Promotional Posts

Posted By

While many alarm panels have been outfitted with LTE cellular communicators to accommodate the 3G and CDMA Sunset, one system that is being left behind is the Honeywell L5100. Luckily, we have two (2) great panel upgrade options if you want to continue receiving cellular alarm monitoring.


Without getting too in-depth, the 3G and CDMA Sunset will leave the Honeywell L5100 with no functional cellular communicator option. This is because any Honeywell GSMVLP5-4G units that are currently activated for monitoring service will stop working once the associated AT&T 4G Network is shut down. If you are still using a Honeywell L5100 with a GSMVLP5-4G for cellular monitoring, then it is crucial that you upgrade to a new system as soon as possible. This is the only way that you can continue receiving cellular monitoring service. Remember, cellular connectivity represents the most reliable communication path available for an alarm system. We strongly urge you to not wait until the end of the 3G/CDMA Sunset.

Unless you have some specific knowledge of security systems, then you may have trouble determining which alarm panel you should get to replace your Honeywell L5100. That is where we are able to help. We have two (2) recommended systems if you are needing to upgrade. Both of these system options will allow you to continue using the majority of your existing sensors, and they will provide some great new features that you can take advantage of. We will briefly discuss both of these options so that you can make an informed decision.


Honeywell Lyric


If you want to stick within the Honeywell banner, then the Lyric is a great option. It has two (2) excellent LTE cellular communicator options in the Honeywell LYRICLTE-A AT&T LTE Communicator and the Honeywell LYRICLTE-V Verizon LTE Communicator, and it can readily support all of the one-way Honeywell 5800 Sensors used with the L5100. This system is preferred by users who want to continue using Total Connect 2.0, as well as any Honeywell IP Cameras. The makes the Lyric the go-to option if you are currently using security cameras with your L5100. The Lyric is also preferred if you are a regular iOS user, and you want to integrate your security system with your Apple HomeKit Network.


Qolsys IQ Panel 2 Plus 345 MHz

For L5100 users who don't necessarily feel married to Total Connect 2.0, and who also don't really care about HomeKit compatibility, jumping ship to a different manufacturer is an option. The Qolsys IQ Panel 2 Plus 345 MHz is hard to ignore. It can also support your existing one-way Honeywell 5800 Wireless Sensors right out of the box. You will need to make the switch from Total Connect 2.0 to Alarm.com, but this transition is fairly seamless if you don't have cameras set up. And while the IQ2+ might not have HomeKit, it does offer its own unique benefits like Z-Wave Plus functionality, automatic Bluetooth disarming, and partitioning support. You won't find any of those features on the Lyric. Just remember to choose the 345 MHz IQ2+ in the silver and white box to continue using your old Honeywell 5800 Sensors.


We're Here to Help!

There isn't a truly one-size-fits-all solution for existing Honeywell L5100 users. For some, the Lyric is the best option. But other users can get more mileage out of the Qolsys IQ Panel 2 Plus 345 MHz. Although we gave you some general guidelines and considerations above, you may still want some more advice on which move to make. Our security system planners are happy to help you determine which system is right for you.

Upgrading early is the best way to ensure that you do not experience any interruptions in your monitoring service. If you are a Honeywell L5100 user looking to plan for the future, feel free to email our team at support@alarmgrid.com. We will check your email during our usual business hours of 9am to 8pm ET and respond back at our earliest opportunity. We look forward to helping you plan out the long-term security solution for your home or business!

Tags: , , , , , ,

Comments


Posted By

We are happy to announce that some new products are available on our site. The Linear GD00Z-7 Garage Door Opener and the Alarm.com ADC-SWM150 Smart Water Valve and Meter can both be purchased from Alarm Grid. Both devices use Z-Wave Plus technology for communicating with a compatible hub.


Starting with the Linear GD00Z-7, this new Z-Wave Plus unit replaces the older Linear GD00Z-5 model previously offered on our site. This new unit connects with a compatible garage door motor to provide smart control for the connected garage door. You can open and close your overhead garage door using an interactive service platform like Alarm.com, and you can also include the device with smart scenes for automation operation.

