell 5816OD 71.99 70.99 1%
Honeywell 5869 84.99 83.99 1%
Honeywell 5800RL 85.99 84.99 1%
Honeywell L5210PK 272.99 269.99 1%
Honeywell L5210PK-WIFI-3G 414.99 410.99 1%
Honeywell 6164US 211.99 209.99 1%
Honeywell GSMVLP4G 149.99 148.99 1%
Honeywell IPCAM-WO 287.77 285.99 1%
Honeywell IPCAM-PT2 273.99 272.99 0%
Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Comments