Unlike previous models, the new Linear GD00Z-7 can utilize the S2 Security Protocol when it is paired with a Z-Wave Plus controller that supports the protocol. This is only available on the most advanced Z-Wave controllers, including the Qolsys IQ Panel 2 Plus once the Z-Wave Firmware is upgraded to Version 6.81.03. It is also backwards compatible with most other Z-Wave controllers, where it will simply use the older S0 Protocol. However, it cannot be used with the wireless Honeywell Panels. Any Lyric or LYNX Touch owner should still get the Honeywell GDCK, which is also sold by Alarm Grid.

As for the Alarm.com ADC-SWM150, it is a complete smart water valve and meter that can be used for both controlling water flow and monitoring water usage for energy monitoring and consumption purposes. Once installed, the unit detects leaks of any size in the building, and you can access it remotely to shut off the main water supply in the event of a leak.

If you have ever experienced a flood or serious water leak, then you know how costly of a situation it can become. Being able to shut off the water flow remotely can really come in handy when time is of the essence. Many users will pair the ADC-SWM150 with one or more flood detection sensors and build smart scenes to have the water shut off automatically once a sensor is triggered.

The difference between the ADC-SWM150 and the previously released ADC-SWV100 is that the new ADC-SWM150 also includes an advanced water meter for tracking water usage and flow. If a leak occurs, whether it be from a burst pipe or a dripping faucet, you can see the information on the mater. Also included with the ADC-SWM150 is the ability to use the S2 Security Protocol when paired with a compatible Z-Wave Plus controller.


Both the Linear GD00Z-7 and the Alarm.com ADC-SWM150 are available now from the Alarm Grid website. If you have any questions about either of these products, please reach out to us by emailing support@alarmgrid.com. We check email during our usual business hours of 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , ,

Comments


Posted By

As you may know, the fall season began earlier this week. This means that cooler temperatures are on the way. If you want to prepare your home or business, then you will certainly want to consider getting some low-temperature freeze sensors. Nearly every system has good options available!

Freeze sensors alert your system when the temperature in the building drops to a dangerously low level, usually due to the HVAC system being broken. Having one of these sensors in your home or business is crucial for monitoring the building while you are away. The consequences of having below-freezing temperatures in your home or business can be dire. The pipes can freeze, and major damage can occur. Installing a freeze sensor is small price to pay to prevent this from happening.

Most freeze sensors are designed to alert a system before freezing temperatures occur. Usually, a freeze sensor will activate at or around 40°F to alert the system. This a little bit higher than 32°F, which is when water begins to freeze. This function is intentional, as the user will hopefully be alerted to the situation with enough time to take action. Many users will set up notifications on an interactive service platform used with their alarm systems so that they are notified via text and/or email when a freeze sensor activates while they are off-site. This is possible in both Total Connect 2.0 and Alarm.com.

The main thing to consider when choosing a freeze sensor is whether or not it will work with your security system. If you know which sensor lineups are compatible with your system, then you likely already have a good idea which sensors will work. But we'll list out some of the more popular options to get you started. A very versatile 345 MHz freeze sensor that will work with the Honeywell Lyric, the Honeywell LYNX Touch Panels, and any 2GIG Panel is the Honeywell 5821. This sensor can also be used for flood detection if a probe is added.


If you have a PowerG-compatible system, such as any version of the Qolsys IQ Panel 2 Plus, then you might consider the DSC PG9905 Temperature Sensor. Many users prefer PowerG Sensors like the the PG9905 due to their superior wireless range and 128-bit AES encryption. If you have an original, non-Plus IQ Panel 2, then the 319.5 MHz Qolsys IQ Temp-S is a good choice. The Qolsys IQ Temp-S will utilize rolling code encryption when paired with the IQ Panel 2. Users of the 2GIG GC3e and 2GIG GC2e also have a good encrypted freeze sensor option in the 2GIG FT6e-345. There's also the non-encrypted 2GIG FT6-345 for users of the older 2GIG GC3 and 2GIG GC2 Systems.

Alarm Grid wants to help you keep your home or business comfortable this winter, as well as for many more winters to come. If you need help choosing a freeze sensor, then please don't hesitate to reach out to us. We are also happy to discuss monitoring services that you might use to receive alerts regarding a freeze sensor that activates while you are away from your home or office, The best way to reach us is to email support@alarmgrid.com. We check our email during our usual business hours of 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , ,

Comments


Posted By

Alarm.com has won a 2020 New Product of the Year Award from Security Today for their Wellness Camera, also known as the Alarm.com ADC-V622-WELL. The Alarm.com Wellcam won the award in the Fire & Life-Safety category. We congratulate Alarm.com and their Wellcam for their continued success.


With social distancing guidelines still in effect due to the ongoing COVID-19 pandemic, the Alarm.com Wellcam has proven to be highly effective in helping many doctors, nurses, and other hospital staff communicate with patients, while still maintaining a safe distance. The product was actually first unveiled at ISC 2018 a couple of years ago, but it's good to see it really shine during an era of social distancing.

Alarm.com Vice President of Products Steve Chazin said of the award, "The need to stay connected with family and loved ones is greater now than ever before. Wellcam extends the power of modern security systems to help protect and connect people wherever they live. We're thrilled that Security Today deems Wellcam a New Product of the Year. This recognition underscores just how critical innovations like Wellcam are in helping all of us look after one another, regardless of whether we're feet or miles apart."

The Alarm.com Wellcam is loaded with excellent features that help it to thrive both as a wellness camera and as a security camera in general. The device offers 1080p recording capabilities, a 180° viewing angle, 6 MP zoom, and IR night vision of up to 15 feet. This helps ensure that the camera captures detailed video of any activity that occurs in the room. The camera also has a call-button on top that a patient or monitored individual can use to call for help, if needed. A built-in microphone and Bluetooth speaker allows the individual to engage in a two-way voice call with the monitoring party through Alarm.com. The speaker can also be used for entertainment purpose, including streaming music and podcasts.

Alarm.com originally designed the Wellcam for use with the Alarm.com Wellness Platform. But the capabilities of the device have really been put to the test with the ongoing pandemic. Needless to say, the Alarm.com Wellcam has passed with flying colors. Like all Alarm.com Cameras, the Wellcam is designed exclusively for use with the Alarm.com platform. You can get started using the camera by getting an Alarm Grid Platinum Plan or an Alarm Grid Video Monitoring Plan. More information about our monitoring plans can be found in this post.

If you have any questions about the Alarm.com Wellcam, or any other products or services relating to Alarm.com, please don't hesitate to reach out to us! The best way to contact us is to email support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , ,

Comments


Posted By

While we love talking about our various security products, we also want to remind everyone about the security stickers and yard signs we offer. These goodies provide a great way to display our logo and let others know that you are monitored. You can buy them a-la-carte on our website.

Alarm grid security yard signs christmas signs

The purpose of our yard signs and window stickers is quite simple. You put them around your property to let others know that you are monitored by Alarm Grid. This will discourage intruders from trying to get into your home. Even if your security system works perfectly during a home invasion, an intruder might still cause damage during the break-in process. Therefore, the best case scenario is to prevent the bad guys from even trying to begin with. Intruders are less likely to target homes with alarm systems, so putting up stickers and yard signs serve as an excellent deterrence tool.

Alarm Grid sells two (2) types of window stickers. Our indoor window stickers have an adhesive front, and you place them on the inside of a window, facing the outside. Anyone who looks at the window will see it peeking. We also sell outdoor window stickers with an adhesive backing. The outdoor stickers are super versatile, and many users get creative by placing them on refrigerators, mailboxes, laptops, and even cars! Stickers are available in regular and mini sizes. Mini window stickers are sold in packs of 1, 5, and 10.

Alarm grid inside security stickers

While our stickers are ideal for posting around the home or office, a security yard sign is a bit more tangible. These yard signs come with a metal stake that you can push into the ground to keep them upright. A hammer can be useful for pushing the stake into the ground. You then secure the sign to the metal stake using the included hardware. And just like that, you will have a prominent sign outside your home or office deter any burglars from entering!

Alarm grid security yard signs christmas signs

We give away signs and stickers to newly monitored customers as a free gift. Make sure to ask when you sign up for monitoring. And if you want some extra ones, they are available for purchase on our website. You can get single stickers for just 99 cents plus shipping, so they are super convenient to add to an existing order. If you have any questions about our stickers or yard signs, feel free to email us at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. Also remember to check out this page to learn more about our monitoring plans. We look forward to hearing from you!

Tags: , , , , , , , , , , , , , , ,

Comments


Posted By

After much anticipation Firmware Version 2.5.3 for the Qolsys IQ Panel 2 Plus is now available! This update brings support for the PowerG Wired to Wireless Converter, as well as some other new features. Everyone with an IQ Panel 2 is encouraged to download the update as soon as possible.

Qolsys iq panel 2 plus verizon lte with powerg s line and legacy

Support for the DSC PG9WLSHW8 PowerG Wired to Wireless Converter is the biggest new addition for Firmware Version 2.5.3. We covered the PowerG Wired to Wireless Converter extensively in a post last month. But just as a quick recap, the device allows to you to connect hardwired sensors so that they can communicate with the IQ Panel 2 Plus wirelessly across the PowerG protocol. This is an excellent way to upgrade from an older hardwired system, as it can prevent you from having to purchase entirely new wireless sensors.

The PG9WLSHW8 also includes all the benefits of PowerG. This includes a wireless range of up to 2,000 feet away from the IQ2+ in an open air environment, military grade 128-bit AES encryption, and Frequency Hopping Spread Spectrum (FHSS) technology for added protection. Up to eight (8) hardwired zones are built into a single converter, and you can use up to two (2) of the PG9WLSHW8 units per IQ2+ System. The unit even offers support for 2-wire or 4-wire smoke detectors, plus a 700mA supervised output for adding a wired siren.


Of course, IQ Panel 2 Firmware Version 2.5.3 includes a huge bundle of other new features and functions. Even if you don't plan on adding a DSC PG9WLSHW8 unit, there are still many other reasons to receive the upgrade. We'll touch on all the other new additions below.

The IQ2 system now has Panel Ambient Noise Detector settings to adjust noise threshold and duration. Qolsys added this feature with MDU settings where noise complaints are a concern. The feature can be used in-place of the panel's built-in glass break sensor. Alarm.com is planning to add back-end support for this feature sometime in the future.

Alarm.com commercial customers will be able to take advantage of their Smarter Business Temperature Monitoring (SBTM) service plan, which is used in conjunction with the DSC PG9905 PowerG Temperature Sensor. The SBTM service plan allows for 24/7 monitoring, real-time alerts, and historical temperature reporting. It is designed with businesses like restaurants, grocery stores, and pharmacies in mind. Alarm Grid customers with Alarm.com commercial accounts can contact us for more information. In addition, the IQ2+ can now display a trouble condition when an external probe is disconnected from the DSC PG9905.


If you use Alarm.com for solar energy monitoring, then you will be pleased to know that IQ Panel 2 Firmware Version 2.5.3 offers the ability to provide information from your solar inverter right on your security panel! Solar inverter units from SolarEdge and Enphase are supported. Please see this prior blog post for more info about Alarm.com Solar Monitoring.

Thinking ahead, Qolsys has made Firmware Version 2.5.3 compatible with future Z-Wave 700-Series daughter cards. The 700-Series of Z-Wave will represent the successor to Z-Wave Plus, also known as the Z-Wave 500-Series. Like all new iterations of Z-Wave technology, the 700-Series will allow for extended range and battery life when used with a compatible Z-Wave controller or hub. We hope to see 700-Series Z-Wave devices enter the market sometime in the not-so-distant future. Qolsys also made improvements to the IQ2 Z-Wave Diagnostics Map when using the Z-Wave 6.81 SDK to include RSSI values, as well as the ability to move automation device on the Diagnostics Map.

Some new 500-Series Z-Wave Plus devices are now supported by the IQ Panel 2. Most notably, these include Z-Wave switches from Eaton. Newly supported models include the RF9601, RF9617, RF9640-N, and RF9642-Z. It's good to see Qolsys increasing their support of compatible Z-Wave devices, and we have heard particularly nice things about the Z-Wave switches from Eaton and Cooper.

You can now disarm from the main IQ Panel 2 during the Exit Delay if the arming session was initiated from an IQ Remote, PowerG Keypad, or key fob device. Qolsys also added three (3) new Sensor Groups for keypads, key fobs, and panic switches. These new Sensor Groups include (3) Mobile Silent, (5) Fixed Silent Auxiliary, and (7) Mobile Silent Auxiliary. These new Sensor Group options should add some more versatility for these devices. And as for the Qolsys IQ Remote Keypad, it now has the ability to pair with IP routers using the Protected Management Frame (PMF) protocol.

Qolsys iq remote ag iq panel 2 remote touchscreen keypad

There are some new changes to the Easy Install Wizard that loads upon booting up the system for the first time. A new drop-down option will allow you to select one of (13) languages for the setup wizard. There is also a new page in the wizard with QR links for you to scan using the camera on your Android or iOS phone to quickly download the Alarm.com Mobile App. Also added to the Easy Install Wizard are new help screens that provide more information on how to pair and test door and window contacts and motion detection sensors.

Some general improvements to the system's PowerG firmware have also been bundled with Firmware Update 2.5.3. The PowerG Modem Firmware is now Version 2.38. There is now support for Fire Trouble and Dirty Detector Trouble on the IQ2 and ADC when DSC PG9936 PowerG Smoke Detectors are used. Proximity tag support is now supported with the Visonic PowerG Wireless Keypads (models KP141 and KP241). And the Alarm.com back end can now show the "Not Networked" status for PowerG Sensors in the Event History. This occurs when a PowerG device is enrolled with the panel, but then fails to complete the network association and goes into RF sensor failure.

There are also some changes affecting certain PowerG Door and Window Contact Sensors. For the DSC PG9309 and DSC PG9312, both the reed switch and the auxiliary input can be disabled during disarm. The same also applies to the auxiliary input on the DSC PG9945. The purpose of this is to extend the battery life on high traffic doors. Additionally, the PG9945 and PG9309 can be learned-in with the IQ2+ twice. One zone will be for the sensor's internal reed switch, which the other will be used with the auxiliary input.

Dsc pg9945 powerg 915mhz wireless door slash window contact


Other miscellaneous features have been added as well. LiveAnswer is now supported on the IQ2 for security cameras with non-standard aspect ratio streaming. New languages of German, Danish, Portuguese, Hungarian, and Romanian have all been added to the IQ Panel 2. The IQ2 will also now provide audible and visual indication of dual-path failures when the EN Grade 2 Setting is enabled. A change to the Swinger Shutdown feature has been made so that once a sensor reaches its Swinger Shutdown limit, a subsequent sensor event will tell the IQ2 to send an event notice to Alarm.com. Lastly, various improvements to the system have been made so that the IQ2 meets the EN50131-1 Standard.

Now that we have covered all of the new features included with Firmware Version 2.5.3, we can cover the process for upgrading your IQ Panel 2. Qolsys did things a little bit different this time. In order to download 2.5.3, your IQ Panel 2 or IQ Panel 2 Plus must be running a firmware version between 2.0.1 and 2.4.2. Do not attempt to download 2.5.3 if your IQ Panel 2 is running Firmware Version 2.5.0 or 2.5.1. If your IQ2 is on one of those firmware versions, then you must upgrade in stages by upgrading to Firmware Version 2.5.2 first, and then upgrading to Version 2.5.3. More information on upgrading to 2.5.2 can be found here.

If you need to check the firmware version for your panel, click the small grey bar at the top of the screen, and choose Settings > Advanced Settings > enter Installer Code (default 1111) > About > Software. You should see the firmware version displayed. The panel in the picture below is already on 2.5.3.


Once your IQ2 is on a firmware version of 2.0.1 to 2.4.2, or is on Firmware Version 2.5.2, then you can begin upgrading the Qolsys IQ Panel 2 Firmware Version 2.5.3. To begin, make sure your panel is monitored and connected with the Alarm.com servers via WIFI. The panel should be plugged into its AC outlet, and it should not have a low-battery condition.

When ready, you can perform the update by clicking the small grey bar at the top of the screen and selecting Settings > Advanced Settings > Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.5.3 > OK > Upgrade Using Network. Then press OK when prompted. It will take about five (5) minutes for the update process to complete. The panel will reboot as part of the update process.

If you have any questions about the Qolsys IQ Panel 2 Plus, please reach out to us. Also remember to check out this post to learn more about our monitoring plans for gaining access to Alarm.com. The best way to contact us with questions about the IQ Panel 2 System or alarm monitoring in general is to email support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , , , , , , , , ,

Comments


Posted By

Alarm Grid is thrilled to offer the brand-new Resideo Tuxedo Keypad! This sleek and modern keypad serves as a touchscreen controller for your Honeywell VISTA, while also providing Z-Wave Plus home automation capabilities. This will truly bring out the full potential of your VISTA Panel!


The new Resideo Tuxedo represents the third generation in the Honeywell Tuxedo Touch Series. The original Honeywell Tuxedo Touch, the Honeywell Tuxedo Touch WIFI, and the Honeywell VAM have all been discontinued to make room for the new Resideo Tuxedo. While we are a little sad to see these classic products be sent off to the "product graveyard", we are extremely excited about this brand-new keypad and what it brings to the party.

If you are familiar with the Honeywell 6290W Touchscreen Keypad that came out last September, then you will be pleased to learn that the new Resideo Tuxedo offers the exact same look and user interface (UI). In fact, the only difference between the two is the fact that the Tuxedo offers Z-Wave Plus functionality, while the 6290W is just a keypad for controlling the VISTA. With the Tuxedo, you get all of the same security functions from the 6290W (e.g. arming, disarming, bypassing zones), as well as awesome new home automation controls.

The great thing about a touchscreen keypad like the Resideo Tuxedo is that it can make your system much less intimidating and easier to control. This can be especially important for new users who are not used to working with a security system, especially one that uses a classic numeric keypad that requires specific knowledge to operate. The Tuxedo is easy to navigate, and the full-color menus can give a new user confidence in controlling their system. Most experienced users also appreciate touchscreen keypads just due to their overall ease of use.

You certainly have a great deal of automation devices that you can pair with the Resideo Tuxedo. Nearly any Z-Wave device can integrate with the keypad. You can add Z-Wave lights so that it looks like you're home while on vacation. A Z-Wave door lock can be helpful for letting your friend inside without getting up from the couch. And a Z-Wave thermostat can help you save a ton of money in energy costs, while still keeping your home comfortable. The unit supports up to 232 Z-Wave devices, so you're highly unlikely to run out of room. We recommend using exclusively Z-Wave Plus devices to build the strongest network possible.

WIFI connectivity returns to the new Resideo Tuxedo. The keypad uses its WIFI connectivity for communicating with Total Connect 2.0. You can access TC2 to control your programmed automation devices remotely from a mobile app or web browser. The WIFI connection is also how firmware updates are applied to the Tuxedo Keypad. You can alternatively use a wired ethernet connection instead of wireless WIFI, but come on, who's gonna do that? Just be aware that the Tuxedo is not an AlarmNet Communicator. You will still need a separate alarm communicator for your VISTA System and a monitoring plan to access Total Connect 2.0.

And there are many other features and specifications that we love about the new Tuxedo. This keypad and automation controller boasts a 7-inch screen with a 480 x 640 resolution. The thin-film-transitor (TFT) LCD screen is backlit, so you will have no trouble using it at night. Other features include voice and chime, a weather display, the ability to live-stream security cameras, Console Mode, a digital picture frame, and more!

You can buy the new Resideo Tuxedo Keypad from Alarm Grid right now. We are sure that you will love using this robust and powerful keypad in your home or office. It really has a nice modern look that can fit in nicely with any decor. This is truly a great way to improve upon a VISTA System. If you have any questions about the Tuxedo, or if you want to learn more about alarm monitoring, contact us via email at support@alarmgrid.com. We check our email during our business hours of 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , , , , ,

Comments


Posted By

After much anticipation, the DSC PG9WLSHW8 PowerG Wired to Wireless Converter is finally available! End users now how a reliable option for taking existing hardwired security and life-safety sensors and interfacing them with a security system that supports PowerG Wireless Sensors.


Wired to wireless converter modules for wireless security systems are nothing new. Hardwired sensors connect with wired to wireless converter modules. The converter then sends wireless signal to the panel on behalf of the connected wired sensors. The wired sensors can then be programmed to wireless zones on the system. As far as the system is concerned, the wired sensors at the converter module are no different than wireless sensors.

How the DSC PG9WLSHW8 differs from prior wired to wireless converters is that it transmits wireless signals across the PowerG wireless protocol. PowerG uses Frequency Hopping Spread Spectrum (FHSS) technology to prevent RF jamming, with the communication signals constantly switching between frequencies from 912 MHz to 918 MHz. In addition to using FHSS technology, PowerG Sensors also take advantage of military grade 128-bit AES encryption for enhanced wireless security. This makes these sensors some of the most secure wireless devices in the industry. Any hardwired sensor connected with the DSC PG9WLSHW8 will utilize this same level of security and protection.

But PowerG Sensors offer more than just top-grade security. They also offer incredible wireless range. Depending on the system being used, a PowerG Sensor is able to communicate from up to two (2) kilometers (km) away in an open air environment. This capability also applies to the DSC PG9WLSHW8. With perfect, direct line-of-sight, you can have the converter module up to 2km away from certain compatible panels and expect the signals to go through reliably. That is perfect for large buildings, including hospitals, warehouses, schools, and more. You would be very hard-pressed to find another wireless sensor lineup with the same communication range capabilities as PowerG.

There are all sorts of possible applications for the DSC PG9WLSHW8 Wired to Wireless Converter. But at this time, the module can only be used with a Qolsys IQ Panel 2 Plus Security System. All versions of the IQ Panel 2 Plus can support the DSC PG9WLSHW8. Please be aware that the IQ2+ has a smaller antenna than the other PowerG Systems, so its wireless range is limited to roughly 2,000 feet in open air. The other very important note is that the "other" PowerG Security Systems will NOT support the converter at this time. DSC says that support for these systems will be added later. These other potentially compatible systems include the DSC Iotega and the DSC PowerSeires NEO with an added PowerG Wireless Transceiver.

But there is so much else about the DSC PG9WLSHW8 that makes it such an exciting piece of equipment! Namely, the unit has four (4) programmable outputs (PGMs) for connecting relay-triggered devices. The second programmable output (PGM2) is particularly notable, as you can connect up to (18) 2-wire smoke detector units at this location. Alternatively, you can also use 4-wire smoke detectors and wired CO detectors are regular zone inputs for the unit. The PGMs are also useful for connecting wired sirens, as the unit provides a supervised bell output of 12V @ 700mA. And installers will really appreciate the fact that the module allows for end-of-line resistor (EOLR) value learning from 1k to 10k ohm resistors. Both single-end-of-line (SEOL) and double-end-of-line (DEOL) resistor wiring is supported.

One final and very important note about the DSC PG9WLSHW8 is that stock for the item is currently severely limited due to the ongoing pandemic. It's possible that if you order the PG9WLSHW8, you might be put on a waiting list for the item, as our manufacturers try and keep up with constant demand for products. If you do end up buying the DSC PG9WLSHW8 while it is back-ordered (BO), then our team will contact you at our earliest convenience to let you know about the situation. If you do decide to cancel the order due to it being back-ordered, then your debit or credit card will be refunded for the entire cost of the order.

If you have any questions about the DSC PG9WLSHW8 or about alarm monitoring in general, then please reach out to us! The best way to contact us is by emailing support@alarmgrid.com. This is also a great email to use if you want to find out if the DSC PG9WLSHW8 or any other product sold by Alarm Grid is currently in-stock or back-ordered. Our team checks email from 9am to 8pm ET M-F. We look forward to hearing from you!

Tags: , , , , ,

Comments


Posted By

If you have a home or business in Canada, and you are looking to receive central station monitoring service, then Alarm Grid is happy to help! Our company is proud to provide service through Rapid Response Monitoring Services (RRMS). We offer many system options for users in Canada.


Rapid Response has been protecting US and Canadian homes and businesses since 1992. The company consists of more than 550 highly trained experts who are dedicated to providing top-quality monitoring service for end users. Alarm Grid has hand-picked RRMS for the protection of our customers in Canada due to their proven success, expertise, and overall reliability.

There are currently two (2) central station locations operated by RRMS. These monitoring centers are located in Southern California (Rapid West in Corona, CA) and New York State (Rapid East in Syracuse, NY). Both monitoring centers are state-of-the-art, and they operate 24/7 for the protection of end users. We are highly confident in their ability to provide outstanding service at all times.

When an alarm or other important system condition is received by RRMS, a trained expert will immediately take action based on what is listed for the end user's monitoring account. This can include requesting immediate emergency dispatch, contacting the end user to make sure that everything is alright, or following other predetermined instructions. RRMS takes special precautions to prevent delays and ensure that help is sent out as soon as possible.

Having two (2) independent monitoring centers provides added redundancy for end users receiving central station service through RRMS. If one monitoring center goes offline for any reason, all incoming signals will be re-routed to the other monitoring center to ensure that end users receive the help that they need. This aspect was essential in Alarm Grid choosing to work with RRMS.

Although the RRMS monitoring centers are located in the United States, they will have no trouble reaching out to jurisdictions throughout Canada and providing necessary assistance. Remember, the exact location of a monitoring center is not very important. What is important is that the monitoring center is able to reliably receive incoming signals and take appropriate action when emergencies occur. And RRMS has that aspect nailed.

It is important to remember that Alarm Grid customers who receive central station monitoring service in the United States will continue to receive service through Criticom Monitoring Services (CMS). We are extremely confident in both our primary monitoring partners CMS for customers within the United States, and RRMS for customers in Canada. To learn more about CMS, we recommend checking out this helpful FAQ.

Of course, a good monitoring station is only one step in the process. You also need a capable security system that can reliably send out signals. And Alarm Grid has that aspect down as well. The options for users in Canada are slightly different than those for users in the United States. We'll cover some of the most popular options below, but we recommend checking this blog post for more complete info on what we can offer for users in Canada.

The ultimate option for Alarm Grid Monitoring Service in Canada is arguably the AT&T LTE Version of the Qolsys IQ Panel 2 Plus. The reason why this system works so well is because its built-in AT&T LTE Communicator will roam to the Rogers LTE Network in Canada with no extra charges. And since it also has built-in WIFI, you will get dual-path connectivity right out of the box. Just remember that your will need a monitoring plan that includes cellular service.

Qolsys iq panel 2 verizon 7 security panel w slash z wave ready

If you are looking to save money with internet-only monitoring, then the Honeywell Lyric is a great option. Unlike the Alarm.com Panels, the Lyric System can connect with the Resideo AlarmNet360 Servers through exclusively internet protocol (IP), without having a cellular communication path set up. This can save you money, as IP-only plans are typically less expensive than cellular plans. But remember, an internet outage will leave you unmonitored!

Honeywell lyric controller encrypted wireless security system

Also keep in mind that it is possible to receive alarm monitoring without service through a central station. This is called self-monitoring, and it involves having the end user receive text and/or email alerts when system activity occurs. Using this option it is solely up to the end user to request their own help in an emergency situation. Alarm Grid offers various self-monitoring plans if you do not want to receive central station service through Rapid Response.

If you have any questions about Rapid Response, or if you want to learn more about security panels or alarm monitoring service in general, please reach out to us! The best way to contact our team is to email us at support@alarmgrid.com. We check our email during our usual business hours of 9am to 8pm ET M-F. We look forward to hearing from you!

Note: If you receive central station service through Rapid Response, make sure to save the phone number (800) 932-3822 in your phone. This the phone number that RRMS will use to call you in the event of an emergency. It is very important that you know that this number is not a telemarketer!

Tags: , , , , , , , , , ,

Comments


Posted By

Alarm Grid is now offering bundled versions of the Honeywell Lyric Alarm System that include the panel and a compatible LTE cellular communicator. The LYRICUPGRADE-A will have the LYRICLTE-A AT&T LTE Communicator, and theLYRICUPGRADE-V will feature the LYRICLTE-V Verizon LTE Communicator.

Honeywell lyric controller encrypted wireless security system

If you hang around our website regularly, then you probably already know that Lyric System Kits are nothing new for us. But these are fairly unique in that they offer just the system and communicator, without any new sensors. You might want to get one of these kits if you are upgrading from an older LYNX Touch System that can't receive a firmware update, such as a Honeywell L5100 System. The Lyric can support the vast majority of the Honeywell 5800 Sensors used with the older LYNX Touch Systems.

The reason why we decided to release these new Lyric Upgrade Kits is due to the 3G sunset that will be happening in 2022. Older cellular networks are being shut down, and many users are scrambling to find LTE options for their systems. With one of these new kits, you will be getting a Lyric System that is dual-path ready with both WIFI and LTE cellular connectivity. This is the best way to ensure that your panel stays reliably monitored, keeping any potential downtime to an absolute minimum.

The Lyric System offers some great features, such as a 7-inch touchscreen display, support for encrypted Honeywell SiX Series Sensors, connectivity with Total Connect 2.0, the ability to interface with Apple HomeKit, built-in Z-Wave functionality, a 2MP camera for taking disarm photos, and so much more. It truly is a state-of-the-art security system, and it can make a great addition to your home or business.

If you are interested in learning more about the Honeywell LYRICUPGRADE-A or Honeywell LYRICUPGRADE-V, or if you want to know more about monitoring service in general, please email us at support@alarmgrid.com. We check new email from 9am to 8pm M-F, and we always do our best to respond as quickly as possible. We look forward to hearing from you!

Tags: , , , , , , , , ,

Comments